Develop Bugs

[Review] Seidio Innocase for Vibrant

So the first thing I noticed was that this is not a slider, but a front-and-back snap case. The product description says "Unique snap together design and opening slot makes putting on and removing your case easy" but for some reason thought it was a slider like the Surface II for the Captivate. So, it's not their fault I misunderstood.
Since the front bezel cover is so thin, my initial impression is that it seems a little flimsy. The back cover is also quite thin and has no lining like other Seidio cases. I think this was a conscious decision in order to keep the case as slim as possible. The fit is quite precise, so I don't think the lining would really make much difference as there is no movement within the case.
Although the front bezel piece seems flimsy at first, it feels quite sturdy once you snap it to the back cover. I do have some concerns the clips that snap together will wear down over time if you remove the cover frequently. Only time will tell on that point.
It has Seidio's "signature soft touch finish" which is like a somewhat rubberized matte texture. It's quite nice, but attracts prints if you have oily fingers.
Overall, the fit is pretty much perfect and the cutouts are precise. It's very thin and has a nice texture. Of the six cases I have, it's certainly the nicest. It does, however, cost about as much as the other five cases combined - $29.95.
At $19.95, I'd probably recommend it in a second. At $30 I have some reservations, namely the long term durability of the clasps that keep the two pieces together.

Vibrant case wont work

should be gettin mine tomorrow....
i think they have 6 month warranty which actually does work. thats another big plus with this company.

kolyan said:
i think they have 6 month warranty with actually does work.
Click to expand...
Click to collapse
Good to know. Hopefully won't have to use it.

Thanks for the review.
I'm still sticking to my white mesh case. I like really light and almost-not-there type of cases.

Thanks for the review, mine should be here within a day or so.
I ordered using the coupon code XMAS15 that was posted here. Not certain it's still valid though as the poster said it may expire on the 19th.
To the OP, how does the phone feel in your hands compared to what you had previously?
Also, did your volume buttons ever rattle? This is my only hesitation as the silicone case from t-mobile prevents the rattles I have from the volume rocker (which is loose).

s15274n said:
Thanks for the review, mine should be here within a day or so.
I ordered using the coupon code XMAS15 that was posted here. Not certain it's still valid though as the poster said it may expire on the 19th.
To the OP, how does the phone feel in your hands compared to what you had previously?
Also, did your volume buttons ever rattle? This is my only hesitation as the silicone case from t-mobile prevents the rattles I have from the volume rocker (which is loose).
Click to expand...
Click to collapse
For reference, I've had TPU's, hybrid TPU/Plastic (the one with hard clear back), a generic version of the Barely-There, and a flexible plastic perforated case (XMatrix Cover from DayDeal).
The added size and weight is similar to the XMatrix perforated case. It's not as slim as the Barely-There style cases, but I think it's definitely lower profile than TPU or silicone.
The finish is nearly the same as the Barely-There knock off I have, but seems a little more durable (the coating on the old case started to come off within days). It's smooth, almost suede-like, but has a bit of tack when held in the hand. When put on a smooth surface, like a desk or on wood trim in a car, it does not stick at all. This is a bit of a negative for me. One thing I like about TPU cases is that they kind of stick when you lay them on a smoother surface (I usually put my phone on the wood trim next to the gear shift in my car) but are not tacky otherwise.
As for the volume buttons, mine are not loose so I can't really comment on that issue.
One other thing I've noticed in the last few days of using the case, is that bezel cover is attached to the bottom part in only a few spots so there is some give in the areas that aren't clipped together. I think they should have added a couple more contact points on each side. It's not terrible, but I'm a bit OCD so it probably bothers me more than it would most other people.

I'll report back, should be here anytime now.. thanks man.

Case is good, very slim and feels good in hand, not perfect like other Seidio products. Like the review states, the case is NOT slide-on which sucks. I dont know why they used clip-on design, with slide-on case could have been even slimmer and more durable. Fit is also nice, but also not perfect, phone is just a little loose in case, not noticeable right away until you play with it.

kolyan said:
Case is good, very slim and feels good in hand, not perfect like other Seidio products. Like the review states, the case is NOT slide-on which sucks. I dont know why they used clip-on design, with slide-on case could have been even slimmer and more durable. Fit is also nice, but also not perfect, phone is just a little loose in case, not noticeable right away until you play with it.
Click to expand...
Click to collapse
After waiting around for the SGP Slider, I was also hoping this would be a sliding case.
I did get to hold a Captivate with the Innocase II, which is a slider, and the fit was pretty awful. It moves around a ton compared to this front-back type. I guess I'll take this style and more precise fit over slider with a bad fit.

