Develop Bugs

Suggest Of A Case

Hellow everyone,
I am really searching to find something good to protect my Htc One but in the same time to not make it double or triple of it;s original size.
I was seeing the Incipio Products Like Feather, Frequency And Carbon Fiber , also the Htc One Original Cases .Plus would be nice to buy these alluminiun cases??? What you would suggest me to buy. By the way along with the case i am planning to buy a screen protector like the Mime Ghost Glass for Htc one.
Your Opinions would be very helpfull.

I bought this case: http://www.amazon.com/Poetic-FlipBo...qid=1377379829&sr=8-3&keywords=htc+one+poetic
It's slim and looks good. Doesn't provide a crazy amount of protection but it's enough for me to not worry about it in my pocket or setting it down anywhere, and I like the flipbook style. You can also still use a screen protector with it.

bluetint said:
I bought this case: http://www.amazon.com/Poetic-FlipBo...qid=1377379829&sr=8-3&keywords=htc+one+poetic
It's slim and looks good. Doesn't provide a crazy amount of protection but it's enough for me to not worry about it in my pocket or setting it down anywhere, and I like the flipbook style. You can also still use a screen protector with it.
Click to expand...
Click to collapse
funny, on this link, with the phone in the case, it looks like there are cut-outs for the camera (and the noise cancellation mic), but there is on picture of the entire case without the phone in it, and there appears to be no cutouts for the camera. I would imagine that there ARE cutouts for the camera, no?

TheKaz said:
funny, on this link, with the phone in the case, it looks like there are cut-outs for the camera (and the noise cancellation mic), but there is on picture of the entire case without the phone in it, and there appears to be no cutouts for the camera. I would imagine that there ARE cutouts for the camera, no?
Click to expand...
Click to collapse
Yes, there are two cutouts on the back: one for the camera/flash and another for the mic. You're right though, the pics are misleading. I had seen this case in the wild before I bought it so I knew what I was getting. Also for that price you can't really go wrong.

Do not go incipio the design comes off and it looks like ****
Sent from my HTC One using ViperOne

SMJx said:
Do not go incipio the design comes off and it looks like ****
Sent from my HTC One using ViperOne
Click to expand...
Click to collapse
Well i was thinkinh the Incipio Dual Pro with Silicone...

Just tried a skin and bumper combo. Best compromise between protection and looks IMO. Nothing will top an otterbox for protection, but makes phone very bulky and it overheats too easily when using navigation.
http://forum.xda-developers.com/showthread.php?p=44946148
Sent from my HTC One using xda premium

http://www.amazon.de/URBAN-ARMOR-CO...377460215&sr=8-2&keywords=htc+one+hülle+urban
this one I got a few weeks back, and it is the best case I could imagine for the One! Protection all around, wrapping over the edgres where the screen is. All buttons covered solid, and these covers help to push the Power/Vol buttoms. I can only say, I am totally happy with this case! A bit pricey, but worth every penny. Gives the One a real trendy look, and is available in different colours- I got the black/black one

dreico33 said:
Well i was thinkinh the Incipio Dual Pro with Silicone...
Click to expand...
Click to collapse
I have that and the design on the back totally wears off. Do NOT NOT NOT go with those

SMJx said:
I have that and the design on the back totally wears off. Do NOT NOT NOT go with those
Click to expand...
Click to collapse
Men u got me scared now.. haha...
What you would suggest???
What about this one????
http://dx-box.com/new-htc-one-double-dip-hard-shell-case-back-cover-hc-c840.html
Or these ones???
http://tpu-cases.com/index.php?main...id=341&zenid=5f996086e5e55efe16801fe09f74e9fd
http://tpu-cases.com/index.php?main...id=338&zenid=5f996086e5e55efe16801fe09f74e9fd

dreico33 said:
Men u got me scared now.. haha...
What you would suggest???
What about this one????
http://dx-box.com/new-htc-one-double-dip-hard-shell-case-back-cover-hc-c840.html
Or these ones???
http://tpu-cases.com/index.php?main...id=341&zenid=5f996086e5e55efe16801fe09f74e9fd
http://tpu-cases.com/index.php?main...id=338&zenid=5f996086e5e55efe16801fe09f74e9fd
Click to expand...
Click to collapse
Those look much nicer, there is no design to wear off, check out UAG though.

