Related
So i did the ULVH1 update through ODIN, followed the instructions. Once i was on ODIN picked the file for it. Ran it at firt it said Boot! Then Pass! So phone trys to reset but i get stuck on the reboot screen! Did i just brick the phone? Im rooted and using a custom rom (jedi mind trick v7). I need help on this.
Oh onre more thing. When i was stuck on the reboot. I tried getting into CWM and it got me through. Aren't i suppose to be unrooted already once this update occured?
Reboot loop? If you can get into CWM, you can always wipe, flash, wipe cache to fix things. If you can get into CWM you're still ok.
Now the thing about unroot and recovery, there's sort of different things. You can be unrooted, but still have CWM. CWM just lets you flash new ROMs that aren't manufacturer certified, I believe. I forget the details. So booting into ICS you could be unrooted, but the recovery is still CWM/TWRP
You are much better off using TWRP then CWM.
premiatul said:
You are much better off using TWRP then CWM.
Click to expand...
Click to collapse
Would you still use TWRP to flash roms that the OP recommends using CWM or CWM Touch?
I also understand NAND backups you made with CWM won't be restored successfully by TWRP?
So I got it to work. Im a noob on this stuff, so i wasnt sure if the file that XDA had was bad or not. I used a diff. one from phandroid.com. Went through ODIN and it went through with no problem. Lost root and CWM. Basically im back to stock. I eventually rooted again and CWM. But the funny part about it is that why do i still have my pics on the gallery? I thought this deletes everything? Like i said. Im a noob! lol. Everything seems working fine. Screen shots (went back the old way, instead of Power and Volume down.) Also, ISIS is that on google play? :good:
No flashing back to stock does not erase your internal storage.
Sent from my SGH-T989 using xda app-developers app
Hello all just bought a new Samsung Galaxy SII from craigslist already rooted with 4.0.3 Jedi Mind Trick. After reading for what seems 4-5 hours i have been trying to put together how to properly without bricking switching it to 10.0.0 Stable as i use to use Cyanogenmod 2-3 years ago on my devices. Seem alot of things have changed and there is a cluster**** of stuff out there now. If you could direct me to a how to or show me how to do it i would greatly appreciate it!
Thanks all!
Assuming you have nothing personal to back up that you can't just download from google play or your google account again: download cyanogen 10 and it's gapps. reboot into recovery mode. factory reset, wipe data, wipe system, wipe cache, wipe dalvik. pick the install zip from sd card or so option, browse to cyanogen, then install gapps the same way. wipe dalvik again and reboot.
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Alawishis said:
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Click to expand...
Click to collapse
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
new ion? said:
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
Click to expand...
Click to collapse
trying to look up how to do that now .... Searching the forum now... Might you be able to tell me real quick how? I already Downloaded the 5.2 file they suggest to use but can't find a working toturial that is just for flashing the cwm.
melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
arcsine said:
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
Click to expand...
Click to collapse
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
melvinator said:
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
Click to expand...
Click to collapse
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
new ion? said:
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
Go back, format system, and then reinstall.
Sent from my SAMSUNG-SGH-T989 using xda premium
Update your recovery to twrp or cwm 6+ and don't use dark side scripts
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Please excuse my harshness but this is not as hard as many make it seem. I would say if it takes you more than a couple attempts maybe it is just not for you. I only say this because I would hate to see you mess up your phone. Now if you think a bootloop is a brick then we need to do things at a slower pace with you.
If you already have your phone rooted then
1.download goomanager from the playstore and then
2.open it up and allow it to grant permission from CM
3.hit menu button while goo manager is open
4.click on install OpenRecoveryScript
5.let it do its thing
6.reboot into your new TWRP recovery
7.Wipe/Data Factory Reset
8.Flash Rom
9.Flash Gapps
10.Reboot
You can throw in a backup of files somewhere in there if you like.... Your choice
melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
I had a bootloop when using CWM v6.0.1.5. So a friend of mine told me he had success with CWM v6.0.1.5 Touch. So I switched to the touch recovery and... SUCCESS.
