Hellow everyone,
I am really searching to find something good to protect my Htc One but in the same time to not make it double or triple of it;s original size.
I was seeing the Incipio Products Like Feather, Frequency And Carbon Fiber , also the Htc One Original Cases .Plus would be nice to buy these alluminiun cases??? What you would suggest me to buy. By the way along with the case i am planning to buy a screen protector like the Mime Ghost Glass for Htc one.
Your Opinions would be very helpfull.
I bought this case: http://www.amazon.com/Poetic-FlipBo...qid=1377379829&sr=8-3&keywords=htc+one+poetic
It's slim and looks good. Doesn't provide a crazy amount of protection but it's enough for me to not worry about it in my pocket or setting it down anywhere, and I like the flipbook style. You can also still use a screen protector with it.
bluetint said:
I bought this case: http://www.amazon.com/Poetic-FlipBo...qid=1377379829&sr=8-3&keywords=htc+one+poetic
It's slim and looks good. Doesn't provide a crazy amount of protection but it's enough for me to not worry about it in my pocket or setting it down anywhere, and I like the flipbook style. You can also still use a screen protector with it.
Click to expand...
Click to collapse
funny, on this link, with the phone in the case, it looks like there are cut-outs for the camera (and the noise cancellation mic), but there is on picture of the entire case without the phone in it, and there appears to be no cutouts for the camera. I would imagine that there ARE cutouts for the camera, no?
TheKaz said:
funny, on this link, with the phone in the case, it looks like there are cut-outs for the camera (and the noise cancellation mic), but there is on picture of the entire case without the phone in it, and there appears to be no cutouts for the camera. I would imagine that there ARE cutouts for the camera, no?
Click to expand...
Click to collapse
Yes, there are two cutouts on the back: one for the camera/flash and another for the mic. You're right though, the pics are misleading. I had seen this case in the wild before I bought it so I knew what I was getting. Also for that price you can't really go wrong.
Do not go incipio the design comes off and it looks like ****
Sent from my HTC One using ViperOne
SMJx said:
Do not go incipio the design comes off and it looks like ****
Sent from my HTC One using ViperOne
Click to expand...
Click to collapse
Well i was thinkinh the Incipio Dual Pro with Silicone...
Just tried a skin and bumper combo. Best compromise between protection and looks IMO. Nothing will top an otterbox for protection, but makes phone very bulky and it overheats too easily when using navigation.
http://forum.xda-developers.com/showthread.php?p=44946148
Sent from my HTC One using xda premium
http://www.amazon.de/URBAN-ARMOR-CO...377460215&sr=8-2&keywords=htc+one+hülle+urban
this one I got a few weeks back, and it is the best case I could imagine for the One! Protection all around, wrapping over the edgres where the screen is. All buttons covered solid, and these covers help to push the Power/Vol buttoms. I can only say, I am totally happy with this case! A bit pricey, but worth every penny. Gives the One a real trendy look, and is available in different colours- I got the black/black one
dreico33 said:
Well i was thinkinh the Incipio Dual Pro with Silicone...
Click to expand...
Click to collapse
I have that and the design on the back totally wears off. Do NOT NOT NOT go with those
SMJx said:
I have that and the design on the back totally wears off. Do NOT NOT NOT go with those
Click to expand...
Click to collapse
Men u got me scared now.. haha...
What you would suggest???
What about this one????
http://dx-box.com/new-htc-one-double-dip-hard-shell-case-back-cover-hc-c840.html
Or these ones???
http://tpu-cases.com/index.php?main...id=341&zenid=5f996086e5e55efe16801fe09f74e9fd
http://tpu-cases.com/index.php?main...id=338&zenid=5f996086e5e55efe16801fe09f74e9fd
dreico33 said:
Men u got me scared now.. haha...
What you would suggest???
What about this one????
http://dx-box.com/new-htc-one-double-dip-hard-shell-case-back-cover-hc-c840.html
Or these ones???
http://tpu-cases.com/index.php?main...id=341&zenid=5f996086e5e55efe16801fe09f74e9fd
http://tpu-cases.com/index.php?main...id=338&zenid=5f996086e5e55efe16801fe09f74e9fd
Click to expand...
Click to collapse
Those look much nicer, there is no design to wear off, check out UAG though.
dreico33 said:
Well i was thinkinh the Incipio Dual Pro with Silicone...
Click to expand...
