Hi!
Could somebody tell me what the other possible values for #NCCONS# ???
I'm assuming that Ev or EVDOrA (if I use NCCON) is 3G. But since I have no 4G WiMax or LTE signal I don't know what the value would be. Also if I'm a GSM network it's not going to be Ev. I'm on a CDMA network. I just want to cover my bases that if I do release a widget that I get the proper values!
Thanks for your help!
Related
please read as this should affect everyone who forces roam on sprint..
ok so i managed to change my prl via this thead
http://forum.xda-developers.com/showthread.php?t=1733276
and this thread
http://forum.xda-developers.com/showthread.php?t=1660740
but i cant get my s3 to actually roam like it did with previous devices
ive read this thread
http://forum.xda-developers.com/showthread.php?t=1673196
that says about changing your cellar band to get it roaming.
the problem is that the *#*# code does not work for our phone.
my question is does anyone know of a working code to change the cell band for our device, and has anyone successfully get their s3 roaming??
thanks guys
I want to know this as well. Does the radio for SGS3 has the same problem as the SGS2?
Does it only roam on 800Mhz?
osva said:
I want to know this as well. Does the radio for SGS3 has the same problem as the SGS2?
Does it only roam on 800Mhz?
Click to expand...
Click to collapse
i was able to use roam control on the gs2 but not the gs3.
when i do ##3282# -edit-others-HDR/1x Sleection and change that to evdo only it does connect to roaming BUT it messes alot of calls and sms is unusable.
so i know it can roam on another network, there is just some added setting that i must be missing..
Well I can't roam with GS2. Im from Puerto Rico and apparently almost all towers are 1900
so i think i got it to work my speed is much faster ...but here is the thing i dont know and maybe someone can help me .... when i check on netmonitor it says carrier sprint but when i check the prl it says the prl i wrote (111115)
so if anybody has any ideas le me know
thanks
update: speeds are back down ..never mind... it would b nice if somebody got it to work =(
Whenever I switch to a Jellybean ROM, no matter which ROM it is, I cant get a signal, even if it is listed as working in the original post. Usually I just cant get data or MMS on Sense 4/4.1 ROMs, but with JB I dont get any. Does anyone know whats wrong?
Make sure you have the correct APN settings for T-Mobile.
BTW doesn’t T-Mobile use 1700/2100 AWS band for 3G data? One X doesn’t support 1700Mhz, so I don’t think you can get 3G on it, only the older terribly slow 2G data service.
PhoenixFx said:
Make sure you have the correct APN settings for T-Mobile.
BTW doesn’t T-Mobile use 1700/2100 AWS band for 3G data? One X doesn’t support 1700Mhz, so I don’t think you can get 3G on it, only the older terribly slow 2G data service.
Click to expand...
Click to collapse
Yeah, I know I wont get 3G. I dont get any cell service at all. No calls, no text.
hello, i have tmobile n900t and only have 3g reception, problem is that 3g isnt always there (like in basement or outside town), phone then should automatically shift to E but it doesnt. i live in country with 2g network on 900mhz. i have full signal bar reception but im not registered on network, cant make receive calls or anything.
is there any help for this? do something to phone software?
or maybe change the network carrier; i wonder whats the gsm bands that sm n900t works on?
heres details my carrier is under the name "VIP NET d.o.o.", also theres frequencies of other carriers in my country. -> http://www.hakom.hr/UserDocsImages/...ne pokretne komunikacijske mreze-20121029.pdf
help pls
im pretty sure that my apn and modem are good
Hi
Currently I'm not being able to get the 4G network and in mu country they're using the 1800 frequency (LTE 1800).
Is there a way to change it in the settings so as I can get hold of the 4G?
Thanks.
lenovop780 said:
Hi
Currently I'm not being able to get the 4G network and in mu country they're using the 1800 frequency (LTE 1800).
Is there a way to change it in the settings so as I can get hold of the 4G?
Thanks.
Click to expand...
Click to collapse
You should get 4g on the 1800 frequency. You can change between 3g and 4g in mobile data settings. However even if your network has 4g it will display 3g if you are not in a strong 4g signal area. It is the same here in the UK, 4g is fine where I live but I go over a bridge 5 minutes walk away and I can only get 3g! On some networks you need a new sim card for 4g to work as I did. Also do you have the correct APN settings for your network?
Yes I have the correct APN; otherwise if it's wrong I won't even get any data connection. Yes, I might be in a region where it's weak or unavailable but when I'm in a region fully covered by 4G, just outside the HQ of Orange, I still don't get it.
Try using mtk engineering mode app from play store(by go! or themonster) to force LTE - it's under telephony/network selecting.
yes then what do you do?
I hace an htc m9 sprint. I have some issue because I cant select just 2G (when I'm in bad reception area), or in my signal bar there is just a G (dont know If I'm on 3G or 2G).
So I want to know if its ok to select that my device is not sprint in aroma (for custom roms of course). I'm not S-OFF.
Or there is any way to force my sprint version to show H, H+, E Icons on signal bar instead of GSM?
Nope, it is what it is. G is for gprs which is basically 1.5G. If your phone cannot lock onto a higher bandwidth there is nothing you can do because it simply isnt there.
No matter how many rain dances you do or human sacrifices you make, you can't make the phone do it.
Beamed in by telepathy.
Please search via google for the difference between GSM and CDMA. Since those are two different technologies chances are high that you can't get high speed connections if you try to use a CDMA device on a GSM network or vice versa. Hardware and partition layout differ between the CDMA and the GSM versions of the M9.
The options in the aroma installer are meant to be chosen according to the hardware you're using and not according to your actual carrier.
Sent from my HTC One S using XDA Labs
I know about that, but the speeds are good. Like any other 3G phones. I just want the options to force for example just 2G when I'm on 3G low signal area. and show the corrects icons. The phone was from a friend first, and he told me that before upgrading, shows H on signal bars. If I go to about, network, here say HSPA