Please help. I brick Huawei Ascend P6 after installing B116. The phone does not start at all. One can do something or just service? Thanks
rednic said:
Please help. I brick Huawei Ascend P6 after installing B116. The phone does not start at all. One can do something or just service? Thanks
Click to expand...
Click to collapse
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app. by some card reader. Now insert sd card and press vol+ vol- and power button. Install firmware and also go to recovery mode and wipe cache. You can access recovery by pressing vol - and vol + button simultaneously.
Hope this works !!
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app. by some card reader. Now insert sd card and press vol+ vol- and power button. Install firmware and also go to recovery mode and wipe cache. You can access recovery by pressing vol - and vol + button simultaneously.
Hope this works !!
Click to expand...
Click to collapse
My phone does not start at all. I press vol + vol- and power button.
http://forum.xda-developers.com/showthread.php?t=2447198
I install Stock Firmware B116 -> dload_B116.zip md5 : 01bc5ae3c0095efeb6ded805f73c2b45 !
rednic said:
My phone does not start at all. I press vol + vol- and power button.
Click to expand...
Click to collapse
Might be a stupid question but are you sure your phone has battery left?
Sent from my P6-U06 using Tapatalk 4
Ottomaani0 said:
Might be a stupid question but are you sure your phone has battery left?
Sent from my P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
when I install b116 the battery was 90%
rednic said:
when I install b116 the battery was 90%
Click to expand...
Click to collapse
Ok. No signs of life if you plug in the charger?
Sent from my P6-U06 using Tapatalk 4
Ottomaani0 said:
Ok. No signs of life if you plug in the charger?
Sent from my P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
Phone is dead. When installed B116 OK on yellow background. Restart and phone is dead.
rednic said:
Phone is dead. When installed B116 OK on yellow background. Restart and phone is dead.
Click to expand...
Click to collapse
Hmmm, weird... I think you have to take it to the service center then :/
Should go in warranty, just tell them you tried to update and it got bricked.
Sent from my P6-U06 using Tapatalk 4
Ottomaani0 said:
Hmmm, weird... I think you have to take it to the service center then :/
Should go in warranty, just tell them you tried to update and it got bricked.
Sent from my P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
send service:crying:
rednic said:
send service:crying:
Click to expand...
Click to collapse
Yep, it's sad I just got mine back from service after 4 weeks
Sent from my P6-U06 using Tapatalk 4
Ottomaani0 said:
Hmmm, weird... I think you have to take it to the service center then :/
Should go in warranty, just tell them you tried to update and it got bricked.
Sent from my P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
is there any sign of connectivity with pc on inserting data cable?
I got the same issue trying to update to B117. Frozen dead. I'll bring it to the service today and get back when I have news on this.
Did you guys root or add custom roms ? Probably that interfering with update.
I've just rooted the phone and installed clockwork recovery. No custom ROM.
On the other hand it is strange that today the led started blinking red (battery under 10%). I've connected it to the charger and after sometime stopped blinking. So I draw the conclusion that the phone is in some idle frozen mode.
The issue is that the only thing I could do is to wait until the battery goes full dry and shuts down for real. Then charge it again and try to enter the factory mode.
I'll go on the warranty claim and see what the guys tell me.
If the battery would have been removable this would have been simple. I've never had this issue with no other older Android smartphone... and I've rooted and modded quite a few.
He returned the phone by service. Motherboard was broken.
My firmware now is P6-U06,Android_4.2,Emtion_UI,V100R001C678B103, kernel 3.0.8-00783-g2335f22.
is the last?
rednic said:
He returned the phone by service. Motherboard was broken.
My firmware now is P6-U06,Android_4.2,Emtion_UI,V100R001C678B103, kernel 3.0.8-00783-g2335f22.
is the last?
Click to expand...
Click to collapse
you bricked it ..dont lie
mendetr augustinian
GalaxySIIII said:
you bricked it ..dont lie
Click to expand...
Click to collapse
can i do the same for mine?? can i send it to service and tell them that i dont know what happen??
Absolut22 said:
can i do the same for mine?? can i send it to service and tell them that i dont know what happen??
Click to expand...
Click to collapse
I sent in service
They changed the motherboard
Now I put B114
Pass the original 111B
It is still officially the version
http://consumer.huawei.com/en/support/products/downloads/p6-u06-en.htm
Absolut22 said:
can i do the same for mine?? can i send it to service and tell them that i dont know what happen??
Click to expand...
Click to collapse
try it u might be lucky
In my case, the phone is still in service (1 week and counting). I assume it's going to have some hardware replaced. If it was just a software issue, this would have been solved way quicker. I am curious though whether is the same motherboard issue.
