Develop Bugs

Cannot connect Windows Live :(

I tried GPRS , HSDPA whatever,
it just show the attached screen.
any idea?

I get the same on 3-UK. Reception is fine as well. Think my network may block it as they want you to use their own version of MSN (not compatible with the TyTN). Works fine on wifi though.
S.K.

I am using 3-HK, I tried once success to be connected.
but after that, never connect success anymore.
EDITed: Wifi is the same result :-(

The same happens in Yoigo (Spain)
I have the same problem, my 3G provider (Yoigo) has a proxy and use an MTU value = 472 (that is not the 1500 by default). I'm trying to change this value because people says Live works fine changing it.
Try to change MTU (diferents values for your ISP) if you know an utility that do this easily please share it.
Thanks

I have no idea about which registry is MTU appear.
Is there any tools or name that I can search?
Thanks

is this location ?
HKLM\Comm\Cellular Line\Parms\tcpip
if yes, still cannot connect......

Can anyone post the
HKLM\Services\Windows Live\Platform\Passport
Policy key value?
it seems this have problem
Thanks

Manually Programming HTC Incredible For Verizon Networks

So when you activate a new phone you have to do all the *228 stuff to register it on verizons network. Since the phone gets programmed OTA you have to be using a Verizon network. Thats where my first problem happened. Since I'm in Alaska and there are no Verizon towers (just partners) everywhere is roaming and you cannot do the OTA update/activation.
I got the phone programmed by changing the NAM settings by "calling" ##778 but only voice and sms work right now.
Now the only problem is that I don't know exactly what I need to change to get the data communications working. I know in order to use data communication on a partner network (while in roaming) you have to first use some kind of data transfer on a verizon network. I can only guess that is so the phone gets programmed properly.
If anyone would care to share their knowledge or share their Modem Settings and M.IP profile information hopefully I can get this thing working 100% again; and by not using verizon's "only" method (as the customer service says)

Call back VZW and tell them that you need to do a manual program - I used to work there and they should walk you through all of the steps/entry over the phone.
For what it's worth - Here are my settings
M.IP Settings
Number of Profiles: 1
Active User Profile Index: 0
MIP MODE: Mobile IP Preferred
MIP Registration Retries: 2
MIP Registration Retry Timeout: 0
Mobile Node-HA Authentication: Enable
Send a Registration Request: Disable
Dormant Handoff Optimization: Enable
___________________________________________
M.IP Default Profile
Enable Profile: Enable
NAI: [email protected]
DUN NAIL: Failed
MN HA SPI Set: Enable
MN HA SPI Value: 12C
MN AAA SPI Set: Enable
MN AAA SPI Value: 2
Reverse Tunneling Preferred: Enable
Home Address: 0.0.0.0
Primary HA Address: 255.255.255.255
Secondary HA Address: 255.255.255.255
DMU Public Key: 10
_____________________________________________________
Modem Settings
Slot Cycle Index: 2
Preferred Serving System: Automatic
Preferred Mode: Automatic
HDR Hybrid Preferred: Enable
Clear All MRU Entry: No
Rev A. Enable
1x Diversity: Disable

I appreciate the insight espmetalhead, however when I called vzw and asked them about manually programming it they said the only thing they can manually program is voice/sms. To program the phone for data you HAVE to be in a verizon network no matter what. I don't really understand why. I have another phone (blackberry 8330) that has working data communication here in alaska. WHy can't you just take whatever settings the blackberry has for data and use it on the incredible? lol. man, its so frustrating. I really don't want to ship my phone to my parents and walk them through programming the incredible for me haha.
espmetalhead: hopefully in your experience you've came across a way to manually program a phone for data communication...

