Related
Ok, so I searched high and low and saw nothing about anyone who couldn't get there GS3 to boot at all . . .
So My rogers I747M was succesfully rooted with Odin root not trip. And then i flashed It with the generic rooted jelly bean ROM. Successful again everything seemed fine. So i was confident in shooting for CM10(even though ive had troubles in the past) And i put the zip. in the sd and booted into CWM recovery and did a factory reset, cache and dalvik. Went to install CM10 from sd and it gave me error 7. so i reboot device and loaded into the stock rooted jellybean again to try and put another fill in the SD. Tried booting into recovery again. Now nothing at all, I have tried pulling the battery, even for hours. And then button combos..Nothing. Leaving cord in with battery out,button combos,battery in...Nothing
I'm afraid of the worst ATM, i had the unbrickable Captivate before this with my JIG and all, I'd did this to that phone, but the JIG saved me.
So the phone doesn't boot and you can't enter recovery?
The error 7 was cause by you not having the latest version of cwm.
Now for the brick part: try pulling out the battery, put it back and do the button com to enter recovery , old it for like ten seconds. Then plug it to your computer to see if Odin dectects it.
Once you tried it give me some feedback and I will check for further help. But if you are sure you didn't flash a wrong ROM for your device or a wrong kernel. The error 7 shouldn't have bricked your phone
Sent from my SGH-I747 using xda app-developers app
liltitiz said:
So the phone doesn't boot and you can't enter recovery?
The error 7 was cause by you not having the latest version of cwm.
Now for the brick part: try pulling out the battery, put it back and do the button com to enter recovery , old it for like ten seconds. Then plug it to your computer to see if Odin dectects it.
Once you tried it give me some feedback and I will check for further help. But if you are sure you didn't flash a wrong ROM for your device or a wrong kernel. The error 7 shouldn't have bricked your phone
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Still No luck, whenever i try to plug it in the computer, it just gives me three quick "DUH_DUH_DUH"s as is to tell me the computer failed to recognize. I'm afraid i may have to take it back to rogers, it's not two weeks old yet so perhaps ill get away with defective, i wonder if they deem that sort of thing in store or at the depot. Because i know they wont get it too boot there, so if they did it in store perhaps ill just get an exchange
Yeah go ahead with the replacement they will not check into it. Worst case scenario, they will fix it and send it back to you
Sent from my SGH-I747 using xda app-developers app
And luckily i woke up early this morning with confidence that I could spill some crazy story that made it sound like it overheated and died, and now I've got a new one, best be careful with this, i think im going to stay away from CM10, its killed 2 phones of mine lol, I believe any answer i will get will say that it was a user error thanks anyway !!!
I was making a TWRP Backup when all of the sudden my phone just randomly turns off. I grabed my phone and it was really hot. Tried turning it on, but nothing happened. Then I connected it to the ac adapter and it turned on, but it would go to the LG logo, the screen turns black then it restarts. This does not stop unless I unplug it. I had previously made two backups before and nothing like this happened, but this time I enabled conpression<-------- This must have been what caused this. All I want to know is if this can be fixed or not. If it could be fixed I would be so happy if somone could tell me how to fix this. THANK YOU. P.S. THIS PHONE IS A BEAST. D
cgtrr34 said:
I was making a TWRP Backup when all of the sudden my phone just randomly turns off. I grabed my phone and it was really hot. Tried turning it on, but nothing happened. Then I connected it to the ac adapter and it turned on, but it would go to the LG logo, the screen turns black then it restarts. This does not stop unless I unplug it. I had previously made two backups before and nothing like this happened, but this time I enabled conpression<-------- This must have been what caused this. All I want to know is if this can be fixed or not. If it could be fixed I would be so happy if somone could tell me how to fix this. THANK YOU. P.S. THIS PHONE IS A BEAST. D
Click to expand...
Click to collapse
Can you boot into recovery and restore a previous backup?
Sent from my LG-LS970 using Tapatalk 2
cowfodder said:
Can you boot into recovery and restore a previous backup?
Sent from my LG-LS970 using Tapatalk 2
Click to expand...
Click to collapse
It does not let me go into recovery, the screen goes black then restarts. All I can do is go into fastboot and Download mode.
cgtrr34 said:
It does not let me go into recovery, the screen goes black then restarts. All I can do is go into fastboot and Download mode.
