Went to root it had no problems between flashing twrp and boot omg I was bricked at fastboot recovery go to fastboot commands I found on this site now can't turn on won't fastboot with factory cable what do I do kindle fire
jaer418 said:
Went to root it had no problems between flashing twrp and boot omg I was bricked at fastboot recovery go to fastboot commands I found on this site now can't turn on won't fastboot with factory cable what do I do kindle fire
Click to expand...
Click to collapse
What model do you have?
Related
hi guys, i really need help, i factory reset my kindle to put the stock amazon interface and when i booted it up it got stuck on the kindle fire logo, i don't have Firefirefire or tmrp, im trying to install it using KFU but it doesn't work, my computer found the adb but i cant copy anything to it.
Please help me to fix the problem
thanks.
Salman_Android said:
hi guys, i really need help, i factory reset my kindle to put the stock amazon interface and when i booted it up it got stuck on the kindle fire logo, i don't have Firefirefire or tmrp, im trying to install it using KFU but it doesn't work, my computer found the adb but i cant copy anything to it.
Please help me to fix the problem
thanks.
Click to expand...
Click to collapse
If this doesnt work http://forum.xda-developers.com/showthread.php?t=1430038 you will need to aquire a factory cable so you can fastboot flash fff.bin and twrp image in order to then flash a rom because your system software is likely broken factory cable here http://forum.xda-developers.com/showthread.php?t=1392693 its possible you are stuck in fastboot but I doubt it if you get lucky and that is the case shift+ right click on the tools folder in kfu select open command window here power your device off completely leave it unplugged type fastboot -i 0x1949 getvar product when it says waiting for device plug in your powered off kindle it should then power on in fastboot mode if you get the response product: kindle then type fastboot -i 0x1949 oem idme bootmode 4000 it will say okay hopefully the type fastboot -i 0x1949 reboot it should then reboot in normal mode
My kindle fire runs on Rooted Kindle Fire stock ROM downloaded from http://forum.xda-developers.com/showthread.php?t=1569298.
Yesterday I tried to install twrp using KFU0.9.6 and it says the MD5 check sum failed deleting the files.
Then it worked fine. After that i turn it off my Kindle fire. And I turn it on after some time. From that moment it got stuck in Kindle Fire boot screen.
Then I tried to connect my device to PC and launched KFU0.9.6 and it is saying my Device is offline
Could someone help me to resolve this issue???
Hard boot then boot into recovery.....then flash your stock ROM backup. You made a backup, right?
Sent from my Amazon Kindle Fire using xda app-developers app
Still not booting up
younggeek1 said:
Hard boot then boot into recovery.....then flash your stock ROM backup. You made a backup, right?
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
I tried this but still it got stuck in the bootloader screen itself.
snaveenraja said:
I tried this but still it got stuck in the bootloader screen itself.
Click to expand...
Click to collapse
Im having the same problem... How can i boot into recovery mode if the Kindle Fire utility isnt detecting the device unless its literally on?
try this
Hi
I had the same problem... Try this:
Download the 'Kindle Fire Utility' unzip it and run install_drivers.bat
Plugin the kindle and make sure nothing is unrecognized in the Device Manager
Open a command prompt and enter the following two lines
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
(If fastboot cannot be found switch to the "kindle fire Utility" folder into the Tools directory)
Afterwards you can run the utility and install the latest "TWRP Recovery" and "FireFireFire". I've been stuck there in the installation: Don't plug-out your kindle, just reboot it a few times (keep the power-button pressed for at least 10sec)
Hope this helpes
Ok.
i installed TWRP 2.2.2.1 and flash gede Rom Cm9 successfully.But after ,i can't boot into recovery again.I turn off and turn on but kindle fire only boot Cm9, KFU 0.9.6 adb offline, gede Rom cm9 have issue can't connect usb Mass Storge(idiot rom).Please help me
Please help me!!!!!!!!!!!!!!!!!!!!!!!!!!!
tiencoi1988 said:
Ok.
i installed TWRP 2.2.2.1 and flash gede Rom Cm9 successfully.But after ,i can't boot into recovery again.I turn off and turn on but kindle fire only boot Cm9, KFU 0.9.6 adb offline, gede Rom cm9 have issue can't connect usb Mass Storge(idiot rom).Please help me
Click to expand...
Click to collapse
In terminal emulator enter the following:
Code:
su
idme bootmode 5000
reboot
OR
Turn your device off, enter the following at the command prompt and restart the device.