Click to collapse
I had this case and I don't know if anyone else had this problem but whenever I took a picture with the flash there was a tinge around the picture from the silicone of the case.
Sent from my HTC One using XDA Premium 4 mobile app
Check this one : http://www.rockphone.cn/en/Html/Product/507.html
I really like it, slim, look good.
I have the orange and black.
I have tried these cases/covers
KLD Series ENLAND
http://www.youtube.com/watch?feature...&v=xggUZCcBcww
Diztronic
http://tpu-cases.com/index.php?main_...ex&cPath=48_86
Case Mate
http://www.case-mate.eu/smartphone/htc/htc-one.html
Rock
http://www.rockphone.cn/en/Plus/Sear...p?pID=12&bID=0
Spigen Ultra Thin Air
http://www.spigen.com/cell-phone/htc/htc-one.html
Poetic Atmosphere
http://www.yourpoetic.com/c/77/htc-one-m7
Meifeng Matte Hard Skin Cover Case
http://www.youtube.com/watch?v=A1G-Tc72ZvQ
You can get these in any size you want, Just send the measurements with the case/phone
Leather HTC One Wallet case
http://www.etsy.com/listing/12804165...e?ref=col_view
HTC ONE leather case - Italian leather
http://www.etsy.com/listing/15309752...r?ref=col_view
Simple black leather iPhone wallet case
http://www.etsy.com/listing/11499042...e?ref=col_view
Hip iphone wallet
http://www.etsy.com/listing/86702111...k?ref=col_view
Steampunk smart phone
http://www.etsy.com/listing/11228484...n?ref=col_view
Leather iPhone case
http://www.etsy.com/listing/15394704...4?ref=col_view
iPhone/iPod Case - Charcoal Wool Felt and Black Leather
http://www.etsy.com/listing/64894463...d?ref=col_view
Related
I really like the way the bumper for the Nokia Lumia 900 looks. Protects the sides and corners of the phone and takes up less space than a full-blown silicon case. It's $20 though through AT&T. Would make a great accent to your phone if you but the black or white Lumia.
I put it on my phone to try it out. Didn't like it like it because it didn't raise the phone up the protect the chrome price around the camera. I opt for a full case in which I like
Sent from my Lumia 900 using XDA Windows Phone 7 App
The bumper is cheaply made and covers the hard keys on the side with rubber. I absolutely hate that.
liked mine
liked mine, it's much better than a case - a case hides too much of the beauty of the phone. I paired my bumper with a full body Zagg protector, so the chrome on the back is fully covered up. The zagg protector also has a nice feel to it.
jkkw said:
liked mine, it's much better than a case - a case hides too much of the beauty of the phone. I paired my bumper with a full body Zagg protector, so the chrome on the back is fully covered up. The zagg protector also has a nice feel to it.
Click to expand...
Click to collapse
will probably be doing the same if i get this phone
i originally didn't like that it covered the keys, but i actually find them easier to use with the bumper on, but i do wish it raised the back of the phone up just a little bit to protect the camera strip.
adiliyo said:
i originally didn't like that it covered the keys, but i actually find them easier to use with the bumper on, but i do wish it raised the back of the phone up just a little bit to protect the camera strip.
Click to expand...
Click to collapse
it also prevents dust from getting in the phone
Why not get an invisible shield and the bumper?
Sent from my Nokia Lumia 900 using XDA Windows Phone 7 App
Can u guys post some picture on how it look like?
kylengai said:
Can u guys post some picture on how it look like?
Click to expand...
Click to collapse
+1 on this
The full case is the same as the N9, correct? Any word on price?
Cases
kylengai said:
Can u guys post some picture on how it look like?
Click to expand...
Click to collapse
stratax said:
+1 on this
Click to expand...
Click to collapse
Naked:
Black GEL TPU case sold at AT&T - $20(Personal Fav, can't even tell there's a case on the phone):
Cyan GEL TPU bumper sold at AT&T - $20:
Case Mate "Pop Case" with kickstand sold at AT&T - $35: (DO NOT RECOMMEND! IT WILL SCRATCH YOUR PHONE AND ADD HUGE BULK!)
Sorry about the bad pics. Used my old trusty HD7.
I also grabbed the full body Zagg Shield, but haven't installed it yet. Not sure if I will...
It it is the one in store the dry zagg, don't bother. The wet one goes all the way around the sides to the screen. The dry one has an annoying rough texture and only comes a little ways up the sides.