Is it the bump on the Vibrant that is the main issue with a slider?
I was a bit let down to find this was a snap on the front/back design.

new coupon good through Sunday: MIX15
buy 2 products and get 15% off, free shipping for 2010

ordered one today from ebay for 18 and free shipping. thanks for the review and pics. Your pics make it look like it has a nice clean design in front.

djjeesh said:
ordered one today from ebay for 18 and free shipping. thanks for the review and pics. Your pics make it look like it has a nice clean design in front.
Click to expand...
Click to collapse
it is nice and clean. my nexus one case fits better, but they probably had to make it clip-on design i guess for Vibrant bump

Nice review! I can't help but feel like Seidio threw this product together in a hurry, after they realized there are people with Vibrants. It just looks cheap compare to their other offerings.

Just got it. initial impressions:
1 feels great in the hand. Looks good too.
2 I absolutely hate how easy it un-snaps.
3 I want to know their return policy till they have a legit case like the ones I am accustomed too from seidio.
4 it's much more difficult to press power now.
EDIT: okay, found out how to do the return, just waiting to hear back from them.

Cases

There is nearly only 3 types of cases out at the market.
First the hard plastic cases that are coming in 2 parts. There are the glossy ones and the trubberized ones in a wide variety of colors and styles at ebay or Amazon. The quality is OK but not perfect. What I like is the good protection in combination with the acceptable increase of size. The problem is that you nearly can't remove the front part of the case without breaking the very small bars fixing the case to the device. I like the rubberized ones most. They are looking more stable to me than the glossy ones. With the case it's more difficult to slide out the QWERTY keyboard. But it's acceptable. What I like very much is the protection of the on/off button and then loudness buttons. Because without the case I öfter press these keys withooany will.
Then there are the leather cases. There are horizontal and vertical ones. I tried to use the ones for the Samsung Galaxy S2 also, they fit. But of course not together with the hard plastic case together. For that I will try cases made for the HTC Sensation XL. I will share my experiences as soon as I get the cases.
The third category are cases that are blocking the hardware keyboard. That unacceptable for me. I tried rubber cases for the Samsung Galaxy S2 and it worked for one but the fitting is not not really good. The thickness of the device is quite different from most other smartphones.
Hope I could help a little bit and will share my upcoming experiences.

Thanks for checking out the cases, did they the leather/rubber ones block the camera at the back or did it have the correct position for the opening?

The leather ones I tried are for pulling out the device before use.
The rubber one I tried had a big camera hole on the back. But I forgot to check the other connector holes but if I remember correctly some cutting work has to be done. But this is possible with the right tools. Sharp knives and hole cutters for leather/paper.
Best thing is to try the case at a shop. Surely some fits better than others. But I think the Galaxy S2 category is the best you can get. The Galaxy Note ones could be also work, because it's taller but thinner.
The first category cases are made for the device and aren't blocking anything.

I wonder if anyone has tried the one-piece Speck cases yet (can't post links yet, but a Google search for "speck captivate glide" should bring up the page on Speck's site). They look good, but I'm curious if they restrict the sliding mechanism or block the keyboard at all.

fatxdad said:
(edited for brevity)
Click to expand...
Click to collapse
Just wanted to share my review, got a hard rubberized case on Amazon from ezbuy123. It's a 2-piece, snap-on. In the past, I've used Otterbox on EVERYTHING, but since they dont have an i927 case out yet, I figured I'd take a chance. The build quality is probably a 3.5/5 - it's hard, it's plastic, it's rubberized, that all is true. The edges of the case around the keyboard area are already starting to get chewed up, and the rubberizing doesnt have any real texture to speak of, I feel like I'm going to drop it when I use it. On the plus side, it isnt a weird neon color, and it doesnt add much bulk or weight to the phone.... All in all, I'd be pressed to give it 4/5 overall, it will definitely be replaced with an Otterbox if they ever decide to make a case for the i927.

