Develop Bugs

[Q] Help! Unable to install GBClean

I am desperately wanting to use the GBClean ROM; it appears to be everything that I need and want. But... I cant get it to work on my phone. To be clear, I have a Sprint Epic 4G... the one with the slide out keyboard. I am assuming we are on the same model and page?
My phone also seems to have a peculiar recovery rom that will not allow me to install the RomManager recovery rom; I have to patch this with a different 3E recovery first...
Anyway, here is my exact procedure:
1. Build with the latest 2.3 via ODIN
2. Go into developer mode
3. Replace the 3E recovery with one that works with ROMManager
4. Root the phone with SuperOneClick
5. Download RomManager
6. Patch the recovery utility with RomManager
7. Reboot into recovery
8. Wipe all data per the directions
9. Install the GBClean 1.0.3 ROM
10. Upon complete, I reboot the phone...
It then hangs at the Samsung logo. I can not get into Recovery or Regular OS. I have to refresh with ODIN once again.
I have done this exact process three times today, all with the exact same results. At this point, I am giving up, unless I find some helpful information.
Does anyone have any thoughts? Thanks in advance!

Wrong wrong wrong........
This is what needs to be done.
Odin back to stock EC05
Update to EI22
Flash gb3.tar (kernel)
Then flash your clockworkmod.
Go into clockwork mod , wipe data cache, and dalvik
Flash rom and boot up
Enjoy
No harshness intended.
Sent From My Cyan Samurai

Biggoron said:
Wrong wrong wrong........
This is what needs to be done.
Odin back to stock EC05
Update to EI22
Flash gb3.tar (kernel)
Then flash your clockworkmod.
Go into clockwork mod , wipe data cache, and dalvik
Flash rom and boot up
Enjoy
No harshness intended.
Sent From My Cyan Samurai
Click to expand...
Click to collapse
THIS WILL TELL YOU "EVERYTHING" you need to know and need.
http://www.youtube.com/watch?v=kwFRzzIqouE
---------- Post added at 06:55 PM ---------- Previous post was at 06:55 PM ----------
bedowyn said:
I am desperately wanting to use the GBClean ROM; it appears to be everything that I need and want. But... I cant get it to work on my phone. To be clear, I have a Sprint Epic 4G... the one with the slide out keyboard. I am assuming we are on the same model and page?
My phone also seems to have a peculiar recovery rom that will not allow me to install the RomManager recovery rom; I have to patch this with a different 3E recovery first...
Anyway, here is my exact procedure:
1. Build with the latest 2.3 via ODIN
2. Go into developer mode
3. Replace the 3E recovery with one that works with ROMManager
4. Root the phone with SuperOneClick
5. Download RomManager
6. Patch the recovery utility with RomManager
7. Reboot into recovery
8. Wipe all data per the directions
9. Install the GBClean 1.0.3 ROM
10. Upon complete, I reboot the phone...
It then hangs at the Samsung logo. I can not get into Recovery or Regular OS. I have to refresh with ODIN once again.
I have done this exact process three times today, all with the exact same results. At this point, I am giving up, unless I find some helpful information.
Does anyone have any thoughts? Thanks in advance!
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=kwFRzzIqouE
always the wrong person...man

Ok... that is good because it gives me another shot and some hope. Thanks!
Now for the newby question... how do I flash the kernel?

Why not just Odin to EC05, root and flash? Then flash the EC05toEI22 modem? Seems a lot easier.

bedowyn said:
Ok... that is good because it gives me another shot and some hope. Thanks!
Now for the newby question... how do I flash the kernel?
Click to expand...
Click to collapse
What do you mean the gb3.tar kernel? Or.... the video shows you what and where to put it what are questioning?
Sent From My Cyan Samurai

Oh, all of this is new to me, and without the video (which was posted after I started to reply) I was kind of lost.
But now having worked through your advice...
SUCCESS! Off to play with my "new" phone!
Thanks everyone!!!

