I have a sprint note 2 that i had flashed to boost. I just rooted and put on a Custom recovery (TRP). If i Flash a custom rom will i have to reflash to boost? Or will it still work on boost?
Thanks
Wont affect the boost settings
Sent from my SPH-L900 using xda premium
You should be good flashing any custom ROM you choose. If you do run into any problems just re-flash back to boost.
Thanks guys I flashed to Jellybomb 20 and it works fine besides hangouts stops working and the voice recorder does not work right.
Related
Hi, I just flashed cm10.1 and after booting it tried to activate but I got error 16, does anyone know how to fix this?
You have to call Sprint. It is a network flag that means the network thinks you have 2 phones using the same ESN in other words cloned. It could be a network tower echo.
Sent from my SPH-L710 using xda premium
I called and they were trying to have me check some menu by dialing ##54xxxxx# I don't really remember the code but it didn't do anything, then they wanted me to update the profile but that option isn't on the rom. Should I just tell them I have a custom rom?
You can't use dialer codes on a CM ROM. You have to be on stock or a TW ROM for them to work.
Sent from my SPH-D700 using Tapatalk 2
frostedunit said:
You can't use dialer codes on a CM ROM. You have to be on stock or a TW ROM for them to work.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
This ^^^^^. If you tell them you have a custom ROM they will not help you. You will either need to find and set up the stock ROM flash from sd card or back up your ROM and flash an MTD TW ROM like the People's ROM.
XDA Moderator
So how do other people run the rom without running into this issue?
shadow1892 said:
So how do other people run the rom without running into this issue?
Click to expand...
Click to collapse
Tower echoes are rare and once you flash back to TW and get it fixed, you should be good to flash whatever you like.
Sent from my SPH-D700 using Tapatalk 2
Oh ok thanks!
I bet you just have to sync your profile again. Do what Kenny suggested and backup your CM rom, flash an MTD TW rom. Then you can run update PRL and Profile.
If a sprint galaxy s3 is flashed to boost what roms can i flash? sorry dont want to mess it up.
Yes you can. You just need to make some changes in settings to get MMS to work.
Sent from my SPH-L710 using Tapatalk 2
what are the changes? sorry i just havent done this before thanks for the help in advance
I have a Sprint flashed to Iusacell here in Mexico, and I flash Sprint ROM's, its okay, it wont mess with your number/data/signal.
I dont use the MMS so I cant give you advice on that, but im sure you can flash without problems
Hi, I have gotten myself into a sticky situation and I could use a little advice. I rooted my SGH-I317 Note 2 (AT&T) and installed a custom ROM. After installation, I noticed that my network connection was unavailable and I could not make/receive calls etc. My sys restore fails with the MD5 error, so I was looking for a solution to make the fix happen. I tried installing a stock ROM but I'm still showing "unknown" baseband version so I'm assuming I need a ROM with my correct firmware? Any help is appreciated.. 7:30am here and been working on this all night. I need my phone! : )
juhs said:
Hi, I have gotten myself into a sticky situation and I could use a little advice. I rooted my SGH-I317 Note 2 (AT&T) and installed a custom ROM. After installation, I noticed that my network connection was unavailable and I could not make/receive calls etc. My sys restore fails with the MD5 error, so I was looking for a solution to make the fix happen. I tried installing a stock ROM but I'm still showing "unknown" baseband version so I'm assuming I need a ROM with my correct firmware? Any help is appreciated.. 7:30am here and been working on this all night. I need my phone! : )
Click to expand...
Click to collapse
Im pretty sure if you find the correct modem for your note (at&t) and flash that in recovery it should get your phone calls working again.
Sent from my SPH-L900 using Tapatalk 2
Sounds like ypu flashed a sprint rom flash a at&t one and ypull be good
Sent from my SPH-L900 using xda app-developers app
budde2 said:
Sounds like ypu flashed a sprint rom flash a at&t one and ypull be good
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I'm looking for a good one.. My data connection is working, but it goes in and out. System performance can be a little choppy also. Truly appreciate the comments and suggestions.
