Develop Bugs

So my ET4G wont charge the batt. but will connect to everything else just fine

So not 100% sure as to why this happed, but I did bring it to the sprint store they told me there was some corrosion found in the charging port. Which in means there unwilling to even look at my ET4G luck has it I did get the ins. coverage...But I'm not ready to just roll over and give up that easily. What i find strange is that I have absolutely no problems connecting!? I can flash with Odin/mount usb/SD card and usb tethering.???? When I plug my phone in it will start charging then in less then a min it stops...if I check the battery info page it will change from discharging to charging for just a short time when connected to power (usb or charger) then goes to not charging...After downloading and testing (one at a time) a few battery apps found in the market I noticed that my battery temp is reading at 6C and when I'm really using it and its pretty hot to touch the highest reading I've gotten is 13C now I don't know what translates into as far as F but I know that its way to low to be correct...So I figured I'd get the possibility for it being a software issue outta the way by flashing back to stock and trying a few combos of Roms and kernels making sure to wipe and keep the Roms absolutely as they came unless I needed to add gapps...I quickly got an error upon plugging in stating "charging stopped battery temp to low." and every touchwiz based ROM I use gives me the same error...So I've come to the conclusion that I somehow got my phone damp/wet and fried the temp sensor...So unless I can replace that for cheaper then 100$ fixing the hardware is useless but
I was mostly interested in what apk/receiver is responsible for telling my OS to not accept the charge b/c its to cold and if I can just disable it in autostart manager or if theres another work around to force my battery to take the charge (I know there is a probably gonna be a risk of over charging/over heating etc etc etc but either way I'm gonna end up dishing out the 100.00 due to the pure inconvenience)
**I should also note I have tried 2 OEM chargers 1 after market car charger 2 OEM batteries and 6 different (two different brands) of after market batteries all of them work for other ET4g's and all of the batteries will take a good clean 100% charge from a wall charger or in my wifes ET4G....
Of course if theres no fix which I'd find hard to believe said phone might just end up at the bottom of a a lake...if sprint will still honor there replacement police in that case????
I'd like to use the "lake" phone as mod fodder for our current Emmc issue once we get a "possible fix"not just a random shot in the dark, but if we get what is believe to be a fix I'll be happy to follow a Dev's step by step instructions, and log my findings to help out! With that being said thank you for taking the time to read my monster of a post, and any advise into this issue is much appreciated

I would also like to know if there is anyway to fix this problem...
My wife, being 36 weeks pregnant is kinda forgetful suddenly.
She lost her phone for about a week we searched everywhere, cleaned the house many times, cleaned out the car, search for a week.
the amazing thing is she lost it walking from the bed room to the car, she was in the car when she realized it was missing maybe 2-3 minutes after leaving... long story short...
I went walking and found it on the side of the road... a week later with the case and battery cover off laying face down on the grass. I got it home took it apart, dried it out, and amazingly it still works the only thing wrong with it is the Battery saying its at 6°F and wont charge, Its stock ive tried factory reset didn't work. I have the same phone i can charge the battery in my phone but cant charge either battery's in her phone.
Would there be a way to fake the sensor?
Force it to say a higher number?

DarkSim2o9 said:
I would also like to know if there is anyway to fix this problem...
My wife, being 36 weeks pregnant is kinda forgetful suddenly.
She lost her phone for about a week we searched everywhere, cleaned the house many times, cleaned out the car, search for a week.
the amazing thing is she lost it walking from the bed room to the car, she was in the car when she realized it was missing maybe 2-3 minutes after leaving... long story short...
I went walking and found it on the side of the road... a week later with the case and battery cover off laying face down on the grass. I got it home took it apart, dried it out, and amazingly it still works the only thing wrong with it is the Battery saying its at 6°F and wont charge, Its stock ive tried factory reset didn't work. I have the same phone i can charge the battery in my phone but cant charge either battery's in her phone.
Would there be a way to fake the sensor?
Force it to say a higher number?
Click to expand...
Click to collapse
i used alcohol sani wipes from a hosptial and a pick cleanded ever pices that was white/green left it to dry for the night its like new

kingsblend420 said:
i used alcohol sani wipes from a hosptial and a pick cleanded ever pices that was white/green left it to dry for the night its like new
Click to expand...
Click to collapse
That's what I had to do... clean the contacts with rubbing alcohol and something that can get into the port and remove any debris - a cotton swab, towel, anything... then try again until it works.
Here's the pinout schematic:
http://pinoutsguide.com/PortableDevices/micro_usb_pinout.shtml
So it's possible to have one and not the other if contact is not being made.

