Develop Bugs

Samsung i780 - service menu?

Hi guys.. inspired by the *#0002*28346# code for changing volume (which works well by the way..) - I was wondering how to get to the following menu:
[1] Debug Screen [2] Version Information [3] RF Test [4] UMTS rf nv [5] Read gsm rf nv [6] Write gsm rf nv [7] NULL [8] Audio [9] Common ”€\ [1] Basic information ”Ź\ [2] MM Information [3] RR Information [4] GSM Neighbour Cell [5] GPRS Information [6] SIM Information [7] Handover [8] Phone control [9] Antenna & ADC Test
These strings (basic menu) and even more interesting ones(submenus),can be found in the i780_DXHC4_Rev12.img file, I guess it's some kind of service menu, yet I've no idea HOW to get to this menu... anyone does ?

inertiax3 said:
Hi guys.. inspired by the *#0002*28346# code for changing volume (which works well by the way..) - I was wondering how to get to the following menu:
[1] Debug Screen [2] Version Information [3] RF Test [4] UMTS rf nv [5] Read gsm rf nv [6] Write gsm rf nv [7] NULL [8] Audio [9] Common ”€\ [1] Basic information ”Ź\ [2] MM Information [3] RR Information [4] GSM Neighbour Cell [5] GPRS Information [6] SIM Information [7] Handover [8] Phone control [9] Antenna & ADC Test
These strings (basic menu) and even more interesting ones(submenus),can be found in the i780_DXHC4_Rev12.img file, I guess it's some kind of service menu, yet I've no idea HOW to get to this menu... anyone does ?
Click to expand...
Click to collapse
Check this out:
http://www.kobridge.com/forums/showpost.php?p=402&postcount=1
For example: *#0011# enables GSM NetMonitor (-alike)

eva_d said:
Check this out:
http://www.kobridge.com/forums/showpost.php?p=402&postcount=1
For example: *#0011# enables GSM NetMonitor (-alike)
Click to expand...
Click to collapse
Thanx, will take a look...

Hello guys. Actually, this is my first post on xda-dev. At the moment I don't know the code to get directly to the mentioned by inertiax3 service menu. But you can use code *#0011# to launch GSM NetMonitor and then press BACK button to get to service menu. Press BACK again to get to another menu.

VZW Dialer

I take no responsibility for any of the work or any of the codes posted i havent tested them all so use at your own risk. The codes were found on xda but ive lost track of that posting so if someone finds it id like to thank the person whom posted that aswell.
Thanks to:
BuzzFuzz
So after adding the contacts app i found in these forums i came across a nice little added joy if you will. The phone app and dialer in contacts work for samsung codes. this could be one step forward to flashing prl's and maybe even using tablet on cricket for voice and data.
Link to contact app:http://forum.xda-developers.com/showthread.php?t=907399
Codes:
*#0*# (General Test Mode)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
*7465625*782*# (Configure Network Lock NSP)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
Secret Codes- Some of these will only work with specific firmware
*#06# (Display IMEI number)*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)or *#7780#
*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)or *#272*HHMM#*
*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
*7465625*782*# (Configure Network Lock NSP)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)

i had find it for a long time....

xiongmx said:
i had find it for a long time....
Click to expand...
Click to collapse
Not sure what that means lol. This info is just compiled from cupple posts existing but figure it would be helpful to have it put together.
Sent from my SCH-I800 using XDA Premium App

I've been testing this and most of them work. Too bad the native dialer is not working...
msg on mobile

i agree wish native dialer worked but maybe this could be a stepping stone for further development. im interested in getting into developing for android but havent had the time to go do alot and alot of reading that its gonna take so maybe someone will come across this and take it up as a project.

(Req) dialer codes menu etc

Again title says it all thank you

tyshemi said:
Again title says it all thank you
Click to expand...
Click to collapse
*#06# (Display IMEI number)
*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)
or *#7780#
*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)
or *#272*HHMM#*
*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*782*# (Configure Network Lock NSP)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)

Great work thank you very much

Experts plz help me for Huawei E173u-2 USB modem.

