Develop Bugs

[Help!] Bricked Kindle Fire/ Won't even start

After I rooted my kindle and installed adw.launcher everything was going fine. I rebooted my kindle and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working. Even when I plug it in the orange charge light doesn't even come on. I need help badly and I would prefer not to have to send it in to get a replacement. The entire reason I created this xda account was to fix this. Please I need help.

That doesn't sound good. Press and hold the on button for like 20 seconds and see if anything happens.

jaredkzr said:
After I rooted my kindle and installed adw.launcher everything was going fine. I rebooted my kindle and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working. Even when I plug it in the orange charge light doesn't even come on. I need help badly and I would prefer not to have to send it in to get a replacement. The entire reason I created this xda account was to fix this. Please I need help.
Click to expand...
Click to collapse
Try the Hard reset option as explained by GBH2 and if it doesn't help, then please list down what exactly did you do to root your device, stock FW version etc.
Sent from my GT-I9100 using XDA App

I have already tried the hard reset but to no avail. I have no idea what happened to it. I think I will just have to get a replacement. I followed instructions off of mobilemag and of course I can't place the link in this post.

I literally just had same issue... holing power button for 20+ seconds did the trick here.
Running CM7 w/ MAC address fix.

mine's bricked too
I also have a bricked Kindle and not sure what to do about it.
I had my KF rooted and working. Then, I followed these instructions to get a better keyboard. In short, I edited one row of the secure table in settings.db, trying to enable Hackers Keyboard. I followed the instructions very carefully, including changing permissions. When I rebooted, it stuck at the kindle fire logo, and it is still stuck there.
I can connect via adb, but can no longer burrito root. Can't run 'su'. I'm searching these forums trying to figure what to do next.

do you have twrp available ?
if not you could follow this post: http://forum.xda-developers.com/showthread.php?t=1414832

fixed
Thanks. I found that thread via http://forum.xda-developers.com/showthread.php?t=1356257&page=61 and it saved the day.
I was able to fastboot, twrp, and eventually solve my problem.
I had updated settings.db, then used `adb push` to put it in the right place. Then, I chmod-ed it as the instructions warned. However, it was owned by root not system! With twrd, I was able to get back into adb. Chown-ing and chgrp-ing that file to system solved my problem.
(Unfortunately some of the other stuff I did along the way broke a few apps... anyway I'm happy to have a working KF again.)

good to hear !!!

Did you ever get your KF to work? I can not get mine to turn on after KFU 0.9.5 used to do perm root. Now nothing works at all

Kindle fire wont power on /boot
I'm facing the same issue here, i have FFF 1.4a and TWRP 2.2.2.1 installed and JB 4.2.1 from twv. However i noticed whenever i pressed reboot from menu or power it off, i cannot turn it on again.
Luckily i have an OTG cable which help me force boot it, but i want to solve the issue coz i dont want to use the OTG cable always to turn it on.
Note: Holding power button for 20secs did not solve the issue

hi vertcam9 how do you force boot it please.
omniac

omniac said:
hi vertcam9 how do you force boot it please.
omniac
Click to expand...
Click to collapse
Hello, i have a Factory Cable (USB cable) with a different pin configuration. Basically if you have a working bootloader, you just plug it in (with a PC) and it will go to the FFF screen.
I think my issue is a busted USB port already.

ok thanks tried that, but it is deader than that.
omniac

Dead is right on the mark for mine also. With pc never detecting my CM9 , I updated my TWRP to v2.2.2.1, in hopes to go to CM10
And for first time saw *bootloader* as an option in TWRP . Screeching halt!!! Beware.