dreico33 said:
Well i was thinkinh the Incipio Dual Pro with Silicone...
Click to expand...
Click to collapse
I had this case and I don't know if anyone else had this problem but whenever I took a picture with the flash there was a tinge around the picture from the silicone of the case.
Sent from my HTC One using XDA Premium 4 mobile app

Check this one : http://www.rockphone.cn/en/Html/Product/507.html
I really like it, slim, look good.
I have the orange and black.

I have tried these cases/covers
KLD Series ENLAND
http://www.youtube.com/watch?feature...&v=xggUZCcBcww
Diztronic
http://tpu-cases.com/index.php?main_...ex&cPath=48_86
Case Mate
http://www.case-mate.eu/smartphone/htc/htc-one.html
Rock
http://www.rockphone.cn/en/Plus/Sear...p?pID=12&bID=0
Spigen Ultra Thin Air
http://www.spigen.com/cell-phone/htc/htc-one.html
Poetic Atmosphere
http://www.yourpoetic.com/c/77/htc-one-m7
Meifeng Matte Hard Skin Cover Case
http://www.youtube.com/watch?v=A1G-Tc72ZvQ
You can get these in any size you want, Just send the measurements with the case/phone
Leather HTC One Wallet case
http://www.etsy.com/listing/12804165...e?ref=col_view
HTC ONE leather case - Italian leather
http://www.etsy.com/listing/15309752...r?ref=col_view
Simple black leather iPhone wallet case
http://www.etsy.com/listing/11499042...e?ref=col_view
Hip iphone wallet
http://www.etsy.com/listing/86702111...k?ref=col_view
Steampunk smart phone
http://www.etsy.com/listing/11228484...n?ref=col_view
Leather iPhone case
http://www.etsy.com/listing/15394704...4?ref=col_view
iPhone/iPod Case - Charcoal Wool Felt and Black Leather
http://www.etsy.com/listing/64894463...d?ref=col_view

Tudia Ultra Slim Melody Case

Has anyone got one? They look nice and get good reviews on Amazon but would be good if someone who has one could post some pics of the real thing. I have the Spigen ultra hybrid which looks great but adds a lot of bulk to the phone and doesn't feel so great. I also have a cheapo tpu case which actually feels great but the finish is a bit poor and its a little saggy.
http://www.amazon.co.uk/gp/aw/d/B00FOAK9CK
Thanks in advance:thumbup:

Link not working

lll_ari_lll said:
Link not working
Click to expand...
Click to collapse
Really works for me. Try this one http://www.amazon.co.uk/gp/product/B00FOAK9CK?ie=UTF8&force-full-site=1&ref_=aw_bottom_links

I don't have one, nor any experience with the maker, but they do look on the thicker side for TPU cases.

Now it's working... how so?
Yeah it seems like on the thicker side.

Got one of these today and really love it! Fantastic case.

"TPU" and "Ultra Slim" should never be uttered in the same sentence unless that sentence is "Nothing about TPU is ultra slim by any stretch of the imagination."
stahp.

Great case! Fits the phone perfectly without room for it to slide up and down inside the case. Buttons are not too hard to press but a little more difficult. All ports are accessible. The speaker grill cut out isn't perfectly put, but is just fine.

Still waiting for mine to be delivered, looks like it's coming from the UK from the US via snail mail.
Sent from my Nexus 5 using Tapatalk

lawsmal caught
Higgsy said:
Still waiting for mine to be delivered, looks like it's coming from the UK from the US via snail mail.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
how much is the shipping ?

£1.99
Got it the other day - nice case fist really well with no saggyness, I have ditched my spigen ultra hybrid for this as that whilst looking cool was too bulky.

