Quick introduction. For experience and training purposes I started buying broken phones (LCD, digitizers) and try to repair them. I bought HTC Wildfire S with just cracked touch screen. Bought parts and replaced. When assembling phone back the screen did not work on the whole area, what I mean it was working like partially, only vertical left hand side was working. Like writing text message, R works, then E and T doesn't.
Tried to disconnect the digitizer connector, maybe it was not touching properly, couple times. But that didn't work. It was just working in different places than before. Found here a thread about a problem for different digitizer versions.
http://forum.xda-developers.com/showthread.php?t=1942259
But the thing is I have no idea how to approach anything that these people suggest. I don't know how to replace software, reinstall it or whatever involves soft. I would like to learn too.
If you have any ideas or suggestions please share with me, if not I will just sell the phone back as not working. Thanks
Related
A customer brought her G2 on simple mobile to me with this problem: The letter "A" wont work on portrait mode nor will the home key. I figured it was the digitizer so I replaced that with an OEM Replacement part and as soon as we booted back up the problem was still there. Could it be her OS is corrupt or possibly a warp in the case thats keeping the plate from contacting the faceplate. I'm rather stumped as I ran a logcat and I saw nothing out of the ordinary during normal input. Any help is appreciated.
Touch plate? I am confused to what you mean by this. I am not too familiar with the electronic construction of a digitizer so any info would be helpful.
The digitizer isn't coming in contact with the face plate I believe. (Sorry I used like three different words to describe the same thing in my previous post) Any tips on how to fix that would be great. I saw a video on youtube that stated a part where a heat gun would be used but I never came across a front panel (The part with "T-mobile" on it so I installed the digitizer and went along). I think I may have messed up.
i have the same problem, i dropped the phone, and the touch screen was broken, i replaced it but now the left side and home button arent worksing
ps the broken screen worked still also on the left side , did you find a solution ?
I have the same problem.
I believe it's the ribbon cable, not the Digitizer. The ribbon cables on this phone hangs between both screens and is fairly exposed at times.
I still have a couple weeks in my warranty to return it to HTC, but I can't get it to S-on. Unless I get S-on before warranty is up, I'm going to have to replace it myself.
Ribbon cables for this phone cost ~$30 on ebay. tell me if you fix it.
Any luck with this, anyone?
I have broken screen on my htc desire hd, i have replaced the LCD+digitizer before. i know my way around this phone.
Is it easy to replace just glass screen ?
I cant see how i can seprate them. they are glued in this black glue thingy.
Better buy whole LCD + digitizer?
by.......................g0tmi1k
I need to do the same. Also since dropping the phone my Bluetooth turns on and off but doesn't always connect. (highlights or ticks option , but I'm not getting anything on the top bar). I disconnect and re-connect a few times to get it working
While I have the phone apart is there anything I can do to fix it?
Sent from my Samsung Galaxy S III using Android Revolution HD
I just replaced the glass only on mine. Unfortunately, the touch screen isn't responding. Anyone know where I might have gone wrong??? Everything else seems to work fine!
Probably a Ribbon Cable.
keithfrombm said:
I just replaced the glass only on mine. Unfortunately, the touch screen isn't responding. Anyone know where I might have gone wrong??? Everything else seems to work fine!
Click to expand...
Click to collapse
Try taking it back apart and re-place the ribbon cables back in there seat, they may not be making proper contact. If you replaced the glass without taking it apart you probably un-seated one of the cables. When working on iPhones there is a cable that is only held in place once you close it and put the phone back together.... It's a PITA.
Buy new part and dont replace . Your self its difficult. And its not easy
You can buy a "used" DHD device to replace yours. It'll be cheaper and easier... With a backup on sdcard, your device will be the same !
Yesterday i dropped my device from one feet. It turned off and i turned it on.
Now lower part of screen and capacitative buttons dont work. i will attach a image(non-working area outlined in red)
My warranty has expired so i cant exchange it for a new one. What should i do? Can i fix it by myself?
Please help me
Fycola123 said:
Yesterday i dropped my device from one feet. It turned off and i turned it on.
Now lower part of screen and capacitative buttons dont work. i will attach a image(non-working area outlined in red)
My warranty has expired so i cant exchange it for a new one. What should i do? Can i fix it by myself?
Please help me
Click to expand...
Click to collapse
Hi,
Only thing I can think of is that somehow it has damaged the cable from the touchscreen or the tiny wires that feed into the cable without damaging the screen. I came across a brand new screen I was replacing once for someone that had a similar problem where the bottom left hand corner wouldn't respond to touch unless there was firm pressure on the screen to create contact, and this was a brand new screen. It could also be that the touchscreen connector needs to be pushed back onto the board if it's come a bit loose.