Click to expand...
Click to collapse
Likely bricked. Do you have flashing notification and capacitive lights? Have you LGNPST'd? If yes to both of those questions, you're in the same predicament as I was and hopefully you have insurance, because your phone is fried.
xboxfanj said:
Likely bricked. Do you have flashing notification and capacitive lights? Have you LGNPST'd? If yes to both of those questions, you're in the same predicament as I was and hopefully you have insurance, because your phone is fried.
Click to expand...
Click to collapse
I do have flashing notification and capacitive lights. But I don't know what LGNPST is.(sorry I'm new to this) this is my first android phone
cgtrr34 said:
I do have flashing notification and capacitive lights. But I don't know what LGNPST is.(sorry I'm new to this) this is my first android phone
Click to expand...
Click to collapse
Sounds like you are toast. Take it to Sprint and have em swap it out for ya. Hopefully you either have insurance or are within your 14-days to return it.
xboxfanj said:
Sounds like you are toast. Take it to Sprint and have em swap it out for ya. Hopefully you either have insurance or are within your 14-days to return it.
Click to expand...
Click to collapse
Will they swap a rooted and unlocked phone?
cgtrr34 said:
Will they swap a rooted and unlocked phone?
Click to expand...
Click to collapse
Sprint's policy on root is to document it but not do anything about it, so they would swap it. If you're worried, I can help you restore stock firmware.
xboxfanj said:
Sprint's policy on root is to document it but not do anything about it, so they would swap it. If you're worried, I can help you restore stock firmware.
Click to expand...
Click to collapse
How could I restore it to stock firmware. And also thank you for replying back and helping me out
cgtrr34 said:
How could I restore it to stock firmware. And also thank you for replying back and helping me out
Click to expand...
Click to collapse
I will PM you about that since it is against forum rules and perhaps laws to post copyrighted stuff here.
xboxfanj said:
I will PM you about that since it is against forum rules and perhaps laws to post copyrighted stuff here.
Click to expand...
Click to collapse
OK thank You so much!
cgtrr34 said:
I was making a TWRP Backup when all of the sudden my phone just randomly turns off. I grabed my phone and it was really hot. Tried turning it on, but nothing happened. Then I connected it to the ac adapter and it turned on, but it would go to the LG logo, the screen turns black then it restarts. This does not stop unless I unplug it. I had previously made two backups before and nothing like this happened, but this time I enabled conpression<-------- This must have been what caused this. All I want to know is if this can be fixed or not. If it could be fixed I would be so happy if somone could tell me how to fix this. THANK YOU. P.S. THIS PHONE IS A BEAST. D
Click to expand...
Click to collapse
WTF!!!!! I just bricked my phone in less then 24 hours of owning it. I just rooted and unlocked it and right after making a TWRP Backup and rebooting my phone wouldn't turn on and it was HOT AS HELL!!
I got it exchanged at Best Buy but now im scared to do anything with it.
shook187 said:
WTF!!!!! I just bricked my phone in less then 24 hours of owning it. I just rooted and unlocked it and right after making a TWRP Backup and rebooting my phone wouldn't turn on and it was HOT AS HELL!!
I got it exchanged at Best Buy but now im scared to do anything with it.
Click to expand...
Click to collapse
Same happened to me. The phone overheats in recovery, so do what you need to do and then get out of it.
xboxfanj said:
Same happened to me. The phone overheats in recovery, so do what you need to do and then get out of it.
Click to expand...
Click to collapse
Im on the new phone and Im using clockwork and all is fine so far. I definitely suggest guys stop using twrp.
Sent from my LG-LS970 using XDA Premium HD app
Restore to stock when stuck at LG logo screen
xboxfanj said:
I will PM you about that since it is against forum rules and perhaps laws to post copyrighted stuff here.
Click to expand...
Click to collapse
Would you please help me out to restore to stock from a stuck LG logo screen? I can't even boot into fastboot or recovery. I tried LGNPST number of tries with different .bin files with no luck. I also tried a lot of diff things, too. Please email me at [email protected]. Thank you very much!
phatjulie said:
Would you please help me out to restore to stock from a stuck LG logo screen? I can't even boot into fastboot or recovery. I tried LGNPST number of tries with different .bin files with no luck. I also tried a lot of diff things, too. Please email me at [email protected]. Thank you very much!
Click to expand...