Here's the link to CWM touch and non-touch:
http://forum.xda-developers.com/showthread.php?t=1893464
A boot loop could mean a bad download or bad flash but it is most definitely NOT a bricked device. All you needed to do was get a fresh download and move it to your SD card by mounting it in recovery. Then, wipe EVERYTHING but the SD. EVERYTHING. Then flash the ROM, Gapps and whatever radio. I go from CM to AOKP to other random TW roms all the time and never have issues.
The 2 best recoveries are twrp or my favorite because I'm used to it is cwm 6.0.1.5. http://forum.xda-developers.com/showthread.php?t=1844637
Also if your phone boot loops don't freak out' just either reboot to see if that works out first and if not reboot into recovery. Also with these new recoveries do not use dark side scripts.
Factory reset
Format system
Format cache
Format data
Flash ROM
Flash gapps
Reboot and enjoy
Sent from my SAMSUNG-SGH-T989 using xda premium
This did it!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Sorry for the necro on the thread, but I didn't want it to be stated I didn't look around some either.
I am going from JMT to CM and want to make sure it's as seamless as possible. I use CWM and usually usually use darkside complete wipes, but I read in a previous post not to use darkside. Is there a reason for this? I can't see why this wouldn't work as it's just a wipe.
Also I use Titanium Backup. Is it possible to backup my apps and data and restore them since its not TW any longer? I want to be able to restore as much of my data as possible and make sure I don't lose it.
P.S. - If thread necroing is not appreciated, I apologize.
I really hate to start a new thread but I really can't find a reason/solution to this issue. It's just as the title says. I tried flashing the MIUI ROM just as any ROM and got a failed error. Then went to do my nandroid restore and it just hangs on the splash screen (boot screen). Anyway I thought there could be a bad download so I took out the SD and redownloaded synergy on my laptop, then put it back in the phone and nothing but the nandroid should let me restore. I even tried moving the files to the internal SD and nothing. The only thing I can think of is to Odin back to stock? Is it the same method as rooting? I'm sure I can find that out, but I'm just confused why it seems TWRP doesn't want to work. Thanks for any help, it's 4 a.m. here and I'm dog tired.
Are you on the latest TWRP?
If all else fails you could go back to stock and root again.
DarkManX4lf said:
Are you on the latest TWRP?
If all else fails you could go back to stock and root again.
Click to expand...
Click to collapse
I think so. Yeah, just didn't want to go throught it all, and didn't know why.
jtadak said:
I think so. Yeah, just didn't want to go throught it all, and didn't know why.
Click to expand...
Click to collapse
Can I just reflash recovery from the state I'm in, or do I still need to unroot? I've moved some of my files to the ext SD within recovery but some things won't move and I really don't want to wipe it.
jd14771 said:
Try wiping everything 3X, then go to the reboot menu, and reboot system, wipe both the cache and dalvik cache and try to restore.
Click to expand...
Click to collapse
Do you mean reboot recovery? I can't reboot system. Sorry, not trying to split hairs, just trying to be specific.
Odin back to stock seems like the best option.
Sent from a galaxy note 2 far far away...
are you able to flash a different rom, say a stock rom? It's possible you got a corrupted TWRP download.
Since they just released another update 2.4.3, you might want to try and download the zip file, wipe cashe and davick (may want to do it three times). Reboot back into TWRP 2.4.3 and see if it gives you some better luck.
I've had Nandroid backup that didn't work for whatever reason. I didn't test it prior to needing it, and got burned. It just wouldn't show up in the restore menu.
On a side note, what error did you get when you tried flashing MIUI?
Try rebooting recovery when you are in recovery already once before flashing/restoring anything anything.
mexiking713 said:
Odin back to stock seems like the best option.
Sent from a galaxy note 2 far far away...
Click to expand...
Click to collapse
Yes, that's what I did. I'm just bummed I had to wipe storage. Oh well, it's inevedible... I dig that sig though, with phone line up.
lovekeiiy said:
are you able to flash a different rom, say a stock rom? It's possible you got a corrupted TWRP download.
Since they just released another update 2.4.3, you might want to try and download the zip file, wipe cashe and davick (may want to do it three times). Reboot back into TWRP 2.4.3 and see if it gives you some better luck.
