I was trying to install JB X4 ROM and the battery ran out. Now when I tried to install again from CWRM, it freezes on wiping the cache n says cannot format cache and freezes and the little android icon is lying down with its stomach open!!! Any ideas what to DO??? PLEASE HELP. I think my phone is bricked now
Why you not use TWRP: http://www.teamw.in/project/twrp2
Or CWM Lastest version: http://forum.xda-developers.com/showthread.php?t=2240607
When you try to flash new rom your bettery must over 75% (recommended 100%). Try use ODIN to flash lastest & fresh recovery above.
If u still want to use CWM you need:
- Fresh rom (support ur device)
- ODIN for flash new recovery (your own recovery have problem?)
- wipe data + wipe cache + wipe devil (need for new rom)
- Install new rom with zip file (from ur sdcard)
if you download lastest version of any recovery mod above, you don't need use others.(exp: darkside super wipe,...) Try out me way, you can flash new rom easily
Related
i have a unlocked & rooted galaxy nexus....i flash the rom open kang build 22 & flash the gapps 4.0.4 after i rebooted. i stocked in bootanimation & hang up & appear the google logo, always like that...cannot start.....HELP please....
Wipe and reflash the ROM then Gapps, then boot.
Did you do a full wipe. Wipe factory/data, cache partition and in the advanced menu wipe dalvik cache. Then flash rom and gapps
After you flash the rom, wipe data,cache,dalvik and flash gapps. You cant just flash rom than the 4.0.4 gapps you will get the bootloop.
i already do full wipe & still the same problem?
1. Wipe data
2. Wipe cache
3. Wipe dalvik cache
4. Flash ROM
5. Flash Gapps
6. Reboot
krisjuls said:
i already do full wipe & still the same problem?
Click to expand...
Click to collapse
In addition to doing what Eddy says, re-download the rom and Gapps.
Thanks for reply but still the same problem
charlieb620 said:
After you flash the rom, wipe data,cache,dalvik and flash gapps. You cant just flash rom than the 4.0.4 gapps you will get the bootloop.
Click to expand...
Click to collapse
I always flash like that never have a problem. Never reflash after flash. Try to flash another ROM OP to see if it was the ROM or not.
Sent from my Galaxy Nexus using Tapatalk
i install other rom foxhound ang still the same problem
i choose the show log it says rm: can't remove '/data/dalvik-cache':no such file or directory....rm:can't remove '/cache/dalvik-cache:no such file or directory.....rm: can't remove '/sd-ext/dalvik-cache': no such file or deirectory
Thanks guys for all ur reply & time.......i already done all...its ok now, i use the wugfresh to flash stock & unroot and unlock & unroot again.Again Many Thanks
since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
1.first flash stock ddlk2
2.download the rom and flash it after :
(i) formatting system,data and cache
(ii) mounting all partitions
When done flashing,wipe data and reboot
davithdeathrider said:
since im new to xda i can not post on the main thread http://forum.xda-developers.com/showthread.php?t=2442977&page=12
so i had to create this one as a question, cause i have a problem installing this rom, i downloaded both the kernel and the rom from the main thread, i first flashed to stock rom with odin, then i followed every step to install the kernel and after the rom, but im stuck in boot loop and im kinda angry cause it seems like im the only one with that problem.
i tried to install the rom using white's 1.33 kernel instead of percy's kernel ( the one provided in the main thread) and then flashing the rom, and it kinda worked, because i didnt go in to boot loop, but neither wifi or bluetooth werent working.
pls help me!!! i really want to try this rom!
Click to expand...
Click to collapse
Try this method
#1-Flash stock rom using odin
#2-Go to cwm
#3-Mount all partitions
#4-Install CyanogenMod#2 kernel
#5-Back and go to Advance then REBOOT RECOVERY
#6-You are on cwm now and the fonts are small
#7-Go to mounts and Format system,data,cache
#8-Dont press back -Mount all partitions
#9-Install zip from sd card-choose zip then choose The Rom
#10-When it is done flashing -Wipe Data - tHEN REBOOT
Do this.
1. Go to cwm recovery
2. Clear data and wipe cache
3. Go to advance :- wipe dalvik cache and battery states.
4. Go to mount & storage :- format system, data & cache.. dont format sd.
5. Then mount everything expect sd-ext.
6. Flash kernel.
7. Go to advance reboot recovery.
8. Again wipe data & cache.
9. go to advance and again wipe dalvik cache & battery states.