Click to collapse
I suggest you TEP it.
Sent from my LG-LS970 using xda premium
phatjulie said:
Would you please help me out to restore to stock from a stuck LG logo screen? I can't even boot into fastboot or recovery. I tried LGNPST number of tries with different .bin files with no luck. I also tried a lot of diff things, too. Please email me at [email protected]. Thank you very much!
Click to expand...
Click to collapse
Pull battery using a torx t5 screwdriver and phillips #00 if you don't have insurance.
xboxfanj said:
Pull battery using a torx t5 screwdriver and phillips #00 if you don't have insurance.
Click to expand...
Click to collapse
What's the purpose of pulling battery out? Just a try? I'm gonna have to get it from Fry's tomorrow and try that first.
phatjulie said:
What's the purpose of pulling battery out? Just a try? I'm gonna have to get it from Fry's tomorrow and try that first.
Click to expand...
Click to collapse
Because your phone doesn't know if it needs to be in charging mode or booting. Pulling battery will fix it.
Sent from my LG-LS970 using xda app-developers app
I had a similar problem as you. Upon getting the phone I rooted and used the FreeGee app from the Google Play store to unlock the bootloader. Everything seemed fine and dandy, until one day when I let my phone's battery drain completely. Pluggin it in to a wall charger resulted in the failed boot where the LG logo flashes before going to a blank, but backlit screen. Luckily, the first few times this happened, through a combination of quickly plugging and unplugging the usb cord and holding the volume up+power button, I could get it into recovery (TWRP). Then a simple cache & dalvik cache wipe, and the phone would boot up as if nothing ever happened. Very strange.
Well yesterday this happened again, however, this time there was no getting the phone into recovery. My previous methods of button mashing and plugging and unplugging weren't working. So, I decided to bite the bullet and use LGNPST to get back to ZV7. Now, like you mentioned, this failed boot would automatically happen, without pressing the power button to turn it on. So it was difficult to get the phone to stay off. I found that with the phone unplugged, if you continue to press the power button until the blank backlit screen turns off, AND continue to hold the power button for an additional five seconds, the phone would stay off and not auto power on into the failed boot.
Once I was able to get the phone to stay off, I pressed the middle of the volume key to depress both volume up and down, and then plugged a usb cord that was attached to my computer. This powered on the phone into download mode. Following the LGNPST guide I was able to get to around 67% complete before my phone turned off and an error message flashed on the computer screen telling me to power cycle the phone and reconnect. Well, the whole 67%/85% LGNPST failure is apparently common and not indicative of an actual failure; HOWEVER, my phone became completely unresponsive. It wouldn't power on at all. It didn't matter if the usb was unplugged or connected to the computer or wall charger. So, I was forced to unplug the battery. I followed this tutorial and successfully disconnected and reconnected the battery cord, and the phone shot back to life. It even booted up into the factory stock ZV7 rom. I guess that LGNPST was successful. It looked like I was on my way to returning my phone to breezy's deodexed ZV9 stock rom that I was previously running.
I went ahead and re-rooted, ran the FreeGee app again, and rebooted into recovery. Then I made a backup and attempted to flash my new rom. Now, I think this is where I royally screwed up. I was pleasantly surprised to see my screen layout and all of my settings still intact after LGNPST back to ZV7 and thought I could just wipe the caches and ignore the factory reset and system wipe before flashing. Perhaps it was this, but part of me also thinks there might be something wrong with my battery draining extremely fast in recovery.
I proceeded to flash and all seemed good, but rebooting resulted in the LG logo failed boot that we have already discussed. So, I went ahead and repeated the LGNPST-re-root process numerous times (switching to the freegee 0.5 batch file instead of the app). Everytime after the first initial restore, I could never get my phone to enter recovery. As soon as I rebooted after using freegee, the phone would be soft bricked again. Sometimes I would get the LG logo thing, other times I would get the dreaded alternating flashing red notification light and soft keys. A battery pull was usually required in these circumstances before I could get back into download mode to start all over.