Code:
fastboot -i 0x1949 oem idme bootmode 5001
fastboot reboot
"That's a special kind of stupid. The kind that makes me laugh."
ok, i re-unistall driver Kindle Fire and KFU 0.9.6 adb nline, i boot into recovery mode (TWRP 2.2.2.1)from KFU,but after i install Jelly Bean CM10.1 Linaro-0449 (7-1-2013),and flash gapps 27/06/2012 jb(may be wrong gapps),then boot have error "unfortunately,setup wizard has stopped",i reboot but can't boot into recovery again. Please help me
tiencoi1988 said:
ok i boot into recovery mode,but after i install Jelly Bean CM10.1 Linaro-0449 (7-1-2013),and flash gapps 27/06/2012 jb(may be wrong gapps),while boot have error "unfortunately,setup wizard has stopped",i reboot but can't boot into recovery again. Please help me
Click to expand...
Click to collapse
Very typical of the wrong gapps package or not wiping partitions before installing. Most likely wrong gapps package.
i know,i know.please help me boot into recovery
tiencoi1988 said:
i know,i know.please help me boot into recovery
Click to expand...
Click to collapse
What does your boot logo look like? (color)
I feel your Pain My Friend :crying:
tiencoi1988 said:
i know,i know.please help me boot into recovery
Click to expand...
Click to collapse
Did you find a solution?
Hi everyone, im just new here in kindle fire 2 dev page. My KF2 was stuck at bootloop specifically at 'kindle fire' logo. I followed exactly what hashcode's tutorial on how to install twrp and CM. I don't have fastboot cable but i did tried to boot it at fastboot mode, i was able to fastboot it followed until flash the twrp then fastboot reboot. then it just stuck there, i can't use adb and now I'm building my own factory cable, but after I finished it nothing happens.
How can I fix this?
If my cable wiring was correct, should it boot to fastboot mode after I plugged it?
any help will greatly appreciated thanks.
+1 here
I got a fast boot cable, I can access twrp just need to restore it and it does not work...
I used KFFirstAide with no success all I get is solid kindle fire logo when trying to boot normally.
Hi, I was running CM11 on a rooted Kindle Fire HD 8.9 happily but decided to take the CM12 nightly and it's not gone well.
It installed but wasn't running correctly, here's where I made my mistake. Instead of waiting until I had a PC to hand, I did a factory reset on the kindle itself (i'm an idiot!).
Now, the kindle will start up into fastboot mode and take some commands but that's it. No recovery, no adb.
I have the android SDK installed along with google usb drivers and the amazon kindle usb drivers. The device appears on the PC (no yellow triangle, I'm running windows 8.1 and the driver is signed).
With fastboot, I can flash a boot and recovery image but I can't then restart the device in recovery mode or standard boot.
a fastboot reboot stays in fastboot mode. any volume and power button combinations won't take it into recovery.
i tried fastboot oem unlock but that doesn't get a response from the device.
I have the kindle SR tool utility (v 1.3.5). It can flash the images to the device but any attempt to reboot will always take it back into fastboot.
I've read countless articles but I'm now stuck. Have I killed my fire?
Thanks, Mike
"fastboot -i 0x1949 oem recovery" should reboot your kfhd into recovery. From there you can wipe system, recovery and data and re-install recovery, cm11 and gapps assuming the zip files are still on your device. Or you can erase and re-flash everything using fastboot commands. If all else fails you can first return it to stock KFHD OS using the system recovery tool. All you need is to get it into fastboot mode which it sounds like you can.
mico1411 said:
Hi, I was running CM11 on a rooted Kindle Fire HD 8.9 happily but decided to take the CM12 nightly and it's not gone well.
It installed but wasn't running correctly, here's where I made my mistake. Instead of waiting until I had a PC to hand, I did a factory reset on the kindle itself (i'm an idiot!).
Now, the kindle will start up into fastboot mode and take some commands but that's it. No recovery, no adb.
I have the android SDK installed along with google usb drivers and the amazon kindle usb drivers. The device appears on the PC (no yellow triangle, I'm running windows 8.1 and the driver is signed).
With fastboot, I can flash a boot and recovery image but I can't then restart the device in recovery mode or standard boot.
a fastboot reboot stays in fastboot mode. any volume and power button combinations won't take it into recovery.
i tried fastboot oem unlock but that doesn't get a response from the device.
I have the kindle SR tool utility (v 1.3.5). It can flash the images to the device but any attempt to reboot will always take it back into fastboot.
I've read countless articles but I'm now stuck. Have I killed my fire?
Thanks, Mike
Click to expand...
Click to collapse
In my situation (Kindle fire HD 8.9 amazon OS 8.1.5) after install TWRP 2.6.0.0, the device is not loaded (always orange logo kindlefire at all) me helped Wipe> format data, after I then sent image cm-11 for devices, `adb push cm-11.zip /sdcard/`, and wipe cache and install cm-11 are successful.
Installing TWRP only for fastboot mode, in the fastboot mode `adb` command dont work, only `fastboot...........` command.
I hope something helped.