[Q] Some issues with ClockWorkMod/Phone

EDIT: I have fixed it by continuely running ROM Manager to reinstall 5.2.0.7, I did fix permissions then installed 5.2.0.7 and it works. However still having problems rebooting and shutting down, but i will fix that later
So recently i updated CWM. Then i ran into some issues, is that when i tried to do a date wipe and a cache wipe to do a clean install it wipes the user data fine but freezes on wipe /cache. i rebooted and tried again and
Sidenote: when I try to reboot or shutdown it gets stuck at the "shutting down" pop up and never fully shuts down/reboots
I am a bit afraid to try anything more right now
EDIT: I tried to get it into download mode, to maybe try to use odin to flash the older version of CWM. Problem is that i can't get it to go into download mode, and can't find a odin flashable CWM

you dont have any backups? are you on any current ROMs?
If so,
download clockwork recovery or ROM manager from the playstore
open it up
Allow super user permissions
Scroll down to the very bottom you will see a option that says "all clockworkmod recoveries"
Make sure you are on a WIFI for a good download
Choose the CWM 5.0.2.7 version, that one is more stable.. i hate the new one its gay as hell lol
Let it download itll need a good minute, try not to do anything else. you may have to try to download a few times if it freezes just be patient
once it downloads you are good to go and you can flash any ROM
let me know if you have more questions just PM me..
Hit thanks if this helped!

abesgs2 said:
you dont have any backups? are you on any current ROMs?
If so,
download clockwork recovery or ROM manager from the playstore
open it up
Allow super user permissions
Scroll down to the very bottom you will see a option that says "all clockworkmod recoveries"
Make sure you are on a WIFI for a good download
Choose the CWM 5.0.2.7 version, that one is more stable.. i hate the new one its gay as hell lol
Let it download itll need a good minute, try not to do anything else. you may have to try to download a few times if it freezes just be patient
once it downloads you are good to go and you can flash any ROM
let me know if you have more questions just PM me..
Hit thanks if this helped!
Click to expand...
Click to collapse
I am running AKOP Oct 1st nightly. I have backups with Titanium, and an older one for Nandroid backup. I launched ROM manager and tried to install the 5.0.2.7 version but ROM Manager seems to freeze and not work. I kill the app but it doesn't launch properly and only shows the title. I have to take out the battery and reboot to be able to launch ROM Manager up again. I think i may need to find a way to boot into Download and use odin to flash a new CWM and maybe the stock rooted ROM and go from there. I have to agree about the new CWM it is kinda a step back, wish i had looked it up before update.
I am going to PM you but I always like to have this out there in case anyone else is having the same issue or has had it.

for me...sometimes i cant get into recovery/download mode is because
i have a phone case and both buttons arent fully pressed. and as for the tar recovery
Odin T989 tar its a stable version
i recommend using twrp for now for more stability
i had a had a soft brick like everybody else using cwm 6.0.1.4 lol

ClaireH said:
for me...sometimes i cant get into recovery/download mode is because
i have a phone case and both buttons arent fully pressed. and as for the tar recovery
Odin T989 tar its a stable version
i recommend using twrp for now for more stability
i had a had a soft brick like everybody else using cwm 6.0.1.4 lol
Click to expand...
Click to collapse
I press both buttons and i end up in CWM 6.0.1.4. no case on the phone right now.
I have tried to download and install 5.2.0.7 though ROM Manager but it just freezes. This is what pops up right before it freezes http://i.imgur.com/1ryrP.png if it helps. I think ODIN may be the only way if i can make it boot to download that is.

Spud37 said:
I press both buttons and i end up in CWM 6.0.1.4. no case on the phone right now.
I have tried to download and install 5.2.0.7 though ROM Manager but it just freezes. This is what pops up right before it freezes http://i.imgur.com/1ryrP.png if it helps. I think ODIN may be the only way if i can make it boot to download that is.
Click to expand...
Click to collapse
yeah just flash the tar file thru odin and/or just flash over twrp (goomanager then go to the app>menu button>install openrecoveryscript)

ClaireH said:
yeah just flash the tar file thru odin and/or just flash over twrp (goomanager then go to the app>menu button>install openrecoveryscript)
Click to expand...
Click to collapse
My problem is that I can't get it to boot into download mode, that Odin needs it to be in for it to function. Pressing the volume buttons just makes it go into CWM.

I got it to reinstall 5.2.0.7. It took awhile but it looks like its still working. Just tested it out and it works. Now i know to not update CWM. What are the other recovery options that might be better then CWM?

Spud37 said:
I got it to reinstall 5.2.0.7. It took awhile but it looks like its still working. Just tested it out and it works. Now i know to not update CWM. What are the other recovery options that might be better then CWM?
Click to expand...
Click to collapse
TWRP 2.3.1.0 FTW!!
Edit: TWRP 2.3.1.1 FTW!!
Sent from my SGH-T989 using xda premium

LoopDoGG79 said:
TWRP 2.3.1.0 FTW!!
Edit: TWRP 2.3.1.1 FTW!!
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
EDIT: Does it still manage installation and wipeing of data and cache the same way as CWM?