Nissan350 said:
Naked:
Sorry about the bad pics. Used my old trusty HD7.
I also grabbed the full body Zagg Shield, but haven't installed it yet. Not sure if I will...
Click to expand...
Click to collapse
nice pictures! thanks for uploading them, the bumper looks great
hx4700 Killer said:
It it is the one in store the dry zagg, don't bother. The wet one goes all the way around the sides to the screen. The dry one has an annoying rough texture and only comes a little ways up the sides.
Click to expand...
Click to collapse
Hmm.. it is the dry one. Thanks for the heads up!
stratax said:
nice pictures! thanks for uploading them, the bumper looks great
Click to expand...
Click to collapse
Thanks! Not a problem! Yes, the bumper looks great on the phone, but I probably wont be using it much seeing how it doesnt protect the camera lense in the back... or the entire back for that matter.
+1 on the Gel case. I got one for mine and its easily the best gel skin i've ever place on a phone. Can't even tell its there.
provenflipper said:
+1 on the Gel case. I got one for mine and its easily the best gel skin i've ever place on a phone. Can't even tell its there.
Click to expand...
Click to collapse
Ditto. Its super thin and feels exactly like the Polly-carbonate that the phone is made of. PLUS it raises the lens off the surface when you have it laying flat.
I'm digging my black gel case. It protects the back of the phone nicely.
Is anyone else having an issue with the top of the gel case not allowing the USB cable to insert fully and make good contact?
Sometimes I have to fiddle with it a bit to make contact and intiate the sync or charge.
i love how you can make the phone stand straight up without it falling since the bottom is flat lol
I have the black Nokia Lumia 900. How does the cyan gel skin look on it? I'm thinking about getting that combo.
Anyone know if there is a chance of getting bumpers made for the One? This phone looks too good to cover up but it would be nice to have minimal protection.
rank78 said:
Anyone know if there is a chance of getting bumpers made for the One? This phone looks too good to cover up but it would be nice to have minimal protection.
Click to expand...
Click to collapse
I would expect to see the Poetic Borderline from Poetic. They had it for the N4.
Wow those are new to me, very slick.
The poetic borderline and atmosphere cases are under $10 on Amazon
Sent from my EVO using Tapatalk 2
surely those will look stupid with the phone's curved back?? :s
The borderline case looks a bit "stupid," especially on the top and bottom. The atmosphere in the other hand, actually looks really good. So good, I already ordered one.
Sent from my EVO using Tapatalk 2
eg1122 said:
The borderline case looks a bit "stupid," especially on the top and bottom. The atmosphere in the other hand, actually looks really good. So good, I already ordered one.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
hmm thats certainly a much more attractive option.
is the back just clear plastic though? why is the upper right one larger, there's a microphone there isnt there?
the only things that put me off getting a case is that a) the device gets bigger and b) it no longer fits into docks etc.
Case is completely clear except for the sides. And great the hole on the top right is bigger because if the Mic. As far as adding bulk, the case not as thick as you might think. I've seen these cases on the iPhone and it looks really good. I like the fact that its clear and the look of the phone is retained. Personally I just use a case when I'm not home or at work.
Sent from my EVO using Tapatalk 2
eg1122 said:
Case is completely clear except for the sides. And great the hole on the top right is bigger because if the Mic. As far as adding bulk, the case not as thick as you might think. I've seen these cases on the iPhone and it looks really good. I like the fact that its clear and the look of the phone is retained. Personally I just use a case when I'm not home or at work.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I hate cases but have to them for work only a bumper case might be cool tho.. nice to see your getting one EG
Sent from my EVO using Tapatalk 2
If you were to accidentally drop the phone while it had one of those Poetic Borderline cases on it, and it landed flat on its back, would the first thing to hit the floor be part of the bumper or part of the phone?
Shasarak said:
If you were to accidentally drop the phone while it had one of those Poetic Borderline cases on it, and it landed flat on its back, would the first thing to hit the floor be part of the bumper or part of the phone?
Click to expand...
Click to collapse
Of course bumper, check the design you'll see it clearly.
Bumper cases are nice but HTC's own flip case will look classy.
Dharkan said:
Of course bumper, check the design you'll see it clearly.
Bumper cases are nice but HTC's own flip case will look classy.
Click to expand...