This is a mediocre case at best. It's slim, but has the sticky feel of glossy TPU, which I hate. The design on the back may or may not appeal to you -- I found it repulsive. Overall, with this case, you get what you pay for. I personally think it ruins the aesthetics of the Nexus 5.

endigo85 said:
This is a mediocre case at best. It's slim, but has the sticky feel of glossy TPU, which I hate. The design on the back may or may not appeal to you -- I found it repulsive. Overall, with this case, you get what you pay for. I personally think it ruins the aesthetics of the Nexus 5.
Click to expand...
Click to collapse
If the back is so repulsive why on earth did you buy it in the first place? It was quite evident in the pictures and listings that it was glossy tpu and the back was the way it is. Surely one of the main reasons people buy this case is because they like the design on the back. The case is cheap but alot better quality than other tpu cases ( of which I have bought 2) of a similar price and ruins the aesthetics no more than any other case, compared to other cases I have bought including the spigen it follows the contours of the phone well.
Sent from my Nexus 5 using Tapatalk

Higgsy said:
If the back is so repulsive why on earth did you buy it in the first place? It was quite evident in the pictures and listings that it was glossy tpu and the back was the way it is. Surely one of the main reasons people buy this case is because they like the design on the back. The case is cheap but alot better quality than other tpu cases ( of which I have bought 2) of a similar price and ruins the aesthetics no more than any other case, compared to other cases I have bought including the spigen it follows the contours of the phone well.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Do you honestly think I would have bought it if I had known that I didn't like the back design? It looked great in the photo, but not when I had it in my hands.

Bamboo or Ebony

Just got my ebony skin from www.gadgetshieldz.in as seen here next to bamboo back cover
As you can see ebony looks and fits really well , and costs half as much as bamboo back cover , only down side is this isn't real wood unlike bamboo, but it does feel really good to hold :good:

So is this hard plastic?? or a 3M stick on

I personally like the darker look of the ebony much more than the lighter bamboo.

yuseff14 said:
So is this hard plastic?? or a 3M stick on
Click to expand...
Click to collapse
it's 3m skin on sandstone back

I don't see how these could possibly stick very well to the sandstone back and not peel up at the edges.
A bit disappointed that they think the styleswap cases for the ONE are made out of gold now, with the prices people are asking. And nowhere near the selection you get on the TWO.

lotherius said:
I don't see how these could possibly stick very well to the sandstone back and not peel up at the edges.
A bit disappointed that they think the styleswap cases for the ONE are made out of gold now, with the prices people are asking. And nowhere near the selection you get on the TWO.
Click to expand...
Click to collapse
it actually sticks pretty well i must say , i had to remove it several times before i got it right . Once its perfectly placed you need to use the standard procedure of using a hair dryer to head up edges to make them stick

s-hfarooq said:
I personally like the darker look of the ebony much more than the lighter bamboo.
Click to expand...
Click to collapse
Bamboo will get darker in time, if you don't use any case for opo. And yes, the bamboo get more sexy looks

i love bamboo back cover

Which cases for the bamboo cover well? The oneplus one cases are too small
This case is awesome. Got it for $20 off craigslist.

Looks good, do you have a DBrand skin to compare the quality?

nsyedhasan said:
Looks good, do you have a DBrand skin to compare the quality?
Click to expand...
Click to collapse
nope but its made from 3M vinyl so i guess its the same

Thin fit, minimalist case

Anyone using this kind of thin fit, minimalist case? Any recommendation? Thanks.

I'm holding out for the likes of Peel, MNML, Totalle.
Well, those types of cases, not paying the £20/30 they're asking when they'll pop up at some point for £4

