I want to install the Blazer ROM (http://forum.xda-developers.com/showthread.php?t=1363071), but I'm new to rooting and flashing ROMs onto my device as this is my first Android device ever.
I was watching qbking77's video on installing the Blazer ROM, and he said that I needed CWM 5.0.2.7, but I believe he also said somewhere in the comments on some of his other videos that Rouge doesn't work as well as the (normal?) CWM 5.0.2.7? Is this true? Because I followed Zedomax's tutorial to root and install CWM and he uses Rogue, so I was wondering if this would mess with my phone at all.
Also, I heard that using the stock EL29 rom is usually unstable when installing ICS ROMs and that I should flash EL26 if I plan on using any ICS ROMs. Would it also be bad to try flashing the Blazer ROM without flashing an EL26 ROM and/or regular CWM or can I just go ahead and flash Blazer with my stock rooted EL29 E4GT with Rogue CWM 5.0.2.7?
Long story short: Can I just flash the Blazer ROM from stock EL29 Rooted with Rogue CWM 5.0.2.7 or do I need/should to do other things before attempting to flash this ROM? I've heard bad things about Rogue CWM and EL29 vs EL26 and regular CWM.
Thanks.
CWM won't be too picky, I have used standard cwm attached below and have not had problems with any flash so far, except CM9 {alot of people do, you will learn that}, anyway, follow OP install instructions and you will be fine, make sure to grab Calk's Format script in the OP. You should be on your new home screen in no time at all. If you get any FC's at first, try going back to CWM and Fix Permissions, Reboot and should be good.
KloudIX said:
CWM won't be too picky, I have used standard cwm attached below and have not had problems with any flash so far, except CM9 {alot of people do, you will learn that}, anyway, follow OP install instructions and you will be fine, make sure to grab Calk's Format script in the OP. You should be on your new home screen in no time at all. If you get any FC's at first, try going back to CWM and Fix Permissions, Reboot and should be good.
Click to expand...
Click to collapse
So I shouldn't need to do anything other than get standard CWM (aside from the OP's instructions, of course)? Also, how can I go about getting standard CWM and getting rid of Rogue?
And what is an "FC?" Sorry, I don't know all the terminology yet, but I read and watch a lot of videos daily about all of this stuff to try and learn as much as possible. His instructions just seem very vague for people that are new to rooting and installing custom ROMs.
organizedConfoosion said:
So I shouldn't need to do anything other than get standard CWM (aside from the OP's instructions, of course)? Also, how can I go about getting standard CWM and getting rid of Rogue?
And what is an "FC?" Sorry, I don't know all the terminology yet, but I read and watch a lot of videos daily about all of this stuff to try and learn as much as possible. His instructions just seem very vague for people that are new to rooting and installing custom ROMs.
Click to expand...
Click to collapse
Correct, download the file I attached, it has EL26, its rooted and the CWM is present - Make sure you do this with Odin 1.85, put it in the PDA position and uncheck the AUTO RE-BOOT option. You will then have to wait for it to Pass, but should only be a few seconds, unplug, pull bat and reboot holding Volume+ and Power.
FC= Force Close
They seem vague at first, but mainly due to alot of jargon your not familiar with yet.
Anyway, I hoped I helped you, if I did hit the thanks button.
KloudIX said:
Correct, download the file I attached, it has EL26, its rooted and the CWM is present - Make sure you do this with Odin 1.85, put it in the PDA position and uncheck the AUTO RE-BOOT option. You will then have to wait for it to Pass, but should only be a few seconds, unplug, pull bat and reboot holding Volume+ and Power.
FC= Force Close
They seem vague at first, but mainly due to alot of jargon your not familiar with yet.
Anyway, I hoped I helped you, if I did hit the thanks button.
Click to expand...
Click to collapse
Okay, and where can I find Odin 1.85? Or can I just use the exact same Odin program that I rooted with (using Zedomax's root method on SPH-D710 to root to stock EL29)?
And, let me see if I'm understanding this all correctly (please be patient with me ):
1. I run Odin 1.85
2. click PDA (I'm assuming is an option/button in Odin), and uncheck Auto-boot
3. select the EL26 file you included and click start(?)