I've had Nandroid backup that didn't work for whatever reason. I didn't test it prior to needing it, and got burned. It just wouldn't show up in the restore menu.
On a side note, what error did you get when you tried flashing MIUI?
Click to expand...
Click to collapse
I tried multiple ROMs, but not a stock one. Hmm, I was on 2.3.2.3. I did'nt get a special error, just said a red message saying failed.
Evo_Shift said:
Try rebooting recovery when you are in recovery already once before flashing/restoring anything anything.
Click to expand...
Click to collapse
Tried that. Did'nt work.
jd14771 said:
no, i meant reboot system, the recovery will warm you that there is no os installed but go fourth with it, it will turn off and reboot back to recovery. at that point in time, wipe cashe/dalvik cache and try to install.
Click to expand...
Click to collapse
Ok, I was'nt sure. I just went back to stock. I just wanted to know what exactly was going on and why.
The only thing different on my phone is I got a 32 gig SD card. I transfed some of my files a couple days before doing anything of this. That's the only thing I can think of. Even after root/unroot it STILL won't do my nandroid restore. I had so much time and work into the apps I set up, games, ect. Really freakin sucks. I even went into the the TWRP backup folder and made sure the backup files were there before doing anything. I never even got to flash many ROMs, I kinda just stayed on Jellybomb.
I had the uTorrent app installed and I noticed that it changed a lot of files with the "u" in front that the uTorrent app has. Anyone know why that is?
Sent from my SPH-L900 using xda app-developers app
This is what it did to a lot of my files. But not the ones I tried to flash.
Sent from my SPH-L900 using xda app-developers app
I tried flashing two different roms (synergy and chemistry) on my sprint galaxy s3. It turns on but then wont go past the "galaxy s III" logo. I just restored my backup and all is well but I really want to get multi window on this thing so I could really use some help as to what is not letting me boot up all the way. The last thing i messed around with rooting was my DroidX and with that it really mattered a lot which version of android you were flashing from. I have 4.1.2 the most recent update. Is that why these roms are not working? Any help would be much appreciated I am very excited to get a killer rom on this bad boy.
Did you clear /data, /system, cache, and dalvik cache before flashing? If not, what is your flashing procedure?
But no, the current version should not make any difference when flashing because you are clearing everything anyway
CNexus said:
Did you clear /data, /system, cache, and dalvik cache before flashing? If not, what is your flashing procedure?
But no, the current version should not make any difference when flashing because you are clearing everything anyway
Click to expand...
Click to collapse
I boot into recovery after i put the rom on to my sd card. Then wipe the factory data, cache partition, and delvik cache. I do those steps twice, then install the rom. The install seems to go fine, it always says successful at the end, it just wont go past that screen. Does it mater which version of clockworkmod I use?
You need to wipe /system too. A factory reset only clears app data, and thats no help if you're not wiping the OS as well because you're installing the new one on top of the old without cleaning up first...and thats why it wont boot because different pieces are getting mixed and not together with the files it should be with
It should say something like "format /system"
CNexus said:
You need to wipe /system too. A factory reset only clears app data, and thats no help if you're not wiping the OS as well because you're installing the new one on top of the old without cleaning up first...and thats why it wont boot because different pieces are getting mixed and not together with the files it should be with
It should say something like "format /system"
Click to expand...
Click to collapse
Thank you so much for your quick response. As far as I can tell, I am wiping everything I should be. I use clockwork recovery mod version: and the choices it gives you are: Wipe data/factory reset, wipe cache partition, and wipe dalvik cache. From all the instructional threads I've read, those are the only things you need to clear out before the install. My clockwork version is v5.5.0.4 which i think might be really old. Could that be my issue? Does it matter how I rooted it? I just tryed to put jellybomb v14 on it and it didn't even give me the galaxy s III logo. Luckily it booted back into recovery though. I really don't want to hard brick this thing.
Which recovery are you using?
For TWRP, I generally recommend formating system too.
Also, make sure to flash the rom zip and THEN the gapps.
A-Shin said:
Which recovery are you using?
For TWRP, I generally recommend formating system too.