Speck Sureslider Case
So I just received the Sureslider case today. I bought it for 24 dollars (from versiomobile before they charged 35 ).
Here's my review on it:
It's a one piece piece that has a hard plastic back with polycarbonate. On the front, it's made up of TPE (thermoplastic elastomer). The TPE gives the case a lip from the screen of the phone. It still slides when you put it on its face but not by much. Only the top part actually clips onto the phone. The back plate just kinda sticks to the phone.. somewhat. There's basically no restriction when you're sliding it, it feels like it's not even there. Regarding the top keys of the qwerty keyboard, it might've moved a nanometer, but not to significant to affect your typing.
Honestly, I don't think the price of $35 is worth it. I'd say it'd be more fair around 13 dollars. It also comes with a one-year warranty, so maybe that's where the high price came from?
The Sureslider case is technically a "one-piece" but when I got it, somehow the connection between the bottom and top part became loose and the top part came out. Needless to say, i thought it was going to be an easy fix. It wasn't . You can't just "slide" it into one piece since there's a hook and a little clip at the bottom to provide stability. After I managed to get the piece together, I went through the packaging, and there was this small instruction slip. It said "If the case becomes separated by mistake, align the two pieces and fit back together."
If you have any questions, feel free to ask.

I got the rubberized texture case from ebay (shop4phree*). 5 bucks included shipping. Just to get something on the phone quick before I scractched it. I have to say for being so cheap it has help up surprisingly well. I was going to go for a higher end case at a later time but it's now going on 2 months and I haven't felt the need to switch. The only drawbacks I can see is it interferes with the smoothness of the slide out keyboard (requires a little more finger power to push it up) and the extra bulk it adds makes your top row of keys a little tight when typing(especially with big fingers).Ive dropped my phone a couple of times and it has held intact.
Im a cheap bastard so my $5 case works great for me.

Amzer cases
Well i managed to snap the feelers on my first case (the black rubberized one), so I've moved on to an Amzer case from Amazon. It's a 2-piece, snap-together advertised as "one piece". The build quality is probably a 3/5 - it's hard, it's plastic, it's rubberized on the back half, but the front half is clear hard-poly that looks awful (definitely not at all like what the pic on Amazon makes it look). It doesnt add much bulk or weight to the phone, but it is slightly bulkier than the previous case I reviewed. Hopefully Otterbox will come up with a case for the i927 soon, I'm quickly tiring of these cases...
L4T

http://www.daydeal.com/home.php?cat=6439
Haven't tried any of them but their stuff is good.

Body Glove Captivate Glide
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.

Does anyone know of a otterbox case from another phone that would fit this one for protection? (commuter or defender)

And what about silicone cases? Soft ones I mean..

There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?

Mom is with ATT so she picked the Captivate Glide cuz I have Epic. LoL Basically, she also want a slide-out keyboard.
I ordered this for her on eBay.
http://www.daydeal.com/product.php?productid=64678
One problem, the sellers posted different quality. Some say hard plastic and some say rubberized. I went with a seller that said rubberized with good reviews. $7 with free shipping. I'm waiting on that to arrive and see how it feels

Just a question, since I'm not a native english speaker:
what does 'rubberized' mean? Does the term refer to a hard case with soft grip or to a flexible silicone-like case that you can even bend and it keeps the shape?
Thanks

clpo13 said:
I just received the Body Glove two-piece case for the Glide. It's $30 from AT&T, but I got it from All4Cellular for less (it's also on Amazon for even cheaper, which is a bit annoying as it was out of stock when I last looked there). It's pricey, but highly reviewed on AT&T's site.
It looks high-quality (none of that gummy rubber sort of stuff) and fits snugly. A bit too snugly, actually, as it was fairly difficult to get on and (according to other owners) nigh impossible to get off. On the plus side, that means it's not going to just pop off in your pocket.
The case fully covers the back of the phone (except for holes for the camera, flash, microphone, speaker, and buttons), and on the front, it covers the bezel. It doesn't interfere with the sliding at all, though the front cover does stick out enough to potentially cause problems with the top row of physical keyboard keys. That said, the keyboard side of the front cover has a little cutout at the bottom that may alleviate that problem a bit. I haven't noticed any major difficulties typing so far.
As with any two-piece case, there's a gap between the pieces where the phone slides, so it's not going to protect from anything getting between the phone halves. Also, it only comes in one color--a metallic blue sort of look--so if that's not your thing, you're out of luck.
I'd give it four out of five stars, knocking off a star for the difficulty in getting it off, though I'd recommend it for the build quality.
Click to expand...
Click to collapse
I got the same one from AT&T.
I agree with your comments. This case is much better quality than the no-name clear ones I've seen elsewhere. It is a pain to install / remove, but I like it tight, lol. I've had cases for other phones where it comes off easy, and they become a pain in the @ss.
They are the most expensive I've seen, but worth the price if it saves your phone from just one concrete ground fall.
-Am