There is a way to do it from what I remember, you just have to get to a data tech this is high enough in the chain so they can do a walk through. A csr over the phone should be able to route you to the right person. I know I did some Windows Mobile device manual programs that fired up data.
Sent from my ADR6300 using XDA App

akrutsinger said:
I appreciate the insight espmetalhead, however when I called vzw and asked them about manually programming it they said the only thing they can manually program is voice/sms. To program the phone for data you HAVE to be in a verizon network no matter what. I don't really understand why. I have another phone (blackberry 8330) that has working data communication here in alaska. WHy can't you just take whatever settings the blackberry has for data and use it on the incredible? lol. man, its so frustrating. I really don't want to ship my phone to my parents and walk them through programming the incredible for me haha.
espmetalhead: hopefully in your experience you've came across a way to manually program a phone for data communication...
Click to expand...
Click to collapse
Unfortunately, you have to be in the Vz network to program for data. They use an authentication key that can only be transmitted OTA through their own network for data services. It's a CDMA thing, so there's really no way around it.

so why isn't it possible to just read the key to me over the phone or something?
Idk, it just doesn't seem right. It seems like that has to be a way to do it manually...
Maybe I'm just in denial because I really don't want to send it back to the lower 48

Manually Programming for Data
Does anyone know how to program the Incredible to get data? For some reason after updating to 2.3.4 it just quick making calls and getting onto mobile networks. I solved the making calls issue by manually programming it through ##778. But now I'm without data, so does anyone have any ideas on how to get this accomplished? Any help would be great! Thanks!

need help for activating my phone
espmetalhead said:
Call back VZW and tell them that you need to do a manual program - I used to work there and they should walk you through all of the steps/entry over the phone.
For what it's worth - Here are my settings
M.IP Settings
Number of Profiles: 1
Active User Profile Index: 0
MIP MODE: Mobile IP Preferred
MIP Registration Retries: 2
MIP Registration Retry Timeout: 0
Mobile Node-HA Authentication: Enable
Send a Registration Request: Disable
Dormant Handoff Optimization: Enable
___________________________________________
M.IP Default Profile
Enable Profile: Enable
NAI: [email protected]
DUN NAIL: Failed
MN HA SPI Set: Enable
MN HA SPI Value: 12C
MN AAA SPI Set: Enable
MN AAA SPI Value: 2
Reverse Tunneling Preferred: Enable
Home Address: 0.0.0.0
Primary HA Address: 255.255.255.255
Secondary HA Address: 255.255.255.255
DMU Public Key: 10
_____________________________________________________
Modem Settings
Slot Cycle Index: 2
Preferred Serving System: Automatic
Preferred Mode: Automatic
HDR Hybrid Preferred: Enable
Clear All MRU Entry: No
Rev A. Enable
1x Diversity: Disable
Click to expand...
Click to collapse
hi this is Waseem from Pakistan i am facing much problems in activating my HTC droid incredible 2.
i have tried alot to update my phone but it's not working and the activation dialer is also work-less. please guide me through the whole procedure, what should i do next to activate my phone. i already have restored the factory setting twice but still not updating... i wil be very thankful to you for this act of kindness.

Ruud Westerhout said:
As a matter of interest :
1) Should I be disconnected from the net when I do this ?
2) Should I be taking the GSM-Card out of the phone when doing this
3) If I do a hard-reset now, and being asked x-cancel 0-hard-reset, what would be the result ?
4) Are there any other reasons for the device not being recognized, or not for soo long ?
PS. I am using the internet through a router/firewall and I am not using the XP-firewall.
Click to expand...
Click to collapse
This is the forums for the first gen incredible not incredible 2.
Sent from my One using Tapatalk

