Related
my friend tried to root his T999 but messed up on a step im guessing so now his phone will boot straight to odin mode. i tried putting it in download mode and use odin3 to restore it back to stock but odin3 would get stuck at the "nand write start" stage. his phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." when it is powered up. does anybody know how to fix this issue?? any help would be great! i googled everything that i could think of and tried everything that was suggested but nothing works! thanks in advance!!
sushi829 said:
my friend tried to root his T999 but messed up on a step im guessing so now his phone will boot straight to odin mode. i tried putting it in download mode and use odin3 to restore it back to stock but odin3 would get stuck at the "nand write start" stage.
Click to expand...
Click to collapse
Contradictory. Is it in download mode or isn't it?
You did not say what was being flashed with Odin, either.
Phones do not boot into ODIN. You will have to provide more info so we can help.
Links to the ROM or software you used etc.
ok i shouldve explained this a little more clearly. when i power on the phone it says this...
ODIN MODE
PRODUCT NAME: SGH-T999
CUSTOM BINARY DOWNLOAD: Yes (10 COUNTS)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
so i pulled the battery, put it in download mode (vol down + home + power) ran ODIN3, and tried to flash SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original (which is a stock image) thats when it gets stuck at the NAND write start!!
I could be completely wrong but it appears you tried to install an incompatible rom.
are you talking about the SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original file?
sushi829 said:
are you talking about the SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original file?
Click to expand...
Click to collapse
Yes. I have not seen MBALH2 before regarding the tmo galaxy s3. I could be wrong. Hopefully someone more knowledgeable than me will chime in.
i also used this file too
T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar
i downloaded the firmware from http://samsung-updates.com/device/?id=SGH-T999
sushi829 said:
i also used this file too
T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar
i downloaded the firmware from http://samsung-updates.com/device/?id=SGH-T999
Click to expand...
Click to collapse
If I understand correctly you flashed that after the first one. I'm not a IT guy, but to the best of my understanding if you flash a ROM intended for another device you are going to have major issues. Sorry. I know my answers are not what you are looking for. I am trying to give you a heads up for your friends phone.
well i am trying to flash the correct firmware for his tmobile S3.
jcbofkc said:
If I understand correctly you flashed that after the first one. I'm not a IT guy, but to the best of my understanding if you flash a ROM intended for another device you are going to have major issues. Sorry. I know my answers are not what you are looking for. I am trying to give you a heads up for your friends phone.
Click to expand...
Click to collapse
He didn't flash the wrong file. Some other issue. Try a different data cable and USB port.
i tried to upgrade my s3 i accidentally falshed with correpted file('i renamed the file .mb5 to .tar) it stuck and showing that needed to connect kies
.. and kies not detecting my device and it wont boot into recovery mode but after search i rooted again through cf auto root and then it can enter into recovery mode is it bricked/not what happend to my device currently it can enter into both recovery &download mode ......
pls help me with this
ghjsdf9 said:
i tried to upgrade my s3 i accidentally falshed with correpted file('i renamed the file .mb5 to .tar) it stuck and showing that needed to connect kies
.. and kies not detecting my device and it wont boot into recovery mode but after search i rooted again through cf auto root and then it can enter into recovery mode is it bricked/not what happend to my device currently it can enter into both recovery &download mode ......
pls help me with this
Click to expand...
Click to collapse
Welcome to the forum! Your phone's hardly bricked if you can get to download and recovery modes. Flashing the correct (stock) firmware should get you back to working conditions. What Android version were you on prior to it being stuck and what were you trying to upgrade to?
Larry2999 said:
Welcome to the forum! Your phone's hardly bricked if you can get to download and recovery modes. Flashing the correct (stock) firmware should get you back to working conditions. What Android version were you on prior to it being stuck and what were you trying to upgrade to?
Click to expand...
Click to collapse
THANKS FOR WELCOME PARTY:
and for the rly tooo.
i can get into both download mode as well as recovery mode ..... i'm not clear with my phones model-in odin mode it showing "PRODUCT NAME:-SGH-I747M" on starting it is running 4.1.2 (zsemc1) version i am not clear with baseband etc.
and i'm not clear with supported varient versions when i flashed with different version in odin mode it showing differnt causes for different version
ex: "unsupported dev type","secure check fail sb12",securechech fail aboot" for three different versions
ghjsdf9 said:
THANKS FOR WELCOME PARTY:
and for the rly tooo.
i can get into both download mode as well as recovery mode ..... i'm not clear with my phones model-in odin mode it showing "PRODUCT NAME:-SGH-I747M" on starting it is running 4.1.2 (zsemc1) version i am not clear with baseband etc.
and i'm not clear with supported varient versions when i flashed with different version in odin mode it showing differnt causes for different version
ex: "unsupported dev type","secure check fail sb12",securechech fail aboot" for three different versions
Click to expand...