Here what I found:
https://www.amazon.com/Luibor-Googl...d=1602878597&sprefix=luibor+pi,aps,226&sr=8-5
I am leaning to this:
https://www.amazon.de/-/en/dp/B08G8...cer+Google+Pixel+5&qid=1602940526&sr=8-9&th=1
I don't really like Peel or MNML. I have MNML for Pixel 2/2XL and it is very slippery. And after few months, it's loosen and stretched.
Totallee has it already, but quite expensive and I have no idea if it is good.
https://www.totalleecase.com/products/pixel-5-case

gogol said:
Here what I found:
https://www.amazon.com/Luibor-Googl...d=1602878597&sprefix=luibor+pi,aps,226&sr=8-5
I am leaning to this:
https://www.amazon.de/-/en/dp/B08G8...cer+Google+Pixel+5&qid=1602940526&sr=8-9&th=1
I don't really like Peel or MNML. I have MNML for Pixel 2/2XL and it is very slippery. And after few months, it's loosen and stretched.
Totallee has it already, but quite expensive and I have no idea if it is good.
https://www.totalleecase.com/products/pixel-5-case
Click to expand...
Click to collapse
I was debating the totallee, had it in my cart for so long...but too expensive for what it is. Plus they advertise 0.02" (which is about 0.5mm). MNML is 0.35mm advertised. So should be thinner.
I have the MNML for my Pixel 3 XL and love it, but it also stretched around the fingerprint (I think maybe due to device heat).
Anyways MNML has a 2 year warranty which covers this, but you have to buy from them. I just bought it for the Pixel 5, use code THEO30 Still expensive, but cheaper than Totallee, and probably slightly better quality control than the super thin ones on Amazon.

I have ordered a Totallee one, it's on pre-order, ships on 30th October (finger's crossed), I'll put up some pictures after it arrived!

sean222 said:
I was debating the totallee, had it in my cart for so long...but too expensive for what it is. Plus they advertise 0.02" (which is about 0.5mm). MNML is 0.35mm advertised. So should be thinner.
I have the MNML for my Pixel 3 XL and love it, but it also stretched around the fingerprint (I think maybe due to device heat).
Anyways MNML has a 2 year warranty which covers this, but you have to buy from them. I just bought it for the Pixel 5, use code THEO30 Still expensive, but cheaper than Totallee, and probably slightly better quality control than the super thin ones on Amazon.
Click to expand...
Click to collapse
That code brings it down to £22.37 for me in the UK.
Delivery 7-14 days.
Jeez.

superleeds27 said:
That code brings it down to £22.37 for me in the UK.
Delivery 7-14 days.
Jeez.
Click to expand...
Click to collapse
Yes...expensive still....
It says it ships Oct 24 and will deliver to me in Canada in 5 business days. Pixel 5 is still on pre-order until Oct. 30 so I'll get the case before my Pixel 5 comes

sean222 said:
I was debating the totallee, had it in my cart for so long...but too expensive for what it is. Plus they advertise 0.02" (which is about 0.5mm). MNML is 0.35mm advertised. So should be thinner.
I have the MNML for my Pixel 3 XL and love it, but it also stretched around the fingerprint (I think maybe due to device heat).
Anyways MNML has a 2 year warranty which covers this, but you have to buy from them. I just bought it for the Pixel 5, use code THEO30 Still expensive, but cheaper than Totallee, and probably slightly better quality control than the super thin ones on Amazon.
Click to expand...
Click to collapse
I had the MNML for my P2XL. It's a super thin but hard plastic right?
Is the (clear) totallee more of a super thin flexible TPU?

Ragingsheep said:
I had the MNML for my P2XL. It's a super thin but hard plastic right?
Is the (clear) totallee more of a super thin flexible TPU?
Click to expand...
Click to collapse
Yep, MNML is super thin but hard plastic. Never used Totallee...the clear looks flexible, and the rest look like MNML (rigid plastic).

Anyone used Spigen thin fit? Not as thin as MNML or any of those but looks quite slim with some protection.
https://www.spigen.com/collections/pixel-5/products/pixel-5-case-thin-fit?variant=32618318921775

sw25 said:
Anyone used Spigen thin fit? Not as thin as MNML or any of those but looks quite slim with some protection.
https://www.spigen.com/collections/pixel-5/products/pixel-5-case-thin-fit?variant=32618318921775
Click to expand...
Click to collapse
There's a review on Amazon where the author describes it as "surprisingly thick". Looking at the pictures it appears at least as thick as the depth of the camera module.