Seriously people...
vertcam9 said:
I'm facing the same issue here, i have FFF 1.4a and TWRP 2.2.2.1 installed and JB 4.2.1 from twv. However i noticed whenever i pressed reboot from menu or power it off, i cannot turn it on again.
Luckily i have an OTG cable which help me force boot it, but i want to solve the issue coz i dont want to use the OTG cable always to turn it on.
Note: Holding power button for 20secs did not solve the issue
Click to expand...
Click to collapse
vertcam9 said:
Hello, i have a Factory Cable (USB cable) with a different pin configuration. Basically if you have a working bootloader, you just plug it in (with a PC) and it will go to the FFF screen.
Click to expand...
Click to collapse
Normally I would assume you had a 2nd generation device and tried to modify it, but I see your first post was made back in April and then edited two days ago?!? Is this a new problem or the same problem you had eight months ago?
I'm pretty sure your USB port isn't bad and you just have a broken bootloader. If you have a 1st generation device, the Firekit w/shorting trick to put the device in USBboot will do the trick.
omniac said:
hi vertcam9 how do you force boot it please.
omniac
Click to expand...
Click to collapse
omniac said:
ok thanks tried that, but it is deader than that.
omniac
Click to expand...
Click to collapse
How about some details...better yet, start a new thread...In the Q&A section.
Smmoph said:
Dead is right on the mark for mine also. With pc never detecting my CM9 , I updated my TWRP to v2.2.2.1, in hopes to go to CM10
And for first time saw *bootloader* as an option in TWRP . Screeching halt!!! Beware.
Click to expand...
Click to collapse
This sounds like a completely different problem. You should probably start a new thread as well...In the Q&A section.

I have the exact same problem!!!!!!!!!
After I rooted my kindle, everything was going fine. My kindle turned off and when I rebooted, it got stuck in a bootloop. I tried to fix it by reflashing a fresh image and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working.
This has been the problem since 5 months...
I am using a kindle fire 5th generation and don't have a factory cable.
Can somebody plz help!!!!!!!!!!!!
If so, can someone post a link for a cheap factory cable however I really don't want to use/buy one.
Thanks!

samiultahir said:
I have the exact same problem!!!!!!!!!
After I rooted my kindle, everything was going fine. My kindle turned off and when I rebooted, it got stuck in a bootloop. I tried to fix it by reflashing a fresh image and out of nowhere it refuses to start. Absolutely nothing shows up at all. The screen doesn't come on, the logo, nothing. The battery was at 75% when it was working.
This has been the problem since 5 months...
I am using a kindle fire 5th generation and don't have a factory cable.
Can somebody plz help!!!!!!!!!!!!
If so, can someone post a link for a cheap factory cable however I really don't want to use/buy one.
Thanks!
Click to expand...
Click to collapse
this is only for Kindle Fire 1 (2011)
there is a separate section for your device see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum link
Sent from my XT1028 using XDA Labs

sd_shadow said:
this is only for Kindle Fire 1 (2011)
there is a separate section for your device see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum link
Sent from my XT1028 using XDA Labs
Click to expand...
Click to collapse
Oh Thanks Anyways but do you know a fix for this?
BTW I think my device is hard bricked. :crying:

samiultahir said:
Oh Thanks Anyways but do you know a fix for this?
BTW I think my device is hard bricked. :crying:
Click to expand...
Click to collapse
post in the correct forum
Sent from my sailfish using XDA Labs

[Q] Kindle with no OS

I have a kindle fire with no OS, it has TWRP recovery and I was trying to wipe android 4.0 from it and re install 6.2.2 but I accidentally deleted the OS and any hope of re installing it. I cannot communicate with the device whatsoever using kindle utility or Kindle fire unbricker. I played with the drivers for awhile in device manager to no avail. it currently sits in 'Disk Drives' as Amazon Kindle USB device but I cannot put anything on it because it it's showing up as a proper driver or w/e. when I turn it on I get what I believe is the firefirefire triangle and if I choose to I can access TWRP, but when I left it fully boot I get a black lighting. Any help is extremely appreciate. I did look around for a bit before posting my question and found nothing that fit my problem but if there is such a thread I'm sorry I posted an unnecessary one.

have you tried mounting your kindle in twrp if you can then just flash a new ROM and you should be good to go
Sent from my CM9 LG G2X using Tapatalk

I thought I already tried that but I went back and fiddle with a few settings and got access to my kindle, I went looking for the kindle 6.2.2 stock rom and couldn't find a download, I need to find a stock download because brother plans on selling this kindle, I'm only helping because I was the one who rooted and put android 4.0 on there.
TLR; Where can I get kindle fire stock rom at?

