Related
There is nearly only 3 types of cases out at the market.
First the hard plastic cases that are coming in 2 parts. There are the glossy ones and the trubberized ones in a wide variety of colors and styles at ebay or Amazon. The quality is OK but not perfect. What I like is the good protection in combination with the acceptable increase of size. The problem is that you nearly can't remove the front part of the case without breaking the very small bars fixing the case to the device. I like the rubberized ones most. They are looking more stable to me than the glossy ones. With the case it's more difficult to slide out the QWERTY keyboard. But it's acceptable. What I like very much is the protection of the on/off button and then loudness buttons. Because without the case I öfter press these keys withooany will.
Then there are the leather cases. There are horizontal and vertical ones. I tried to use the ones for the Samsung Galaxy S2 also, they fit. But of course not together with the hard plastic case together. For that I will try cases made for the HTC Sensation XL. I will share my experiences as soon as I get the cases.
The third category are cases that are blocking the hardware keyboard. That unacceptable for me. I tried rubber cases for the Samsung Galaxy S2 and it worked for one but the fitting is not not really good. The thickness of the device is quite different from most other smartphones.
Hope I could help a little bit and will share my upcoming experiences.
Thanks for checking out the cases, did they the leather/rubber ones block the camera at the back or did it have the correct position for the opening?
The leather ones I tried are for pulling out the device before use.
The rubber one I tried had a big camera hole on the back. But I forgot to check the other connector holes but if I remember correctly some cutting work has to be done. But this is possible with the right tools. Sharp knives and hole cutters for leather/paper.
Best thing is to try the case at a shop. Surely some fits better than others. But I think the Galaxy S2 category is the best you can get. The Galaxy Note ones could be also work, because it's taller but thinner.
The first category cases are made for the device and aren't blocking anything.
I wonder if anyone has tried the one-piece Speck cases yet (can't post links yet, but a Google search for "speck captivate glide" should bring up the page on Speck's site). They look good, but I'm curious if they restrict the sliding mechanism or block the keyboard at all.
fatxdad said:
(edited for brevity)
Click to expand...
Click to collapse
Just wanted to share my review, got a hard rubberized case on Amazon from ezbuy123. It's a 2-piece, snap-on. In the past, I've used Otterbox on EVERYTHING, but since they dont have an i927 case out yet, I figured I'd take a chance. The build quality is probably a 3.5/5 - it's hard, it's plastic, it's rubberized, that all is true. The edges of the case around the keyboard area are already starting to get chewed up, and the rubberizing doesnt have any real texture to speak of, I feel like I'm going to drop it when I use it. On the plus side, it isnt a weird neon color, and it doesnt add much bulk or weight to the phone.... All in all, I'd be pressed to give it 4/5 overall, it will definitely be replaced with an Otterbox if they ever decide to make a case for the i927.
Speck Sureslider Case
So I just received the Sureslider case today. I bought it for 24 dollars (from versiomobile before they charged 35 ).
Here's my review on it:
It's a one piece piece that has a hard plastic back with polycarbonate. On the front, it's made up of TPE (thermoplastic elastomer). The TPE gives the case a lip from the screen of the phone. It still slides when you put it on its face but not by much. Only the top part actually clips onto the phone. The back plate just kinda sticks to the phone.. somewhat. There's basically no restriction when you're sliding it, it feels like it's not even there. Regarding the top keys of the qwerty keyboard, it might've moved a nanometer, but not to significant to affect your typing.
Honestly, I don't think the price of $35 is worth it. I'd say it'd be more fair around 13 dollars. It also comes with a one-year warranty, so maybe that's where the high price came from?
The Sureslider case is technically a "one-piece" but when I got it, somehow the connection between the bottom and top part became loose and the top part came out. Needless to say, i thought it was going to be an easy fix. It wasn't . You can't just "slide" it into one piece since there's a hook and a little clip at the bottom to provide stability. After I managed to get the piece together, I went through the packaging, and there was this small instruction slip. It said "If the case becomes separated by mistake, align the two pieces and fit back together."
If you have any questions, feel free to ask.
I got the rubberized texture case from ebay (shop4phree*). 5 bucks included shipping. Just to get something on the phone quick before I scractched it. I have to say for being so cheap it has help up surprisingly well. I was going to go for a higher end case at a later time but it's now going on 2 months and I haven't felt the need to switch. The only drawbacks I can see is it interferes with the smoothness of the slide out keyboard (requires a little more finger power to push it up) and the extra bulk it adds makes your top row of keys a little tight when typing(especially with big fingers).Ive dropped my phone a couple of times and it has held intact.