Also, make sure to flash the rom zip and THEN the gapps.
Click to expand...
Click to collapse
clockworkmod v5.5.0.4
cchrisrollins said:
clockworkmod v5.5.0.4
Click to expand...
Click to collapse
Make the switch to TWRP v2.3.1.0 (newer ones I've heard have problems) but you will be thanking me later. It's way easier and much better than CWM... just an FYI for ya!
cchrisrollins said:
clockworkmod v5.5.0.4
Click to expand...
Click to collapse
I suggest trying a flash with TWRP. If you are unsure how to install TWRP, just download the Goomanager app, then choose install Open Recovery Script. But, before you install or change anything, look around a bit on how to install it. Make sure you follow directions step by step. After you have installed TWRP, try flashing again. Good luck!
Haha, so it looks like switching to twarp is something that i need to do, I'll start researching how to do that. I don't thing clockwork is causing the issues im having, but I could certainly be wrong. Since my phone is rooted, that also means the bootloader is unlocked rite?
cchrisrollins said:
Haha, so it looks like switching to twarp is something that i need to do, I'll start researching how to do that. I don't thing clockwork is causing the issues im having, but I could certainly be wrong. Since my phone is rooted, that also means the bootloader is unlocked rite?
Click to expand...
Click to collapse
Samsung bootloaders come unlocked by default, so yes
Easiest way to switch is to download Goo manager from the Play Store and have it install TWRP for you
Generally speaking, CWM is great on most devices, but for the S3 it's TWRP that's the best and easiest to use
And when flashing new roms, make sure to always format system, it prevents corrupted files from showing up because you would be installing the new system right on top of the old one if you don't
So I did as you suggested. I installed twrp from the play store. I made a backup on there so I should be ready to tryn flash again. The only thing is I use this phone for work all the time and if mess this thing up I'm gonna be in deep doo doo haha. So with the last several attempts failing, I'm a little apprehensive to try again. I'm going to re-odin and flash a different root just to be safe (I used team epic v5). Can you guys recommend a good root to use for my s3?
Sent from my SPH-L710 using xda app-developers app
cchrisrollins said:
So I did as you suggested. I installed twrp from the play store. I made a backup on there so I should be ready to tryn flash again. The only thing is I use this phone for work all the time and if mess this thing up I'm gonna be in deep doo doo haha. So with the last several attempts failing, I'm a little apprehensive to try again. I'm going to re-odin and flash a different root just to be safe (I used team epic v5). Can you guys recommend a good root to use for my s3?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
If you made a nandroid backup in TWRP (I'd recommend to put it on the external memory, but that's just me), you should be good to try any ROM you want (only Sprint ROMS). Just follow CNexus's post (linked for posterity). Wipe system as well as factory reset, cache, and dalvik, prior to installing the ROM.
cchrisrollins said:
So I did as you suggested. I installed twrp from the play store. I made a backup on there so I should be ready to tryn flash again. The only thing is I use this phone for work all the time and if mess this thing up I'm gonna be in deep doo doo haha. So with the last several attempts failing, I'm a little apprehensive to try again. I'm going to re-odin and flash a different root just to be safe (I used team epic v5). Can you guys recommend a good root to use for my s3?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
If you've already rooted, re-rooting isn't going to fix anything, so no need to go there.
As previously explained and detailed, do a full system wipe, and you'll be good to go.
Thank you guys so much for your very quick responses, thank you for bearing with my noobishness too haha. I am going to tryn reflash jellybomb tonight, I'll post on this thread how it goes (hopefully good).
So unfortunately it was the same result with the TWRP. Tryed doing it with a few different roms. Some roms will boot to the "Galaxy s III" logo and others like jellbomb wont even get that far. It just flashed the Samsung logo and that was it. It's gotta be something simple that im missing here, but I can't figure out what it is. On the jellybomb install afterwards TWRP did come up with a message that said something along the lines of: your phone doesn't appear to be rooted, would like to install bla bla bla. So that doesn't make sense, because I know that I do have root access. Feeling pretty frustrated because I'm doing everything the correct way. HELP!
cchrisrollins said:
So unfortunately it was the same result with the TWRP. Tryed doing it with a few different roms. Some roms will boot to the "Galaxy s III" logo and others like jellbomb wont even get that far. It just flashed the Samsung logo and that was it. It's gotta be something simple that im missing here, but I can't figure out what it is. On the jellybomb install afterwards TWRP did come up with a message that said something along the lines of: your phone doesn't appear to be rooted, would like to install bla bla bla. So that doesn't make sense, because I know that I do have root access. Feeling pretty frustrated because I'm doing everything the correct way. HELP!