One does not simply delete an entire OS.... ;~;

http://forum.xda-developers.com/showthread.php?t=1399072

Bacondroid said:
One does not simply delete an entire OS.... ;~;
Click to expand...
Click to collapse
Lol one does simply delete an entire is. I made this same mistake and had to push a is to my kindle while in fastboot mode through adb. Took awhile for me to think of it but it finnally worked and I fixed it.
Sent from my Kindle Fire using Tapatalk

OK, My command prompt can't find my kindle fire as listed devices. I really need help! Plus, there is no exclamation point (!) all it lists is the Android ADB thing. How do I get it to find the device

threed42 said:
OK, My command prompt can't find my kindle fire as listed devices. I really need help! Plus, there is no exclamation point (!) all it lists is the Android ADB thing. How do I get it to find the device
Click to expand...
Click to collapse
This has literally nothing to do with the topic you posted in. Take a step back and do a little research before posting. You'll much likely be better off if you know what's going on.
I suggest you start here:
http://forum.xda-developers.com/showpost.php?p=25884555

soupmagnet said:
This has literally nothing to do with the topic you posted in. Take a step back and do a little research before posting. You'll much likely be better off if you know what's going on.
I suggest you start here:
http://forum.xda-developers.com/showpost.php?p=25884555
Click to expand...
Click to collapse
I mean, I got there, but there is no OS installed on my kindle fire

Okay, I realize I tend to come off a little "jerky" sometimes, but I really am trying to help. When you hijack a thread that's several months old and post a problem that seemingly has nothing to do with the OP, only to later reveal that there is much more to your problem (even after being suggested to do it differently), it makes other people that would normally be willing to help, think twice about getting involved. Nobody wants to have to ask 50 different questions to get to the root of the problem. You need to realize that the people who would help, probably don't want to do more work than absolutely necessary. And you should be respectful of that if you want some quality assistance from the people who might be able to solve your problem.
So once again, and respectfully, I suggest you click on the link I gave you, read it, do any suggested research and follow the directions given in the post.

Hey I'm having the same problem. I tried to root my kinble fire and accidentilly wiped the stockos off it but I have TWRP on the device, however I am not able to mount the device using twrp to put a ROM on the device to boot to. Any help getting the device to be recognized by the computer and mounting it would be a great help and any other info about installing a ROM to my kindle would also be a big help.

jgrun8732 said:
Hey I'm having the same problem. I tried to root my kinble fire and accidentilly wiped the stockos off it but I have TWRP on the device, however I am not able to mount the device using twrp to put a ROM on the device to boot to. Any help getting the device to be recognized by the computer and mounting it would be a great help and any other info about installing a ROM to my kindle would also be a big help.
Click to expand...
Click to collapse
[Edit:] Have you looked into SoupKit?

soupmagnet said:
[Edit:] Have you looked into SoupKit?
Click to expand...
Click to collapse
I actually figured everything out about 2 hours after my post. In order to get the Kindle recognized by my pc I had to change it over to USB composite device then I was able to load a ROM on it and I am now enjoying jelly bean 4.1 on the kindle now. I have not been able to restore the kindle os but I am assuming that if I look long enough for the kernal and firmware I will be able to restore it. Not that I have any plans to seeing as I have a dedicated android tablet now that does everything I want it and need to do anyways, I read on the kindle for like 3 months when it first came out, not worried about reading on it any more besides there's an app for it. Anyways thanks for the reply.

Hi, sorry if it is bad manners to post in threats months old but I am also having a similar problem with my kindle fire.
Today I spent hours rooting it and trying to get the google play store to work on it - all in a dangerously haphazard manner. It was really reckless of me.
Somewhere in the process I used KFU 0.9.9 after restoring to stock and re-rooting, then after a reboot the OS would't show up. it seemed like it loaded and everything but I couldn't see anything after it loaded past TWRP. I wiped system, and now am without an OS and only TWRP to use.
Some details:
Mounting works
Flashing stock is NOT WORKING. This is my main problem. I don't know any other method of restoring an OS; I do not know how sideloading with ADB works, or if that would help at all.
Much apologies in advanced for my juvenile-ty

thanks
DJLamontagneIII said:
have you tried mounting your kindle in twrp if you can then just flash a new ROM and you should be good to go
Sent from my CM9 LG G2X using Tapatalk
Click to expand...
Click to collapse
I count believe I was forgetting to mount Thanks

I know this thread is old and i apologize if this is the wrong place for me to post.
I'm in a similar situation, no os can access twrp and mount but my computer wants me to format. What can I do at this point?
thanks

iamchaos said:
I know this thread is old and i apologize if this is the wrong place for me to post.
I'm in a similar situation, no os can access twrp and mount but my computer wants me to format. What can I do at this point?
thanks
Click to expand...
Click to collapse
figured it out formatted and was able to load rom and flash.
Thanks