Somebody suggested in another thread:
Latercase
https://latercase.com/products/pixel-5-thin-case

lacibaci said:
Somebody suggested in another thread:
Latercase
https://latercase.com/products/pixel-5-thin-case
Click to expand...
Click to collapse
That looks really nice. I'm trying to find a minimal case like that, but with the texture of the oneplus sandstone case. Love that texture and it never showed any fingerprints.

sw25 said:
Anyone used Spigen thin fit? Not as thin as MNML or any of those but looks quite slim with some protection.
https://www.spigen.com/collections/pixel-5/products/pixel-5-case-thin-fit?variant=32618318921775
Click to expand...
Click to collapse
This Spigen has better grip than MNML.

I was fan of
- Ringke Slim
- Spigen Thin Fit
Which I used in my Pixel 2 and 4 respectively.
However the Ringke one is not available for Pixel 5.
The Spigen one is different, now it has the buttons covered with fake ones.
So I ended up going with:
"anccer Compatible for Google Pixel 5 Case, [Anti-Drop] Slim Thin Matte Hard Case, Full Protective Cover For Google Pixel 5"
Which seems to be similar case. If it has a similar mate soft grip I'll keep it.
A green version will arrive today. However I want black. Not in stock. I'll get black later if I like the green version.
I'm not sure if black and green have the same soft finish which I like because of the grip
Sent from my Pixel 5 using Tapatalk

Spigen Thin Fit is not thin at all.
Very disappointed...

thesebastian said:
So I ended up going with:
"anccer Compatible for Google Pixel 5 Case, [Anti-Drop] Slim Thin Matte Hard Case, Full Protective Cover For Google Pixel 5"
Which seems to be similar case. If it has a similar mate soft grip I'll keep it.
A green version will arrive today. However I want black. Not in stock. I'll get black later if I like the green version.
I'm not sure if black and green have the same soft finish which I like because of the grip
Sent from my Pixel 5 using Tapatalk
Click to expand...
Click to collapse
https://www.amazon.ca/Anccer-Colorf...&keywords=pixel+5+case&qid=1603286683&sr=8-13
The case looks good. Reviews of their other cases people say its slippery though.

sw25 said:
https://www.amazon.ca/Anccer-Colorf...&keywords=pixel+5+case&qid=1603286683&sr=8-13
The case looks good. Reviews of their other cases people say its slippery though.
Click to expand...
Click to collapse
I've received this one in Green (only one in stock)
And the only complain is that is not as grippy as the Spigen Thin Fit or Ringke Slim.
Maybe the black version is more grippy? Or maybe the finish needs to get wasted a bit
Sent from my Pixel 5 using Tapatalk

thesebastian said:
I've received this one in Green (only one in stock)
And the only complain is that is not as grippy as the Spigen Thin Fit or Ringke Slim.
Maybe the black version is more grippy?
Sent from my Pixel 5 using Tapatalk
Click to expand...
Click to collapse
Thanks for letting us know. Is it like rubbery feel or just smooth?

sw25 said:
Thanks for letting us know. Is it like rubbery feel or just smooth?
Click to expand...
Click to collapse
Both. But more smooth than rubbery.
Is smooth as if it had some talcum powder around but maybe because is new.
My 1 year old Spigen Thin Fit in black is a bit more grippy than this brand new Green case.
Sent from my Pixel 5 using Tapatalk

Accessories Bought Skin for my OnePlus 9 Pro

Got this one from https://www.gadgetshieldz.com/
I opted for the full-back one along with camera and logo skins as well.
The final price came around Rs. 537 ($7) after some automatic coupon they applied.
The packaging is nice too, came with like 4 sets of logo cutouts and in total 3 pairs of camera cutout skins along with a decent microfiber cloth.
In my personal opinion the quality and the overall things they supplied make up the price but for some, it can feel a tad bit expensive.

oddlyspaced said:
Got this one from https://www.gadgetshieldz.com/
I opted for the full-back one along with camera and logo skins as well.
The final price came around Rs. 537 ($7) after some automatic coupon they applied.
The packaging is nice too, came with like 4 sets of logo cutouts and in total 3 pairs of camera cutout skins along with a decent microfiber cloth.
In my personal opinion the quality and the overall things they supplied make up the price but for some, it can feel a tad bit expensive.
Click to expand...
Click to collapse
Even I bought my mobile's skin from Gadgetshieldz, and I don't find it expensive for the product is worth the price!!