Related
Hey guys,
I flashed arco's ICS alpha 3 using CWM and everything was working fine for a few hours. Installed some apps and rebooted the phone. But suddenly the phone didn't reboot and now isn't turning on anymore. I can't even get it to the recovery or download mode. It's totally bricked. When I connect it to the PC, it trys to install QHSUSB_DLOAD driver.
Is there a way that I can unbrick the son of a *****?
Any help will be appreciated.
KunX said:
Hey guys,
I flashed arco's ICS alpha 3 using CWM and everything was working fine for a few hours. Installed some apps and rebooted the phone. But suddenly the phone didn't reboot and now isn't turning on anymore. I can't even get it to the recovery or download mode. It's totally bricked. When I connect it to the PC, it trys to install QHSUSB_DLOAD driver.
Is there a way that I can unbrick the son of a *****?
Any help will be appreciated.
Click to expand...
Click to collapse
In my opinion it is a full brick. To "unbrick" the minimum is to be able to get into download mode.
greets
THE-E
Sent from my GT-I8150 using XDA
Oh my what apps did you install ?
Sent from my GT-I8150 using Tapatalk 2
THE-E said:
In my opinion it is a full brick. To "unbrick" the minimum is to be able to get into download mode.
greets
THE-E
Sent from my GT-I8150 using XDA
Click to expand...
Click to collapse
I was affraid of that. But ok. Thanks for the response. I'll try to go to samsung costumer center and see if they will help me.
I installed Winamp Pro, XDA and Swiftkey X for testing.
I was able to reboot the phone with no problems even after I installed the apps. Rebooted it a few times. But on the last time I tried it bricked, for no apparent reason.
KunX said:
I was affraid of that. But ok. Thanks for the response. I'll try to go to samsung costumer center and see if they will help me.
I installed Winamp Pro, XDA and Swiftkey X for testing.
I was able to reboot the phone with no problems even after I installed the apps. Rebooted it a few times. But on the last time I tried it bricked, for no apparent reason.
Click to expand...
Click to collapse
is the charger animation visible?
put your phone for a half hour on the charger and then try to enter downloadmode.
or pull out the battery för ten minutes and then try to enter downloadmode
No. It's completely dead. Won't show up anything.
KunX said:
No. It's completely dead. Won't show up anything.
Click to expand...
Click to collapse
the only way is bring back your phone to SSC and let the warranty do its magic goodluck though
hotheabilly said:
the only way is bring back your phone to SSC and let the warranty do its magic goodluck though
Click to expand...
Click to collapse
By rooting his phone and flashing CM9 he voided his waranty ...
Hi
I have a LG G3 D855 european 16Gb
Today i received a upgrade firmware notification.
I run the upgrade and now my phone wont boot.
Black screen a notification light red and blue
Already take off the battery (after 15 minutes) and still the same
What can i do ?
I need so badly the phone
Thanks
sakana said:
Hi
I have a LG G3 D855 european 16Gb
Today i received a upgrade firmware notification.
I run the upgrade and now my phone wont boot.
Black screen a notification light red and blue
Already take off the battery (after 15 minutes) and still the same
What can i do ?
I need so badly the phone
Thanks
Click to expand...
Click to collapse
Is it rooted?
Sent from from my LG-D855
EpicChineseTime said:
Is it rooted?
Sent from from my LG-D855
Click to expand...
Click to collapse
yes
but i run other upgrades after and no problem
sakana said:
yes
but i run other upgrades after and no problem
Click to expand...
Click to collapse
reboot it and update it with pc suite, and then root the phone again...
A "Thanks" is highly appreciated. [emoji41]
Sent from from my LG-D855
EpicChineseTime said:
reboot it and update it with pc suite, and then root the phone again...
A "Thanks" is highly appreciated. [emoji41]
Sent from from my LG-D855
Click to expand...
Click to collapse
thanks in advance
but the device wont reboot
black screen and red blue led notification
nothing more happends
sakana said:
thanks in advance
but the device wont reboot
black screen and red blue led notification
nothing more happends
Click to expand...
Click to collapse
Hold the power button for a while, it should reboot.
I meant click the "thanks" button below! [emoji23]
Sent from from my LG-D855
EpicChineseTime said:
Hold the power button for a while, it should reboot.
I meant click the "thanks" button below! [emoji23]
Sent from from my LG-D855
Click to expand...
Click to collapse
No, no reboot
Press the power button for 3 minutes
nothing
sakana said:
No, no reboot
Press the power button for 3 minutes
nothing
Click to expand...
Click to collapse
Hmm, what about pulling the battery off?
EDIT: i missed it.
What about a hard reset?
EpicChineseTime said:
Hmm, what about pulling the battery off?
EDIT: i missed it.
What about a hard reset?
Click to expand...
Click to collapse
already tried
this is so stupid
sakana said:
already tried
this is so stupid
Click to expand...