No idea What I need to do
I have a kindle fire with no OS, it has TWRP recovery and I was trying to wipe android 4.0 from it and re install 6.2.2 but I accidentally deleted the OS and any hope of re installing it. I cannot communicate with the device whatsoever using kindle utility or Kindle fire unbricker. I played with the drivers for awhile in device manager to no avail. it currently sits in 'Disk Drives' as Amazon Kindle USB device but I cannot put anything on it because it it's showing up as a proper driver or w/e. when I turn it on I get what I believe is the firefirefire triangle and if I choose to I can access TWRP, but when I left it fully boot I get a black lighting. Any help is extremely appreciate. I did look around for a bit before posting my question and found nothing that fit my problem but if there is such a thread I'm sorry I posted an unnecessary one.

Csnoopy35 said:
I have a kindle fire with no OS, it has TWRP recovery and I was trying to wipe android 4.0 from it and re install 6.2.2 but I accidentally deleted the OS and any hope of re installing it. I cannot communicate with the device whatsoever using kindle utility or Kindle fire unbricker. I played with the drivers for awhile in device manager to no avail. it currently sits in 'Disk Drives' as Amazon Kindle USB device but I cannot put anything on it because it it's showing up as a proper driver or w/e. when I turn it on I get what I believe is the firefirefire triangle and if I choose to I can access TWRP, but when I left it fully boot I get a black lighting. Any help is extremely appreciate. I did look around for a bit before posting my question and found nothing that fit my problem but if there is such a thread I'm sorry I posted an unnecessary one.
Click to expand...
Click to collapse
it's not broken, you have twrp,
don't use kfu or unbricker
what version of twrp?
Sent from my KFFOWI using XDA Labs

I have the newest version I think?
sd_shadow said:
it's not broken, you have twrp,
don't use kfu or unbricker
what version of twrp?
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse

[Q] Kind Fire Bricked at Yellow Triangle....What Now???

So Ive read multiple threads from this forum and tried the suggested methods and nothing has worked at all. My Kindle Fire is stuck at the Yelllow triangle logo and I have no clue how to get it back working at this point. I originally rooted using BreakDroid using Clockwork recovery and was successful running the Energy ICS Rom.
I attempted to flash the Miui ICS Rom and thats where it went all bad and has been stuck at the Yellow Triangle ever since. I've tried to use the KFU 0.9.6 but my computer only recognizes the kindle as a "android phone" but doesn't see that's it plugged in. KFU states that it's waiting for device when trying to run any of the commands and I have reboot to get it to proceed but none of the commands work and only return me back to a frozen triangle screen everytime.
So I need some serious advise on how to start over and get my kindle fire back to stock and out of this dreadful yellow triangle screen thats haunting me! Please post any instructions based on your experiences or expertise.
Please Please Please Help!
Thanks in advance.....

Are you able to access recovery?

soupmagnet said:
Are you able to access recovery?
Click to expand...
Click to collapse
Nope not at all everytime I press the button and it turns orange nothing happens and it completely freezes and I have to reboot completely.

How comfortable are you with fastboot commands?

soupmagnet said:
How comfortable are you with fastboot commands?
Click to expand...
Click to collapse
Not the best but if you have some instructions I'm sure I can figure it out lol at this point I have no choice

You have two different problems.
1. Stuck in fastboot mode
2. Bad drivers
Read this guide: (post #s 1, 2, and 3)
http://forum.xda-developers.com/showpost.php?p=23747567
...that will get you started.

soupmagnet said:
You have two different problems.
1. Stuck in fastboot mode
2. Bad drivers
Read this guide: (post #s 1, 2, and 3)
http://forum.xda-developers.com/showpost.php?p=23747567
...that will get you started.
Click to expand...
Click to collapse
I used the Kindle Fire Utility and did option #1 to boot normal mode but it didn't work but I'll these methods and post some feedback on it....thanks a lot

soupmagnet said:
You have two different problems.
1. Stuck in fastboot mode
2. Bad drivers
Read this guide: (post #s 1, 2, and 3)
http://forum.xda-developers.com/showpost.php?p=23747567
...that will get you started.
Click to expand...
Click to collapse
I understand all of that info but doesn't really lay out any steps to take to fix the issues I'm having. I'm not a newbie to rooting this is just the first time I've experienced this particular problem