4. wait for it to pass, then unplug the phone (should still be turned on at this point?)
5. pull bat (I assume you mean select the file for EL26 included in e4gtauto.zip Zedomax provided?)
6. reboot by going into CWM and selecting reboot.
Correct?
And I shouldn't have to do anything to delete Rogue CWM? Just these above steps?
organizedConfoosion said:
Okay, and where can I find Odin 1.85? Or can I just use the exact same Odin program that I rooted with (using Zedomax's root method on SPH-D710 to root to stock EL29)?
And, let me see if I'm understanding this all correctly (please be patient with me ):
1. I run Odin 1.85
2. click PDA (I'm assuming is an option/button in Odin), and uncheck Auto-boot
3. select the EL26 file you included and click start(?)
4. wait for it to pass, then unplug the phone (should still be turned on at this point?)
5. pull bat (I assume you mean select the file for EL26 included in e4gtauto.zip Zedomax provided?)
6. reboot by going into CWM and selecting reboot.
Correct?
And I shouldn't have to do anything to delete Rogue CWM? Just these above steps?
Click to expand...
Click to collapse
I am not sure where the 1.85 odin file is on XDA, but I have attached, below, still learning my way around here too.
SS= Screen Shot - See attached.
your steps are good, except I meant pull battery, not really necessary, but I usually forget to move my files to my sd card, so I end up pulling it anyway.
Once you get the PASS in odin, you will then hold in power for 8 seconds and hold Volume+ button at the same time {or pull battery and do same}.
That will put you into CWM, then go to install zip from SD > Choose Zip File from External SD, grab your Calkulin file, run it, then go back and run the ROM file and Reboot!
You should be good to go from there.
KloudIX said:
I am not sure where the 1.85 odin file is on XDA, but I have attached, below, still learning my way around here too.
SS= Screen Shot - See attached.
your steps are good, except I meant pull battery, not really necessary, but I usually forget to move my files to my sd card, so I end up pulling it anyway.
Once you get the PASS in odin, you will then hold in power for 8 seconds and hold Volume+ button at the same time {or pull battery and do same}.
That will put you into CWM, then go to install zip from SD > Choose Zip File from External SD, grab your Calkulin file, run it, then go back and run the ROM file and Reboot!
You should be good to go from there.
Click to expand...
Click to collapse
Alright, so after following the steps that you gave me, I just need to copy all of the files the OP posted onto my SD card and follow his steps?
Sorry I'm so bad at this, but I really do appreciate you being so patient with me. You're pretty much one of the only people that has actually attempted to help me with a question I've had.
One last question: I don't need to do anything to remove Rogue CWM before following your steps, do I? I didn't want to try anything until I was sure about this because I'm incredibly scared of bricking my phone as this is my first time ever doing anything like this.
Thank you so much for your help so far, though. I've thanked all of your posts along the way, and I really do appreciate it.
organizedConfoosion said:
Alright, so after following the steps that you gave me, I just need to copy all of the files the OP posted onto my SD card and follow his steps?
Sorry I'm so bad at this, but I really do appreciate you being so patient with me. You're pretty much one of the only people that has actually attempted to help me with a question I've had.
One last question: I don't need to do anything to remove Rogue CWM before following your steps, do I? I didn't want to try anything until I was sure about this because I'm incredibly scared of bricking my phone as this is my first time ever doing anything like this.
Thank you so much for your help so far, though. I've thanked all of your posts along the way, and I really do appreciate it.
Click to expand...
Click to collapse
Correct, once you flash the el26 file from above, Rogue will be gone, you will reboot to recovery, flash Calkulin, flash ROM, reboot, rejoice!
Not a problem, I understand how it can be frustrating, still waiting on an answer to my question I posted to the XDA.
Good luck and remember google is your friend too! Just search XDA and then what your looking for and you will likely get an answer somehow.
KloudIX said:
Correct, once you flash the el26 file from above, Rogue will be gone, you will reboot to recovery, flash Calkulin, flash ROM, reboot, rejoice!
Not a problem, I understand how it can be frustrating, still waiting on an answer to my question I posted to the XDA.
Good luck and remember google is your friend too! Just search XDA and then what your looking for and you will likely get an answer somehow.
