I take no responsibility for any of the work or any of the codes posted i havent tested them all so use at your own risk. The codes were found on xda but ive lost track of that posting so if someone finds it id like to thank the person whom posted that aswell.
Thanks to:
BuzzFuzz
So after adding the contacts app i found in these forums i came across a nice little added joy if you will. The phone app and dialer in contacts work for samsung codes. this could be one step forward to flashing prl's and maybe even using tablet on cricket for voice and data.
Link to contact app:http://forum.xda-developers.com/showthread.php?t=907399
Codes:
*#0*# (General Test Mode)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
*7465625*782*# (Configure Network Lock NSP)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
Secret Codes- Some of these will only work with specific firmware
*#06# (Display IMEI number)*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)or *#7780#
*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)or *#272*HHMM#*
*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
*7465625*782*# (Configure Network Lock NSP)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
i had find it for a long time....
xiongmx said:
i had find it for a long time....
Click to expand...
Click to collapse
Not sure what that means lol. This info is just compiled from cupple posts existing but figure it would be helpful to have it put together.
Sent from my SCH-I800 using XDA Premium App
I've been testing this and most of them work. Too bad the native dialer is not working...
msg on mobile
i agree wish native dialer worked but maybe this could be a stepping stone for further development. im interested in getting into developing for android but havent had the time to go do alot and alot of reading that its gonna take so maybe someone will come across this and take it up as a project.
Related
Hi guys.. inspired by the *#0002*28346# code for changing volume (which works well by the way..) - I was wondering how to get to the following menu:
[1] Debug Screen [2] Version Information [3] RF Test [4] UMTS rf nv [5] Read gsm rf nv [6] Write gsm rf nv [7] NULL [8] Audio [9] Common ”€\ [1] Basic information ”Ź\ [2] MM Information [3] RR Information [4] GSM Neighbour Cell [5] GPRS Information [6] SIM Information [7] Handover [8] Phone control [9] Antenna & ADC Test
These strings (basic menu) and even more interesting ones(submenus),can be found in the i780_DXHC4_Rev12.img file, I guess it's some kind of service menu, yet I've no idea HOW to get to this menu... anyone does ?
inertiax3 said:
Hi guys.. inspired by the *#0002*28346# code for changing volume (which works well by the way..) - I was wondering how to get to the following menu:
[1] Debug Screen [2] Version Information [3] RF Test [4] UMTS rf nv [5] Read gsm rf nv [6] Write gsm rf nv [7] NULL [8] Audio [9] Common ”€\ [1] Basic information ”Ź\ [2] MM Information [3] RR Information [4] GSM Neighbour Cell [5] GPRS Information [6] SIM Information [7] Handover [8] Phone control [9] Antenna & ADC Test
These strings (basic menu) and even more interesting ones(submenus),can be found in the i780_DXHC4_Rev12.img file, I guess it's some kind of service menu, yet I've no idea HOW to get to this menu... anyone does ?
Click to expand...
Click to collapse
Check this out:
http://www.kobridge.com/forums/showpost.php?p=402&postcount=1
For example: *#0011# enables GSM NetMonitor (-alike)
eva_d said:
Check this out:
http://www.kobridge.com/forums/showpost.php?p=402&postcount=1
For example: *#0011# enables GSM NetMonitor (-alike)
Click to expand...
Click to collapse
Thanx, will take a look...
Hello guys. Actually, this is my first post on xda-dev. At the moment I don't know the code to get directly to the mentioned by inertiax3 service menu. But you can use code *#0011# to launch GSM NetMonitor and then press BACK button to get to service menu. Press BACK again to get to another menu.
Again title says it all thank you
tyshemi said:
Again title says it all thank you
Click to expand...
Click to collapse
*#06# (Display IMEI number)
*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)
or *#7780#
*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)
or *#272*HHMM#*
*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*782*# (Configure Network Lock NSP)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
Great work thank you very much
Samsung Hidden Codes
Not all work due to android o.s. changes and some may be missing
*#TESTMODE#
*#03# Nand Flash Unique Number
*#06# IMEI INFO.