Click to collapse
dont be so sure about the flip case
first impressions from those who have them are bad - shame really as I am getting one for free and the stand aspect is really nice.
ill be going with my usual very low profile case w/ screen protector combo and then after maybe 6 months take the case off!
djbenny1 said:
dont be so sure about the flip case
first impressions from those who have them are bad - shame really as I am getting one for free and the stand aspect is really nice.
ill be going with my usual very low profile case w/ screen protector combo and then after maybe 6 months take the case off!
Click to expand...
Click to collapse
The flip case will serve a purpose but I wouldn't have it for everyday use, its basically thick card with microfibre lining.
I've posted a few pics of the HTC Flip case
Check out my post. It's #849 http://forum.xda-developers.com/showthread.php?t=2187323&page=85
Dharkan said:
Of course bumper, check the design you'll see it clearly.
Bumper cases are nice but HTC's own flip case will look classy.
Click to expand...
Click to collapse
It's anything but clear in the photos that I've seen. On most phones bumpers certainly will protect the phone if it's dropped on its back, but most phones don't have anywhere near as much curvature on the back of the case as the One has - a bumper would have to stick out a long way at the edge in order to protect the middle.
Finally a case with a kickstand.
http://pages.ebay.com/link/?nav=item.view&id=261651683480&alt=web
*Finally, a rugged case.
PowerLemons said:
*Finally, a rugged case.
Click to expand...
Click to collapse
Amen! Mine should arrive next week!
That is one ugly case and does not look comfortable to hold at all.
I had one for the note 3. It really wasn't that bad.
Crisisx1 said:
That is one ugly case and does not look comfortable to hold at all.
Click to expand...
Click to collapse
PowerLemons said:
*Finally, a rugged case.
Click to expand...
Click to collapse
If only they didn't have a stand, I would totally get it. I want a fully rugged case that doesn't feel tacky and about to fall apart like the TUDIA Dual.
Fugly case, it's a shame spigen refused to step up and produce a case.
disk0360 said:
Fugly case, it's a shame spigen refused to step up and produce a case.
Click to expand...
Click to collapse
Seriously.. I'm mad at them.
Or their ultra crystal screen protector. I love those.
Sent from my Nexus 4 using XDA Free mobile app
Ugly or not I'm looking for more protection and I have one of these on the way. I'll take some good pics for you guys when it comes. I got the red version.
Update: case came this morning. It's not as ugly as I thought, but it is a tad thick where the kickstand is. Good protection.. Better than my Ringke fusion and Tudia. I'm at work right now but will get some pics taken and posted later.
I agree. Who cares what it looks like: function > form. Let me know how it works out I may purchase one also.
Thanks
Ok here's the pics. I'm not happy with them but hopefully they will be good enough for you guys. I took them at work in a real hurry before my boss could appear and say "wtf are you doing?"
A few quick notes about the case:
-Good protection, higher edges around screen than my other cases.
-Power button feels pretty good but volume buttons are stiff and a bit mushy.
-Holes for the phone ports are of ample size.
-Case feels ok in my pocket but the thickness of the kickstand area IS noticeable even though I always have the screen side against my thigh.
-The kickstand is actually my first on any phone or tablet. It "locks" in the closed position with a snap. When trying to pull it out, it feels like it will break before it "snaps free" and folds out. Maybe it will, maybe it wont... I didn't buy the case for the kickstand anyway so I'm not worried about it.
Here's the pics.
Azlum said:
Ok here's the pics. I'm not happy with them but hopefully they will be good enough for you guys. I took them at work in a real hurry before my boss could appear and say "wtf are you doing?"
A few quick notes about the case:
-Good protection, higher edges around screen than my other cases.
-Power button feels pretty good but volume buttons are stiff and a bit mushy.
-Holes for the phone ports are of ample size.
-Case feels ok in my pocket but the thickness of the kickstand area IS noticeable even though I always have the screen side against my thigh.
-The kickstand is actually my first on any phone or tablet. It "locks" in the closed position with a snap. When trying to pull it out, it feels like it will break before it "snaps free" and folds out. Maybe it will, maybe it wont... I didn't buy the case for the kickstand anyway so I'm not worried about it.
Here's the pics.
Click to expand...
Click to collapse
Can you take a pic of the phone out of the case next to the case from the side, id like to see how thick it is compared to the phone.
Just ordered the white version, will come on standard shipping for around 7 days, no biggie while I wait for my TUDIA to arrive.
http://www.amazon.ca/JKase-DIABLO-R...&qid=1416026291&sr=8-4&keywords=jkase+oneplus
I had one of these on the RAZR i.