Click to expand...
Click to collapse
It worked, thank you so much! I'm now enjoying this wonderful Blazer ICS ROM thanks to you.
I've "thanked" your post again, and I just wanted to say again how much I appreciate your help tonight. You have no idea how long I've been waiting to get help on all sorts of different ROMs (not necessarily here, but in other places - it's been about 2 and a half weeks and basically no one has replied to me other than Qbking once and Zedomax once), so once again, I thank you.
Cheers, friend! Good luck on your question, I'd attempt to help, but I clearly don't know much about Android. XD I wish I could help!
organizedConfoosion said:
It worked, thank you so much! I'm now enjoying this wonderful Blazer ICS ROM thanks to you.
I've "thanked" your post again, and I just wanted to say again how much I appreciate your help tonight. You have no idea how long I've been waiting to get help on all sorts of different ROMs (not necessarily here, but in other places - it's been about 2 and a half weeks and basically no one has replied to me other than Qbking once and Zedomax once), so once again, I thank you.
Cheers, friend! Good luck on your question, I'd attempt to help, but I clearly don't know much about Android. XD I wish I could help!
Click to expand...
Click to collapse
No prob! Glad its working for you. You're gonna be hooked.... you just get sucked in once you figure out a little bit.
My E4gT - Running: Paranoid Android v1.6 and L O V I N I T !
KloudIX said:
No prob! Glad its working for you. You're gonna be hooked.... you just get sucked in once you figure out a little bit.
My E4gT - Running: Paranoid Android v1.6 and L O V I N I T !
Click to expand...
Click to collapse
Haha, I bet. I'm already loving this ROM, the theming is really minimalistic, everything is stable, and I can just install Apex Launcher if I want the stock ICS experience. I'm here at my parents house for summer break, and I live in Florida for college. I don't really have access to a windows PC there since I have a Macbook Pro (courtesy of Full Sail University), and I didn't really want to deal with all the bs you have to go through on a mac to root the phone and stuff so I just waited for summer break, so getting your help this early in my break was amazing because this means I can try out other ROMs now that I know what to do if I feel so.
I'll be using your tutorial for the rest of my family's phones as well since they all got incredibly interested when I told them I could update the phone for them before Sprint did, haha. Plus, my mom loves the idea of the Wifi tethering for free, so she was pretty much sold the second I said that.
Thanks again! I already love Android 100x more than iOS (I'm coming from an iPhone) because of the ability to customize literally anything about the OS.
You are most definitely welcome, I would be more than happy to help in the future too, but do try Nova Launcher, its quite slick, easy to customize and I haven't seen a bit of lag out of it period.
Im posted up in my basement working, while the wife and kids sleep anyways.
KloudIX said:
You are most definitely welcome, I would be more than happy to help in the future too, but do try Nova Launcher, its quite slick, easy to customize and I haven't seen a bit of lag out of it period.
Im posted up in my basement working, while the wife and kids sleep anyways.
Click to expand...
Click to collapse
I'm using Apex right at the moment, but I've heard great reviews about Nova. I'll definitely try it out tomorrow when I get some time, and I have to set up the wifi network on this phone. We live a little outside the city here and the 3G/4G speeds get pretty awful in certain spots for them. Back in Orlando for myself, however, they're really fast.
But yeah, I'll definitely check out Nova. Maybe I can still refund Apex. XD
KloudIX - Thank you so much for your helpful replies in this thread! I'm attempting to help my buddy with flashing Blazer ICS on his stock Epic 4g Touch, and when I started researching this for him, it seemed to come with a lot of potential "gotcha's" and I didn't want to be the one to brick his device.
You made everything clear and I just wanted to thank you for that.
whoaboy said:
KloudIX - Thank you so much for your helpful replies in this thread! I'm attempting to help my buddy with flashing Blazer ICS on his stock Epic 4g Touch, and when I started researching this for him, it seemed to come with a lot of potential "gotcha's" and I didn't want to be the one to brick his device.
You made everything clear and I just wanted to thank you for that.
Click to expand...