AT&T galaxy s3 softbricked

I was trying to install one of drewgarens touchwiz roms. touchwiz milestone 5 firefly i believe. not the most recent one because i was too lazy . boy was that a mistake. everything was going smoothly until it booted and it got stuck on boot. I thought no big deal just go into recovery and use a backup. until i did so and recovery was gone and there was only download mode. I have spent the whole afternoon trying to fix it and none of it has worked. I tried flashing the stock rom and it as well got stuck on boot. I looked at all the AT&t relevant ones and also the international versions. so all in all is there anyway to fix this and has anyone had the same issue? i was flashing from cyanogenmod 10 m1 to the drewgaren rom btw. I can also go to download mode. I tried to flash stock but it still gets stuck on boot. log. I flashed the ATT boot logo and it did not work. all of which were flashed through odin.
any thanks in advance is greatly appreciated.

I think you can flash back to stock with just download mode + odin

Randomacts said:
I think you can flash back to stock with just download mode + odin
Click to expand...
Click to collapse
I already tried that. It still get stuck on the Boot logo

stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
I can't help you but I wish you luck.

stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
Unplug your device. Hold the power button to turn it off. Hold volume up, home, and power. It should go to recovery. If you do the same thing with volume down instead of up, you can get into download mode.
Sent from my SAMSUNG-SGH-I747 using xda premium

Sounds like you need a recovery...try this
http://forum.xda-developers.com/showthread.php?t=1746665
[SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3] Drivers Backup Root CWM BusyBox + MORE [ATT]
Follow the instructions and you should be able to flash the recovery and continue on with what you were doing. Remember to wipe really good when going from aosp back to any stock based ROM. They are completely different and will cause boot loops if you don't wipe.

jethro650 said:
Sounds like you need a recovery...try this
http://forum.xda-developers.com/showthread.php?t=1746665
[SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3] Drivers Backup Root CWM BusyBox + MORE [ATT]
Follow the instructions and you should be able to flash the recovery and continue on with what you were doing. Remember to wipe really good when going from aosp back to any stock based ROM. They are completely different and will cause boot loops if you don't wipe.
Click to expand...
Click to collapse
I cannot enable usb debugging

Crap...there are Odin flashable versions of cwm floating around you'll need to find one of those. If you haven't found one I'll post one up when I get home.

jethro650 said:
Crap...there are Odin flashable versions of cwm floating around you'll need to find one of those. If you haven't found one I'll post one up when I get home.
Click to expand...
Click to collapse
K I made it home lol. I'll attach a Odin flashable cwm, it's an older one but it'll get you a recovery, I hope. I just tried it on my phone with Odin, 3.07 both with usb debugging enabled and disabled on my phone and it worked both times. Crap keep getting errors uploading right to xda servers, I'll drop box it in a minute.
Ok here we go Odin cwm--> https://dl.dropbox.com/u/28590257/Odin recovery/CWM-Recovery-LTE-SGS3-v4.tar.md5
Newest twrp --> https://dl.dropbox.com/u/28590257/Odin recovery/twrp2.3.1install.zip
I'll add the newest twrp for you lol. Flash the cwm with odin, should work and then the twrp is a zip you can flash in cwm.
Hope this helps get you a recovery.
Remember in Odin use only PDA and only have auto reboot checked.

jethro650 said:
K I made it home lol. I'll attach a Odin flashable cwm, it's an older one but it'll get you a recovery, I hope. I just tried it on my phone with Odin, 3.07 both with usb debugging enabled and disabled on my phone and it worked both times. Crap keep getting errors uploading right to xda servers, I'll drop box it in a minute.
I'll add the newest twrp for you lol. Flash the cwm with odin, should work and then the twrp is a zip you can flash in cwm.
Hope this helps get you a recovery.
Remember in Odin use only PDA and only have auto reboot checked.
Click to expand...
Click to collapse
This may sound like a stupid question but what boxes do i tick in odin?