Not bad cases, can pop the rubber bit off and use just the hard shell.
Best hard cover Frosted Matte
Sended from china, 4 weeks wait, but very very good material !!
http://www.ebay.com/itm/Afan-Froste...t=US_Cell_Phone_PDA_Cases&hash=item27e8211eec
What are the differences between this two cases?
www.amazon.co.uk/gp/aw/d/B00P6TT6FK/ref=mp_s_a_1_1?qid=1416596545&sr=8-1&pi=AC_SY200_QL40
www.amazon.co.uk/gp/aw/d/B00P1T3HOQ/ref=mp_s_a_1_3?qid=1416596471&sr=8-3&pi=AC_SY200_QL40
akiscoolio said:
What are the differences between this two cases?
www.amazon.co.uk/gp/aw/d/B00P6TT6FK/ref=mp_s_a_1_1?qid=1416596545&sr=8-1&pi=AC_SY200_QL40
www.amazon.co.uk/gp/aw/d/B00P1T3HOQ/ref=mp_s_a_1_3?qid=1416596471&sr=8-3&pi=AC_SY200_QL40
Click to expand...
Click to collapse
Don't think cruzerlite has this case... Check their site.
Sent from my OnePlus One using Tapatalk VIP
i really hope other manufactures like spigen *cough* *Cough* support the opo, ive been using the nillkin snap one case and my opo fell from me a couple times and my bezel has taken the abuse : /
Threeoaks said:
i really hope other manufactures like spigen *cough* *Cough* support the opo, ive been using the nillkin snap one case and my opo fell from me a couple times and my bezel has taken the abuse : /
Click to expand...
Click to collapse
I don‘t think that manufacturers like spigen or otterbox will ever make cases for the opo they support devices that have more buyers like samsung or apple, anyway the most protective cases for opo are jkase diablo,diztronic ultra and tudia slimfit which do you prefer?
Awesome review.
tdamocles said:
I had one for the note 3. It really wasn't that bad.
Click to expand...
Click to collapse
that has got to be the best backhanded compliment i have ever heard. "wasn't that bad" I mean that is awesome. It's like saying, "well, the amputation went pretty well. He won't miss the limb at all."
I say this NOT sarcastically at all. I almost spit out what I was drinking because I was laughing so hard when I read this.
Hey ppl I'm new with my OnePlus just wanting to know what are this best cases I can get with this phone that offers max protection and durability cause using this phone for the short time I've had it so far has been hands down the best android phone I've ever had so I wanna protect it what do u guys recommend? Thanks
Sent from my A0001 using XDA Premium HD app
Diztronic, hands down.
you might consider Tudia Ultra tough, but it's bulky.
What about flip case? Does anyone have any experience with good brands?
I'm looking for something like this:
http://www.ebay.com/itm/For-OnePlus...t=LH_DefaultDomain_0&var=&hash=item58b4d13365
http://www.amazon.com/OnePlus-One-Case-Revolution-Manufacturer/dp/B00TL4EUW0
I recommend this case and a tempered glass protector, you just rip out the plastic one in the case
spiderjerusalem said:
http://www.amazon.com/OnePlus-One-Case-Revolution-Manufacturer/dp/B00TL4EUW0
I recommend this case and a tempered glass protector, you just rip out the plastic one in the case
Click to expand...
Click to collapse
I didn't like that one. I ordered this one: http://m.ebay.com/itm/181532810218?_mwBanner=1
And the screen protector: http://m.ebay.com/itm/271845140819?_mwBanner=1
I got this yesterday in mail (black and white colour). Very happy with the quality and all the ports/mic holes perfectly centered. sturdy feel. I dropped my phone 3 times without the case (luckily not much damage at all.. just minor ding on corner) and then i thought of buying a case before it has spider web screen.
http://www.ebay.com/itm/NEW-GRENADE...t=LH_DefaultDomain_0&var=&hash=item43d2f6441d
Cruzerlite Bugdroid
I have been using the Cruzerlite Bugdroid TPU case. It has a slim profile while feeling quite sturdy and able to withstand a drop. All my friends who have the OnePlus One have this case. It comes in a very very wide variety of colors, too. The only downside is that it does fade after a while, but it really isn't that bad or too noticeable. The price is very reasonable for the quality of the product. It is easy to find on Amazon.