Disregard

Thepooch said:
Disregard
Click to expand...
Click to collapse
Thanks for the positive advice

I wrote some but later recinded it because I didnt feel it fully applied. but as I see you did a bad flash with clockwork mod when the newer roms need to be flashed with twrp from all I have read. Your situation screams drivers as well as soup says. If you can access recovery what about your backup? lemme guess didnt make one? You can use kfu to change your boot mode but first you need adb working my suggestion plug your kindle in run the drivers see if it doesnt show up in kfu.But that doesnt fix what corrupted your system that caused your bootloop in the first place. Really all you can do is get adb going to push some files to your sd card to work with unless perhaps with some magic you regain access to usb mass storage. All this teeters on your ability to get into recovery as well.

Thepooch said:
I wrote some but later recinded it because I didnt feel it fully applied. but as I see you did a bad flash with clockwork mod when the newer roms need to be flashed with twrp from all I have read. Your situation screams drivers as well as soup says. If you can access recovery what about your backup? lemme guess didnt make one? You can use kfu to change your boot mode but first you need adb working my suggestion plug your kindle in run the drivers see if it doesnt show up in kfu.But that doesnt fix what corrupted your system that caused your bootloop in the first place. Really all you can do is get adb going to push some files to your sd card to work with unless perhaps with some magic you regain access to usb mass storage. All this teeters on your ability to get into recovery as well.
Click to expand...
Click to collapse
I actually got it fixed using breakdroid and thank god it worked but thanks for the advice I know exactly what not to do the next time

Had a similar problem brickoid sorted me
Sent from my i777 using xda
aokp on neak yo!

Stuck in the orange boot loop and can't access ADB, TWRP or USB etc.

Now I'm in an even worse position to further prove my dopeyness. :crying: I installed CM10 and GAPPs in the root of my KF2. Went to do the wipes as instructed and then I couldn't get those files or access my KF2 via ADB or USB and I was stuck in TWRP with no OS. I couldn't do a sideload ADB through TWRP or Terminal Emulator since they couldn't find the device. FYI I successfully installed the drivers by restarting my Win8 computer and going through without signing drivers, but the device still wouldn't show up anywhere.
After that nightmare, I shut my KF2 down to do some work and then when I started it back up again, I was stuck in the dreaded orange Kindle Fire bootloop and I can't get into TWRP, ADB or anything else.
Any thoughts?

Re: I cannot get Boot Status 4000 in KFU and I can't install TWRP & I've tried EVERYT
KFU?
Do you have a Kindle Fire 2 (this is the kf2 forum)? KFU only works on the KF1.
Time to start reading. Too many people doing things like this lately..
Don't use ANYTHING made for the KF1 on the KF2!
--
Sent from my Kindle Fire 2, CM 10.1

mindmajick said:
KFU?
Do you have a Kindle Fire 2 (this is the kf2 forum)? KFU only works on the KF1.
Time to start reading. Too many people doing things like this lately..
Don't use ANYTHING made for the KF1 on the KF2!
--
Sent from my Kindle Fire 2, CM 10.1
Click to expand...
Click to collapse
Thanks!! I didn't realize. I also could swear that a KF2 thread lead me to KFU. Either way, what's the best method to get TWRP on my KF2. I love Jelly Beans. BTW I was able to install GAPPs with KFU without a problem. I just can't get a recovery on it.

I'm a dope. I installed the TweezerMod.apk and I have TWRP.
Thanks again for showing me the light. :good:

Re: I cannot get Boot Status 4000 in KFU and I can't install TWRP & I've tried EVERYT
jjdavola said:
I'm a dope. I installed the TweezerMod.apk and I have TWRP.
Thanks again for showing me the light. :good:
Click to expand...
Click to collapse
Lol. Glad to help. I was going to point you there next.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Now I'm in an even worse position to further prove my dopeyness. :crying: I installed CM10 and GAPPs in the root of my KF2. Went to do the wipes as instructed and then I couldn't get those files or access my KF2 via ADB or USB and I was stuck in TWRP with no OS. I couldn't do a sideload ADB through TWRP or Terminal Emulator since they couldn't find the device. FYI I successfully installed the drivers by restarting my Win8 computer and going through without signing drivers, but the device still wouldn't show up anywhere.
After that nightmare, I shut my KF2 down to do some work and then when I started it back up again, I was stuck in the dreaded orange Kindle Fire bootloop and I can't get into TWRP, ADB or anything else.
Any thoughts?
I change the OP accordingly.