10. Mount everything expect sd-ext
This time you dont need to format system, data, or cache in mount.
11. Finally flash rom and reboot.
Hope it work.
Using optimus nexus me v5 on galaxy y
Hello, since I upgrade my Galaxy Nexus ( maguro ) to Android 4.3, I can't flash any kernel. When I boot, there are a lot of force close of PhoneUI, and my phone turns off. When I try to restart, he is locked on the bootanimation.
Things I tried :
-Wipe data + Flash Rom and gapps + boot + Flash kernel
-Come back to 4.2.2 ( same problem, even though I try to flash a 4.2.2 kernel )
-Flash the Factory Image in 4.2.2 and 4.3
What can I do ? Please help me, I'm desperate
( Sorry for my bad english, I'm french )
Try doing a full wipe, install ROM/GApps, boot, reboot, then kernel. My routine typically goes:
Wipe cache, Dalvik, system, and data.
Flash ROM
Flash GApps
Reboot phone
Once phone is booted again reboot to recovery
Wipe cache and Dalvik
Flash kernel
Reboot and done.
Never had a single problem doing it this way. May be a few unnecessary steps, but I don't mind as it's only a couple minutes at most.
DEVICE INFORMATION
C5303 SONY XPERIA HUASHAN
||AFTER WIPE SYSTEM,DALVIK,FORMAT SYSTEM,FORMAT DATA AND MEDIA , FORMAT DATA , FORMAT CACHE|| 3 TIMES
after flashing from sdcard The Pacman 4.4 For huashan released on 3/03/2014
bootloop at black screen after flashing Boot.img and the rom , i FLASHED OTHER KERNEL (To see if fix) AND FREEZE ON LOADING SCREEN
Its dont possible to use pacman 4.4 on huashan devices
ALL MY FRIENDS THAT TRIED , HAVE THE SAME PROBLEM
Sorry i cannot provide a logcat now, i dont have time
If u want to see the problem , install pacman 4.4 for You huashan device ...
Pls i need much 4.4.2 pacman ... i alredy use 4.3 for now but i like much the 4.4...
plss anyone have the solution?
Hmmm....i don't know if you follow this step but if you don't then try it...
1. Flash kernel inside the rom....
2. Boot into recovery....
3. Factory reset/full wipe....
4. wipe cache....
5. wipe dalvik cache....
6. in Mounts and Storage, format System, Data and Cache...
7. flash pac rom...
8. flash gapps....
9. boot into system....
if those above step didn't work then skip step 8 (flash rom only) then boot into system....after fully reboot then go back to recovery to flash gapps...
iPusak Gaoq™ said:
Hmmm....i don't know if you follow this step but if you don't then try it...
1. Flash kernel inside the rom....
2. Boot into recovery....
3. Factory reset/full wipe....
4. wipe cache....
5. wipe dalvik cache....
6. in Mounts and Storage, format System, Data and Cache...
7. flash pac rom...
8. flash gapps....
9. boot into system....
if those above step didn't work then skip step 8 (flash rom only) then boot into system....after fully reboot then go back to recovery to flash gapps...
Click to expand...
Click to collapse
how enter in recovery if black screen?
samuk190 said:
how enter in recovery if black screen?
Click to expand...
Click to collapse
take off the battery then put it back, turn on and go into recovery...
Hello,
I don't know why my lg g3 phone doesn't want boot on custom rom.
I have the LG G3 d855 model, 16gb memory and here are my procedure to install every custom rom :
1. Flash Stock ROM using LGUP (the version of the firmware is not important but the possibility to root is)
2. Install KingRoot and get root
3. Install AutoREC and enter to the recovery
8. Flash Recovery TWRP 3.1.0-2
9. Reboot to the new recovery
10. ADVANCED WIPE (wipe cache, dalvik cache, data and SYSTEM)
11. Flash baseband 21C
12. Flash CUSTOM rom
13. Wipe cache and dalvik cache
14. Flash Gapp
15. Wipe cache and dalvik cache
16. Reboot
I think I did nothing bad...
but the phone does not start and it stays at the initial logo screen (not the LG logo, but the custom rom logo). I waited over 10 minutes to boot but nothing. Even though I install the identical rom again or install an anoter rom, each time the same issue.