*#745#
*#746#
*#0011# ServiceMode
*#0514# SysDump (shorter list)
*#0808# Qualcom USB settings
*#1111#
*#1575#
*#2222#
*#2263# ServiceMode - toggle Auto/WCDMA/GSM/LTE bands and modes
*#2580#
*#2684#
*#2866#
*#7284# Qualcom USB settings
*#8888# ServiceMode - READ FTA HW VERSION
*#9090# ServiceMode - DIAG CONFIG
*#9900# SysDump
*#32489#
*#66336# ServiceMode - MDM Ramdump mode
*#123456#
*#147852#
*#279301#
*#301279#
*#369852#
*#1478963#
*#3214789#
*#3698741#
*#4238378#
*#5337632#
*#6984125*#
*#22553767#
*#22558463# ResetTotalCallTime
*#73876766#
*#99007788#
*#197328640# ServiceMode - DEBUG SCREEN (1 Basic Information - same as 0011)
*#2767*2878#
*#738767633#
*#3214789650#
*#7387678387#
*#7387677763#
*#4387264636#
*#27663368378# ServiceMode - MAIN MENU (7 DEBUG SCREEN)
*#827828868378#
*#*#4636#*#* phone information
*2767*3855# hard reset
*#*#7780#*#* factory reset
*#*#7594#*#* change end call/power option
*#*#197328640#*#* service mode
*#*#273283*255*663282*#*#* file copy screen (backup media files)
*#*#526#*#* wlan test
*#*#232338#*#* shows wifi mac address
*#*#1472365#*#* gps test
*#*#1575#*#* another gps test
*#*#232331#*#* bluetooth test
*#*#232337#*# shows bluetooth device address
*#*#8255#*#* gtalk service monitor
Samsung Secrets Code
*#*#0283#*#* packet loopback
*#*#0*#*#* lcd test
*#*#0673#*#* melody test
*#*#0842#*#* device test (vibration test and backlight test)
*#*#2663#*#* touch screen version
*#*#2664#*#* touch screen test
*#*#0588#*#* proximity sensor test
*#*#3264#*#* ram version
Samsung Secrets codes to get firmware version information:
*#*#4986*2650468#*#* pda, phone, h/w, rfcalldate
*#*#1234#*#* pda and phone
*#*#1111#*#* fta sw version
*#*#2222#*#* fta hw version
*#*#44336#*#* pda, phone, csc, build time, changelist number
*#272*IMEI# - To change the salescodes and reset the user data
Hi,
I am looking for a way to unlock WWAN Novatel E362 (Dell WWAN DW5802).
Any suggestion?
I have tryed:
-----------------------------------------------------
DC - Unlocker 2 Client 1.00.0460
Detecting card :
selection :
manufacturer - Novatel
model - Auto detect
Found modem : E362 WWAN
IMEI : 990000469550273
Firmware : 4.08
SIM Lock status : Locked (PH-NET PIN)
sorry, this card not supported !
Please, check manufacturer's selection !
------------------------------------------------------
How do I enter into Engineering Mode in HTC 10, not rooted or Unlocked. HTC 10 is Factory Unlocked.
djp007s29 said:
How do I enter into Engineering Mode in HTC 10, not rooted or Unlocked. HTC 10 is Factory Unlocked.
Click to expand...
Click to collapse
Codes
*#1234# -Display current firmware
*#*#4636#*#* -Diagnostic and general settings mode
*2767*4387264636# -To display product code
*#272*imei#* -Display/change CSC code
*#*#1472365#*#* -GPS test settings
*#*#197328640#*#* -Service mode main menu
*#12580*369# -SW & HW Info
*#232337# -Bluetooth Address
*#232331# -Bluetooth Test Mode
*#232338# -WLAN MAC Address
*#0228# -ADC Reading
*#32489# -Ciphering Info
*#2263# -RF Band Selection
*#9090# -Diagnostic Configuration
*#7284# -USB I2C Mode Control
*#232339# -WLAN Test Mode
*#0842# -Vibra Motor Test Mode
*#0782# -Real Time Clock Test
*#0673# -Audio Test Mode
*#872564# -USB Logging Control
*#4238378# -GCF Configuration
*#0283# -Audio Loopback Control
*#1575# -GPS Control Menu
*#3214789650# -LBS Test Mode
*#745# -RIL Dump Menu
*#03# -NAND Flash S/N
*#0589# -Light Sensor Test Mode
*#0588# -Proximity Sensor Test Mode
*#273283*255*3282*# -Data Create Menu
*#34971539# -Camera Firmware Update
*#526# -WLAN Engineering Mode
*#746# -Debug Dump Menu
*#9900# -System Dump Mode
*#44336# -Sofware Version Info
*#273283*255*663282*# -Data Create SD Card
*#3282*727336*# -Data Usage Status
*#7594# -Remap Shutdown to End Call TSK
*#0289# -Melody Test Mode
*#2663# -TSP / TSK firmware update
*#528# -WLAN Engineering Mode
*#7412365# -Camera Firmware Menu
*#07# -Test History
*#3214789# -GCF Mode Status
*#272886# -Auto Answer Selection
*#8736364# -OTA Update Menu
*#301279# -HSDPA/HSUPA Control Menu
*#7353# -Quick Test Menu
*2767*4387264636# -Sellout SMS / PCODE view
*#7465625# -View Phone Lock Status
*7465625*782*# -Configure Network Lock NSP
*7465625*27*# -Insert Network Lock Keycode NSP/CP
#7465625*27*# -Insert Content Provider Keycode
#7465625*782*# -Insert Partitial Network Lock Keycode
*7465625*77*# -Insert Network Lock Keycode SP
#7465625*77*# -Insert Operator Lock Keycode
*7465625*638*# -Configure Network Lock MCC/MNC
#7465625*638*# -Insert Network Lock Keycode