Click to collapse
Have you gotten as far as rooting his phone yet? What "gotcha's" are you referring too, sorry for the delayed response. Been busy. Once you get him rooted follow the OP for Blazer Rom and flip back and forth through here if you have questions. Most of the "Gotcha's" that I am thinking of have been wiped due to sfhub's mods/fixes.
If u do insta) blazer, you'll love it. I've been using it daily. Has great performance and battery life
Sent from my rooted potato
I am flabbergasted at my new note 2. I got it a few weeks ago, I set it up how I wanted it and everything was fine. The wifi at home works flawlessly. When I try to connect at work, it will connect for about 30 seconds and then the wifi turns itself off. I'm now on vacation and the wifi here acts exactly like it does at work, connects for about 30 seconds and then turns off. I have looked all over these forums, including forums on the other iterations of the phone to no avail. I can't seem to get it to work. Any suggestions? Will flashing the ROM potentially fix the problem?
I've been never flashed a phone before, but it sounds like a nightmare for a newb like me. I wouldn't be able to replace the phone if I turned it into a paperweight. Is it worth the risk? I've been trying to do my research, but it's daunting with everything involved. Any suggestions onI certain posts I should read? I just can't stand the bloatware companies add to devices. I do build my own PCs, but that seems like cake compared to flashing a new ROM. I just don't know where to start... Any suggestions would be more than helpful.
Thanks in advance for any help!
Try disabling at the smart wifi app in system settings. That fixed my wifi problems.
Sent from my Nexus 7 using xda app-developers app
Jrockttu said:
Try disabling at the smart wifi app in system settings. That fixed my wifi problems.
Click to expand...
Click to collapse
Wow! That's all it took... Stupid bloatware. This has definitely made up my mind about rooting my phone. If I want to root my note 2 with the Jedi ROM, where should I start looking and learning about doing it. I don't want a super expensive brick... Thanks again for the solution.
Animaljr said:
Wow! That's all it took... Stupid bloatware. This has definitely made up my mind about rooting my phone. If I want to root my note 2 with the Jedi ROM, where should I start looking and learning about doing it. I don't want a super expensive brick... Thanks again for the solution.
Click to expand...
Click to collapse
Read.....read again.....read some more til ur comfortable with what your doing.
http://forum.xda-developers.com/showthread.php?t=1987541
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Flashing ROM
jyazzie110 said:
Read.....read again.....read some more til ur comfortable with what your doing.
http://forum.xda-developers.com/showthread.php?t=1987541
Click to expand...
Click to collapse
I have been reading all morning... I'm still not sure what I need to do exactly. Do I download all of those files to my phone and do everything from here or is part of this process done on the PC? I was reading in a separate part of the forum about having to download Odin (I believe) and using it to flash the ROM? Also, I use AT&T, I'm assuming that's the carrier files I need but I don't see them on the Jedi ROM page. Does this mean Iccan't flash that ROM with my carrier? When it says desired modem, does that mean that's optional or I need to pick one? And do I have to do that at the time of flashing the ROM or can I do that at a later time? What is nandroid and what do I use it for? Next, what is the factory data reset? I've downloaded CWM, do I use that app to wipe the system? How do I actually flash the system? How do I wipe the cache and what is dalvik? What permissions need to be fixed and how do you do that? How do I flash the carrier files, modem and add-ons? Do I need to do that at the time of flashing the ROM or can it be done later?
This is my first attempt at flashing and have no idea what I'm doing, even after days of trying to figure it out. I have a gazillion questions... This forum is amazing and everyone is super helpful, but it would be nice if there were some kind of general flashing guide or maybe a general FAQ. I didn't find the search function of the forums too helpful. It seemed that the results weren't even anything close to what I was looking for. anyway, thanks again for the help and sorry about all the questions.
Hi guys..
This is my first time on this site. I dont know why I never found it sooner. Anyways. I have a Sprint Galaxy S2 Epic 4g Touch. I am currently on the fi27 I believe & I am rooted.
I would like to update to the JellyBean.
First off, can I go to JellyBean from the fi27, or do I have to go to the Fl24 first, then to JellyBean?
Do I have to unroot, before I do anything?
I hope I am asking all the right questions. I really have no clue what I am talking about. I had my friend try to explain it to me, but didnt work very well... My head isnt right at times. I have a brain tumor, so sometimes things are hard for me to comprehend..