Click to collapse
i747M is for the Canadian and Mexican variants. If you were on stock 4.1.2, you should be able to Odin back to stock 4.1.1 or upgrade to 4.3 via custom recovery. You can go to the thread below to check the correct stock image for your phone based on carrier. Make sure you use the correct image as flashing the wrong version could hard brick your phone. Download to your PC and then flash. If you select the 4.3 version, you would need to flash custom recovery to your phone via Odin, save the file to a (micro) SD card and then flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
Let me know if this works for you.
Larry2999 said:
i747M is for the Canadian and Mexican variants. If you were on stock 4.1.2, you should be able to Odin back to stock 4.1.1 or upgrade to 4.3 via custom recovery. You can go to the thread below to check the correct stock image for your phone based on carrier. Make sure you use the correct image as flashing the wrong version could hard brick your phone. Download to your PC and then flash. If you select the 4.3 version, you would need to flash custom recovery to your phone via Odin, save the file to a (micro) SD card and then flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
Let me know if this works for you.
Click to expand...
Click to collapse
i'm Asian it worked for local networks before bricked so i'm not clear with choosing in versions... ["help me with it"]
ghjsdf9 said:
i'm Asian it worked for local networks before bricked so i'm not clear with choosing in versions... ["help me with it"]
Click to expand...
Click to collapse
If we are going to flash a stock ROM, we would need to flash the correct version as there is risk of a worse brick if we flash the wrong one. When the phone was working normally, the old network would probably be showing during booting. If you got it from abroad, please check if you can get the information from the previous owner. If there is no way of telling the correct firmware, then you can flash custom recovery to the phone and try flashing a custom ROM via recovery. It's always tidier flashing a custom ROM to a device functioning normally but, unless we can be sure of the correct stock firmware to flash, your options may be limited.
Larry2999 said:
If we are going to flash a stock ROM, we would need to flash the correct version as there is risk of a worse brick if we flash the wrong one. When the phone was working normally, the old network would probably be showing during booting. If you got it from abroad, please check if you can get the information from the previous owner. If there is no way of telling the correct firmware, then you can flash custom recovery to the phone and try flashing a custom ROM via recovery. It's always tidier flashing a custom ROM to a device functioning normally but, unless we can be sure of the correct stock firmware to flash, your options may be limited.
Click to expand...
Click to collapse
and finally i found the correct version and when tried to flash through odin i came across this problem
it stuck at "initialization..." [more than hour..] help pls......
ghjsdf9 said:
and finally i found the correct version and when tried to flash through odin i came across this problem
it stuck at "initialization..." [more than hour..] help pls......
Click to expand...
Click to collapse
Sounds like a partition problem. Please let me know the firmware version you are trying to flash.
Larry2999 said:
Sounds like a partition problem. Please let me know the firmware version you are trying to flash.
Click to expand...
Click to collapse
it's version 4.3(I747MVLUEND2_I747MOYBEND2_SPC) at sammobiles.com............
and once "i tried with pit file by marking re partition" will this effect ??????????????
ghjsdf9 said:
it's version 4.3(I747MVLUEND2_I747MOYBEND2_SPC) at sammobiles.com............
and once "i tried with pit file by marking re partition" will this effect ??????????????
Click to expand...
Click to collapse
I've seen this particular problem reported several times and it's always been a problem with the pit file. Flashing a complete stock system should fix all partition problems though. If the stock file you are using is an Odin flashable file, you may try using Odin 3.09. Otherwise, I'd suggest you find a recovery flashable image and flash via (custom) recovery.
hy
my note won't boot anymore.
i installed rom manager to my device and there was a message that i had a twrp recovery an there was and function to reboot in recovery.
after wanting to reboot, the note won't boot anymore. it just go to the samsung image and then it quits. with hard buttons i can get into download mode but not in recovery mode
what should i do
please help
_nicolas_ said:
hy
my note won't boot anymore.
...
what should i do
please help
Click to expand...
Click to collapse
Flash your stock rom via odin in download mode
thanks gonna try that. i am downloading some firmware from sammobile.com
does the region make a difference because my country isn there
_nicolas_ said:
thanks gonna try that. i am downloading some firmware from sammobile.com
does the region make a difference because my country isn there
Click to expand...
Click to collapse
No, Just flash any region
Hi,
I just brick my i747 and after use debrick image of 4.4.2 my phone alive but problem is phone do not boot without sd card, someone suggest me to flash first I747UCUFNE4 4.4.2 bootloader file along with pit file , later install 4.4.2, so I dont have these fiels, really appreciate if someone help in this issue, thanks br
this will get you the UCUFNE4 bootloader and modem.
http://forum.xda-developers.com/showthread.php?t=2808654
sorry i dont have the pit file.
good luck, and remember that once you upgrade to KK ; you CANNOT downgrade or you will BRICK.
err on the side of kindness
This might help for the pit file: http://forum.xda-developers.com/showthread.php?t=1848264
thanks both of your, porblem solved
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
hunter99507 said:
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
Click to expand...