Re: I cannot get Boot Status 4000 in KFU and I can't install TWRP & I've tried EVERYT
jjdavola said:
Now I'm in an even worse position to further prove my dopeyness. :crying: I installed CM10 and GAPPs in the root of my KF2. Went to do the wipes as instructed and then I couldn't get those files or access my KF2 via ADB or USB and I was stuck in TWRP with no OS. I couldn't do a sideload ADB through TWRP or Terminal Emulator since they couldn't find the device. FYI I successfully installed the drivers by restarting my Win8 computer and going through without signing drivers, but the device still wouldn't show up anywhere.
After that nightmare, I shut my KF2 down to do some work and then when I started it back up again, I was stuck in the dreaded orange Kindle Fire bootloop and I can't get into TWRP, ADB or anything else.
Any thoughts?
I change the OP accordingly.
Click to expand...
Click to collapse
Yes. If you don't have a fastboot cable.. Get one. You'll need it to restore back to stock.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

mindmajick said:
Yes. If you don't have a fastboot cable.. Get one. You'll need it to restore back to stock.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I actually have two of the OEM cables. What do I need to do with them?
Thanks again!

jjdavola said:
I actually have two of the OEM cables. What do I need to do with them?
Thanks again!
Click to expand...
Click to collapse
Its a fast boot cable? Dude- you need to read like EVERYTHING in the dev section here. There is a thread on recovery.
http://forum.xda-developers.com/showthread.php?t=2035047
And here is a tool that can help:
http://forum.xda-developers.com/showthread.php?t=2096888
And PLEASE.. once you have recovered your device READ everything in the kf2 and kfhd forums. Use the xda app if that's easier, but read it all. I promise it'll help.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

mindmajick said:
Its a fast boot cable? Dude- you need to read like EVERYTHING in the dev section here. There is a thread on recovery.
http://forum.xda-developers.com/showthread.php?t=2035047
And here is a tool that can help:
http://forum.xda-developers.com/showthread.php?t=2096888
And PLEASE.. once you have recovered your device READ everything in the kf2 and kfhd forums. Use the xda app if that's easier, but read it all. I promise it'll help.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
The original cables that came with the KF2 are not the same as fastboot cables? I thought I read that.

jjdavola said:
The original cables that came with the KF2 are not the same as fastboot cables? I thought I read that.
Click to expand...
Click to collapse
No. They are not.
Here is a legitimate source with fast shipping:
http://mobility.forumsee.com/a/m/s/p12-9168-063526--the-best-kindle-fire-factory-cable-period.html
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

mindmajick said:
No. They are not.
Here is a legitimate source with fast shipping:
http://mobility.forumsee.com/a/m/s/p12-9168-063526--the-best-kindle-fire-factory-cable-period.html
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. I guess I'll order one.
Before I do that, is there anything else that can be done without getting the cable? Believe me, I searched and read everything I could find on the problem, but since I can't get into ADB or TWRP due to the lovely bootloop (and no OS), my options look very limited.
The super sad part is my KF2 was working great for around 1/2 hour, but I got greedy and wanted JB.
BTW if it might be my only hope, is there an easy way to disable Android SDK as pointed out in the First Aide thread since uninstalling seems like a pain?
Thanks again!

jjdavola said:
Thanks. I guess I'll order one.
Before I do that, is there anything else that can be done without getting the cable? Believe me, I searched and read everything I could find on the problem, but since I can't get into ADB or TWRP due to the lovely bootloop (and no OS), my options look very limited.
The super sad part is my KF2 was working great for around 1/2 hour, but I got greedy and wanted JB.
BTW if it might be my only hope, is there an easy way to disable Android SDK as pointed out in the First Aide thread since uninstalling seems like a pain?
Thanks again!
Click to expand...
Click to collapse
Your only choice left is to get the fastboot cable. No Adb, recovery OR ROM....
Not sure why you need to disable the SDK or what to do, since I've never used it on windows. I just use the files I need (adb and fastboot) and installed the drivers specific to this device. I've only used the SDK on Linux
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