I was about ready to give up when I took to the LGOG irc channel. That's when Xboxfanj stepped in and helped me out IMMENSELY. Over the course of several hours, he walked me through flashing some partitions in ADB. At times it seemed like there was no hope and that I should have just returned the phone, but he failed to acquiesce, we pushed forth trying a couple of other bootloader options. The new bootloader appeared to have fixed the phones erratic behavior with powering on and off, but I had no rom to boot into and no recovery. Xboxfanj recommended using fastboot to flash over a recovery. Once in the new bootloader screen my Windows XP machine detected new hardware and wanted some drivers. I attempted to use the [ADB/FB/APX Driver] Universal Naked Driver 0.72, but XP indicated that I was missing 'winusbcoinstaller2.dll'.
I grabbed winusbcoinstaller2.dll from here and all was good. Fastboot recognized the phone, I was able to flash recovery and subsequently boot into recovery. From there I reformatted the system, wiped data/factory restore, wiped cache, wiped dalvik cache, and flashed breezy's ZV9 deodexed rom.
Fortunately, after around 7 hours, I am happy to say my phone is back to being rooted, unlocked, and running ZV9. It powers on and off properly and can get into recovery without a hitch. I'm still curious what will happen if I let my battery drain completely. Perhaps I'll try it some time this week. I'll be sure to post back here if/when I do that. All in all, it was a harrowing, but educational experience.
Anyway, just wanted to give a big THANK YOU to Xboxfanj! You really are the man :good:. Thanks for your patience and determination.
Hello i think i brick my phone .... i run Triangle Away everything went fine and when i went to wipe data ... my phone turned off and wenn I try to turn it ON it only shows me Samsung Galaxy Note II GT-n7100 ... and I cant go to recovery or download mode .... it just stays on the logo .... is there anything that i can do ?
beko723 said:
Hello i think i brick my phone .... i run Triangle Away everything went fine and when i went to wipe data ... my phone turned off and wenn I try to turn it ON it only shows me Samsung Galaxy Note II GT-n7100 ... and I cant go to recovery or download mode .... it just stays on the logo .... is there anything that i can do ?
Click to expand...
Click to collapse
If you do a battery pull and hold down volume up the home key and the power button you CANT get into recovery?
Adam1422 said:
If you do a battery pull and hold down volume up the home key and the power button you CANT get into recovery?
Click to expand...
Click to collapse
Yes i cant go to recovery mode or to download mode ... some people said that it is not brick but i really dont know what is happend ... ((
plug it into your computer and see if you can get abd to recognize it. If you can, run adb reboot recover
shiftr182 said:
plug it into your computer and see if you can get abd to recognize it. If you can, run adb reboot recover
Click to expand...
Click to collapse
the problem is that my Note II dosent appear on pc ... PC show that there is connected USB ... but Phone dosent show up
beko723 said:
the problem is that my Note II dosent appear on pc ... PC show that there is connected USB ... but Phone dosent show up
Click to expand...
Click to collapse
Do you see any missing/unknown devices in Device Manager?
If so you might just need to download an updated USB driver from Samsung's website.
I'm having this exact same issue. I hope there is someone that can help figure this out. Mine occurred while trying to reroot after the update.
---------- Post added at 12:30 AM ---------- Previous post was at 12:21 AM ----------
If it helps, this is what I did.
After successfully rooting my husbands phone, he accidently updated. I've waited to try and do re-route it now since you've published a method of re-rooting. This was my first attempt at rooting ever and currently the phone only powers on to the Samsung Galaxy Note 2 screen and doesn't go any further. Here's what happened:
On Windows 7
Opened CASUAL
Received instructions to flash root.
Using Odin I tried I605_VRALJB_Restore.tar.md5, it failed to flash so I instead flashed root66_VZW_stock_system.tar.md5.
This worked fine, proceeded with CASUAL
Flashed BAVBaseline.tar.md5.
Phone began to reset and froze at Samsung Galaxy Note 2 starter screen. Waited 5 minutes no change in the screen on the phone or on CASUAL. After 30 minutes pressed power and the buttons to get into Odin, I finally unplugged. The phone is still stuck at the start screen and isn't recognized by Odin or my computer
So you're on a Verizon GN2? Just want to make sure we're talking the same phone
Also did you pull the battery yet?
Sent from my SPH-L900 using Tapatalk 2
Okay that has happened to me before.
I had to download a new stock rom and flash it via TWRP.
If you dont have TWRP Recovery mode, find a rom you can flash in normal recovery.
(To get to recovery mode, take battery out of phone, put back in and then hold "volume up, power and home button simultaneously for about 10 seconds.")
Once you have the new rom .zip file downloaded...