If this is the problem, you can fix it by yourself although I'd have a good look around youtube, there are heaps of DIY videos of how to replace screens. If you do go down this path I recommend you replace the touchscreen/LCD/LCD frame in one go, as it's generally already pre- assembled the only thing here is that there are 3 brands of LCD's HTC used with the phone and they aren't all compatible, and you can only tell by pulling down your phone and looking at the LCD flex cable colours, and the other thing is that the screens that are available aren't always the same quality as the original. If this sounds to hard your best bet is to take it somewhere and diagnose the problem just in case it's something else
Its been some days, I'm experiencing this weird touch screen problem.
My DZ touch screen doesn't respond properly.
For example:
If i see an image and slide just one finger up and down then it would zoom in and out. And then the whole screen becomes unresponsive.
It seems as if, its touched by itself. Even the softkeys would go numb. Only the haptic feedback of my search button works at that moment.
But the trackpad works perfectly.
But, If i lock and unlock the screen using power buttons, it would work properly for some few moment and then again the problem repeats.
At present I'm repeating this process of locking and unlocking screen to use my phone.
One even worst weird thing is that, if the device is connected to a charger and kept on the table or floor. This problem doesn't occur.
I have done system format, restored my nandroids and even changed Roms. The problem still exists.
Please note, i don't use any Casing or covers that would press the device hard for malfunctioning of screen. I have even removed and replaced my screen guard.
I'm sure, its not a software issue.
And even i dont think its a strip issue, because i dont use my physical keyboard always.
Can anyone say what hardware issue it might be..?
Or what i need to do? I'm really out of options.
Do i have to replace my whole screen or the digitizer..?
Thanks...
Thats no fun,
As you stated it's more than likely a hardware fault, the two most likely culprits would be the digitizer or the main flex cable
Which would be this and this
both relatively easy to replace depending on your experience
in 4.x and up ROMs check the developers setting to show touch or use apps like
z device test
or
yet another multitouch test
these wont help you fix the issue but may show you where the bad points are on the screen
best of luck
I know the problematic spot. Its near Search softkey. Even Yet another multi-touch test would stuck at that spot....
As you can see in the image, that i'm not holding anywhere, still it shows that somewhere around Search softkey its touched by itself.
In second image, If i move my fingers around, it would show the other touch responds, but if i slide near search, it would go and stuck there itself.
So, i guess i would first go with the flex cable.
In actuality I'm leaning toward the digitizer in your case, but its possible to be either.
And if you have a spare phone it may be worth disassembling even without buying anything. On a G1 I once fixed a similar issue just taking out the digitizer and cleaning the contacts on the ribbon and the edges of it as well, when I put it back it worked like new. I think some dust may have gotten into the edges but it may be worth a shot before buying anything... But could make matters worse so if you don't have a spare, buy parts first
Best of luck
Sent from my Nexus 7 using XDA Premium 4 mobile app
I guess i should try disassembling and clean it first. If it still persists then i would go for digitizer.
And thanks for giving a hope.
Thanks...
Hi guys
I wanted to ressurect my old moto g5 (cedric xt1676) which i was not using for a longer time. Screen was cracked but touch worked just fine. I bought screen replacement assembly and connected it. Screen (picture) is working fine but touch is not working at all. Is there any way to solve this problem? What i found untill now is that after some update motorola/lenovo disabled support for 3rd party screens - one i bought is stated to be "original" but i doubt it.
I did a factory reset before removing old screen, after connecting new one, start menu was in russian (i can't read bukvas so its a guess ), after another reset it is back to english but touch is still not working. There is a padlock symbol in top left corner of the screen.
I just wanted to fix the old phone to give it to the family member but now i spent so much time on this issue that i want to fix it very badly.
Hope that someone can and want to help me.
At the end of the day it's all down to if the correct parts were used and if it was fixed correctly. Nothing we can really help with here.
It's Russian ransomware screen
Seriously always use OEM parts.
Make sure all connectors are intact; remove and inspect contacts. Make sure you didn't miss a ground or data connection; sometimes they are just contact points between assemblies. Using the wrong length screw may cause a missing contact pathway. Assemble exactly the way it was.
The mobo may have been damaged when the display was broken. High G impacts can internally damage chipsets and crack solder joints. Flexing a multilayered mobo can break internal traces.
Sorry to hear that. Anyway - i have nothing to loose so i would try with olderversion of android - is it possible to instal without working touch in the phone?