Hope this helps.
hp13 said:
I got this yesterday in mail (black and white colour). Very happy with the quality and all the ports/mic holes perfectly centered. sturdy feel. I dropped my phone 3 times without the case (luckily not much damage at all.. just minor ding on corner) and then i thought of buying a case before it has spider web screen.
http://www.ebay.com/itm/NEW-GRENADE...t=LH_DefaultDomain_0&var=&hash=item43d2f6441d
Click to expand...
Click to collapse
That is a horrible looking case[emoji21] why would you hide the design of your phone with that? Get a Tudia TPU case and you should be fine.... Oh God.
Jess813 said:
That is a horrible looking case[emoji21] why would you hide the design of your phone with that? Get a Tudia TPU case and you should be fine.... Oh God.
Click to expand...
Click to collapse
I think that and the Tudia cases are ugly lol. Personally prefer the Diztronic or the Orzly fusion cases
Galactus said:
I think that and the Tudia cases are ugly lol. Personally prefer the Diztronic or the Orzly fusion cases
Click to expand...
Click to collapse
Agreed, they're not the best looking they were the first to pop into my head, but come on man, that case on eBay he posted....[emoji40] .
Jess813 said:
Agreed, they're not the best looking they were the first to pop into my head, but come on man, that case on eBay he posted....[emoji40] .
Click to expand...
Click to collapse
Lool agreed
Sent From My OnePlus One
I ordered thr bugdroid...but i dont like it..so i ordered a Pelosi with sandstone back...i like it...but case can't really protect our phone if you make it drop ...waiting for the Nilkin zone...i ordered a black one & a red one. I really miss my Spigen cases i had on m'y N5 and GS2
Nillkin frosted is the best
4unwired said:
Diztronic, hands down.
Click to expand...
Click to collapse
Agreed, Diztronic ftw... dirt cheap but very good, even fast shipping (7 days to the Netherlands, NEVER longer... ordered like 6 different times)
http://www.tpu-cases.com/index.php?main_page=product_reviews&cPath=104_105&products_id=418
Make sure you get the one I linked to, with the slightly bigger corners, better protection
I've had the Diztronic case for around 7 months now and it's been perfect. Protected when dropped, not too bulky, slight raised lip on screen side to protect screen when placed screen face down.
The only negative I can think of is that it does add a bit of weight to the phone, although I'm sure that is inevitable based on the protection it gives and also the sturdy nature of the material it is made from.
takkischitt said:
I've had the Diztronic case for around 7 months now and it's been perfect. Protected when dropped, not too bulky, slight raised lip on screen side to protect screen when placed screen face down.
The only negative I can think of is that it does add a bit of weight to the phone, although I'm sure that is inevitable based on the protection it gives and also the sturdy nature of the material it is made from.
Click to expand...
Click to collapse
Exactly... you want protection? Then you're gonna feel it
Try a casemate barely there on your phone and see if it protects... makes me wanna cringe immediately
I wouldn't wanna droptest with that on, or any other "lookyoucanhardlyseeandfeelmebecauseIamsothin" case
if you like TOTAL protection i recommend TWO cases TUDIA OMNIX and POETIC. i have the TO and my experience to it is that the covers of the audio and charger ports are not good if you use them for a prolong period of time they dont go back easily i mean there is a small part of the cover that tends to stay open.
FOR POETIC, i saw reviews both Oneplus.net and amazon they say that it is much better than TO it is much thin than the TO and the ports are much better.
Another great feature about the Diztronic is the way it covers the side buttons and gives them a more sturdy feel. I got another case previously and it had cut out for the buttons, but it was a pain trying to press them as the OnePlus One's side buttons are so small.
Sent from my OnePlus One
If anyone is looking to get rid of their OEM orange and yellow cases, I would be willing to buy. Message me if anything.
Sent from my A001 using XDA Free mobile app
Official Smoke Case
by OnePlus
Official Flip Case
by OnePlus
Official Clear Case
by OnePlus
InvisiCase
by Orzly
ExecArmour
by Orzly
Wallet Case
by Orzly
FlexiCase
by Orzly
FlexiSlim
by Orzly
FlexiCase Blue
by Orzly
Fusion Bumper
by Orzly
Lucion
by Tudia
Arch
by Tudia
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
ghettopops said:
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
Click to expand...
Click to collapse
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Waterdroid said:
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Click to expand...
Click to collapse
I sent them an email with the same photo's, they are refunding my money. Pretty stand up.
Now I need to find a bumper.
Here you go!
I ordered orzly fusion bumper case, its on the way.