Dear Sir Pls help me for my problem that i am facing.
I Accidently flashed "idea firmware" customized in my unlocked Stc Huawei E173u-2
Now my modem is locked and my device has changed to e1732. i have tried several firmware but its say modem inserted is not firmware .what is the solution pls help me.i am providing you detail of modem.
firmware info Before flashing firmware.
========================
Device
Device name: E173
Application port: COM14
Serial number: ADABYA9271403809
IMEI: 867749010913089
Hardware Version: CD1E153M
Firmware Version: 11.126.25.00.76
Software Version: 16.001.06.01.500 FaKiro
SIM/USIM
Own number(MSISDN): Unknown
Messages in SIM/USIM: 0 / 50
Contacts in SIM/USIM: 15 / 500
Message center number: +923189244444
PIN code status: Ready
Network status
Network name: Zong CMPak
RSSI: -73dBm
CS network registration: Registered
PS network registration: Registered
PS network attachment: Attached
Network settings
APN: zonginternet
Network selection mode: Automatic
:::::::
Firmware version after flashing
===========================
Device
Device name: E1732
Application port: COM19
Serial number: ADABYA9271403809
IMEI: 867749010913089
Hardware Version: CDXXXXX
Firmware Version: 11.126.16.01.356
Software Version: 23.009.17.00.035
SIM/USIM
IMSI number: 410060008853660
Own number(MSISDN): Unknown
Messages in SIM/USIM: Unknown
Contacts in SIM/USIM: Unknown
Message center number: Unknown
PIN code status: Ready
ICCID: 89410060900088536605
Network status
Network name: Unknown
Network type: No Service
Signal strength: 99, 99
RSSI: Unknown
RSQUAL(BER): 99
RSCP: -145
Ec/Io: -32
Cell ID: Unknown
LAC Code: Unknown
CS network registration: Not registered
PS network registration: Not registered
PS network attachment: Not attached
IPv4 address: Unknown
DNS server: Unknown
LTE band: Unknown
IPv6 address: Unknown
Network settings
APN: Unknown
Network selection mode: Automatic
Also when i flash with downgrader device name is changed to m6290 and then the system cant detect and NO application interface port is assigned to modem. Pls help me solve this problem.
Thanks in advance friend

Any one please help me ?

Engineering Mode HTC 10

How do I enter into Engineering Mode in HTC 10, not rooted or Unlocked. HTC 10 is Factory Unlocked.

djp007s29 said:
How do I enter into Engineering Mode in HTC 10, not rooted or Unlocked. HTC 10 is Factory Unlocked.
Click to expand...
Click to collapse
Codes
*#1234# -Display current firmware
*#*#4636#*#* -Diagnostic and general settings mode
*2767*4387264636# -To display product code
*#272*imei#* -Display/change CSC code
*#*#1472365#*#* -GPS test settings
*#*#197328640#*#* -Service mode main menu
*#12580*369# -SW & HW Info
*#232337# -Bluetooth Address
*#232331# -Bluetooth Test Mode
*#232338# -WLAN MAC Address
*#0228# -ADC Reading
*#32489# -Ciphering Info
*#2263# -RF Band Selection
*#9090# -Diagnostic Configuration
*#7284# -USB I2C Mode Control
*#232339# -WLAN Test Mode
*#0842# -Vibra Motor Test Mode
*#0782# -Real Time Clock Test
*#0673# -Audio Test Mode
*#872564# -USB Logging Control
*#4238378# -GCF Configuration
*#0283# -Audio Loopback Control
*#1575# -GPS Control Menu
*#3214789650# -LBS Test Mode
*#745# -RIL Dump Menu
*#03# -NAND Flash S/N
*#0589# -Light Sensor Test Mode
*#0588# -Proximity Sensor Test Mode
*#273283*255*3282*# -Data Create Menu
*#34971539# -Camera Firmware Update
*#526# -WLAN Engineering Mode
*#746# -Debug Dump Menu
*#9900# -System Dump Mode
*#44336# -Sofware Version Info
*#273283*255*663282*# -Data Create SD Card
*#3282*727336*# -Data Usage Status
*#7594# -Remap Shutdown to End Call TSK
*#0289# -Melody Test Mode
*#2663# -TSP / TSK firmware update
*#528# -WLAN Engineering Mode
*#7412365# -Camera Firmware Menu
*#07# -Test History
*#3214789# -GCF Mode Status
*#272886# -Auto Answer Selection
*#8736364# -OTA Update Menu
*#301279# -HSDPA/HSUPA Control Menu
*#7353# -Quick Test Menu
*2767*4387264636# -Sellout SMS / PCODE view
*#7465625# -View Phone Lock Status
*7465625*782*# -Configure Network Lock NSP
*7465625*27*# -Insert Network Lock Keycode NSP/CP
#7465625*27*# -Insert Content Provider Keycode
#7465625*782*# -Insert Partitial Network Lock Keycode
*7465625*77*# -Insert Network Lock Keycode SP
#7465625*77*# -Insert Operator Lock Keycode
*7465625*638*# -Configure Network Lock MCC/MNC
#7465625*638*# -Insert Network Lock Keycode