Hello, since I upgrade my Galaxy Nexus ( maguro ) to Android 4.3, I can't flash any kernel. When I boot, there are a lot of force close of PhoneUI, and my phone turns off. When I try to restart, he is locked on the bootanimation.
Things I tried :
-Wipe data + Flash Rom and gapps + boot + Flash kernel
-Come back to 4.2.2 ( same problem, even though I try to flash a 4.2.2 kernel )
-Flash the Factory Image in 4.2.2 and 4.3
What can I do ? Please help me, I'm desperate
( Sorry for my bad english, I'm french )
Try doing a full wipe, install ROM/GApps, boot, reboot, then kernel. My routine typically goes:
Wipe cache, Dalvik, system, and data.
Flash ROM
Flash GApps
Reboot phone
Once phone is booted again reboot to recovery
Wipe cache and Dalvik
Flash kernel
Reboot and done.
Never had a single problem doing it this way. May be a few unnecessary steps, but I don't mind as it's only a couple minutes at most.
Related
i have a unlocked & rooted galaxy nexus....i flash the rom open kang build 22 & flash the gapps 4.0.4 after i rebooted. i stocked in bootanimation & hang up & appear the google logo, always like that...cannot start.....HELP please....
Wipe and reflash the ROM then Gapps, then boot.
Did you do a full wipe. Wipe factory/data, cache partition and in the advanced menu wipe dalvik cache. Then flash rom and gapps
After you flash the rom, wipe data,cache,dalvik and flash gapps. You cant just flash rom than the 4.0.4 gapps you will get the bootloop.
i already do full wipe & still the same problem?
1. Wipe data
2. Wipe cache
3. Wipe dalvik cache
4. Flash ROM
5. Flash Gapps
6. Reboot
krisjuls said:
i already do full wipe & still the same problem?
Click to expand...
Click to collapse
In addition to doing what Eddy says, re-download the rom and Gapps.
Thanks for reply but still the same problem
charlieb620 said:
After you flash the rom, wipe data,cache,dalvik and flash gapps. You cant just flash rom than the 4.0.4 gapps you will get the bootloop.
Click to expand...
Click to collapse
I always flash like that never have a problem. Never reflash after flash. Try to flash another ROM OP to see if it was the ROM or not.
Sent from my Galaxy Nexus using Tapatalk
i install other rom foxhound ang still the same problem
i choose the show log it says rm: can't remove '/data/dalvik-cache':no such file or directory....rm:can't remove '/cache/dalvik-cache:no such file or directory.....rm: can't remove '/sd-ext/dalvik-cache': no such file or deirectory
Thanks guys for all ur reply & time.......i already done all...its ok now, i use the wugfresh to flash stock & unroot and unlock & unroot again.Again Many Thanks
Hi All,
Seem to have a slight problem with flashing Custom Roms onto my GNex at the moment. Not too sure what's causing it to freeze when booting up. All I get is the X logo and will stay there until the battery dies.
I'm able to revert back to a Google rom and regain use of my phone. Just can't seem to flash any custom roms at all. It's happened with CM10.1, CM10, XenonHD Stable-2.0, Minoco.
I've attempted to flash with CWM and TWRP. Both get the same results. Prior to flashing I've whiped both the Cache and Davlik.
I have previously used CM9 and older versions of Minoco on this device. So seems odd that this is happening now.
Any advise or ideas towards what I should look at would be appreciated.
Thanks,
Drav
you have wipe data before flashing different roms... dirty flashing(only wipe cahce and dalvik) is only if you are updating the same rom.. this is how i normally flash ALL roms
1. wipe data/factory reset
2. wipe system
3. wipe cache
4. wipe dalvik cache
5. flash rom
6. flash gapps
7. reboot
8. wait 10 mins then do another reboot
9. enjoy
PS- the 10 min wait and reboot is soemthing i do that IMO lets the new rom settle
Thanks k786,
It's booted up in a custom rom now after following those step by step. Much appreciated! :good:
Cheers,
Drav
I was trying to install JB X4 ROM and the battery ran out. Now when I tried to install again from CWRM, it freezes on wiping the cache n says cannot format cache and freezes and the little android icon is lying down with its stomach open!!! Any ideas what to DO??? PLEASE HELP. I think my phone is bricked now
Why you not use TWRP: http://www.teamw.in/project/twrp2
Or CWM Lastest version: http://forum.xda-developers.com/showthread.php?t=2240607
When you try to flash new rom your bettery must over 75% (recommended 100%). Try use ODIN to flash lastest & fresh recovery above.
If u still want to use CWM you need:
- Fresh rom (support ur device)
- ODIN for flash new recovery (your own recovery have problem?)
- wipe data + wipe cache + wipe devil (need for new rom)
- Install new rom with zip file (from ur sdcard)
if you download lastest version of any recovery mod above, you don't need use others.(exp: darkside super wipe,...) Try out me way, you can flash new rom easily
So, I'm using a T-Mobil T-989 currently running a really old CM 9.1.0 with the UVLI4 radio. I'm using Clockwork Mod.
I'd REALLY like to upgrade to CM11, but I'm getting hung on the damn radio upgrade.
I've got the UVMC6 update, but I can't seem to get it to install.
I've tried:
Straight install.
Straight install, wipe cache, wipe Davik
Wipe cache, wipe Davik, install.
Wipe cache, wipe Davik, install, wipe cache, wipe Davik
Full wipe/system restore, wipe cache, wipe Davik, install.
Full wipe/system restore, wipe cache, wipe Davik, install, wip cache, wipe Davik
Each time, I get exactly the same result: It sits there at the spinning-circle CM booting screen. I've left it for 5 minutes and it just doesn't get any farther.
What am I missing?
Pretty sure an old cm won't boot with the new radio installed.
Your easiest bet would be to Odin flash stock 4.1.2. That will put you on jelly bean with the new radio. Then install custom recovery (at least twrp 2.6.1.0) and root.
Then install your rom.
kj2112 said:
Pretty sure an old cm won't boot with the new radio installed.
Your easiest bet would be to Odin flash stock 4.1.2. That will put you on jelly bean with the new radio. Then install custom recovery (at least twrp 2.6.1.0) and root.
Then install your rom.
Click to expand...
Click to collapse
So the procedure should be:
Plug in USB.
Reboot into USB-recovery (Holding both volume buttons)
Load Odin3 v3.09
Use Odin to load T-Mobile firmware 4.1.2 using the T989UVMC6_T989TMBMC6_TMB.zip that I got. (I found the how-to for doing that.)
Install TWRP
Use Kies to Root
Use TWRP to install CM11 (using the typical wipe-everything-and-install method)
Am I missing anything?
I had a problem after installing Omega rom coz my device will freeze every 5-10 minutes and i had to manually reboot it.
Then i tried other several roms (stock 4.4.2 - Blacktox - Ditto DN3) all with the same problem..device keeps freeze.
Tried all recoveries (stock - Philz - TWRP - CWM) each with all possible versions but the same..
Tried a lot of kernels with the same problem
Bootloader is MJ5.
My old firmware was 4.1.1 which i had a backup of...n when i restore it goes as smoothly as it was before with no freezes.
Ive had all the wipes n resets possible (Wipe dalvik n cache cache partition n system n data n preload n factory reset n even zoots wipe script) but the same problem...but i had notice that after flashing the new rom n doing dalvik cache when i reboot a message appears (optimising 1 from 270 applications) which is strange i think..after full wipe n mega wipes n factory reset n zoots wipe script how come it recognizes the apps that were installed on the old rom !!??