Hello everyone i'm new on this site and I just want to share and need help on my current problem on my LG Optimus G Pro F240k
I start experiencing this unusual behavior after i download a movie then had an error while downloading the file
after that i noticed my g pro is heating up even though i'm not using it and even a I closed all the recent apps that i opened
from my cpu-z app i monitored the temp of my unit and surprisingly my unit is heating up to 46c wihtout using it so what i did is to turn in off
and when i turn it on after 2-3mins it started to heat up again so that's the time I tried to install cpu task manager app "Watchdog" with the use of this app it detected a linux process "migration/x" that use 99.9% of each cores that why it easily heats up my unit,
at this moment I turn off my unit and looking for some solution if there still some way to fix it.
Hope to give you an info and help me for this issue.
Thanks
Related
hi all, this is the first time i come here
I am using LG Optimus G, i have tried many rom(event stock) for my phone, but in standby mode my phone drain 2%-3%/1h.
When i set Screen 100%, listening music via 3G and use camera(with flash on), my phone lose 85% baterry energy for 2h 30minutes, so i think my battery phone was fine.
I have tried many ways to improve batterry life, but nothing change.
I also use Greenify and Titanium to freeze some app and service, but the problem still come
Please give me some suggestion, thank you :fingers-crossed:
I also tested in "Airplane mode", my phone still drain 2%/1h
Opening another thread with same issue will not get you a faster response,on the contrary,will get you a report. It's forbiden,haven't read the rules?i told you on the other thread what you should do. I don't like repeating things.
Sent from stock LG E975/smart phones,dumb people. now Free
Guys, excuse my English.
This week I bought 2 tablets Lg g Pad. One for me and one for my girlfriend
I think that mine is defective because it almost never gets past the test of Antutu. Always inform your tablet which will be shut down because of heat and it turns off automatically. The few times I managed to do the test, it registers 19 to 22mil points.
On the tablet of my girlfriend I can do this test and usually always score reaches 25,000 points, with little variation.
Someone already managed to fix this? I'll have to take it to rma?
Another recurring problem I'm having with my tablet is the message "Unfortunately, bluetooth has stopped" every time I open the TrackID app. Although I have tested bluetooth and is running smoothly.
joaovictorssa said:
Guys, excuse my English.
This week I bought 2 tablets Lg g Pad. One for me and one for my girlfriend
I think that mine is defective because it almost never gets past the test of Antutu. Always inform your tablet which will be shut down because of heat and it turns off automatically. The few times I managed to do the test, it registers 19 to 22mil points.
On the tablet of my girlfriend I can do this test and usually always score reaches 25,000 points, with little variation.
Someone already managed to fix this? I'll have to take it to rma?
Another recurring problem I'm having with my tablet is the message "Unfortunately, bluetooth has stopped" every time I open the TrackID app. Although I have tested bluetooth and is running smoothly.
Click to expand...
Click to collapse
I believe the overheating gpad should be rma'd or returned to the place of purchase and exchanged. Something is definitely wrong and of the few I have heard had overheating issues I have not heard of anyone fixing them themselves...
There are different CPU bin's out there. You might have one that takes a higher voltage to hit max clocks. As it is I feel the Gpad runs very close to that software shutdown limit in my testing. I can't remember the number off the top of my head but the stock LG kernel thermal shutdown is like 95 or 97, the qualcomm hard shutdown is 120 I think. So it *is* possibly to fix by changing the kernel shutdown limit higher. I don't think that should be necessary though for the owner to do, that tablet should work with all 4 cores at 100% or you aren't getting what you paid for. You can see in your Antutu scores that yours is thermal throttling the CPU speed and STILL exceeding the limit sometimes.
You can use Faux Clock to turn off thermal settings.
joaovictorssa said:
Guys, excuse my English.
This week I bought 2 tablets Lg g Pad. One for me and one for my girlfriend
I think that mine is defective because it almost never gets past the test of Antutu. Always inform your tablet which will be shut down because of heat and it turns off automatically. The few times I managed to do the test, it registers 19 to 22mil points.
On the tablet of my girlfriend I can do this test and usually always score reaches 25,000 points, with little variation.
Someone already managed to fix this? I'll have to take it to rma?
Another recurring problem I'm having with my tablet is the message "Unfortunately, bluetooth has stopped" every time I open the TrackID app. Although I have tested bluetooth and is running smoothly.
Click to expand...
Click to collapse
I have absolutely same problems. Antutu test become my pad overheated and go to shutdown. I try to run Antutu without heat protection- same problem but shutdown without message on same place. Also I have some extra temperature while using Chrome or Opera and open a lot of bookmarks. Brightness lowering automatically due overheating and come back automatically then device become "normal" temp. I have 4.4.2 Rooted stock firmware. V50020a.
to disable automatic lowering the brightness, use app from the play store called: "LGBrightnessPatcher", NO SPACE.
also can be used to other LG's devices...