Sent from my ONE A2003 using Tapatalk
ghettopops said:
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
Click to expand...
Click to collapse
Thats a shame! I just got in the Orzly fusions and they fit way better than that
Space saver
Waterdroid said:
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Click to expand...
Click to collapse
DustinDep said:
Thats a shame! I just got in the Orzly fusions and they fit way better than that
Click to expand...
Click to collapse
Last I looked didn't that case take like 3+ weeks for delivery?
I just got my OP2 and my accessories at the same time now! I have the Dual Layer Defender Protective Case Cover with Kickstand and damn it's bulky and hard to hold in my hand. I had a MI3 and OPO naked before (broke both phones and now I've learned my lesson) but I've been stuck with a 5C for a week. Hopefully I get used to the size and heft again of a 5.5", though this is the heaviest phone of all...
http://www.amazon.com/gp/product/B00YM3WQ12?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00'
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Mersine said:
I just got my OP2 and my accessories at the same time now! I have the Dual Layer Defender Protective Case Cover with Kickstand and damn it's bulky and hard to hold in my hand. I had a MI3 and OPO naked before (broke both phones and now I've learned my lesson) but I've been stuck with a 5C for a week. Hopefully I get used to the size and heft again of a 5.5", though this is the heaviest phone of all...
http://www.amazon.com/gp/product/B00YM3WQ12?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00'
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Click to expand...
Click to collapse
Why don't you look at tudia or better otterbox
Sent from my SM-G900H using XDA Free mobile app
I returned the Dual Layer Defender Protective Case Cover with Kickstand because it's too bulky and really like the One Plus's translucent gray case
Mersine said:
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Click to expand...
Click to collapse
Many reviews of the gray case put it over stylecover but webstie says "Please note that to use this case you will need to remove the device's StyleSwap Cover as it is designed to snugly contour the OnePlus 2 without adding extra bulk." could you put picture with this case as recommended by one plus ? I am interested in i=this one
cedric1918 said:
Many reviews of the gray case put it over stylecover but webstie says "Please note that to use this case you will need to remove the device's StyleSwap Cover as it is designed to snugly contour the OnePlus 2 without adding extra bulk." could you put picture with this case as recommended by one plus ? I am interested in i=this one
Click to expand...
Click to collapse
I've attached pictures of my phone and the case with my stock back cover and without (you can see my serial). It is very weird without. I can definitely feel the back as hollow and missing something. I'd advise to keep it on, it is as slim as can be. That's odd the website would say that if it fits without the back cover on.
I bought the Diztronic tpu case because I had it for the OnePlus and was very satisfied. Although it is roughly the same case as for the opo the finishing is not as good. There is a shiny edge where the camera is, which could have worked out great but just is not. The case is also not as tight as for the opo and corners will slip off the phone when getting it out of your pocket. On the other hand the case is still from a very durable shock absorbing material and the edge that stands out over the screen makes sure that the glass doesn't shatter when you drop it. The thing I like about it most is the fact that it simply makes the OnePlus look more humble. No thrills just a nice phone. All and all a good case but not as good as its predecessor.
im not happy with this at all..i have the black apricot..it is quite a bit thicker than the sandstone..im very disappointed in oneplus to sell styleswaps with different thicknesses..
I have both the orzly invisicase and fusion bumper..
with the invisicase..it loses the facedown protection..the screen comes out on top of the edges..because its too tight..the corners/edges will slipp off with a small touch..
with the fusion bumper..you clearly see it doesnt fit the contours of the device..especially at the cutouts and the top&bottom..
also the cutout for the usb port is too small for the standard oneplus cable (have to use some force) ..while its cut perfectly for the usb cables orzly is selling..
basically..these cases are only designed to use with the standard sandstone styleswap while intended for the other styleswaps..
Has anyone got the spigen rugged case?
rosswaa said:
Has anyone got the spigen rugged case?
Click to expand...
Click to collapse
I also want to know this...
Sent from my ONE A2005 using XDA Free mobile app
Talesofanobody said:
I also want to know this...
Sent from my ONE A2005 using XDA Free mobile app
Click to expand...
Click to collapse
I've just ordered it, so if no one else does I'll get a mini review type thing when it arrives sorted
rosswaa said:
I've just ordered it, so if no one else does I'll get a mini review type thing when it arrives sorted
Click to expand...
Click to collapse
Alright, thanks
Sent from my ONEPLUS A2005