Dear Sir Pls help me for my problem that i am facing.
I Accidently flashed "idea firmware" customized in my unlocked Stc Huawei E173u-2
Now my modem is locked and my device has changed to e1732. i have tried several firmware but its say modem inserted is not firmware .what is the solution pls help me.i am providing you detail of modem.
firmware info Before flashing firmware.
========================
Device
Device name: E173
Application port: COM14
Serial number: ADABYA9271403809
IMEI: 867749010913089
Hardware Version: CD1E153M
Firmware Version: 11.126.25.00.76
Software Version: 16.001.06.01.500 FaKiro
SIM/USIM
Own number(MSISDN): Unknown
Messages in SIM/USIM: 0 / 50
Contacts in SIM/USIM: 15 / 500
Message center number: +923189244444
PIN code status: Ready
Network status
Network name: Zong CMPak
RSSI: -73dBm
CS network registration: Registered
PS network registration: Registered
PS network attachment: Attached
Network settings
APN: zonginternet
Network selection mode: Automatic
:::::::
Firmware version after flashing
===========================
Device
Device name: E1732
Application port: COM19
Serial number: ADABYA9271403809
IMEI: 867749010913089
Hardware Version: CDXXXXX
Firmware Version: 11.126.16.01.356
Software Version: 23.009.17.00.035
SIM/USIM
IMSI number: 410060008853660
Own number(MSISDN): Unknown
Messages in SIM/USIM: Unknown
Contacts in SIM/USIM: Unknown
Message center number: Unknown
PIN code status: Ready
ICCID: 89410060900088536605
Network status
Network name: Unknown
Network type: No Service
Signal strength: 99, 99
RSSI: Unknown
RSQUAL(BER): 99
RSCP: -145
Ec/Io: -32
Cell ID: Unknown
LAC Code: Unknown
CS network registration: Not registered
PS network registration: Not registered
PS network attachment: Not attached
IPv4 address: Unknown
DNS server: Unknown
LTE band: Unknown
IPv6 address: Unknown
Network settings
APN: Unknown
Network selection mode: Automatic
Also when i flash with downgrader device name is changed to m6290 and then the system cant detect and NO application interface port is assigned to modem. Pls help me solve this problem.
Thanks in advance friend
Any one please help me ?
Related
Most probably this is a stupid question for all of you out there, so please help me.
I got the following settings from Base Operator in Belgium but I can't find where I need to input this info.
The info which I got:
Homepage: http://wap.base.be
Type connection: passthrough (this is transalated from dutch:doorlopend)
Connection Security(transalated): off
Type: DATA
Number: +32486927927
IP port : for wap1:9201 wap2:5080
IP adress 172.031.198.037
verification type: Normal
Data Type: ISDN
Speed: 9600
user name: Base
Password: 1234
Where do I have to insert all that info so that I can get a wap connection with my Blue Angel.
P.S. Base does NOT have GPRS
Request not authorized to access Wap gateway for Airtel
Rom version:- D.07.60 RAN
ROM Date:- 02/01/08
Radio version:-1.04.02
protocol version 42.37.P8
ExtRom version: 2.07.60 RAN
how t o solved this problem ..........?
I am running Vista 64x and when i try to get hardspl, I get the message hardspl has stopped working, windows can check online for errors. after this nothing happens. Help
HERE IS MY ERROR REPORT
Problem Event Name: APPCRASH
Application Name: rapitool.exe
Application Version: 1.0.8.0
Application Timestamp: 47186633
Fault Module Name: RAPI.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e03824
Exception Code: c0000135
Exception Offset: 0006f04e
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: 9d13
Additional Information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
Additional Information 3: 9d13
Additional Information 4: 1abee00edb3fc1158f9ad6f44f0f6be8
My country is Hong Kong and can accept wifi ch 1 - 13. However, when I seleted 13 channels in [Advanced wifi] setting page, it show an error "There was a problem setting the regulatory domain" message .
Pls help to fix it and with thanks!!!
Rom Version: AuroraPlay_V0.4
Kernel : DooMkernel 14
Baseband : ver 67
===================================================================
DC - Unlocker 2 Client 1.00.1361
Detecting modem :
selection :
manufacturer - Huawei modems
model - Auto detect (recommended)
Found Applications port COM3
Found modem : E5372
Model : Huawei E5372 / MegaFon MR100-3
IMEI : 864578010634715
Serial NR. : N7GBY14725005690
Firmware : 21.290.19.00.401
Compile date / time : Mar 05 2015 19:14:46
Hardware ver. : CL1E5372SM
Dashboard version : WEBUI_17.100.08.00.401
SIM Lock status : Locked (Card lock)
Wrong codes entered : 10 (unlock attempts left : 0)
===================================================================