[Q] Getting Cricket Data to work on Triband Network

So I've read all of the claims that the EVO simply won't work if you're in an AWS market. Fine, no problem. Somehow i've managed to get it to work for me though! Well, talk and text on the android plan anyway. I still can't seem to get data working though :/ I was wondering if anyone could help me with this.
I started out with myn-WarmTwoPointTwo--RLS-4-Cricket-Zmod played around with settings for about 4 days and finally managed to get talk and text working. However, my "4G" radio would only take me to a webpage that asks me to sign up for clear internet service when I opened the web browser(Hmm i wonder what would happen if i signed in with my clear account, I'll try that in a moment).
Someone mentioned I go for JimminyV's cricket ROM. So i gave that a try and there didn't seem to be any difference at all, but i couldn't get a mobile network connection, so i'm thinking this ROM won't do the trick for me, I went back to twoPointTwo.
I've taken bits from all kinds of tutorials, including JImminyV's ROM post:
http://forum.xda-developers.com/showthread.php?t=784776
The Zmods:
http://forum.xda-developers.com/showthread.php?t=795126
EPST programming codes:
http://forum.xda-developers.com/showthread.php?t=737594
some post ztahoez made over at CDMAGurus.com etc.
Played around with ##Data#(I should give you my settings in there):
Data Profile:
Active Profile = 1
User Name = my#@mycricket.com
SPI MN-HA = 12C
SPI MN-AAA = 2
Reverse Tunnel Preferred = Enable
Home IP = 0.0.0.0
Primary Home Agen = 68.28.15.12
Second Home Agent = 68.28.31.12
HA and AAA shared secret = cricket
DSA Server URL = (couldn't find any info on this so i just wrote https://dsa.mycricket.com) any bells ringing?
EVDO:
DDTM = Enable
Preferred Mode = Auto
Advanced:
MEID = a hex value that can't be edited and i'm not sure if it's safe to share
P_REV = IS-2000(6)
SCM = 58
Slot Mode = Enable
Slot Cycle Index = 1
MMC = 310 - I'm in the US
MNC = 00
MSID = 4433070623 - anyone familiar with that MSID?
ACCOLC = 3
Vocoder = Enable
EVRC-B = Disable
Home and Roam ORig = Voice 13k
LBS PDE IP and Port = unavailable - what is that?
Foreign NID and SID registration = Enabled
DDTM = Enable
Home SID/NID #1 = 6535/65535 - I can't find info for this anywhere
MMS Server URL = http://mms.mycricket.com/mycricket/mms.php
RTSP Proxy Port = 554
RTSP Proxy Address = 0.0.0.0
HTTP PD Proxy Port = 8085
HTTP PD Proxy Address = 0.0.0.0
WiMAX:
Standby Time(minute) = 10
SCAN RATE = 30
NAI = [email protected]
User Name = my#@mycricket.com
Realm = mycricket.com?
a whole bunch of craziness
TLS = enabled
TTLS = disabled
My PRL is 06399
Hmm after messing around with JimminyV's ROM, I can't seem to connect to clear's sign in prompt anymore :/
Other Common problems:
I keep getting error code 65, which with a little googling, means that there's an authentication issue, somewhere :/
[EDIT] I forgot to mention that ##778# and *228 don't work, and if i use *22804, I'll usually connect to Verizon Wireless' configuration menu [/EDIT]
I've tried to be as thorough as i could be. Please let me know if you have any questions for me and if you can help, THANKS!!!

I guess I can post this over at CDMAgurus too, but just wanted you to know, that i was able to log into clear with my account lol(i'd better check if i've been charged, or the lol will be on me.

Hey here, yes here, this is why:....
HEY HERE, YES HERE, THIS IS WHY:....
The reason as to why you only get talk/text on cricket with a dual band phone on a tri-band area/AWS is the following:
Your plan has a national access/roaming (talk/text), meaning that everywhere you go, you will be able to get AT LEAST talk and text. On the regular cricket network, you get EVERYTHING.
Your phone is actually connected to sprints tower because sprint is the roaming partner with cricket. the agreement DOES NOT allows data usage, only talk/text ( i will assume because talk/text does not takes as much bandwidth as data does)
So, to sum-up:
ANY DUAL-BAND PHONE on a AWS market will be on a "Roaming Partner Network"
This is because you are using SPRINTS network (or any other romaing partner network), and the agreement only lets you use talk/text.
HOWEVER, if you take your phone where cricket offers a native DUAL BAND (800/1900) frequency, you will have data working.

Numerous people are sadly mistaken when it comes they're understanding of the Cricket EVO's functionality in triband areas. They have been lead to believe that it's impossible to get it to work or to get all of its features working, but this is about as far from the truth as it gets. People are quick to rely on information which they haven't actually tested themselves. They're like the folks in Columbus's day who didn't believe that the earth is round, but here are the facts...I live in Chicago, which is a triband area, and have been using a fully flashed Cricket EVO for quite some time now with out a single problem whatsoever. Everyone one of my features work perfectly fine, and my network is NOT roaming. Looks like Cricket EVOs work in triband areas afterall!

yeah you're not the first person to say that, but no one's been able to prove it. or show how to do it.