hard case with soft grip
or you can call it a "grippy" hard case

rafeee2 said:
hard case with soft grip
or you can call it a "grippy" hard case
Click to expand...
Click to collapse
Thank you

just ordered the 3 in 1 combo case/holster for about $18 with free shipping...hoping its worth the money, i like the idea of the holster but i have a feeling the case and holster will be made out of cheap plastic....

rafeee2 said:
There's a Case Mate Barely There case now available for the Glide, you can find it on Amazon. Did anyone try it?
Click to expand...
Click to collapse
in their official site i cant find anything about that case, strange.

Decent ebay case?

Any tips on a decent ebay case?

Just received this one: http://www.ebay.co.uk/itm/261027269...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The fit is really tight, camera is somewhat protected (about 0.5mm beneath surface) and extra grip on the sides is good I guess (I was already used to the smooth finish one the phone itself so the grainy surface feel a bit weird). Buttons need a lot more force to push though. Good for some afraid to accidentally activating the phone while in their pocket, but for me it's ruining the usage experience a bit. I probably will get used to it after a couple of days.
Anyway it's really cheap and in my opinion worth a try.
Btw, the one advertised as grey is actually clear with matte clear in the middle.

Thanks, I preffer those that are more flexible though or the snap-on one.

I am using a case similar to this but bought from amazon, I like the idea that the camera lense is protected by 5mm, no scratches and case doesn't get in the way of pics
It adds a bit more bulk to the phone, less likely to slip out your hand as well, buttons are harder to press, no accidental presses while in your pocket, all the cut outs are perfect, which I was very pleased about
Think I payed £1.95 + p&p....I still think I robbed them, seriously under priced for such a well fitted case and all cut outs perfect
Sent from my HTC One X using Tapatalk 2

http://www.ebay.co.uk/itm/320911143777
The price was £1.49 (I think seller has changed the price) and you get case, screen protector and a stylus.
All the holes line up and it adds a bit of bulk to the phone. The screen protector was not a perfect fit but I seem to be using the stylus more than I thought (it works really well and keeps my finger prints off lol)
cant complain for less than 2 quid.

I can't say enough good things about this case: https://www.amazon.co.uk/Clear-Screen-Protector-Qubits-Accessories/dp/B007V38BF0/ref=pd_cp_ce_1
It's on amazon but I've seen them listed on ebay under different names.
It basically looks just like the pictures and really looks good on the phone. It doesn't add much bulk and does a really good job at protecting everything. The included screen protectors are nice. They scratch easily but they don't show prints as much or have that rainbow effect like harder protectors. There are tons of cases out there for 10x the price but I wouldn't trade them for this one. I wish the pogo pins weren't covered but I'm not sure they would work anyway with the added thickness of the case.

Nillkin TPU case

dakine said:
I can't say enough good things about this case: https://www.amazon.co.uk/Clear-Screen-Protector-Qubits-Accessories/dp/B007V38BF0/ref=pd_cp_ce_1
Click to expand...
Click to collapse
I got myself one of those from ebay. It fits really well and looks decent but the buttons are not molded well. Even the slightest touch and power / volume buttons will activate. Maybe I just got a dud product.
I will try to gouge some plastic away from the bottom where the buttons should fit and it should make the case usable. Not going to send it back because it was so cheap and not worth the hassle.

mrt159 said:
I got myself one of those from ebay. It fits really well and looks decent but the buttons are not molded well. Even the slightest touch and power / volume buttons will activate. Maybe I just got a dud product.
I will try to gouge some plastic away from the bottom where the buttons should fit and it should make the case usable. Not going to send it back because it was so cheap and not worth the hassle.
Click to expand...
Click to collapse
That doesn't sound like the same case because mine does not have any issues like that. The buttons feel normal; not particularly hard or easy to push.
Sent from my GT-i9000 using XDA App

Like I mentioned mine probably got overlooked by the monkeys in the QA line (if the manufacturers of these cheap cases even have those ).
If you got a perfect case then good for you - it fits the phone perfectly and protects the camera very well.
Here's the link for mine: http://www.ebay.co.uk/itm/300712871434

Ballistic Aspira Case: The slim, yet protective answer?