After your hooked up and Odin is open under the options on the left side check only Auto Reboot. On the right under files check PDA and use that button to browse your computer and find the cwm you downloaded from my dropbox. Then just hit start on the bottom of the Odin window and let it finish, your phone should reboot when its done. It will get stuck again like you described in your first post but pull the battery, put it back in and boot into recovery using vol up,home and power buttons. That should (if everything flashed OK) put you into cwm 5.5.0.4. Once there wipe data/factory reset then restore the back up you mentioned in your original post, that should get you running again.
---------- Post added at 06:05 PM ---------- Previous post was at 05:55 PM ----------
If something has happened to your backup then you could try the stock rooted stuff here , just pick the one for your carrier and follow the instructions. :highfive:

jethro650 said:
After your hooked up and Odin is open under the options on the left side check only Auto Reboot. On the right under files check PDA and use that button to browse your computer and find the cwm you downloaded from my dropbox. Then just hit start on the bottom of the Odin window and let it finish, your phone should reboot when its done. It will get stuck again like you described in your first post but pull the battery, put it back in and boot into recovery using vol up,home and power buttons. That should (if everything flashed OK) put you into cwm 5.5.0.4. Once there wipe data/factory reset then restore the back up you mentioned in your original post, that should get you running again.
---------- Post added at 06:05 PM ---------- Previous post was at 05:55 PM ----------
If something has happened to your backup then you could try the stock rooted stuff here , just pick the one for your carrier and follow the instructions. :highfive:
Click to expand...
Click to collapse
I was able to get it into recovery but i realized i did not have my sd card in so i turned it off and put my sd card in. unfortunately i was not able to get it back into recovery i tried flashing it again with the sd card in and no luck

That's odd. Couple of stupid questions on my part just to make sure, you had the right button combo, and, you released the buttons soon as the splash screen came on? Can you still get into download mode? Oh and did you do the wipes while in recovery?

jethro650 said:
That's odd. Couple of stupid questions on my part just to make sure, you had the right button combo, and, you released the buttons soon as the splash screen came on? Can you still get into download mode? Oh and did you do the wipes while in recovery?
Click to expand...
Click to collapse
oh my gosh THANK YOU SOOOMUCH. I was worried i would have to take it to at&t ill be sure to press the thanks button.

I take it you got your phone working lol. Glad I could help a little. Little advice, anytime you switch to a different type of ROM (aosp to stock based or the other way around) make sure you wipe data/factory reset before flashing anything. It will save you problems in the long run.
Oh and could you go back and edit your original post and just add solved in brackets to the title for people in trouble looking for info.

stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
Depending on which stock ROM you flashed with odin you should now have a recovery, if not then something isn't right. The full bone stock ROM should have the factory 3e recovery, and the root injected stock ROM should have some version of CWM recovery. A factory reset will most likely fix your boot loop, if there is no recovery flash the rooted stock ROM that matches your device from this guide.
Edit - Didn't see there was a second page 0_o

TWRP password?

I've been having some trouble trying to boot the latest AOKP for some reason, clean install didn't work so I restored a backup from recovery. After that, TWRP asked me for a password soon as I got into recovery. This is the first time I've seen this..and I figure that reflashing the recovery should be all I need to do, then I should be able to reflash AOKP and enjoy, right? Problem is, I can't find a .tar file as goo.im doesn't appear to want to give me the file. :crying:
So before I spend the rest of my day off on a wild chase for a simple file, can anyone tell me if I'm going about this the right way? My searching the issue hasn't yielded much in the way of results. Just want to get my phone back up and running!
EDIT:
I wasn't being clear enough. Despite restoring my backup, it force closed one thing or another every few seconds so I went to recovery to reflash. That's when things failed because of this password. I'm limited to download and recovery modes now, which isn't bad except for I still can't find a .tar to flash via Odin.

Reflashing TWRP hasn't resolved the password issue. Looks like I need to find a new angle..

what version are you on? did you just flash that same version?

Was at 2.5.0.0, and yes I reflashed the same one. I can't remember which version I was on before this one. Any recommendations?

perhaps revert to the previous release. if you're d2att, here's the link to the 2.4.4.0 tar

This version throws the same password prompt. I never set a password for this..didn't even know it was an option

Medlock87 said:
This version throws the same password prompt. I never set a password for this..didn't even know it was an option
Click to expand...
Click to collapse
Just went through trying different versions all the way back to 2.3.3.1 which I know I used for quite a while without any trouble. I want to try CWM but I can't find it in .tar form, just .img

WOW!! I found CWM version 5.8.4.7 on my computer's HDD, and so I flashed it. CWM wouldn't mount my external sd card where my ROM zips are. Got tired of messing with that and so I flashed back TWRP and it came back with the same password prompt. Great... Guess I'm flashing back to stock and starting over.