Click to collapse
Try this.
http://solverbase.com/w/LG_G3:_Hard_Reset_(Factory_Reset)
Or try with pc suite.
EpicChineseTime said:
Try this.
http://solverbase.com/w/LG_G3:_Hard_Reset_(Factory_Reset)
Or try with pc suite.
Click to expand...
Click to collapse
tryed that. No option results
PC Suite won't recognize the device
sakana said:
tryed that. No option results
PC Suite won't recognize the device
Click to expand...
Click to collapse
Hmmm... what about returning it to the store?
Sent from from my LG-D855
have you tried to enter to download mode??
With the phone powered off, hold volume UP and keep holding while you connect usb . Then it will boot to download mode
now open PC suite and press on Phone menu, select Recover from upgrade errors.
It should download and restore your phone.
If it doesn't work then you need to manually download your firmware from this site (you need to put your imei after "esn=" before Going into the webpage), it is an official LG site for info about your personal phone there you will find an url with the KDZ file specific for your phone .
csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=YOURIMEI
and follow the steps on this post to flash your stock rom
badtzo said:
have you tried to enter to download mode??
With the phone powered off, hold volume UP and keep holding while you connect usb . Then it will boot to download mode
now open PC suite and press on Phone menu, select Recover from upgrade errors.
It should download and restore your phone.
If it doesn't work then you need to manually download your firmware from this site (you need to put your imei after "esn=" before Going into the webpage), it is an official LG site for info about your personal phone there you will find an url with the KDZ file specific for your phone .
csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=YOURIMEI
and follow the steps on this post to flash your stock rom
Click to expand...
Click to collapse
Thank you so much
It Works and did not loose any data
you save my day
Thank you Thank you Thank you Thank you Thank you Thank you Thank you
sakana said:
already tried
this is so stupid
Click to expand...
Click to collapse
try mine tutorial >>>LINK<<< it will not delete your apps and data
I flashed MIUI 8 rom today as a secondary rom on multi rom and now my device doesnt boot and the screen doesnt turn on even when i connect it to a charger and also the device is not detected by my computer .. what should i do ?
Any sign of life when vol + & power pressed together?
Mega unbrick guide. You can find it in the same thread
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
passion8059 said:
Any sign of life when vol + & power pressed together?
Click to expand...
Click to collapse
No sign of life ... its totally dead .. the screen doesnt even turn on even when i press vol + and power .. nor it turn on when i connect it to the charger
Have you tried the unbrick guide?
Sent from my OnePlus 3 using Tapatalk
Omair555 said:
I flashed MIUI 8 rom today as a secondary rom on multi rom and now my device doesnt boot and the screen doesnt turn on even when i connect it to a charger and also the device is not detected by my computer .. what should i do ?
Click to expand...
Click to collapse
Completely power of the device by pressing the power button for 40 seconds. Then press volume up for ten seconds and while pressing connect to the computer. If the device is detected by the computer then try the first method of mega unbrick guide. Best of luck.
Thanks my device is back to life
Mega unbrick miracle
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Reading this post was more oppressive than a Alfred Hitchcock movie's...
Omair555 said:
Thanks my device is back to life
Click to expand...
Click to collapse
What did you do to have it turn on again?
bltclem said:
What did you do to have it turn on again?
Click to expand...
Click to collapse
Used the mega unbrick guide
OnePlus never dies! He kills flagships.
Its fully unbrickable, screwed phone up lots off times experimenting with things and have always got phone back again.
Same! i got mine yesterday off swappa, original owner fked it all up by unrooting, flashing stock recovery and rom, and never took off the pin to decrypt the storage on twrp so i screwed the storage with resetting the userdata.img and it only showed 16gb out of 64 so i used the mega unbrick guide and now im back in buisness
Sent from my aicp_oneplus3 using Tapatalk
i found out my phone download the kill update. now when i try to turn it on, the update start. is there any way to cancel the update?
please help.:crying:
https://alliancex.org/viewtopic.php?f=111&t=6
Sent from my N7 using Tapatalk
How to
Ghost-3x said:
i found out my phone download the kill update. now when i try to turn it on, the update start. is there any way to cancel the update?
please help.:crying:
Click to expand...
Click to collapse
Just do a factory reset without turn on your mobile with button combination
too late
zaibjan said:
Just do a factory reset without turn on your mobile with button combination
Click to expand...
Click to collapse
too late . my phone is dead.
Oh no
Ghost-3x said:
too late . my phone is dead.
Click to expand...
Click to collapse
Oh no that's not right sorry for your loss.
I failed flash with flashtool and now HH is dead and can no longer enter flashmode.
Can anyone help me?
De Flow said:
I failed flash with flashtool and now HH is dead and can no longer enter flashmode.
Can anyone help me?
Click to expand...