This is my first post. Whenever i try to flash a sprint version of any rom on my gs3 from boost my LTE doesn't work. The only way my data will work is if i switch it to CDMA which means no 4g. I even tried dialing ##72786# to reset my data connection but that didn't work either. Does anyone know of a solution to this?
http://androidforums.com/boost-mobi...s-root/772094-working-roms-mods-boost-s3.html
this link will have a lot of answers for you. always update your profile/prl after a flash. im on boost and running the sprint moar rom. everything works for me
Thank you. Ill give it a try later on.
Sent from my SPH-L710 using xda app-developers app
I tried the link you gave me. It had a zip file called piggyback.zip. I tried that but stil no results. I also cant update the prl or profile because it says connection error code 6. Im not even getting 3g. I tried MOAR and the peoples rom
Sent from my GT-N5110 using xda app-developers app
kp20kp said:
I tried the link you gave me. It had a zip file called piggyback.zip. I tried that but stil no results. I also cant update the prl or profile because it says connection error code 6. Im not even getting 3g. I tried MOAR and the peoples rom
Sent from my GT-N5110 using xda app-developers app
Click to expand...
Click to collapse
Did you try using Odin to go stock?
Sent from my SPH-L710 using xda app-developers app
I finally tried something that I never did before. Before flashing the rom I wiped my dalvik and cache partition. When I did that everything worked fine. 3g and 4g is working. I'm currently on the peoples rom Thanks for the help.
Sent from my SPH-L710 using xda app-developers app
bricker1 said:
http://androidforums.com/boost-mobi...s-root/772094-working-roms-mods-boost-s3.html
this link will have a lot of answers for you. always update your profile/prl after a flash. im on boost and running the sprint moar rom. everything works for me
Click to expand...
Click to collapse
I was wondering did you flash stock Sprint rom first? Also did you have to do the MMS fix? I am trying to flash a custom rom for my mothers new S3 but I am not really too sure about it since it is on Boost. If I wanted to flash back to stock, would I just use the stock Sprint firmware again? Did you flash 4.3 or an earlier version? I heard that the new 4.3 update has the Knox built in like the newer devices but not too sure if what I read was correct
girron said:
I was wondering did you flash stock Sprint rom first? Also did you have to do the MMS fix? I am trying to flash a custom rom for my mothers new S3 but I am not really too sure about it since it is on Boost. If I wanted to flash back to stock, would I just use the stock Sprint firmware again? Did you flash 4.3 or an earlier version? I heard that the new 4.3 update has the Knox built in like the newer devices but not too sure if what I read was correct
Click to expand...
Click to collapse
yes im on the 4.3 moar rom. since its a boost phone there are boost/vm software on android forums stickies. no im knox free
http://androidforums.com/boost-mobi...exed-deodexed-virgin-mobile-boost-mobile.html
there is your return. yes you will need to fix mms. moar is knox free
---------- Post added at 06:41 AM ---------- Previous post was at 06:34 AM ----------
girron said:
I was wondering did you flash stock Sprint rom first? Also did you have to do the MMS fix? I am trying to flash a custom rom for my mothers new S3 but I am not really too sure about it since it is on Boost. If I wanted to flash back to stock, would I just use the stock Sprint firmware again? Did you flash 4.3 or an earlier version? I heard that the new 4.3 update has the Knox built in like the newer devices but not too sure if what I read was correct
Click to expand...
Click to collapse
i flashed moar right from the boost rom. yes youll fix mms yes moar 710 is 4.3 and knox free
http://androidforums.com/boost-mobi...exed-deodexed-virgin-mobile-boost-mobile.html
this is return to stock
flashing boost mobile with sprint stock rom
kp20kp said:
This is my first post. Whenever i try to flash a sprint version of any rom on my gs3 from boost my LTE doesn't work. The only way my data will work is if i switch it to CDMA which means no 4g. I even tried dialing ##72786# to reset my data connection but that didn't work either. Does anyone know of a solution to this?
Click to expand...
Click to collapse
Please just confirm in clear terms for me, you flashed a boost mobile with official sprint stock rom??? i really need this information. please
alemosman said:
Please just confirm in clear terms for me, you flashed a boost mobile with official sprint stock rom??? i really need this information. please
Click to expand...
Click to collapse
That's correct. If your data doesn't work you'll have to change your APN settings since most of these ROMs are for the sprint s3 and not the boost mobile. I flash ROMs a lot and sometimes the data work so I won't have to change my APN. If you need help with that I can help
kp20kp said:
That's correct. If your data doesn't work you'll have to change your APN settings since most of these ROMs are for the sprint s3 and not the boost mobile. I flash ROMs a lot and sometimes the data work so I won't have to change my APN. If you need help with that I can help
Click to expand...