Im a cheap bastard so my $5 case works great for me.
Amzer cases
Well i managed to snap the feelers on my first case (the black rubberized one), so I've moved on to an Amzer case from Amazon. It's a 2-piece, snap-together advertised as "one piece". The build quality is probably a 3/5 - it's hard, it's plastic, it's rubberized on the back half, but the front half is clear hard-poly that looks awful (definitely not at all like what the pic on Amazon makes it look). It doesnt add much bulk or weight to the phone, but it is slightly bulkier than the previous case I reviewed. Hopefully Otterbox will come up with a case for the i927 soon, I'm quickly tiring of these cases...
L4T
http://www.daydeal.com/home.php?cat=6439
Haven't tried any of them but their stuff is good.
Body Glove Captivate Glide
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Does anyone know of a otterbox case from another phone that would fit this one for protection? (commuter or defender)
And what about silicone cases? Soft ones I mean..
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Mom is with ATT so she picked the Captivate Glide cuz I have Epic. LoL Basically, she also want a slide-out keyboard.
I ordered this for her on eBay.
http://www.daydeal.com/product.php?productid=64678
One problem, the sellers posted different quality. Some say hard plastic and some say rubberized. I went with a seller that said rubberized with good reviews. $7 with free shipping. I'm waiting on that to arrive and see how it feels
Just a question, since I'm not a native english speaker:
what does 'rubberized' mean? Does the term refer to a hard case with soft grip or to a flexible silicone-like case that you can even bend and it keeps the shape?
Thanks
clpo13 said:
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Click to expand...
Click to collapse
I got the same one from AT&T.
I agree with your comments. This case is much better quality than the no-name clear ones I've seen elsewhere. It is a pain to install / remove, but I like it tight, lol. I've had cases for other phones where it comes off easy, and they become a pain in the @ss.
They are the most expensive I've seen, but worth the price if it saves your phone from just one concrete ground fall.
-Am
hard case with soft grip
or you can call it a "grippy" hard case
rafeee2 said:
hard case with soft grip
or you can call it a "grippy" hard case
Click to expand...
Click to collapse
Thank you
just ordered the 3 in 1 combo case/holster for about $18 with free shipping...hoping its worth the money, i like the idea of the holster but i have a feeling the case and holster will be made out of cheap plastic....
rafeee2 said:
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Click to expand...
Click to collapse
in their official site i cant find anything about that case, strange.
Didn't see a review for this case up here yet, so thought I'd make one.
I saw this case on Amazon (http://www.amazon.co.uk/dp/B008E9T442/ref=pe_217191_31005151_dp_1) and it had mostly good reviews, so went ahead and ordered one, paying £7.95 + shipping
What I like -
Extra bulk/weight (or lack thereof) - Looking at the images of the case on Amazon I had suspicions that this would add a lot of bulk and weight to the phone, especially looking at the 'raised' sections on the inside front cover, used for when the cover is in 'stand' mode. Surprisingly, it does not really. Even though it covers your phone back and front, it does not feel bulky like some other cases do, and the raised sections on the inside front cover actually act as an extra bit of cushioning for the screen, giving a bit more protection from drops. The phone still fits nicely in my pocket and I can hardly tell the difference with or without the cover.
The Fit - The cover fits very nicely on my S3. The corner clips hold the phone snugly, but not so tightly that it is difficult to get the phone out of the cover if you want to.
The 'Feel' - The cover has a nice feel to it. It feels as if it's soft leather though it isn't (as far as I can tell), and it sits nicely in the hand. The way the case is slightly bigger than the phone adds 'protruding edges' that your fingers grip nicely on, and that means that you are less likely to let the phone slip from your hand.
Design / logos - The design of the case (imho) is quite nice and not at all flashy. I think Poetic have gone for a more 'functional' look than anything else. There is a Poetic logo on hte front of the case, but you hardly even notice it. One thing I was also concerned about when I first ordered was that the 'stand/hinge' on the back of the case would add an uneven 'lump' to the shape of the case. It does not. At all. Poetic did a great job of designing this case.