So if someone could tell me what I need to do in order to get to JellyBean, from rooted fi27.. I would appreciate it.. Or if someone can guide me to the correct post that I would need to read that explains it..
Just anything to help me get to JB, & whatever Files or programs I need or whatever..
Really appreciate your guys help!! Means a lot...
Welcome to the site! If you aren't sure that you are rooted you can look for SuperSU
http://forum.xda-developers.com/show....php?t=1953783
If you scroll down a little bit to post 2 you'll see
Q. Now I am rooted, how do I install clockwork mod...
Click to expand...
Click to collapse
Rwilco has made a compilation of the stock roms (http://forum.xda-developers.com/showthread.php?t=1903252), which include Official JB Builds. When you feel confident about moving forward, you might also want to look at some of the other non-stock roms too. Good luck in your flashing!
To go from ics to jellybean flash in odin a one click for a jellybean rom. Super easy to do take a look at some stickies for guidance. Rwilco has the one clicks for you.
Sent from my SPH-L900 using Tapatalk 2
reply
I am rooted. I said that in the first post.
I have no clue what an Odin is or a one click..
Like I said, I have never done anything like this before. I got my phone from a friend who had rooted it before I got it.
I apologize for my questions. Having a brain tumor messes up my head at times & things are hard for me to understand. I am sorry.
Can someone maybe post a link to the page or the file that I would need in order to get to JellyBean..
I am not on ICS. I am still on FI27
Can I go to JellyBean from FI27, or do I have to go to FL24 first?
Can I just flash to JB from where I am now, being on FI27 & rooted or do I have to Unroot first.
Nobody answered my questions..
Or If you did, I am sorry, but I dont understand.
Go to this post...
http://forum.xda-developers.com/showthread.php?p=39175034
Click on the link for GB27 root/restore and download to your PC.
Once its DL you need to extract files. Right click on your screen and make a folder gb27...then click on the DL gb27 and extract... Click to select where to extract too then select that folder you just created.
Once it's done double click until a screen pops up that says something like root/restore gb27. Boot to DL mode (power off the hold volume down and power at the sane time.. Then select volume up) and then connect to PC. Once it recognizes your device...yellow light...click start and then let it do its thing till the green pass light happens then your phone will auto reboot and then set it up.
I know this sounds like a lot. While you're DL the one click at this link watch qbkings video and it will all make sense I swear. He makes it very very easy.
grab the restore version of the one-click...being its ur first time on jb.. this will wipe ur phone data..so back up anything u need...but i definitely advise using restore version ...this will also create the correct system partition for jb on ur phone....and as stated above, Watch the qbking video...it is a great resource.....Good luck..
Hello new to the forums. I have been rattled once again by the s3. Finally a problem I haven't really found too many solutions to and plus don't want to increase my chance of completely destroying my phone. Now. I have a Virgin Mobile phone in the US. Was on 4.1.2 but to flash to cricket I was trying to downgrade down to 4.0.4 from JB to ICS. Pretty much during this process not doing my homework I used odin and put the phone in download mode and figured oh Sprints rom should work since SPH-L710 is the same model and completely being wrong. I have been searching around google because I am soft bricked. Here is my assumption of soft brick. When Odin finishes the screen goes red stating the recovery files cannot be found and it wont read my sd card. Still able to go to download mode but not reboot mode. Hence, Soft Brick. Been trying to get out and recently took off a sticker seeing C-Spire. Now I remember seeing this while I was reading my XDA forums so I figured why not. Found some youtube videos googled and fond J7 for C-Spire. So close, but the link didn't exist or something. So... My conclusion finally made an account and finally asking for help the correct way. Please provide links and comments to help me out here would love this s3 back on track. Hope I followed the rules. I did honestly search the forums one had c-spire, but link was dead. My luck man. Thanks in advance.