Stumbled upon this case and hadn't seen it mentioned in the forums here yet. I want something slim and pocketable, yet able to take a drop from waist height. This looks like the best thing I've found so far.
Due out mid-may according to the person I spoke with at the company. One thing she couldn't say for sure though was whether or not the power button was covered.
http://www.goballisticcase.com/products/htc-one-ballistic-aspira-series-case
The reason I asked her is if you look closely, you'll see a little bit of rubber sticking off the top... looks like a power button covering to me. What do you guys think? Anyone know more about this case, the company or seen a pre-production model? Maybe this is why it's been delayed* -- due to a mistake?
(See edited pics I attached below)
*Note: "Delayed" being my own personal interpretation as to why the case was not available at the launch of the new phone as most big case companies do nowadays.

The video at 0:29 shows the power button is covered. It could be that they will fix this like Poetic is.
On second look, I see that the video is a general one for their line and not for the One specifically.

Long813 said:
The video at 0:29 shows the power button is covered. It could be that they will fix this like Poetic is.
On second look, I see that the video is a general one for their line and not for the One specifically.
Click to expand...
Click to collapse
Yeah... I still am thinking along the same lines as what you were suggesting.

These cases are available now. Called and had a rep go find out that even though the picture looks like it's covered, that the IR functionality is not impaired. I'll report back if I get one.

its like you are carrying a soap on this case

ad78 said:
its like you are carrying a soap on this case
Click to expand...
Click to collapse
Find out in next week's exciting episode who I'll choose.... will it be, the slim yet protective answer... or the slimmest, most pocketable answer?
From the posts, comments and effort placed into details, information and thoughts people provide on these forums in general, we're all kinda part of a soap opera it seems. Makes sense, phones are a total love/hate relationship!

I can attest that Ballistic make some really good Cases. I had the Ballistic Smooth Case on my HTC One S and I loved it, it looked Stylish yet protective.
While the Ballistic Aspira looks good i still prefer the Smooth, too bad its not available for the HTC One.
That said, i would definitely give the Aspira a Try, the only thing that worries me is the hard plastic, looks scratchable...

Anyone tried this case out yet? I've got one on the way, looking for an ideal, attractive case with good protection all around (without being overkill and covering all the ports and adding unnecessary bulk). Not into the UAG case... hate the milspec/ruggedized styling.
I hope it looks like it does in the photo... has a very "Portal"-esque aesthetic to it

lol it does remind me of Portal as well.
But really, tbh... this looks far from slim and pocketable o_o
The UAG looks smaller than this.

Judging by reference dimensions and proportions, I figure the corners of the Aspira stick out a tiny bit more than otterbox Commuter, whereas the waists are a bit slimmer. UAG outside dimensions are about the same as Commuter, the real differences seem to be in how deep/thick the case is... UAG is the slimmest there, Commuter feels thick due to the rear and side profile, I expect the Aspira will feel better in that regard, even with the higher edges around the screen. Hopefully they don't get in the way of typing etc. I'd love to do a full side by side review with Commuter, Aspira, UAG with professional comparison and specific measurements, anyone got a UAG to send me?

ordered one, will report back in a few days...

jodeltje said:
ordered one, will report back in a few days...
Click to expand...
Click to collapse
Awesome, look forward to it. Very interested in comments regarding the lip around the screen and overall pocket-ability. Cause you can tell it would take a drop it better than a thin TPU or Seidio Surface.
Also make sure you take a photo of a very dark environment to engage the flash and let us know about any wash-out (if present). The design looks like it accounted for it in two ways by keeping the opening far away from the flash & lens + blacking out the rings around them.