Integrated Stand - I bought myself one of these covers for my Nexus 7 and I really like the integrated stand. It's really handy when I put my tablet on charge in landscape and watch videos, read, browse web etc. The only issue I have with that case is that the 'corner clips' that you have to undo when you open the stand will probably wear over time. With the Poetic HardBack case, this is not a problem, as you do not have to unclip the corners holding the phone when you open the stand. When in stand mode, the case holds the phone at a great angle for you to use the phone for videos, reading, music etc. Obviously (like with any other stand / dock for landscape mode) you will not have access to the volume buttons when the case is open in stand mode.
Operation - Opening and closing is simple enough, though can be a little fiddly when trying to do it one handed.
Compatiblity - It fits the phone perfectly and has spaces in all the right places allowing access to camers, flash, speaker, microphone, headphone jack, volume, power etc.
Build Quality - It looks like a well made case, with clean, even stitching and no edges protruding where they shouldn't. Backed by a three year manufacturer's warranty, I will most likely get a new phone before I need to buy a new cover.
What I don't like - Nothing
Please look on the Amazon link above for pictures of the case.
Stumbled upon this case and hadn't seen it mentioned in the forums here yet. I want something slim and pocketable, yet able to take a drop from waist height. This looks like the best thing I've found so far.
Due out mid-may according to the person I spoke with at the company. One thing she couldn't say for sure though was whether or not the power button was covered.
http://www.goballisticcase.com/products/htc-one-ballistic-aspira-series-case
The reason I asked her is if you look closely, you'll see a little bit of rubber sticking off the top... looks like a power button covering to me. What do you guys think? Anyone know more about this case, the company or seen a pre-production model? Maybe this is why it's been delayed* -- due to a mistake?
(See edited pics I attached below)
*Note: "Delayed" being my own personal interpretation as to why the case was not available at the launch of the new phone as most big case companies do nowadays.
The video at 0:29 shows the power button is covered. It could be that they will fix this like Poetic is.
On second look, I see that the video is a general one for their line and not for the One specifically.
Long813 said:
The video at 0:29 shows the power button is covered. It could be that they will fix this like Poetic is.
On second look, I see that the video is a general one for their line and not for the One specifically.
Click to expand...
Click to collapse
Yeah... I still am thinking along the same lines as what you were suggesting.
These cases are available now. Called and had a rep go find out that even though the picture looks like it's covered, that the IR functionality is not impaired. I'll report back if I get one.
its like you are carrying a soap on this case
ad78 said:
its like you are carrying a soap on this case
Click to expand...
Click to collapse
Find out in next week's exciting episode who I'll choose.... will it be, the slim yet protective answer... or the slimmest, most pocketable answer?
From the posts, comments and effort placed into details, information and thoughts people provide on these forums in general, we're all kinda part of a soap opera it seems. Makes sense, phones are a total love/hate relationship!
I can attest that Ballistic make some really good Cases. I had the Ballistic Smooth Case on my HTC One S and I loved it, it looked Stylish yet protective.
While the Ballistic Aspira looks good i still prefer the Smooth, too bad its not available for the HTC One.
That said, i would definitely give the Aspira a Try, the only thing that worries me is the hard plastic, looks scratchable...
Anyone tried this case out yet? I've got one on the way, looking for an ideal, attractive case with good protection all around (without being overkill and covering all the ports and adding unnecessary bulk). Not into the UAG case... hate the milspec/ruggedized styling.
I hope it looks like it does in the photo... has a very "Portal"-esque aesthetic to it
lol it does remind me of Portal as well.
But really, tbh... this looks far from slim and pocketable o_o
The UAG looks smaller than this.
Judging by reference dimensions and proportions, I figure the corners of the Aspira stick out a tiny bit more than otterbox Commuter, whereas the waists are a bit slimmer. UAG outside dimensions are about the same as Commuter, the real differences seem to be in how deep/thick the case is... UAG is the slimmest there, Commuter feels thick due to the rear and side profile, I expect the Aspira will feel better in that regard, even with the higher edges around the screen. Hopefully they don't get in the way of typing etc. I'd love to do a full side by side review with Commuter, Aspira, UAG with professional comparison and specific measurements, anyone got a UAG to send me?
ordered one, will report back in a few days...
jodeltje said:
ordered one, will report back in a few days...
Click to expand...
Click to collapse
Awesome, look forward to it. Very interested in comments regarding the lip around the screen and overall pocket-ability. Cause you can tell it would take a drop it better than a thin TPU or Seidio Surface.