Laserbeak43 said:
yeah you're not the first person to say that, but no one's been able to prove it. or show how to do it.
Click to expand...
Click to collapse
I've been using the proof for a couple of months now & as far as how to do it is concerned, it's posted all over this website & others.

RioSoul said:
I've been using the proof for a couple of months now & as far as how to do it is concerned, it's posted all over this website & others.
Click to expand...
Click to collapse
Last i checked(for weeks) It couldn't be done on cricket. I've had voice but had to use clear for data.

so yyeah i've searched all EVO forums for Cricket and Triband and there's no thread that posts a solution, there are only 3 threads as a matter of fact.
So which thread were you talking about?

bumping this one, willing to donate to a dev of your choice if someone can help me get this EVO working in st. louis. i understand the AWS issues, but i think as a lot have said, that its possible in AWS markets. im willing to try anything. internet works great here with full 3g, just no getting cricket programming when *228, and *22804 does nothing but sit and then hand up. 611 says your account can not be validated.

DSA Server URL (Is it needed for internet to fully work on flashed evo?)

So i was wondering do i need the dsa server url to the carrier im using for the internet to fully work on my phone? I have just about all the settings in my data profile and advanced profile set to revol except the dsa server url, which i havent been able to find anywhere online and the rtsp proxy port, http pd proxy port, rtsp proxy address and http pd proxy address. Are these settings necessary to change the get the internet fully working on my Evo?

Also i was wondering is my internet almost working bcuz i got my MMS to work but i still cant use the web browser or market... i have a little 3g sign at the top of my screen when i turn mobile network on

I used QPST TO change most of the settings and after the phone rebooted the first time it showed the 3g sign which it didnt show before but yet i still cant access the internet

Does anyone know? I've been trying to find out myself but all i keep getting back to is the same questions which were never answered.

Nadi7115 said:
Does anyone know? I've been trying to find out myself but all i keep getting back to is the same questions which were never answered.
Click to expand...
Click to collapse
Lol I love responding to ancient questions. Sadly I do not have a direct/technical answer, but I can tell you that if I flash and my phone is refusing to "activate" I do a reset to "DSA" using service codes and it then allows me to activate and use 3g.

[Q] HTC Evo Design 4G - Change WiMAX authentication to use TTLS.

Good Morning.
(Really) Hoping I can get some help here and this doesn't wind up another dead-end thread that people look at once and pass on...
I am attempting to attach this phone to a lab setup using my own WiMAX base station.. The rub is my Radius is configured to do TTLS authentication. The default WiMAX setting in the phone is TLS and it does not appear to be edit-able even after entering the MSL.
Is there a hidden menu where I can change the device to allow TTLS vs. TLS.. Or alternatively, where can I overwrite the default x.509 cert with my own x.509 client cert so I can perform TLS authentication against my own AAA?
My other option is using the Motorola Photon Q, but again I'm running into the same issue on that phone, Locked to TLS with no option to edit...
Thanks,
-Adam

overturfa said:
Good Morning.
(Really) Hoping I can get some help here and this doesn't wind up another dead-end thread that people look at once and pass on...
I am attempting to attach this phone to a lab setup using my own WiMAX base station.. The rub is my Radius is configured to do TTLS authentication. The default WiMAX setting in the phone is TLS and it does not appear to be edit-able even after entering the MSL.
Is there a hidden menu where I can change the device to allow TTLS vs. TLS.. Or alternatively, where can I overwrite the default x.509 cert with my own x.509 client cert so I can perform TLS authentication against my own AAA?
My other option is using the Motorola Photon Q, but again I'm running into the same issue on that phone, Locked to TLS with no option to edit...
Thanks,
-Adam
Click to expand...
Click to collapse
Anyone? Anyone at all?

To get to the Menu you want go to the Dial pad, and type ##3282# . It will ask you EDIT, or View. You want EDIT. It will then prompt you for your MSL. It's a six digit Password. Enter the Password. Then choose WIMAX. The settings to Enable, or Disable TTLS / TLS are there. If you do not have your MSL, you can download MSL Reader from the Play Store.