Wanted to also add. Maybe with this I wanted to for a while, but never had the clear instructions on this nor want to repeat the process of screwing up my phone AGAIN after fixing it. Any good ROMs for the s3 C-Spire SPH-L710? For Example, Would love to use that multi-window with anything and I tried pacman not loving the whole ics not using the home button preferably JB I think which is stock whatever is stock. I loved the XMT launcher and the whole PIE thing. Just let me know guys. Ahead Apologies for the noob questions if they are.
this help http://www.sxtpdevelopers.com/showthread.php?t=55
you should beable to flash that. then just let the phone update.
Still trying it out at the moment just downloading it, but if it does fix this and so on whats some good roms for the C-Spire or im presuming this does not ever fall in the catergory of sprint but cspire yes?
mountrichy said:
Wanted to also add. Maybe with this I wanted to for a while, but never had the clear instructions on this nor want to repeat the process of screwing up my phone AGAIN after fixing it. Any good ROMs for the s3 C-Spire SPH-L710? For Example, Would love to use that multi-window with anything and I tried pacman not loving the whole ics not using the home button preferably JB I think which is stock whatever is stock. I loved the XMT launcher and the whole PIE thing. Just let me know guys. Ahead Apologies for the noob questions if they are.
Click to expand...
Click to collapse
I don't have the c-spire, but once you flash the stock rom from the earlier post, you should be able to root and set yourself up with XMT and pie controls on the stock rom. They are stand alones and you can add them yourself, without looking for a custom rom for it.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Did not work first two times said it failed using odin 3.07 and that site you led me to. it says product mode SPH-L710. and has secure check fail sb11. Please help this is getting very frustrating.
Ok so background... I used to alway be android... rooted the works.. used to be really into it... then I got pissed one day at my android after it restarted taking what would have been like a nobel peace prize winning picture from inside a blackhawk... Literally... I almost threw this thing out of the doors from 3000 feet.... so next day i went to iphone. Fast forward 3 or so years...
I got pissed at iphone for sucking and releasing crapy phones without working bugs out. so I decided this time i was going back to android for good....
Two months ago i bought the Samsung Note 4 from sprint through their cut your rate in half plan... ($39/mo for unlimited everything... how could i go wrong?!)...
Took her home and started googling how I was gonna root her and get native hotspot for free.. cuz who pays for that ****... Learned what i needed to know (really refreshed my memory as i have done this in the past...) Flashed myself a new ROM and all was good in the world. Rooted and had my native hotspot.
Well, went to go use private mode and it didn't work. Back to the drawing boards... read a few things read the fine print and the ROM I was using didn't support it. No big deal, just gonna look for one that does... Found one that supports and read the page... well, I decided to do this after working all day and i was sick of being on the computer i just wanted to get it done, clicked the link downloaded the ROM I needed and loaded it.... as soon as it said done I realized... I messed up... I thought i had clicked sm-n910P... I clicked n915p..... quick search shows thats a note edge... so i download the correct one and flash that hoping I didn't **** anything up... WRONG.
Heres the problem.
My touch screen works FLAWLESSLY using the s-pen. perfect response, accuracy.. the works. When i use my finger, it responds.. sort of. The top left of my phone is spot on. as you move down and right, the cursor actually moves FASTER than my finger. So by the time I am 3/4 of the way down and to the right of the screen the cursor is actually already in the bottom right hand corner. Making texting or anything IMPOSSIBLE... now, I'm not a CIS major by ANY means and I avoid technical terms sometimes because I don't FULLY understand what some of it is. That being said, I am a tech savvy person in general, just not so much in the software dept. I'm more of a hardware person...
Question:
Did I mess up the phones HARDWARE.. Like would the digitizer be toasted? i figure that is a one way device so i don't see how that could be the case.. just throwing it out there... or did I fry something else? Anyone have FULLY stock EVERYTHING that i can flash onto this thing... (ROM, Kernel...) I found a stock ROM online to load but it isnt the same one and it didn't fix my problem. No i don't have a back up and yes i know shame on me...
Deets:
SM-N910P
Software Version: n910PVPU1BOB7 - last ROM i loaded hoping to fix the problem....
Hardware Version: N910P.05
Andriod: 5.0.1
Kernel Version: 3.10.40-4243283
[email protected] #1
Build Number: LRX22C.N910PVPU1BOB7
Knox is already tripped so IDC about that...
My recovery manager is back to stock. Tried CWM and i'm not sure if that is what screwed me... i did that and my ROM all at the same time i guess... help?