Also make sure you take a photo of a very dark environment to engage the flash and let us know about any wash-out (if present). The design looks like it accounted for it in two ways by keeping the opening far away from the flash & lens + blacking out the rings around them.
Lauski said:
Also make sure you take a photo of a very dark environment to engage the flash and let us know about any wash-out (if present). The design looks like it accounted for it in two ways by keeping the opening far away from the flash & lens + blacking out the rings around them.
Click to expand...
Click to collapse
Will do
Ballistic Aspira = Great bloody case.
Wow, just arrived and got it on the phone, fantastic case! Quick first impressions review here, I'll make a real review thread soon as I can, this case deserves the attention.
-The case feels much, much slimmer than my otterbox Commuter, comparing the depth (thickness) and width of the cases the Aspira is a hair smaller in both dimensions, but it FEELS much smaller due to the superior ergonomic contours and curvyness. This is the exact criteria I was hoping for with this case, I'm a product design engineer myself and love good simple, ergonomics above all, favouring natural curves to fit the hand. Very impressed with the case in that regard, the glossy white back with grippy forward edges handles extremely well and much less likely to slip from my hand than my Commuter case.
-Built quality is fantastic, the plastics used are top quality with perfect finish, the overmolded one-piece design is right on the money, and the blends where the two materials meet are very precise and no hanging burrs, overlaps etc. Cutouts couldn't be better... they look fantastic and the size and placement is bang on. Nothing in the way of the power button IR blaster, no issue using 90 degree headphone connector, best looking camera cutout I've seen. To top that all off, the volume rockers function perfectly, a clear step up in function and feel from the Commuters which are too stiff, and there are no slots or cutouts around the rocker to let dirt in. Also, the Ballistic text logo molded into the one side looks really bloody clean... I dig it.
-Lip around the screen is about 3mm height, same as the Commuter. does not interfere with typing or swyping near the outside of the keyboard. the lip is raised the slightest bit in the four corners, adding some extra bounce protection there and does not get in the way, additionally it means when laying the phone face down, it's standing up the littlest bit on those corners, which I really like.
-Criticisms: don't have any yet... which is fantastic as I'm a severely picky perfectionist. initial impressions is top score in appearance, handling, and build quality... I don't think this case could be made any thinner without sacrificing protection, I feel it offers an excellent level of protection especially if combined with a glass screen protector.
Durability test will come throughout the week, I keep my phone in coveralls pocket all the time and work in a busy machine shop, my phone does get dropped from time to time and usually gets dirty with aluminum dust, coolant residue, etc from handling. the HTC One tends to pick up tiny steel filings around the speakers (magnets yo), the commuter was a PITA with this cause I had to take the case off the phone to clear them away... this case has just the right bit of flex around the speaker grills so it should allow me to wipe them away with the case on. Will report end of the week, and do a photo test with flash in the dark to check for reflection in the cutout.
Also I will get photos of it on the phone! it really looks fantastic :good::good:
Can anybody comment on how this case will fit into Slim (not skinny) jeans? Does the silicone part catch in pockets? Does it not wrap properly in some places? I had a ballistic for GS2 until I realized that thing was a tank and only needed a TPU case.
Also, the back is just polished polycarbonate as opposed to the Aspira's big bro, the GS, which has a TPU back that is virtually unscratchable. That's closer to what I had for the GS2. Can anybody tell us if the back is prone to scratches?
I'll give you detailed field report in a few days time, I keep my phone in jeans pocket usually and always taking it out to browse on transit, two hours a day, plus shop time. Should have an idea about scratch resistance and pocketability by Friday
Ps, did some low light flash photo tests, no signs of whiteout/reflective effects from camera/flash cutout.
ApoC_101 said:
Wow, just arrived and got it on the phone, fantastic case! Quick first impressions review here, I'll make a real review thread soon as I can, this case deserves the attention.
-The case feels much, much slimmer than my otterbox Commuter, comparing the depth (thickness) and width of the cases the Aspira is a hair smaller in both dimensions, but it FEELS much smaller due to the superior ergonomic contours and curvyness. This is the exact criteria I was hoping for with this case, I'm a product design engineer myself and love good simple, ergonomics above all, favouring natural curves to fit the hand. Very impressed with the case in that regard, the glossy white back with grippy forward edges handles extremely well and much less likely to slip from my hand than my Commuter case.