You have to take the SD Card out of the bricked phone and place in a different phone.
Put the different phone on the computer and put the rom on there.
When it gets copied to the ext sd, put it back into the bricked phone and proceed into recovery mode as I explained above.
You will probably have to factory reset, and then install the new rom onto the bricked phone from the ext sd card.
If you have any questions just post.
Hope it helps.
Sent from my SPH-L900 using xda premium
devynbf said:
Okay that has happened to me before.
I had to download a new stock rom and flash it via TWRP.
If you dont have TWRP Recovery mode, find a rom you can flash in normal recovery.
(To get to recovery mode, take battery out of phone, put back in and then hold "volume up, power and home button simultaneously for about 10 seconds.")
Once you have the new rom .zip file downloaded...
You have to take the SD Card out of the bricked phone and place in a different phone.
Put the different phone on the computer and put the rom on there.
When it gets copied to the ext sd, put it back into the bricked phone and proceed into recovery mode as I explained above.
You will probably have to factory reset, and then install the new rom onto the bricked phone from the ext sd card.
If you have any questions just post.
Hope it helps.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Yes.. but rhey mentioned Verizon which the locked bootloader can be bad news. We don't have that with Sprint.
Sent from my SPH-L900 using Tapatalk 2
Oh dang, didnt know Verizon had locked bootloader.
Why the heck would VZW do that, that's just messed up man...
Sent from my SPH-L900 using xda premium
And casual was mentioned. If you used casual on a sprint phone then you probably bricked it.
i have the same issue....here's what i did..
yesterday night i had rooted with samsung tool kit..flashed twrp and supersu with it. It worked fine ..was able to boot(the flash boots it ..didnt try manual booting)
today morning i had installed a icon pack from minimo icons.. it got stuck and wasnt working .,..so pulled the battery and booted and its stuck at samsung logo.. pls help!!
BTW I was able to go to recovery .. but dont know what to do from there... ! I didnt have a back up since i didnt want to keep the junk I had accumulated. I can go factory settings if thats what it takes
http://forum.xda-developers.com/showthread.php?t=2086769 If you can access recovery than flash this
billard412 said:
http://forum.xda-developers.com/showthread.php?t=2086769 If you can access recovery than flash this
Click to expand...
Click to collapse
so somehow move the 867mb file to the sd card and then flash it with recovery .. after wipe data/factory reset? thats about it ?
btw i m on sprint
That's exactly right
billard412 said:
That's exactly right
Click to expand...
Click to collapse
Alright.. giving it a go .. lets see.. fingers crossed
UPDATE: IT WORKED AND FULL ON STOCK RIGHT NOW. Thanks!
Now I need to figure out what went wrong cos I cant stay stock for long and dont want to keep doing this again and again...
Removed...I figured it out. Thanks so much y'all.
(editx2)
Just in case someone comes along like me and the above doesn't work for them.
Was getting stuck at second "Samsung" screen, could not flash rom via Odin or by recovery...couldn't even get to recovery at first.
After much round and round, here's the winning combination:
Flash stock recovery via Odin, flash twrp 2.3.1.1 (newest one with .tar file I could find) via Odin, then flash stock rom...Was that simple for me, just a lot of trial and error.
I downloaded the Jedi Mind Trick JB 2 ROM and installed it via clocwork mod recovery .. That went fine but it took me a few days to realize I didnt have a working video camera anymore on my phone.. so I thought to flash a stock ROOTed rom instead...
Then I found this threat about an updated version of Jedi Mind Trick's ROM labled JB 3.. So I wiped as much as I could in recovery and chose to format all the options it gave me in recover , Format system , data , cache , emms(or something) .. and now when I boot the phone , it shows the first flash screen , and the samsung logo starts to shimmer then it reboots back to the splash screen and repeats this process everal times before just going black and sitting there..
So I've successfully bootlooped my phone doing this..
MY PROBLEM -- I don't know how to charge my phone or connect to it to install anything else..
Is this a serious problem? How can I charge my phone to continue troubleshooting it? It still has some battery to try some things but I don't know how to hook it up to transfer any other roms to it via USB cable and PC in it's current state..
I'm very computer savvy but I'm trying to learn this phone modding stuff and I realy hope I didn't brick my phone in this process.
Can someone please help me out here? I'll be on the forums religiously until I figure this out.