This happens with all custom rom (xenonhd, resurrection remix, and now lineageOS)
I can use and boot on stock rom but each time I want to install a custom rom, my phone doesn't want to boot. The phone display stays at the initial rom logo screen.
It seems that I am alone to have this problem.
I don't know why and I search everywhere to find out the solution...
PS : My phone never restart by itself. I never have bootloop with my phone when I using stock rom and same with custom rom..
The problem is the boot with a custom rom. The phone don't want to boot and stay on logo loading...
Any suggestion may be help.
Thank you.
1. Once you installed TWRP you don't have to go back to stock to switch roms. From then on you can just download zips and flash them.
2. You need to delete everything (including system) except internal and external storage ( so you can still flash the zip for xceed, otherwise you will delete it). Remember that you will lose all your apps including your data with it. You can backup them with titanium backup tho. Pictures and video's will still be there as they are stored on the internal or external storage.
3. You also need to flash the GAPPS package after flashing rom, for xceed (7.1.1), pick nano (ARM)
4. Wipe cache and dalvik after flashing and reboot.
5. Make a backup before you do so !!!!!!
Good luck.
Jornwitt said:
1. Once you installed TWRP you don't have to go back to stock to switch roms. From then on you can just download zips and flash them.
2. You need to delete everything (including system) except internal and external storage ( so you can still flash the zip for xceed, otherwise you will delete it). Remember that you will lose all your apps including your data with it. You can backup them with titanium backup tho. Pictures and video's will still be there as they are stored on the internal or external storage.
3. You also need to flash the GAPPS package after flashing rom, for xceed (7.1.1), pick nano (ARM)
4. Wipe cache and dalvik after flashing and reboot.
5. Make a backup before you do so !!!!!!
Good luck.
Click to expand...
Click to collapse
Hello,
1. I think that but with specific rom, some people tell us to flash stock rom before flashing a custom rom. eMMC bug related ?
2. Deleting the system changes nothing because the system is wiped when I flash the rom, right ?
3. if the rom boot first then I will install Gapps. Else, I don’t install because the rom doesn’t want to boot.
1. Well .. I've been switching between fulmics,xceed,rr, .. etc without any problem so no, there is no need to go back to stock everytime.
2. Try it, you won't be able to boot until you flash a new rom, but it could help. That's why you take a backup in the first place. It is more 'clean' and if you don't try it you won't know.
3. Sometimes you have to flash gapps directly after the rom or you will be in for a bad time if you do afterwards.
Once you have TWRP recovery installed it's the easiest thing ever to flash a new rom. Make sure your zip files are downloaded okay. Download the MD3 to check it. Try to download via MEGA app or so, because browsers downloads tend to have errors sometimes.
Apart from that. Don't root via kingroot. They have had some suspicious cases where malware was installed on the phone when rooting.
If nothing's works. Go back to full stock through KDZ, root wit your PC, install TWRP via autorec, go to recovery, wipe everything, install modem 21C, install rom and gapps, wipe cache, reboot. Don't try anything other than that.
I have the same problem
Jornwitt said:
1. Well .. I've been switching between fulmics,xceed,rr, .. etc without any problem so no, there is no need to go back to stock everytime.
2. Try it, you won't be able to boot until you flash a new rom, but it could help. That's why you take a backup in the first place. It is more 'clean' and if you don't try it you won't know.
3. Sometimes you have to flash gapps directly after the rom or you will be in for a bad time if you do afterwards.
Once you have TWRP recovery installed it's the easiest thing ever to flash a new rom. Make sure your zip files are downloaded okay. Download the MD3 to check it. Try to download via MEGA app or so, because browsers downloads tend to have errors sometimes.
Apart from that. Don't root via kingroot. They have had some suspicious cases where malware was installed on the phone when rooting.
If nothing's works. Go back to full stock through KDZ, root wit your PC, install TWRP via autorec, go to recovery, wipe everything, install modem 21C, install rom and gapps, wipe cache, reboot. Don't try anything other than that.
Click to expand...
Click to collapse
Hello,
I have a question.
Can you give me a gapp 100% compatible with all custom rom with android 7.1.2, because i think opengapp are not reliable. Maybe the gapp will cause my issue and the rom won't boot.
Can i use this one https://forum.xda-developers.com/on...isited-slim-gapps-6-0-7-0-unofficial-t3462088 ?
I always use PICO version of gapp
Thank