Click to collapse
post complete history of your phone
hunter99507 said:
Im new to all of this, but I screwed up my phone flashing a stock image. Odin does see my phone but I get a error when i try to flash a pda file. ( I guess I get that error because im downgrading the software???) Anyway can someone point me in the right direction so i can download firmware where I do not get a error.
Also I am using odin 3.07
Click to expand...
Click to collapse
What bootloader is on your phone? If you don't know, boot into download mode and look for a reference to warranty bit. If you see something about warranty bit, that means you have at least a 4.3 bootloader and you can't flash a stock ROM unless the ROM was compiled for flashing in Odin.
If you have at least the 4.3 bootloader, I suggest flashing Philz Touch custom recovery via Odin. Copy a CM10.2 or early CM11 ROM onto an external SD card, boot into recovery, and flash the ROM. This will at least get you phone running to determine exactly which bootloader and baseband are on your phone.
I'm not sure what bootloader I was on, I think it was mjb software . I assume I was on the latest and I tried to flash a previous version and now my phone is hard bricked. I bought a jig on eBay and it should come early this week. I guess what my next question is, is if I can get into download mode using the jig, what software would I need to flash using Odin 3.09.
Sorry I'm kinda new to Odin and the gs3 flashinng so I'm not familiar with it (I also have a nexus 5 so I'm used to using fastboot). Could someone post what files I need to get my gs3 back in order assuming I can get into download mode?
Thank you for all of your help, it sucks having a bricked phone and not really knowing how to fix it.
Does your phone turn on at all? If not, a jig probably won't help.
It does but doesnt turn on. When i hold the power button nothing happens and it does not vibrate. But when i plug it into the computer the usb sound goes off and the red led comes on (Charging phone LED). Do you think a jig will help?
When you connect the phone, what does it say in device manager? Of it says something like qusb load, it may be hard bricked.
audit13 said:
When you connect the phone, what does it say in device manager? Of it says something like qusb load, it may be hard bricked.
Click to expand...
Click to collapse
When i plug it into the computer it shows up as "Qualcomm HS-USB QDLoader 9008 (COM7)"
Does that mean im screwed? Is there anything I can do?
Since the phone will not go into download or recovery, you may have to have it jtagged. Before doing that, did you try to de-brick it?
This may help too: http://forum.xda-developers.com/showthread.php?t=2549068
Here is the PIT for Android Version 4.4.2
nsnobel2 said:
Hi,
I just brick my i747 and after use debrick image of 4.4.2 my phone alive but problem is phone do not boot without sd card, someone suggest me to flash first I747UCUFNE4 4.4.2 bootloader file along with pit file , later install 4.4.2, so I dont have these fiels, really appreciate if someone help in this issue, thanks br
Click to expand...
Click to collapse
4shared.com PIT_16GB_I747UCUFNE4_ATT_Andro id_4_4_2
What d'you mean?
01manu said:
4shared.com PIT_16GB_I747UCUFNE4_ATT_Andro id_4_4_2
Click to expand...
Click to collapse
D'you mean to search 4shared.com for "PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2"?
pit samsung att android 4.4.2
LeDroidDummy said:
D'you mean to search 4shared.com for "PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2"?
Click to expand...
Click to collapse
yes and writeme to [email protected] for the passwd o for the file and passwd
Thanks but...
01manu said:
yes and writeme to [email protected] for the passwd o for the file and passwd
Click to expand...
Click to collapse
Thanks 01manu, but when I search for that, there's a lot of results. Which one is it? (4shared{dot}com /web/q/#query=PIT_16GB_I747UCUFNE4_ATT_Android_4_4_2)
Here, try this.
https://forum.xda-developers.com/showthread.php?t=1848264
That should be the PIT file you need.
Hi
I managed to brick my T800. I have twrp but I can't get into recovery mode. I can get into down load mode, though. So I'm trying to flash a rom with Odin but down load from sammobile is taking forever. I'm afraid the logo will burn in. (I can't turn it off either, it wants to reboot)
Is there done place else where I can get a rom I can flash with Odin?
Thanks
barth2 said:
Hi
I managed to brick my T800. I have twrp but I can't get into recovery mode. I can get into down load mode, though. So I'm trying to flash a rom with Odin but down load from sammobile is taking forever. I'm afraid the logo will burn in. (I can't turn it off either, it wants to reboot)
Is there done place else where I can get a rom I can flash with Odin?
Thanks
Click to expand...
Click to collapse
Found it here in the Android Development forum
http://forum.xda-developers.com/showthread.php?t=2800372
Thank you. Back in business
barth2 said:
Thank you. Back in business
Click to expand...
Click to collapse
Good to hear
kevman8396 said:
Found it here in the Android Development forum
http://forum.xda-developers.com/showthread.php?t=2800372
Click to expand...
Click to collapse
Thanks for your help in the location of the firmware, just bricked my Tab and currently working to restore all.
Here's my thread if you guys need a fast server. The firmwares in my thread come straight from sammobile and uploaded to mega. http://forum.xda-developers.com/showthread.php?t=2934279