Click to expand...
Click to collapse
It took me like 4-5 months to personally figure out that the problem was the kernel. You need to flash a kernel right after you flash the ROM. Either the stock kernels or better kernels like Anthrax will do. I know that for jellybomb, there's a kernel included in the Rom but for some reason,it got stuck on the gs 3 logo if I didn't flash another kernel.
Oh thank goodness there is something else I can try, I was out of ideas. Thank you!
Sent from my SPH-L710 using xda app-developers app
cchrisrollins said:
Oh thank goodness there is something else I can try, I was out of ideas. Thank you!
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
No prob, just hit dat thanks button do you know where to get the kernels?
Zin0 said:
No prob, just hit dat thanks button do you know where to get the kernels?
Click to expand...
Click to collapse
I tryed the KT47 AOSP Jellbean kernel after flashing jelly bomb and it did the same thing it did before, black screen after flashing the samsung logo
Now I did go into fix permissions and it did say failed, is that abnormal?
This is my exact procces:
1. boot into TWRP
2. factory reset
3. system wipe
4. cache wipe
5. Dalvik wipe
6. Install from external SD: jellybomb v14
7. Wipe cache/Dalvik
8. Install Kt47 kernel
9. Wipe cache/Dalvik
Anything wrong there?
Howdy there all. Just got my new S3, rooted and everything without a hitch... that is, until I tried to flash a new font in rom toolbox pro. Now it's bricked and stuck at the 4GLTE screen. Is there anything I can do?
I need a little assistance here...
smallp0x said:
Howdy there all. Just got my new S3, rooted and everything without a hitch... that is, until I tried to flash a new font in rom toolbox pro. Now it's bricked and stuck at the 4GLTE screen. Is there anything I can do?
I need a little assistance here...
Click to expand...
Click to collapse
If you can turn it on boot to recovery and flash a rom.
Sent from my SPH-L710 using xda app-developers app
What ROM are you on?
If you have important data needed, you could make a backup, flash the ROM you are on, try restoring data ONLY, and then profit.
Sent From My Rooted, S-OFF'd Blackberry Curve using the iOS XDA Application for Android.
Hope you have a backup. Not to be a jerk but there's a reason Toolbox throws a warning to backup first.
Are you bricked or just boot looping?
jfcooley said:
Hope you have a backup. Not to be a jerk but there's a reason Toolbox throws a warning to backup first.
Are you bricked or just boot looping?
Click to expand...
Click to collapse
Not bricked as he said it's booting to the lte screen... worse comes to worse, Odin stick reroot and start over. Next time before modding anything on your device make a backup in recovery
SPRINT GS3 FAQ
what to do???
flastnoles11 said:
Not bricked as he said it's booting to the lte screen... worse comes to worse, Odin stick reroot and start over. Next time before modding anything on your device make a backup in recovery
SPRINT GS3 FAQ
Click to expand...
Click to collapse
what do you mean????
deadman0 said:
what do you mean????
Click to expand...
Click to collapse
Basically, next time before you flash a mod like the person in the original post, make a backup of your current setup in recovery (twrp). So if anything like this does happens, you can easily restore your phone back to its last working state. The OP may be able to dirty flash a rom and may be able to keep his old data/apps.
lvpre said:
Basically, next time before you flash a mod like the person in the original post, make a backup of your current setup in recovery (twrp). So if anything like this does happens, you can easily restore your phone back to its last working state. The OP may be able to dirty flash a rom and may be able to keep his old data/apps.
Click to expand...
Click to collapse
so i just root again my phone or deroot it???
Also will that work in another phone???