Jhon998 said:
to disable automatic lowering the brightness, use app from the play store called: "LGBrightnessPatcher", NO SPACE.
also can be used to other LG's devices...
Click to expand...
Click to collapse
Tnx, but that only solution for prevent brightness lowering not overheating problem.
Karmashkinjo said:
Tnx, but that only solution for prevent brightness lowering not overheating problem.
Click to expand...
Click to collapse
Does this have any fix? I am facing the same problem in my g pad its turn automatically off show the message that tablet is heating up.
Issue with mine is that it gives this error and shuts down but in actual its quiet cool.
Mohib said:
Issue with mine is that it gives this error and shuts down but in actual its quiet cool.
Click to expand...
Click to collapse
What ROM are uou using ? Consider flashing @adrianom 's AOSP 7.1.2.... Flawless and latest available
Cheers
dirlan2001 said:
What ROM are uou using ? Consider flashing @adrianom 's AOSP 7.1.2.... Flawless and latest available
Cheers
Click to expand...
Click to collapse
I am.on stock rom. I don't think I can flash any other rom as it's an AT&T one so locked bootloader and no custom recovery etc...
Hello XDA.
Since the Update to Lollipop my G3 has some serious problems. like Heating up as hell - especially when i play games like PvZ2 its getting rly darn hot - and shut down for overheat-reasons once.
But today i was chatting (FB Messenger) and my Phone decided to turn off complely.
It was impossible for me to switch it back on, even pulling out the Battery does not help.
When i connected the Power-Cable, it startet charching after 4-5min (starting @ 84% Charge) - and it was possible to turn it on.
Does anyone of you have a clue what problem this could be - some kind of technical defect?
Or is it just Software-Related?
Oh - Infos to the Device:
D855-32GB International/EU Model
SW-Version: V20f-EUR-XX
DominikAT said:
Hello XDA.
Since the Update to Lollipop my G3 has some serious problems. like Heating up as hell - especially when i play games like PvZ2 its getting rly darn hot - and shut down for overheat-reasons once.
But today i was chatting (FB Messenger) and my Phone decided to turn off complely.
It was impossible for me to switch it back on, even pulling out the Battery does not help.
When i connected the Power-Cable, it startet charching after 4-5min (starting @ 84% Charge) - and it was possible to turn it on.
Does anyone of you have a clue what problem this could be - some kind of technical defect?
Or is it just Software-Related?
Oh - Infos to the Device:
D855-32GB International/EU Model
SW-Version: V20f-EUR-XX
Click to expand...
Click to collapse
sounds like an rogue app try using wakelock detector to pinpoint it, then delete his data, if that doesnt work delete the app, in wakelock detector see cpu wakelocks
Hi everyone i have an extreme drianing battery with a no name process only a stick of android somebody can help me to fix it or what kind of app is doing this? Thanks. more info on pictures
pochin01 said:
Hi everyone i have an extreme drianing battery with a no name process only a stick of android somebody can help me to fix it or what kind of app is doing this? Thanks. more info on pictures
Click to expand...
Click to collapse
Go into settings then apps then running on your phone and see if you can see anything there, check for connect (moto connect) tap it and see what is running. There are likely 4 processes, if you have wakelock detector you could use that also to possibly narrow it down (requires root). Also check your location settings the watch could be using GPS to find your location which will affect both batteries (phone and watch).
I have the same thing. No processes under running apps on my phone that standout
Download cpu spy from playstore and let it run for a while. See if your phone is entering deep sleep after about half an hour. I am going to guess it is running at 300mhz and no entering deep sleep. What this will mean is the watch is communicating with the phone and not letting it sleep. Would be helpful to know what you have running on the watch ie. fit, moto body, google now cards and how many...
Just received my Moto 360 too. Got the same processes. And also a kind of very high android wear usage...
What do you guys have turned on? ambient, tilt to wake, card previews? I have all that turned off on mine, for me, watch idle is at the top followed by android wear 16% idle, 4% android wear.... then some other lower numbers.
Hello.
I have a problem on my lg g3, then i was using it i noticed that touch screen stopped working... I tried to lock the phone and unlock but for around 15sec i couldn't, phone didn't respond at all. After 15sec phone responded and unlocked and everything was fine. Some time later i noticed that this problem appeared again, but this time it's constantly occurring. I thought it was software (stock 6.0) problem, so i installed cm14 rom, but it didn't help :/.
Then i scroll through facebook CPU jumps to 80°C (idle drops to 40°C, but in use stays around 65°C)...
EDIT: Installed stock mm rom, temperature is a bit lower but still on fb it stays around 70°C, and cpu usage is most of the time at 100% (70% on idle)
wtf is wrong?
Phone was NOT dropped anywhere, or soaked in water
Help pls :/