Click to collapse
thanks very much for your reply, you are the right person ive been looking for about a month now. i have downloaded a sprint stock rom JB 4.3 from sammobile for which id be flashing to my new boost mobile s3.
the essence here is am in Ghana with this device and obviously i have to change carrier because i cant have boost service here. My phone is still fresh in box and locked for that matter (only upgraded to JB 4.3 OTA). I would just like to unlock it for NAM configuration any help? Do i realy need to flash a sprint rom first?
version (*#1234#)
AP: L710VPUBMK5
CP: L710VPUBMK5
CSC: L710SPTBMK5
PLS HELP ME UNLOCK THIS DEVICE
I really don't know how to unlock a phone but I wouldn't mess with your phone since you did the OTA update to get 4.3. You have Knox now and that's bad to have. You can mess your phone up and void your warranty if you do anything with that knox
Sent from my SPH-L710 using xda app-developers app
Hello all,
I just have a few questions regarding my note 2 sgh-i317 which I've just received from ebay on Thursday. As soon as I got it I rooted and flashed cymod 10.2 because up until this point I didn't want anything stock on my previous galaxies. Before I flashed though, I messed around with s-note and was highly dismayed that I'm not able to mount touchwiz apps. I tried changing apk permissions through es and move to system/app folder to no avail. Then I thought I would settle for Papyrus since thats what my wife has on her rooted/omni rommed note 10.1. I'm not happy with that app or the fact that there is not a 4.4.2 update for the note 2s yet. I'm thinking the only way to get s pen features to work with the good apps it was designed to work with, is to go back to stock.Any input or suggestions would be greatly appreciated as well as the thread link for the stable 4.3 stock rom download as TWRP didn't back it up right before flashing.
Thanks in advance
omen
Galaxy Note II-sgh-i317 Root/CyMod 10.2
Galaxy SIII-sgh-i747 Root/CyMod 10.3
iPhone 4S......wait no I did not just go there:silly:
I was on an aosp and flashed 4.3 alliancerom. Like it a lot. Because of the whole bootloader thing with 4.3 and that I didn't update mine my wifi didnt work as I was told it wouldn't. So I heard somewhere to flash a kernel called devil kernel and it made everything work like a charm not to mention the kernel is awesome. It has a app in the playstore to manage it. It also works on both touch wiz and aosp. The best thing is it also allows for dual boot between aosp and touchwiz. I have a backup that I access from cwm. I go back and forth between CyanogenMod and touchwiz all the time.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Jsouthernindiana said:
I was on an aosp and flashed 4.3 alliancerom. Like it a lot. Because of the whole bootloader thing with 4.3 and that I didn't update mine my wifi didnt work as I was told it wouldn't. So I heard somewhere to flash a kernel called devil kernel and it made everything work like a charm not to mention the kernel is awesome. It has a app in the playstore to manage it. It also works on both touch wiz and aosp. The best thing is it also allows for dual boot between aosp and touchwiz. I have a backup that I access from cwm. I go back and forth between CyanogenMod and touchwiz all the time.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I can't get any other kernels too flash until I unlock the bootloader though right? Mine had the OTA and I'm still on the MK6 baseband. I found 2 UCUBMK6 Param tar files which are supposed to work but I'm still seeing and unchanged flash count and knox trip displayed while in download mode. I really want to go to alliance and just am not sure what my next step should be. Thanks for your previous input and devil kernel does sound sweet...hopefully I'll get to enjoy it soon:fingers-crossed::fingers-crossed:
omenbass said:
I can't get any other kernels too flash until I unlock the bootloader though right? Mine had the OTA and I'm still on the MK6 baseband. I found 2 UCUBMK6 Param tar files which are supposed to work but I'm still seeing and unchanged flash count and knox trip displayed while in download mode. I really want to go to alliance and just am not sure what my next step should be. Thanks for your previous input and devil kernel does sound sweet...hopefully I'll get to enjoy it soon:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Negatory. Flashing kernel and Alliance will work.
You're stuck on the MK6 bootloader, which is fine. DO NOT try to flash a bootloader !