mindmajick said:
Your only choice left is to get the fastboot cable. No Adb, recovery OR ROM....
Not sure why you need to disable the SDK or what to do, since I've never used it on windows. I just use the files I need (adb and fastboot) and installed the drivers specific to this device. I've only used the SDK on Linux
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. I figured, but I could dream. To quote the First Aide link you provided:
To keep your Kindle safe, we have integrated this feature into our software, You do not need any command line knowledge, just as simple as 1, 2, and 3.
Prerequisites for the Recover Options:
1. Install The Latest Version Of Java SE: Java SE Development Kit 7u13
2. Android SDK Must Be Disabled Or Removed
Click to expand...
Click to collapse
So are you saying I don't need to do that?
Thanks again for your help and patience. I really appreciate it.

jjdavola said:
Thanks. I figured, but I could dream. To quote the First Aide link you provided:
So are you saying I don't need to do that?
Thanks again for your help and patience. I really appreciate it.
Click to expand...
Click to collapse
I don't know. Ask in the thread. The OP likes to help and communicates way more clearly than me. I'm sure he can tell you how to disable or remove it.
--
Sent from my Kindle Fire 2, CM 10.1

Kindle Fire 2 Red Screen (Bricked?)

I rooted my Kindle Fire 2 about a week ago and I was really enjoying it. Today I decided that I wanted to get cyanogen mod on my kindle. I went to a a forum page here on XDA which had a one click thing for TWRP. I downloaded it onto my kindle and started to install it. I allowed it with superuser, but then my screen went black and turned red. Now I'm kind of nervous because I've read that now I need to use a Factory/Fastboot cable to restore it. Is there any other way for me to restore my kindle? I can turn it off by holding the power button for 20 secs, but when I turn it back on the logo flashes for 2 secs and the red screen comes back.. Please help.. I'm kinda upset right now

No. You need a cable. Sorry you are upset but this is clearly stated in the CyanogenMod thread.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

mindmajick said:
No. You need a cable. Sorry you are upset but this is clearly stated in the CyanogenMod thread.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Ok, so if I purchase the cable, will that allow me to enter fastboot and fix the problem? Is fastboot somthing that is already on the device.. or is it something that I should of installed on it beforehand? Someone told me that all I need is the Factory Cable and I can work from there. Is that true?

You might want to start reading before you permanently brick your device
Start here:
http://forum.xda-developers.com/showthread.php?t=2228539
The "someone" is correct... But save yourself somw hassle and read everything you can while waiting for your cable.
See XDA rule #1
--
Sent from my mind to your screen.

mindmajick said:
You might want to start reading before you permanently brick your device
Start here:
http://forum.xda-developers.com/showthread.php?t=2228539
The "someone" is correct... But save yourself somw hassle and read everything you can while waiting for your cable.
See XDA rule #1
--
Sent from my mind to your screen.
Click to expand...
Click to collapse
I'm sorry, I know im asking dumb questions; honestly I'm new to this and I just need some help and I do appreciate the help you are providing. I have read the link you posted, but I have one more question. When I plug in the Factory Cable is fastboot something that is already on the device? I dont think I installed fastboot on my device (if it can even be installed) But I know for a fact that my KF2 is rooted. I know this is a dumb question, but the only way for me to find out is if I ask. Thanks.

https://www.google.com/webhp?client...rce=hp&q=what+is+fastboot&oq=what+is+fastboot
--
Sent from my mind to your screen.

TruElement said:
I rooted my Kindle Fire 2 about a week ago and I was really enjoying it. Today I decided that I wanted to get cyanogen mod on my kindle. I went to a a forum page here on XDA which had a one click thing for TWRP. I downloaded it onto my kindle and started to install it. I allowed it with superuser, but then my screen went black and turned red. Now I'm kind of nervous because I've read that now I need to use a Factory/Fastboot cable to restore it. Is there any other way for me to restore my kindle? I can turn it off by holding the power button for 20 secs, but when I turn it back on the logo flashes for 2 secs and the red screen comes back.. Please help.. I'm kinda upset right now
Click to expand...
Click to collapse
i have the problem two days ago and i was crazy about that, but i did a factory cable