-Built quality is fantastic, the plastics used are top quality with perfect finish, the overmolded one-piece design is right on the money, and the blends where the two materials meet are very precise and no hanging burrs, overlaps etc. Cutouts couldn't be better... they look fantastic and the size and placement is bang on. Nothing in the way of the power button IR blaster, no issue using 90 degree headphone connector, best looking camera cutout I've seen. To top that all off, the volume rockers function perfectly, a clear step up in function and feel from the Commuters which are too stiff, and there are no slots or cutouts around the rocker to let dirt in. Also, the Ballistic text logo molded into the one side looks really bloody clean... I dig it.
-Lip around the screen is about 3mm height, same as the Commuter. does not interfere with typing or swyping near the outside of the keyboard. the lip is raised the slightest bit in the four corners, adding some extra bounce protection there and does not get in the way, additionally it means when laying the phone face down, it's standing up the littlest bit on those corners, which I really like.
-Criticisms: don't have any yet... which is fantastic as I'm a severely picky perfectionist. initial impressions is top score in appearance, handling, and build quality... I don't think this case could be made any thinner without sacrificing protection, I feel it offers an excellent level of protection especially if combined with a glass screen protector.
Durability test will come throughout the week, I keep my phone in coveralls pocket all the time and work in a busy machine shop, my phone does get dropped from time to time and usually gets dirty with aluminum dust, coolant residue, etc from handling. the HTC One tends to pick up tiny steel filings around the speakers (magnets yo), the commuter was a PITA with this cause I had to take the case off the phone to clear them away... this case has just the right bit of flex around the speaker grills so it should allow me to wipe them away with the case on. Will report end of the week, and do a photo test with flash in the dark to check for reflection in the cutout.
Also I will get photos of it on the phone! it really looks fantastic :good::good:
Click to expand...
Click to collapse
Thanks for the first impressions!, I'm glad that mine is on the way! . Looking forward for the pics ! Cheers
Just a little mid week update: case has totally grown on me, it's been perfect for me so far. Been working on a batch of small aluminum parts at work with machining and polishing, made sure to handle the phone plenty with my dirty hands.. dirt will barely stick to the glossy back, and wipes off easily. It will stick to the silicone but it wipes off that too. So far it's great for dirty job! Someone asked about or mentioned case materials of other ballistic cases, I believe the base material of this case is PA or PV based, most likely acrylic based. It's a super fine gloss finish in a solid milk white colour, with just enough flexibility to get on the phone. Poly-Acrylic makes sense since it feels great but also keeps enough tack for good handling, and depending on the blend and curing it can have excellent scratch and abrasion resistance, which this case appears to have. It should also exhibit good UV and sunlight resistance, as not to embrittle and change colour over time, which TPU can do. The lining material of the case is a silicone type rubberized plastic, it has a good solid cure and shouldn't shred like the softer durometer grades like some otter cases tend to do.
Off topic but funny cause of the irony, those aluminum parts I'm working on are fiber optic parts for the bad guys (Samsung). I believe Intel uses them too. I actually have no idea what they are for.
I just got this case today (gift from my boss who got it from out Ballistic rep). Having had it on for a few hours, I can tell you that it feels good , even though it's a little slick, not too thick, not as thick as an Otterbox Commuter. The power button is open, all the openings are where they're supposed to be. Seems like a good case
I just got mine in today and I really like this case! I have a zillion different cases and this one seems to give me the best of everything I want. I was using Case-Mate tough case before which I really like too.
Sent from my HTC One with hi-fi stereo and the Now Network.
Just wanted to do a review of some cases I bought and tried recently for my LGOG, hoping the info would be useful to other people. There are some other good and cheap options available online, but these are the ones I tried first-hand. I am really happy with all three of them, so here's the proof that sometimes you get more than you pay for...
First, a generic sleeve picked up at a local dollar store while I was waiting for my Amazon order to arrive. For just $2, it's pretty much as good as free. Simple, but ingenious: two pieces of synthetic leather (it's high quality, smooth, soft, and doesn't stink) stitched together, but with an added pullout ribbon that is surprisingly convenient, and works wonderfully to get the phone out. My wife was quite amused by the way it worked (as was I ). Sized perfectly for my phone, and looks pretty nice and elegant, too. Excellent basic protection sleeve, considering the price. Highly recommended, if you prefer your phone naked, but still want reasonable protection carrying it around. Five stars from me!