Lauski said:
Also make sure you take a photo of a very dark environment to engage the flash and let us know about any wash-out (if present). The design looks like it accounted for it in two ways by keeping the opening far away from the flash & lens + blacking out the rings around them.
Click to expand...
Click to collapse
Will do

Ballistic Aspira = Great bloody case.
Wow, just arrived and got it on the phone, fantastic case! Quick first impressions review here, I'll make a real review thread soon as I can, this case deserves the attention.
-The case feels much, much slimmer than my otterbox Commuter, comparing the depth (thickness) and width of the cases the Aspira is a hair smaller in both dimensions, but it FEELS much smaller due to the superior ergonomic contours and curvyness. This is the exact criteria I was hoping for with this case, I'm a product design engineer myself and love good simple, ergonomics above all, favouring natural curves to fit the hand. Very impressed with the case in that regard, the glossy white back with grippy forward edges handles extremely well and much less likely to slip from my hand than my Commuter case.
-Built quality is fantastic, the plastics used are top quality with perfect finish, the overmolded one-piece design is right on the money, and the blends where the two materials meet are very precise and no hanging burrs, overlaps etc. Cutouts couldn't be better... they look fantastic and the size and placement is bang on. Nothing in the way of the power button IR blaster, no issue using 90 degree headphone connector, best looking camera cutout I've seen. To top that all off, the volume rockers function perfectly, a clear step up in function and feel from the Commuters which are too stiff, and there are no slots or cutouts around the rocker to let dirt in. Also, the Ballistic text logo molded into the one side looks really bloody clean... I dig it.
-Lip around the screen is about 3mm height, same as the Commuter. does not interfere with typing or swyping near the outside of the keyboard. the lip is raised the slightest bit in the four corners, adding some extra bounce protection there and does not get in the way, additionally it means when laying the phone face down, it's standing up the littlest bit on those corners, which I really like.
-Criticisms: don't have any yet... which is fantastic as I'm a severely picky perfectionist. initial impressions is top score in appearance, handling, and build quality... I don't think this case could be made any thinner without sacrificing protection, I feel it offers an excellent level of protection especially if combined with a glass screen protector.
Durability test will come throughout the week, I keep my phone in coveralls pocket all the time and work in a busy machine shop, my phone does get dropped from time to time and usually gets dirty with aluminum dust, coolant residue, etc from handling. the HTC One tends to pick up tiny steel filings around the speakers (magnets yo), the commuter was a PITA with this cause I had to take the case off the phone to clear them away... this case has just the right bit of flex around the speaker grills so it should allow me to wipe them away with the case on. Will report end of the week, and do a photo test with flash in the dark to check for reflection in the cutout.
Also I will get photos of it on the phone! it really looks fantastic :good::good:

Can anybody comment on how this case will fit into Slim (not skinny) jeans? Does the silicone part catch in pockets? Does it not wrap properly in some places? I had a ballistic for GS2 until I realized that thing was a tank and only needed a TPU case.
Also, the back is just polished polycarbonate as opposed to the Aspira's big bro, the GS, which has a TPU back that is virtually unscratchable. That's closer to what I had for the GS2. Can anybody tell us if the back is prone to scratches?

I'll give you detailed field report in a few days time, I keep my phone in jeans pocket usually and always taking it out to browse on transit, two hours a day, plus shop time. Should have an idea about scratch resistance and pocketability by Friday
Ps, did some low light flash photo tests, no signs of whiteout/reflective effects from camera/flash cutout.