What should I start doing first??
Any help would be greatly appreciated!! Thanks!
still working at it
I think I'm at the point of having to use ODIN to flash a new rom since i cannot simply copy this rom to the sdcard to use clockwork to flash it .. Am I correct on this ?
For some reason this rom I found (should be stock rooted tmobile gSII rom) does not want to open from ODIN's PDA button cause its in .zip and not .tar or anything... I'm not sure how to flash this rom with ODIN ( I'm not even 100% sure this is how its supposed to go) Any suggestions ?
phew
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
zarklon said:
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
Click to expand...
Click to collapse
Is this true? Through a recommendation (haven't done anything to my phone from rooting/flashing KANGSJUGGERNAUT2 years ago), I tried to flash CM10 and ended up with a bootloop myself. Tried flashing through ODIN but it kept crashing; does anyone know why?
Afterward, I tried to reflash it through CWM and from then on bootloops into a installation process that never completes.
For some reason my CWM turned super slow, freezes/hangs and reboots after a few minutes.
I gave the phone to a friend who does this stuff on the regular but he said my initial flash wasn't complete cause in download mode says I'm still running official? No clue.
I was told this via email/chat: "No luck, it won't even boot anymore, I think I'll just bring it back tmrw morn
10:43 PM
Sorry I'm at a wedding (yea I know random) I left my phone with coat check
OK I've narrowed down the reason but not the solution, you had an AOKP based ROM which fundamentally is based on CyanogenMod, but it wasn't correctly flashed as the phone still thought it has factory ROMs still running
11:10 PM
Clockworkmod(even though it was working before) wasn't accessing the partitions of the phone correctly so it wasn't properly wiping or flashing properly.
11:12 PM
So basically from the first time you flashed cwm it didn't flash properly then the next time you flashed using the new recovery it didn't flash anything it was supposed to do itself properly , so basically it was a chain of events in addition to a bad boot loader, that's why it never went to recovery or download mode correctly
11:13 PM
That's something that had to do with the way the phone was built meaning you may of had a bad bootloader from the very begin and are now feeling the synptoms
Basically, and I would hate to be the reason or partially the reason you have a dead phone, basically it was a matter of coincedencr that it happened as this could of happened at anytime, once you have a bad boot loader its pretty much down hill from there"
Any helpful insight as how I can rectify this? is my phone truly dead? Sorry about the quoted format, it was copied and pasted.
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
tronmech said:
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
JahJahLoO said:
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
Click to expand...
Click to collapse
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
sam.balia1012 said:
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
Click to expand...
Click to collapse
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
dont give up
JahJahLoO said:
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
Click to expand...
Click to collapse
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
sam.balia1012 said:
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
Click to expand...
Click to collapse
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
JahJahLoO said:
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
Click to expand...
Click to collapse
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
sam.balia1012 said:
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
Click to expand...
Click to collapse
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
JahJahLoO said:
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
Click to expand...
Click to collapse
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
sam.balia1012 said:
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
Click to expand...
Click to collapse
It might as well have... :crying:
Last night I installed geefree on my phone from the app store and used it to install TWRP. I downloaded a nightly CM11 and an appropriate gapps. Using geefree I rebooted to recovery (never figured out the button combination to boot to recovery "naturally") and installed both of the zips. This could be where I made my mistake, I installed both at the same time.
Now my phone loops, displaying the LG logo for a few seconds, then shutting off and rebooting before repeating the process. I can't seem to get it to go into download mode or the recovery menu. I've tried power+up, power+down, down+up and each of those while plugging the device in, etc. I can get the device to a hardware key control mode, though it doesn't seem too useful.
How can I save my phone? This forum has been a great resource in the past and I'm very grateful for the many tutorials I've followed rooting other devices. Hopefully you guys can save the day once again!
Volume up plus power is how to access recovery on sprint.
What stock sw version were you on before you flashed cm?
Did you wipe data before flashing?
Sent from my LG-LS970 using xda app-developers app
I was using stock 4.2.2, I believe. I didn't wipe the data (shame on me), a bad habit that I picked up from my first rooted device, the Samsung Moment. It didn't ever matter on that one, afaik. Thanks for the reply!
Edit: Volume up and power whether plugged in or not takes me to the hardware key control mode screen.