Click to collapse
Can you provide more details about it? What did you do on flashtool? What error did you get? Does the cellphone gives u any led? Were you unlocked with bootloader? All the ifno you can provide will hrlp us understand and see if there is a solution
Jemec26 said:
Can you provide more details about it? What did you do on flashtool? What error did you get? Does the cellphone gives u any led? Were you unlocked with bootloader? All the ifno you can provide will hrlp us understand and see if there is a solution
Click to expand...
Click to collapse
I have successfully UBL and replace the kernel.
my plan tries firmware custom india, but i failed when flash
De Flow said:
I have successfully UBL and replace the kernel.
my plan tries firmware custom india, but i failed when flash
Click to expand...
Click to collapse
I am sorry, did not get you. Could you upload a screenshot?
Jemec26 said:
I am sorry, did not get you. Could you upload a screenshot?
Click to expand...
Click to collapse
at this time my dead HH can not be used.
I tried firmware 7.1.1 here http://www.mediafire.com/file/l30vd...A1_Ultra_G3226_42.0.A.3.32_1308-0798_R10A.zip
De Flow said:
at this time my dead HH can not be used.
I tried firmware 7.1.1 here http://www.mediafire.com/file/l30vd...A1_Ultra_G3226_42.0.A.3.32_1308-0798_R10A.zip
Click to expand...
Click to collapse
What do you mean with HH? and btw, xa1 ultra does not have 7.1.1 firmware, so far is just 7.0. Look into xperifirm for the latest firmware.
i want to know how to install recovery mode in the current state.
if possible this will be easier to solve.
Jemec26 said:
What do you mean with HH? and btw, xa1 ultra does not have 7.1.1 firmware, so far is just 7.0. Look into xperifirm for the latest firmware.
Click to expand...
Click to collapse
sorry it's a term used in indonesia
HH = Handheld = handphone :Hai
therefore I became interested to try it
De Flow said:
sorry it's a term used in indonesia
HH = Handheld = handphone :Hai
therefore I became interested to try it
Click to expand...
Click to collapse
Got it, no problem. Recovery in that mode is not going to be possible. You need to recover your phone first. Does it at least the led turns on at any color?
Jemec26 said:
Got it, no problem. Recovery in that mode is not going to be possible. You need to recover your phone first. Does it at least the led turns on at any color?
Click to expand...
Click to collapse
when in charger led red and when pressed vol - power for 10 seconds change color purple for a while
already tried in charger 4 hours no results on screen (no full battery indicator on screen)
De Flow said:
when in charge led red and when pressed vol - power for 10 seconds change color purple for a while
already tried in charger 4 hours no results on screen (no full battery indicator on screen)
Click to expand...
Click to collapse
Did you try the emergency mode on pc companion?
Jemec26 said:
Did you try the emergency mode on pc companion?
Click to expand...
Click to collapse
to connect with pc companion its condition must be in flashboot and my HH can not it
De Flow said:
to connect with pc companion its condition must be in flashboot and my HH can not it
Click to expand...
Click to collapse
I am afraid that is hard bricked. If you press vol down + power, you don't get anything as well, right?
Jemec26 said:
I am afraid that is hard bricked. If you press vol down + power, you don't get anything as well, right?
Click to expand...
Click to collapse
vol down + power no reaction and when pressed for 10 seconds led purple for a while and still can not connect pc companion
De Flow said:
vol down + power no reaction and when pressed for 10 seconds led purple for a while and still can not connect pc companion
Click to expand...
Click to collapse
I will try to look for a solution, it might be recoverable. Remember it is still a mediatek phone and it has tons of tools for that processor, try to look for sp flash tool and see if you get something from that. If in my research I find something else I will tell you.
Jemec26 said:
I will try to look for a solution, it might be recoverable. Remember it is still a mediatek phone and it has tons of tools for that processor, try to look for sp flash tool and see if you get something from that. If in my research I find something else I will tell you.
Click to expand...
Click to collapse
Hmmmm. You tried to flash custom rom. Do you have unlocked bootloader? It seems that you flashed it on locked bootloader and got hard bricked. Try to flash not a custom rom.
ardos911 said:
Hmmmm. You tried to flash custom rom. Do you have unlocked bootloader? It seems that you flashed it on locked bootloader and got hard bricked. Try to flash not a custom rom.
Click to expand...
Click to collapse
I have unlock bootloader and I've managed to replace recovery and install SuperSU
De Flow said:
I have unlock bootloader and I've managed to replace recovery and install SuperSU
Click to expand...
Click to collapse
May be this firmware is not for your phone.
ardos911 said:
May be this firmware is not for your phone.
Click to expand...
Click to collapse
maybe also can .... but i have existing firmware from xperifirm
now how to flash it????
Any news?
Hello, I have the same problem. Flash went wrong, now the flashmode is not possible.
Any chance to save ma cellphone?
Greetings