Like in all seriousness what kind of drop protection do skins like these offer, decent? I really like what you did but drop my phone from time to time.

bdaviesweb said:
Like in all seriousness what kind of drop protection do skins like these offer, decent? I really like what you did but drop my phone from time to time.
Click to expand...
Click to collapse
No drop protection whatsoever but, if the back glass shatters, the skin will stop the shards going all over

djsubterrain said:
No drop protection whatsoever but, if the back glass shatters, the skin will stop the shards going all over
Click to expand...
Click to collapse
Hahaha great thank you.

bdaviesweb said:
Like in all seriousness what kind of drop protection do skins like these offer, decent? I really like what you did but drop my phone from time to time.
Click to expand...
Click to collapse
I typically put a skin on my skin and then put a transparent back case on top of it. So that way best of both worlds.
Haven't bought any case for my 9 pro yet because I am waiting for the product reviews to populate, but yea skin and a transparent case is my goto.

salimifran said:
Even I bought my mobile's skin from Gadgetshieldz, and I don't find it expensive for the product is worth the price!!
Click to expand...
Click to collapse
Care to show?

oddlyspaced said:
Got this one from https://www.gadgetshieldz.com/
I opted for the full-back one along with camera and logo skins as well.
The final price came around Rs. 537 ($7) after some automatic coupon they applied.
The packaging is nice too, came with like 4 sets of logo cutouts and in total 3 pairs of camera cutout skins along with a decent microfiber cloth.
In my personal opinion the quality and the overall things they supplied make up the price but for some, it can feel a tad bit expensive.
Click to expand...
Click to collapse
White marble looks cool!!! Recently bought a skin from Gadgetshieldz for OnePlus 9 pro I own. Bought hive flatback skin and sandstone orange for the camera array. Gotta say they're of good quality. Here's few pictures!!

ivigneshwaran said:
White marble looks cool!!! Recently bought a skin from Gadgetshieldz for OnePlus 9 pro I own. Bought hive flatback skin and sandstone orange for the camera array. Gotta say they're of good quality. Here's few pictures!!View attachment 5288847View attachment 5288849View attachment 5288851
Click to expand...
Click to collapse
Looking real snazzy I must say!

Also, liking that classy Marble looks! cool

This is my OnePlus 9 Pro with a dbrand Skin. Love how it looks

oddlyspaced said:
Care to show?
Click to expand...
Click to collapse
OnePlus 9 Pro unboxing!
I received my OnePlus 9 Pro and am quite excited to share the pictures! It looks so cool and astonishing!
forum.xda-developers.com
Have already posted in a different thread!! It is Ebony wood skin from Gadgetshieldz.

I just run spigen slim armor cases on all my phones. They work great

Managed to get the dbrand (RED) Damascus skin while it was offered, got the Grip + skin too, the reduction in signal is nowhere near as bad as it was for Pixel/iPhone.

djsubterrain said:
Managed to get the dbrand (RED) Damascus skin while it was offered, got the Grip + skin too, the reduction in signal is nowhere near as bad as it was for Pixel/iPhone.
Click to expand...
Click to collapse
I heard the first gen metallic skins from dbrand used a metallic filler that interfered with the radios, I have the second gen dbrand warzone and reception appears to be the exact same.

Slowcar808 said:
I heard the first gen metallic skins from dbrand used a metallic filler that interfered with the radios, I have the second gen dbrand warzone and reception appears to be the exact same.
Click to expand...
Click to collapse
That was primarily with iPhones and Pixel phones and only affected the wraparound skins, back only skins did not interfere