Next comes the Diztronic case, ordered from Amazon. It's a low-profile TPU wrap-around skin that looks and works much better than it costs. Very nice soft touch finish, clean design with precise cutouts, sharp looks and enough protection for daily use. The fit is perfect, feels like this phone was born in it. Some people on Amazon complain that it peels the screen protector at the edges due to a tight fit, but I don't use screen protectors, so I don't care. Adds very little bulk, but gives a nice protection around the bezel, so you can safely lay your phone face down. It also levels the protruding camera lens cover on the back, so it doesn't get scratched easily. One thing that seems weird at first is that the design around the volume and power buttons is very different. But then I realized how much it actually helps -- the power is recessed deeply in the cutout, making it much less prone to accidental presses, while still easily reachable with a fingertip. Very convenient. It would be nice to have a better grip on the sides (like a diamond pattern or something), but even as is, this case still makes the phone much less slippery than naked. And I didn't like the prominent logo on the back, as I prefer all my things with as little branding as possible (ideally, none, but that's just wishful thinking). Four stars (minus one for the grip and the logo).
The last one is a cheap dual-layer case pretending to be an OtterBox, also from Amazon. I saw this case there under different brands; mine was Aimo. I used OtterBox cases in the past, and to be honest, this one is quite impressive in comparison. Pretty much the same design features (except the port covers), build quality and the level of protection as Commuter series, but for just a small fraction of a price. And it has a handy folding stand on the back, which works in both portrait and landscape. If you are reeeally nitpicky, you might find the fit between the inner silicone layer and the outer hard shell a tiny bit loose along the top and bottom edges, but hey, it's not exactly an OtterBox, OK? Again, you really have to look hard and close to notice this. All the cutouts are precise, and the buttons are nice and light to the touch. Note that this case is quite bulky, and doesn't match the design style of the phone itself, so some people may not like it for its aesthetics. But as far as protection goes, this is probably the best option for this kind of money. This case is available in different colour combinations. Nothing beats black for me, but you can get yours in neon pink, if you want. Five stars, hands down!
Thanks for these suggestions and pics.
My first case for OG was Nilkins hard plastic case - at first it may look good, but actually is a piece of you know what. The rubber layer on the case started to peel off after 2 weeks first on the corners then the rest, due to this the phone looked ugly. After a while corners just broke off completely. All this happened with regular use without any extremes.
The next one I bought was a bit cheaper also from China - TPU X Type soft silicon I guess. I've been using it for many months now and it havent changed a bit. Good protection, looks nice and I guess it wont change forever unless you cut it with scissors
So yes, cheap can be good, but buyer beware as some cheap cases will be a headache.
I have this one:
aliexpress: /item/Genuine-Brand-New-IMAK-Crystal-series-PC-Ultra-thin-Hard-Skin-Case-Cover-Back-For-LG/1027800082.html
Phone looks nice in it. The plastic is sturdy, but it scratches easily. However it's a cheap one so no risk in trying it.
And the classic one gel case:
aliexpress: /item/Hot-Sale-8Colors-S-Curve-Line-Shape-High-Quality-Soft-TPU-Rubber-Wave-Gel-Soft-Skin/1310173671.html[/url]
This offers complete protection, but it's ugly.
PS: Just copy rest of URL after aliexpress.com to see it. I'm not allowed to post links.
First case I got was this: http://www.ebay.com.au/itm/QuickSan...lePhoneAccessories&hash=item3f25597db6&_uhb=1
It still works great to this day, but peeled the screen protector off.
I have had many E975 cases, flip ones, rubber and hard ones.
Currently I am using the LgOg official bumper and it is a dream, sometimes the holes are tight but I simply file them and they work fine
The bumper: http://www.ebay.com.au/itm/181246366449?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I finally got my Voia CleanUP case from Voia.
Was really looking forward to this case, with the quick-open cover and the slick looks that were offered on the website: http://www.voia.co.kr/goods/view?no=362
However after using it for a while I'm extremely disappointed with it, and I feel the quick cover/quick open feature isn't all that useful and somewhat gimmicky. Here's a quick review.
General Notes:
- The transaction was quick and easy, even from Korea. Very nice job by Voia here.
- I've posted an album of the phone installed in the case here: http://imgur.com/a/rJSLJ
Pros:
- Very nice looking case, really like the "brushed metal" look on the front of it.
- Fairly slim, keeps the bulk of the phone down
- The Quick-Open feature is somewhat nice, but also a con. The case doesn't seem to utilize the second screen function any differently than without it, but turning the phone on and off with the flip of the cover is pretty cool. I guess.