MOD EDIT POST AND TITLE
Use twrp 2.85 for recovery. It's better for me. Read up on how to Odin the stock tar. Should fix it up. Be sure to do a full wipe of everything not on your xternal SD before odining.
galland1 said:
Use twrp 2.85 for recovery. It's better for me. Read up on how to Odin the stock tar. Should fix it up. Be sure to do a full wipe of everything not on your xternal SD before odining.
Click to expand...
Click to collapse
i used Odin to push a stock .tar ... didn't fix it.. thats when i started panicking and started looking for other ROMS
Did you wipe internal before you Odin'd?
galland1 said:
Did you wipe internal before you Odin'd?
Click to expand...
Click to collapse
I followed the little instructions from the .tar
if by "wipe everything" you mean clearing the cache and doing a factory reset yes.
My advise would be to back up everything with titanium backup to your external card, and start from scratch. If you are on 4.4 right now, download a program called SPCUtility to get your msl number. Load a stock tar, either nk2 if you want 4.4 or bob7 if you want lollipop (my recommendation). Once you load the stock tar with odin, reset the who device by going into your dialer and dial ##786#. It will ask for your msl number and ask if you want to reset. Say yes, and you should be good to go. At this point, when you phone restarts, get to the home screen and see if everything is working. If it is not, take the phone to sprint and let them fix it or replace it. If everything is working, you can root the device, and if you want to load a new rom, you can.
dschachm said:
My advise would be to back up everything with titanium backup to your external card, and start from scratch. If you are on 4.4 right now, download a program called SPCUtility to get your msl number. Load a stock tar, either nk2 if you want 4.4 or bob7 if you want lollipop (my recommendation). Once you load the stock tar with odin, reset the who device by going into your dialer and dial ##786#. It will ask for your msl number and ask if you want to reset. Say yes, and you should be good to go. At this point, when you phone restarts, get to the home screen and see if everything is working. If it is not, take the phone to sprint and let them fix it or replace it. If everything is working, you can root the device, and if you want to load a new rom, you can.
Click to expand...
Click to collapse
There is literally nothing on the phone right now. i don't care if anything is backed up... the phone was bascially stock to begin with and i have my contacts and everything saved through kies. im on 5.0 i guess technically... can i still get my MSL?
I would have to Root my phone again, load the SPCUtility, get my MSL flash the stock .tar (any idea where i can get a better one? the one i have isn't the stock i knew)... then follow the rest of this?
BTW thank you SO much for helping me out. I appreciate it. A LOT.
bsil12 said:
There is literally nothing on the phone right now. i don't care if anything is backed up... the phone was bascially stock to begin with and i have my contacts and everything saved through kies. im on 5.0 i guess technically... can i still get my MSL?
I would have to Root my phone again, load the SPCUtility, get my MSL flash the stock .tar (any idea where i can get a better one? the one i have isn't the stock i knew)... then follow the rest of this?
BTW thank you SO much for helping me out. I appreciate it. A LOT.
Click to expand...
Click to collapse
The only way to get the msl number is to call sprint but if you just got the phone they probably won't give it to you. So the other option is to flash this stock tar to go back to 4.4. Here is the tar file for nk2 and bob7.
http://forum.xda-developers.com/note-4-sprint/general/stock-n910pvpu1anie-stock-tar-t2944867
Go back to nk2, root and intall SPCutility and get your msl. Then flash bob7, and then use the msl number and ##768# and reset the device.
dschachm said:
The only way to get the msl number is to call sprint but if you just got the phone they probably won't give it to you. So the other option is to flash this stock tar to go back to 4.4. Here is the tar file for nk2 and bob7.
http://forum.xda-developers.com/note-4-sprint/general/stock-n910pvpu1anie-stock-tar-t2944867
Go back to nk2, root and intall SPCutility and get your msl. Then flash bob7, and then use the msl number and ##768# and reset the device.
Click to expand...
Click to collapse
You sir, are a god of sorts. I will try this when i get home. I can't download anything on my work computer or i'd do it right now. THANK YOU! I'll keep you posted.
I will pm you my email address. If you have any questions email me and i can respond faster.