Medlock87 said:
Just went through trying different versions all the way back to 2.3.3.1 which I know I used for quite a while without any trouble. I want to try CWM but I can't find it in .tar form, just .img
Click to expand...
Click to collapse
follow this link to the root from recovery thread. download the root kit and flash the recovery.tar.md5 file. its an older cwm so after flashing, you have the option to download and flash a recovery flashable twrp zip (to see if that fixed the password issue) or remain on cwm and download/flash a new release
follow the link in my signature. at the bottom of post #2 are the download links for the latest releases to both cwm and twrp. flash in recovery, go to advanced and reboot recovery. presto
---------- Post added at 02:30 PM ---------- Previous post was at 01:48 PM ----------
that resolve your issue? cheers

xBeerdroiDx said:
follow this link to the root from recovery thread. download the root kit and flash the recovery.tar.md5 file. its an older cwm so after flashing, you have the option to download and flash a recovery flashable twrp zip (to see if that fixed the password issue) or remain on cwm and download/flash a new release
follow the link in my signature. at the bottom of post #2 are the download links for the latest releases to both cwm and twrp. flash in recovery, go to advanced and reboot recovery. presto
Click to expand...
Click to collapse
Thanks for that. Flashed a CWM 6.0.3.1 flashable zip after that, and now it's giving me an error trying to flash my ROM zip.. Status 7. Going to try redownloading it..
Update: "Install from sdcard complete." Was starting to think I'd never see those words. I'm sure it'll work now. Thanks so much for your time!

Grrr...It's still doing the same thing that started this adventure. Gets stuck at the underwear kernel loading screen and won't boot up.

CWM and TWRP nandroids are different. If you make a backup with TWRP you cant restore with CWM, and vice versa.

if you're still getting stuck on the loading screen, wipe data/factory reset in recovery and wipe cache. reboot and see if that fixes your issue

xBeerdroiDx said:
if you're still getting stuck on the loading screen, wipe data/factory reset in recovery and wipe cache. reboot and see if that fixes your issue
Click to expand...
Click to collapse
I've tried this many times, nothing's working. I got fed up and used ODIN to go back to stock, and now even THAT won't boot. Went to download, again flashed CWM and tried wiping cache, did a factory reset and fixed permissions. It STILL won't boot. I can't figure out what I did wrong to save my life. This all started with the same wipe procedures I always take when updating AOKP. I'm completely lost right now..
Maybe I spoke too soon. It went from the Samsung GSIII logo to the AT&T logo with startup sound after a long time..now it's sitting here at Samsung for..a long time. Maybe I haven't been giving it enough time.

When you use ODIN to flash back to stock, you usually have to boot into stock (not custom) recovery to wipe data and wipe cache. Otherwise the phone sits at the Samsung logo.

xBeerdroiDx said:
When you use ODIN to flash back to stock, you usually have to boot into stock (not custom) recovery to wipe data and wipe cache. Otherwise the phone sits at the Samsung logo.
Click to expand...
Click to collapse
So, boot into download mode and that will wipe cache? I'm not sure I understand. And you were right, it hasn't progressed past the samsun logo.

No, boot into the stock recovery mode that comes on the device. Don't flash the stock firmware and then flash cwm in order to wipe data and wipe cache. Just flash stock in ODIN with the auto reboot box unticked, when you get the PASS, unplug, pull battery, replace and immediately press the recovery mode button combo. This will place you in stock (Samsung) recovery. That's when you wipe data/factory reset and wipe cache. Reboot. It will take a few minutes to boot initially

xBeerdroiDx said:
No, boot into the stock recovery mode that comes on the device. Don't flash the stock firmware and then flash cwm in order to wipe data and wipe cache. Just flash stock in ODIN with the auto reboot box unticked, when you get the PASS, unplug, pull battery, replace and immediately press the recovery mode button combo. This will place you in stock (Samsung) recovery. That's when you wipe data/factory reset and wipe cache. Reboot. It will take a few minutes to boot initially
Click to expand...
Click to collapse
Will report in a few minutes. Thanks again for taking the time to help =)

When I went to recovery it showed the android guy with the little gearboxes. I guess that's what I was looking for? It rebooted by itself and now I'm just waiting for it.

Yup, that's what stock recovery looks like. Were you able to wipe data and cache before the reboot?