- Phone fits snugly and easily in the case
Cons
- The quick-open flap doesn't stay closed, flush with the phone (see photos). This was the most frustrating part for me because it actually makes the phone kind of a pain to just pick up and use since you'll be fumbling with the partially opened cover.
- The Quick-cover feature to turn the phone off and on is pretty poorly implemented. Flipping the case closed to turn off the phone is actually quite nice. However turning it on, especially if you use fingerprints, is a pain. When I open the case I flip the cover all the way back behind the phone. However this completely blocks the fingerprint sensor. So instead you have to flip the case open half way with one hand and use your other hand to put in your fingerprint. I'm not too sure there is much Voia could have done here, but this makes the phone fairly inconvenient to use
- The corner bumpers are just hard plastic. While it offers better than no protection at all, any fall from even a marginally significant height will not be cushioned by the hard plastic. If you drop the phone on the left side where the spine of the cover is, there is absolutely no protection at all. If you're looking for good drop protection for your new V20, I wouldn't go with this
- The volume buttons.... this one doesn't make sense to me. When the case is closed the volume buttons are covered by the spine of the cover. You can still use them, but you have to sort of guess where they are. When the case is open they're, oddly enough, even harder to get to as the folded spine of the cover blocks your thumb from getting right to them. You'll see in the photos.
Overall for about $25 this case was a huge let down. It does more to make the phone inconvenient to use than convenient. I'm going to get in touch with Voia to see about getting a refund. Maybe somebody else will have a different experience.
I've got this case as well & have never been a huge fan of this style of case as it is,at least not for a daily driver:
All cases such as this seem to get in the way of usability one way or the other.
I use mine for those times when I leave the house & know I won't be using the phone much at all,the main benefit being while in-pocket,the front flap serves to protect the phone from other items in my pocket (keys/etc...).
It's a well-crafted case & I don't have the problem with the front flap staying partially open as you do (perhaps check that the phone is fully seated in the case,I had this problem at 1st).However,those looking for bullet-proof protection a la Otterbox should look elsewhere,as this style of case isn't built to withstand anything more than minor bumps/drops/etc....
I recommend this case for those that use this type of case,but,with reservations,as you noted regarding using the fingerprint scanner.
ZeppelinJ0 said:
I finally got my Voia CleanUP case from Voia.
Was really looking forward to this case, with the quick-open cover and the slick looks that were offered on the website: http://www.voia.co.kr/goods/view?no=362
However after using it for a while I'm extremely disappointed with it, and I feel the quick cover/quick open feature isn't all that useful and somewhat gimmicky. Here's a quick review.
General Notes:
- The transaction was quick and easy, even from Korea. Very nice job by Voia here.
- I've posted an album of the phone installed in the case here: http://imgur.com/a/rJSLJ
Pros:
- Very nice looking case, really like the "brushed metal" look on the front of it.
- Fairly slim, keeps the bulk of the phone down
- The Quick-Open feature is somewhat nice, but also a con. The case doesn't seem to utilize the second screen function any differently than without it, but turning the phone on and off with the flip of the cover is pretty cool. I guess.
- Phone fits snugly and easily in the case
Cons
- The quick-open flap doesn't stay closed, flush with the phone (see photos). This was the most frustrating part for me because it actually makes the phone kind of a pain to just pick up and use since you'll be fumbling with the partially opened cover.
- The Quick-cover feature to turn the phone off and on is pretty poorly implemented. Flipping the case closed to turn off the phone is actually quite nice. However turning it on, especially if you use fingerprints, is a pain. When I open the case I flip the cover all the way back behind the phone. However this completely blocks the fingerprint sensor. So instead you have to flip the case open half way with one hand and use your other hand to put in your fingerprint. I'm not too sure there is much Voia could have done here, but this makes the phone fairly inconvenient to use
- The corner bumpers are just hard plastic. While it offers better than no protection at all, any fall from even a marginally significant height will not be cushioned by the hard plastic. If you drop the phone on the left side where the spine of the cover is, there is absolutely no protection at all. If you're looking for good drop protection for your new V20, I wouldn't go with this
- The volume buttons.... this one doesn't make sense to me. When the case is closed the volume buttons are covered by the spine of the cover. You can still use them, but you have to sort of guess where they are. When the case is open they're, oddly enough, even harder to get to as the folded spine of the cover blocks your thumb from getting right to them. You'll see in the photos.