ApoC_101 said:
Wow, just arrived and got it on the phone, fantastic case! Quick first impressions review here, I'll make a real review thread soon as I can, this case deserves the attention.
-The case feels much, much slimmer than my otterbox Commuter, comparing the depth (thickness) and width of the cases the Aspira is a hair smaller in both dimensions, but it FEELS much smaller due to the superior ergonomic contours and curvyness. This is the exact criteria I was hoping for with this case, I'm a product design engineer myself and love good simple, ergonomics above all, favouring natural curves to fit the hand. Very impressed with the case in that regard, the glossy white back with grippy forward edges handles extremely well and much less likely to slip from my hand than my Commuter case.
-Built quality is fantastic, the plastics used are top quality with perfect finish, the overmolded one-piece design is right on the money, and the blends where the two materials meet are very precise and no hanging burrs, overlaps etc. Cutouts couldn't be better... they look fantastic and the size and placement is bang on. Nothing in the way of the power button IR blaster, no issue using 90 degree headphone connector, best looking camera cutout I've seen. To top that all off, the volume rockers function perfectly, a clear step up in function and feel from the Commuters which are too stiff, and there are no slots or cutouts around the rocker to let dirt in. Also, the Ballistic text logo molded into the one side looks really bloody clean... I dig it.
-Lip around the screen is about 3mm height, same as the Commuter. does not interfere with typing or swyping near the outside of the keyboard. the lip is raised the slightest bit in the four corners, adding some extra bounce protection there and does not get in the way, additionally it means when laying the phone face down, it's standing up the littlest bit on those corners, which I really like.
-Criticisms: don't have any yet... which is fantastic as I'm a severely picky perfectionist. initial impressions is top score in appearance, handling, and build quality... I don't think this case could be made any thinner without sacrificing protection, I feel it offers an excellent level of protection especially if combined with a glass screen protector.
Durability test will come throughout the week, I keep my phone in coveralls pocket all the time and work in a busy machine shop, my phone does get dropped from time to time and usually gets dirty with aluminum dust, coolant residue, etc from handling. the HTC One tends to pick up tiny steel filings around the speakers (magnets yo), the commuter was a PITA with this cause I had to take the case off the phone to clear them away... this case has just the right bit of flex around the speaker grills so it should allow me to wipe them away with the case on. Will report end of the week, and do a photo test with flash in the dark to check for reflection in the cutout.
Also I will get photos of it on the phone! it really looks fantastic :good::good:
Click to expand...
Click to collapse
Thanks for the first impressions!, I'm glad that mine is on the way! . Looking forward for the pics ! Cheers

Just a little mid week update: case has totally grown on me, it's been perfect for me so far. Been working on a batch of small aluminum parts at work with machining and polishing, made sure to handle the phone plenty with my dirty hands.. dirt will barely stick to the glossy back, and wipes off easily. It will stick to the silicone but it wipes off that too. So far it's great for dirty job! Someone asked about or mentioned case materials of other ballistic cases, I believe the base material of this case is PA or PV based, most likely acrylic based. It's a super fine gloss finish in a solid milk white colour, with just enough flexibility to get on the phone. Poly-Acrylic makes sense since it feels great but also keeps enough tack for good handling, and depending on the blend and curing it can have excellent scratch and abrasion resistance, which this case appears to have. It should also exhibit good UV and sunlight resistance, as not to embrittle and change colour over time, which TPU can do. The lining material of the case is a silicone type rubberized plastic, it has a good solid cure and shouldn't shred like the softer durometer grades like some otter cases tend to do.
Off topic but funny cause of the irony, those aluminum parts I'm working on are fiber optic parts for the bad guys (Samsung). I believe Intel uses them too. I actually have no idea what they are for.

I just got this case today (gift from my boss who got it from out Ballistic rep). Having had it on for a few hours, I can tell you that it feels good , even though it's a little slick, not too thick, not as thick as an Otterbox Commuter. The power button is open, all the openings are where they're supposed to be. Seems like a good case

I just got mine in today and I really like this case! I have a zillion different cases and this one seems to give me the best of everything I want. I was using Case-Mate tough case before which I really like too.
Sent from my HTC One with hi-fi stereo and the Now Network.

iPhone 6 / 6S Full Cover Protective Case Review from rosegal.com

This case was actually pretty surprising to me. First of all, it has a very nice soft silicone feel to it. For me, this is great because it sort of causes some traction when you are holding the phone in your hand. Phones slipping is always a concern for me. Secondly, this case is super, ultra thin. It’s probably the best case I’ve had my hands on that makes the iPhone 6 feel like there is no case on it. Even though it’s thin, I feels solid and protective. This case comes packaged with a glass screen protector and is very easy to install. The case does come in two pieces that snap together. I’ve honestly never had a case come together so easily that was split design. All of the ports are completely accessible. The only critism I have is that the home button feels to be quite recessed. The TouchID still works fine, but it just feels a bit odd until you get used to it.
Code：RGCASE
Original price：$3.94
Coupon price：$1.99
It can be use for one piece product in each order. If they want to buy 2 pieces and both of them get the coupon price. They need to place two orders.