Second Edit: http://forum.xda-developers.com/showthread.php?t=2432476&page=35 I also found this thread where someone seems to be experiencing similar issues and they fix it with "LG Utility." Is that a PC application? It's a little vague to google, but I've been trying!
I have a bootloop issue every time i flash a rom i have to wipe all but sd flash roms and gapps the i do a restore from twrp and oly restore my boot image only and they boot no prob
I'm kind of starting to suspect my power button doesn't work at all for whatever reason. I have a lot of difficulty getting the phone to shut down, then it doesn't seem to easily power up. It's a strange collection of problems. Would a Sprint repair place be able to fix this?
If they have parts on hand if not either a swap out or a sendoff
Same problem here - bootloop and no download mode - CWM works! - urgently need help
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Device is recognized but can´t be mounted - bricked forever?
Parinibbana said:
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Click to expand...
Click to collapse
I tried a few things on Linux.
After terminal-command "ls /dev/sd*" when the device is unplugged from the computer I get "/dev/sda".
When the device is connected via USB, I get: "/dev/sda /dev/sdb"
So sdb is my LG G2.
So I went on to the next command: "gdisk -l /dev/sdb"
As a result I get: "Problem opening /dev/sdb for reading! Error is 123."
Does it mean that the phone isn´t mounted or what? Now I´ve connected my phone to another Linux machine with the same result. It is recognised (p.e. as sdd), but there is no sdd1. Seems as if it is recognized, but can´t be mounted. Does that mean my device is bricked for good? That´s it?
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb into the phone first then hold VOL+ and plug into usb port on the computer.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, it will shut off eventually!!
plug the phone in while in download mode to install drivers and set com ports, then unplug before you begin your flash with LGFlashTool, hope this helps you out.
Cronic2009 said:
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb in first then hold VOL+ and plug into usb port.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, hope this helps
Click to expand...
Click to collapse
Thanks Cronic2009 for your advice.
There are, however, szenarios where download-mode is not accessible any more. Neither by using the hardware-keys, nor by using the adb-command.
After four days of resarch and a lot of trial and error, I finally unbricked my F320L using the two adb-commands outlined at the beginning of that thread: http://forum.xda-developers.com/showthread.php?t=2451696
Worked like a charm.
Thanks everyone for your advice.
no problem buddy, glad you got it figured out, good luck to you from here on out!
FYI, that link doesn't work
I just wanted to ask anyone who might know, since the bootloader of the LS980 is locked, we cannot "break" this correct, so no matter what commands we decide to run through root, we cant touch the true bootloader there for LS980 fail safe? (Besides Acts of God, EMP, ect)
Cronic2009 said:
no problem buddy, glad you got it figured out, good luck to you from here on out!
Click to expand...
Click to collapse
Thanks for letting me know. I corrected the link in my previous post.
Be sure if you use a aosp based rom to flash the ZV8 modem. Your can use dr87 or furnance kernals after you flash the zva modem althought i have encountered soft brick due to this.
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
pitbullmommy45245 said:
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
Click to expand...
Click to collapse
Thank You for sharing you fixed your issue pittbullmommy but the link you posted points back to a post about a failed run on LGFlashTool, will you please fix the link and point it to the post/guide you used to fix your phone, it may help others stuck in a similar situation, glad to hear you got it fixed and working, best of luck with it from here on out!
Hi all
was just about to start a new thread but didn't want to get into trouble..anyway I am in need of some assistance please.my ls980 has been bricked for some time now been searching all over the internet for a solution to be stuck back at square one.found this video on youtube which is pretty much exactly what my phone is doing.I have used lg flash tool to revert to stock and still nothing I lost root doing that but last night,I managed to regain root access I have no idea how but it happened when i clicked ioroot batch file i went into download mode and it stated bottom left ROOTED in red so i managed that but that is it still doing what is being shown in the video its on youtube
watch?v=PjLF-pBhZSY
please if anyone has the know how I would like to fix this phone rather then bin it thank you all happy 4th everyone
After using tot and flash tool to get back to stock, did you try going into stock recovery and do a factory data reset? I know it sounds stupid especially after a tot but try it. Couldn't hurt
Sent from my LG-LS980 using Tapatalk
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Yes sir I've tried that and more to no avail is there anything I can do through adb I'm on stock recovery phone doesn't stay on long enough to install anything
sarfdawg said:
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Click to expand...
Click to collapse
You ever get her fixed?