Red Screen Fixed !!!!
TruElement said:
I rooted my Kindle Fire 2 about a week ago and I was really enjoying it. Today I decided that I wanted to get cyanogen mod on my kindle. I went to a a forum page here on XDA which had a one click thing for TWRP. I downloaded it onto my kindle and started to install it. I allowed it with superuser, but then my screen went black and turned red. Now I'm kind of nervous because I've read that now I need to use a Factory/Fastboot cable to restore it. Is there any other way for me to restore my kindle? I can turn it off by holding the power button for 20 secs, but when I turn it back on the logo flashes for 2 secs and the red screen comes back.. Please help.. I'm kinda upset right now
Click to expand...
Click to collapse
i just fixed mine it had a red screen I tried everything....but what worked was the kindle fire first aide...YAY!!!!!
i flashed to 10.2.3 and and rooted it's all good....but you gotta use a fastboot cable...SWEET!!!!

bigrob504 said:
i just fixed mine it had a red screen I tried everything....but what worked was the kindle fire first aide...YAY!!!!!
i flashed to 10.2.3 and and rooted it's all good....but you gotta use a fastboot cable...SWEET!!!!
Click to expand...
Click to collapse
sent you PM if you got it.. needing some help.... thanks!

mistaanime said:
sent you PM if you got it.. needing some help.... thanks!
Click to expand...
Click to collapse
Okay you need factory cable it's really the fastboot cable..got mine from ebay bout $5...download kindle fire first aide...
download and install sdk manager((google it).....plug your kindle to your computer....(with the fastboot cable your screen on the kindle should say fastboot)open the kindle fire first aide and run the RunMe.bat file...choose restore image and run the program....the program also lets you root your device again.....Hope I helped you
Here's a link for the cable and a guide
google this kindle fire hd fastboot cable from ebay

bigrob504 said:
Okay you need factory cable it's really the fastboot cable..got mine from ebay bout $5...download kindle fire first aide...
download and install sdk manager((google it).....plug your kindle to your computer....(with the fastboot cable your screen on the kindle should say fastboot)open the kindle fire first aide and run the RunMe.bat file...choose restore image and run the program....the program also lets you root your device again.....Hope I helped you
Here's a link for the cable and a guide
google this kindle fire hd fastboot cable from ebay
Click to expand...
Click to collapse
Do I have to have my own system image backup? I wasn't able to "adb pull" before all of this because it wouldn't give me r/w permissions due to something called a protective shell or something?

supergaara2 said:
Do I have to have my own system image backup? I wasn't able to "adb pull" before all of this because it wouldn't give me r/w permissions due to something called a protective shell or something?
Click to expand...
Click to collapse
It helps but you can use Kindle Fire FirstAid and a factory fastboot cord and restore to factory. http://forum.xda-developers.com/showthread.php?t=2096888 You can make a fastboot cord or buy one for 10 bucks, up to you.

He did a good job describing everything.
If you want to try getting custom recovery again, root your Kindle Fire using Bin4ry's method. Use the new method (No Xperia stuff - You'll know when u use it). And use Kindle Fire First Aid and disable OTA updates. Download TweezerMod Installer (Google it) and follow instructions. You will be as amazed, excited, and happy as at first when you recovered your kindle.

help me
bigrob504 said:
i just fixed mine it had a red screen I tried everything....but what worked was the kindle fire first aide...YAY!!!!!
i flashed to 10.2.3 and and rooted it's all good....but you gotta use a fastboot cable...SWEET!!!!
Click to expand...
Click to collapse
cam you help me to unbrick my kindle fire in red screen with kindle fire first aid please

I have installed 22 different driver packages. None work. My PC connects to all my phones so I don't think the problem is there. USB port 2.0. Brand new factory cable (gets fast boot) canyon have the driver pack that works? I can believe how many bs file I have downloaded.
Also, yes, I uninstalled each one after failure an deleted all associated files. Please help before my wife shoots me!!

whodisname said:
I have installed 22 different driver packages. None work. My PC connects to all my phones so I don't think the problem is there. USB port 2.0. Brand new factory cable (gets fast boot) canyon have the driver pack that works? I can believe how many bs file I have downloaded.
Also, yes, I uninstalled each one after failure an deleted all associated files. Please help before my wife shoots me!!
Click to expand...
Click to collapse
Turns out thing work better when you actually know what you are doing. But at leas I gained some knowledge. probably had the right drivers for a day and a half. Smh