Cwm recovery looping help!!!!1

Hello,
I have a SGH-T989. I recently rooted it and installed cyanogenmod, with gapps and a custom kernel (AOSP UBER KERNEL). I think the kernel is the problem but i dont know how to attack it. Anyways, my phone is stuck on the cyanogenmod boot screen ( Teh one with the circle and cyanogenmod on the inside) and its not frozen, but wont go past that screen. So i tried booting into CWM Recovery, however, when i would i would get that screen as is i didnt have CWM ( the one with the warning about custom software, where u use volume up to continue and then install cwm with odin). So i just opened odin and installed cwm again, but now when i get into cwm, i see all the options,such as reboot system now, install zip from sd, wipe data, wipe ccache, backup, etc. However, i see it for about 5 seconds, then the screen goes black, then cwm comes up again and then repeat. I can go down like one option and then it goes black, then shows the same cwm screen again. Please help! Im a mad noob btw.

muneer123456 said:
Hello,
I have a SGH-T989. I recently rooted it and installed cyanogenmod, with gapps and a custom kernel (AOSP UBER KERNEL). I think the kernel is the problem but i dont know how to attack it. Anyways, my phone is stuck on the cyanogenmod boot screen ( Teh one with the circle and cyanogenmod on the inside) and its not frozen, but wont go past that screen. So i tried booting into CWM Recovery, however, when i would i would get that screen as is i didnt have CWM ( the one with the warning about custom software, where u use volume up to continue and then install cwm with odin). So i just opened odin and installed cwm again, but now when i get into cwm, i see all the options,such as reboot system now, install zip from sd, wipe data, wipe ccache, backup, etc. However, i see it for about 5 seconds, then the screen goes black, then cwm comes up again and then repeat. I can go down like one option and then it goes black, then shows the same cwm screen again. Please help! Im a mad noob btw.
Click to expand...
Click to collapse
I'd suggest to use odin and flash TWRP 2.6.1.0 in download mode, reboot and go into TWRP and do a full advanced wipe, dont wipe preload or it will fail, if you really want to wipe preload, then go into settings and change it to use rm -rf instead of format, shouldnt really need it tho, after wiping just reflash rom/gapps, wipe cache/davilk and reboot.

Thanks for the response. Im sorry but, how do I do that? is download mode the screen you get to when you hold the power button and volume buttons, and then let go of the power button? That screen is CWM for me, and I cant do anything in that mode due to every 5 seconds it stopping and restarting (CWM itself, not the entire phone). Thanks.

muneer123456 said:
Thanks for the response. Im sorry but, how do I do that? is download mode the screen you get to when you hold the power button and volume buttons, and then let go of the power button? That screen is CWM for me, and I cant do anything in that mode due to every 5 seconds it stopping and restarting (CWM itself, not the entire phone). Thanks.
Click to expand...
Click to collapse
Nope that's recovery, to get into download mode and flash TWRP recovery, make sure you have Odin3-v1.85 and the latest Samsung USB Drivers (Win 7/8/XP) and follow the instructions here, just ignore the part about rooting, get TWRP 2.6.1.0 flashed and then follow above posts suggestions.

Almite said:
Nope that's recovery, to get into download mode and flash TWRP recovery, make sure you have Odin3-v1.85 and the latest Samsung USB Drivers (Win 7/8/XP) and follow the instructions here, just ignore the part about rooting, get TWRP 2.6.1.0 flashed and then follow above posts suggestions.
Click to expand...
Click to collapse
Okay so, i flashed TWRP successfully, but now what do i do? in advanced wipe i wiped cache/dalvik, but now what do i do? is there any way i can go back to stock from here? or get cyanogenmod to work? I... oh sh*t, whilst typing this my phone worked, it just needed a minute for the firstboot of cyanoggin, THANK YOU SO MUCH, I LOVE YOU. Its people like you that make this world a better place. :highfive:

And one more thing buddy, i just wiped the dalvik/cache, i didnt reflash anything, play store seems to be working fine so, i believe i am good to go, let me know if i am missing anything.

muneer123456 said:
And one more thing buddy, i just wiped the dalvik/cache, i didnt reflash anything, play store seems to be working fine so, i believe i am good to go, let me know if i am missing anything.
Click to expand...
Click to collapse
You should be good, just make sure you didn't lose root access, I saw a post in the dev section with someone saying they lost root after flashing UBER kernel, but that might of just been something they did wrong on their end, not sure.