Overall for about $25 this case was a huge let down. It does more to make the phone inconvenient to use than convenient. I'm going to get in touch with Voia to see about getting a refund. Maybe somebody else will have a different experience.
Click to expand...
Click to collapse
Agree with all your remarks. I've emailed Korea to see if they are changing the design at all. For me the biggest drawback is the cover not closing. If I put the phone down face down all the time to keep the case closed there's no point in having the window for the second screen. Will post if I get any satisfaction.
Sent from my Pixel C using Tapatalk
I have the Spigen case, but was considering this one. I wish it would close completely. I would be sold! Thanks for the review. Please keep us updated as to whether they are changing the design.
Sent from my LG-LS997 using Tapatalk
I also have the case.
The pros are the fact that the color actually matches (Titan in my case), It protects more than 80% of the screen when the door is closed and recesses the rear camera so putting it on a table will not scratch it.
I don't have an issue at all with the case door opening. As a matter of fact, I've had a spigen quick view case for my S4 which clipped close and it was a slight pain in the ass.
I like how the view hole doesn't block the camera. I at times wonder if they should have put a hole for the finger print as it is really annoying to open the phone and slip your right hand behind to access the fingerprint scanner. I also don't like how the volume buttons are blocked.
I'm happy with it over any of those worthless cases that only protect the back of the phone.
Also bought this case and is my favorite so far.
I found the following:
Although the cover didn't close all the way initially it now does. The binder side seems to stretch slightly with use until it's flush. Enough time in the pocket and it will become flush.
I wish it had a felt lined inside cover instead of just hard plastic
This case matches the contours really well and you can still enjoy the phone's design.
I really like having all the port side exposed so that cable and headphone blockage isn't an issue.
Joediver53 said:
Agree with all your remarks. I've emailed Korea to see if they are changing the design at all. For me the biggest drawback is the cover not closing. If I put the phone down face down all the time to keep the case closed there's no point in having the window for the second screen. Will post if I get any satisfaction.
Sent from my Pixel C using Tapatalk
Click to expand...
Click to collapse
Just received full refund from Korea. Told me to keep the case. I'd definitely buy it again if they fix the fit.
Sent from my Pixel C using Tapatalk
I have had the case about a week. Mine stays closed... perhaps a screen protector binding?
Very well made but yes you need to remember to use the fingerprint sensor with your right hand while opening. I find myself using the dot password more like I did on my g3 with the same type case. About ready to take a gromit hole punch and make a hole for my finger sensor : )
The materials are very slippery both closed and open. the one on my g3 was not nearly as slippery. Thinking of ideas to solve this that are clean.
I do like the protection for the front as I am hard on screens and dont like protectors.
It is also very thin which i like but as others mentioned not much protection. i dropped my g3 with a similar case several times. Some damage on the corners but the screen always survived. The case cracked on 3 corners : )
I switched to a tpu type case for a trip to Disneyland in case of dropping it but the thickness was a real pain. Jury is still out ...
Thanks to the OP for the review on this case (and for the heads up since I didn't know about this one yet) because I think I'll have to check it out, but I just a couple quick questions for anyone who might know.
How long did shipping take for you guys who have yours already? Also I bought a cheap flip case the day I got mine from Amazon and it's actually not as bad as I thought it would be, but does anyone know it it's possible to have the screen unlock when you flip it open but still be able to use your fingerprint everywhere else? Everytime I flip it open I have to put my pin number in (which I'd rather have it go straight to the screen) but if I want to disable it it also disables my fingerprint, does it anyone know if there's a way around that?
Sent from a ridiculously modified ColecoVision
Important update. Due to the hard plastic around the viewing window, it can cause scratches on your screen. I have a rectangular mark on the screen that can't be removed. This is a VERY STUPID move on the maker's part. How idiotic can a designer be?
esqueue said:
Important update. Due to the hard plastic around the viewing window, it can cause scratches on your screen. I have a rectangular mark on the screen that can't be removed. This is a VERY STUPID move on the maker's part. How idiotic can a designer be?
Click to expand...
Click to collapse
Ok now damn that would certainly be one hell of a deal breaker imo! Sorry to hear about that with your phone and I hope you don't take this the wrong way because I'm definitely not trying to say you're mistaken or anything (I don't even have the case so I couldn't argue without what you're saying even if I could to), but I'm just wondering can anyone else who has this case also confirm this?
Sent from a ridiculously modified ColecoVision