I had to go as far add cleaning all the way up the main board and all every contact point from port to battery

If the phone works just fine go on eBay and grab an external charger and spare battery. I got one for $8 with generic battery. Works great.

someguyatx said:
If the phone works just fine go on eBay and grab an external charger and spare battery. I got one for $8 with generic battery. Works great.
Click to expand...
Click to collapse
Here's the thing. This not working is a sign of other issues. If you see corrosion like this and you don't address it it will lead to bad things. Better to remove any corrosion while it's minor IMHO.

garwynn said:
Here's the thing. This not working is a sign of other issues. If you see corrosion like this and you don't address it it will lead to bad things. Better to remove any corrosion while it's minor IMHO.
Click to expand...
Click to collapse
Just realized the OP here was from May, Wonder what happened. I was reading the second post about the phone on the side of the road thinking it was from the same person. In that case they are lucky it still works and any damage is likely done

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I fixed it cleaning it with them wipes worked amazing I would recommend them for anyone that is constantly cleaning grim out of used phones
Sent from my SPH-D710 using Tapatalk 2

[Q] need some help going back to stock

OK so i know this info is scattered around, but frankly i am a little confused at this point. i'll start with my situation.
i'm running slick ricks AOKP JB rom. i was on build three for very long, skipping several updates until milestone 1.2. i did a dirty flash (right over build three) and it seemed to work, until i started to have battery issues. my phone would die if i used it for more than a minute anywhere under 60%, and was unable to power back on. upon plugging it in, the battery started charging right back up from 60% or whatever percentage it died at. i blame my dirty flash. i upgraded to 1.3 and it's even worse, it dies anywhere under 90% now.
so, i was thinking i need to just bite the bullet and start from el26 with cwm. but i started to get confused at about this point. if i'm using a jellybean rom, do i need to use "JB Touch-Wiz Based Kernels" or is it okay to flash from el26?
second, it has been very very long since i had to go back to stock and i was just gonna try and start from el26 and see how it went, without bothering yall. i clicked on the link in the sticky thread w/ all the kernels and get redirected to a new repository. can someone confirm that this section is what i want to be using? and the oneclick exes are probably most dummy proof, yes?
thanks in advance guys. i was never very pro at this, and now i'm just in need of some clarification.
edit:
knew i was missing something... http://forum.xda-developers.com/showthread.php?t=1903252 flashing now and i'll report back.

ok. i'm on gingerbread for now. gosh touch wiz is sooo ugly why samsung....
anyway the battery is still out of control. the black gaps are where it dies.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

husker apollo said:
ok. i'm on gingerbread for now. gosh touch wiz is sooo ugly why samsung....
anyway the battery is still out of control. the black gaps are where it dies.
View attachment 1516719
Click to expand...
Click to collapse
Before you do anything else please pull the battery and try to spin it on a flat surface.
$100 says it spins... and all your problems are due to a bad battery.
Exchange it, replace it.. and those problems will go away. :angel:

garwynn said:
Before you do anything else please pull the battery and try to spin it on a flat surface.
$100 says it spins... and all your problems are due to a bad battery.
Exchange it, replace it.. and those problems will go away. :angel:
Click to expand...
Click to collapse
wow i have been wanting to just throw my phone at a wall for like 2 weeks now. it does spin, and it's noticably bloated looking and i never even thought to look at it like that... OOOMMGGG. haha. ok. so i have a spare battery but it's only 1500 mah so i usually keep it swapped out. going to do some testing here. this is nuts. so its possible i never even truly needed to go back to stock even...
but yea it spins on both sides. my extra is totally flat. that's amazing.
edit:
so i pay the 8 bux a month or whatever, on my bill, thru sprint for the warranty. is the battery covered? anyone know if its worth going to a store to try and get a free replacement?

husker apollo said:
wow i have been wanting to just throw my phone at a wall for like 2 weeks now. it does spin, and it's noticably bloated looking and i never even thought to look at it like that... OOOMMGGG. haha. ok. so i have a spare battery but it's only 1500 mah so i usually keep it swapped out. going to do some testing here. this is nuts. so its possible i never even truly needed to go back to stock even...
but yea it spins on both sides. my extra is totally flat. that's amazing.
edit:
so i pay the 8 bux a month or whatever, on my bill, thru sprint for the warranty. is the battery covered? anyone know if its worth going to a store to try and get a free replacement?
Click to expand...
Click to collapse
Go in and show them it spins. Any store supporting TEP should replace it for free. If you have time call ahead and make sure you get that same answer as well as a name to hold accountable. Should avoid most hassles that way.
Sent from my SPH-D710 using Tapatalk 2

garwynn said:
Go in and show them it spins. Any store supporting TEP should replace it for free. If you have time call ahead and make sure you get that same answer as well as a name to hold accountable. Should avoid most hassles that way.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
just reporting in 24 hours later, my spare battery has no issues. it's very likely i never had to go thru the hassle of going back to stock. i'm on slick's 1.3 build again and happy happy happy. hopefully this info helps out anyone else with bizarre power issues. i'm going to go into a sprint shop over the weekend and see if i can't get a free replacement for the samsung battery, i'll let y'all know how that goes.

How do I use the Moto 360? Is it usable in any way?

This may sound like a stupid question but I bought this watch a day ago and I still can't find a way to use it. It's ridiculous.
At first it won't power on as per instruction provided in the package. So I let it charge and it powered on automatically only to start discharging while charging. Then it turned off because it discharged on the charged... Somehow I managed to charge it by manually powering off the watch every few minutes.
So then I paired it with the phone and 15 mins later it got unpaired. I found out I can't pair it again - I must reset. Eventually it paired again, however it kept discharging while on the charging station. I turned airplane mode on, then I turn it off and eventually it charged. Then I immediately initiated the the firmware update to download and somehow I was able to update. So now it charges and discharges fine.
I've never in my life have seen any device be so hard to setup and get going - and I'm an engineer - I can only imagine how normal users keep returning those because they are not usable.
Sorry for the long post but back to my stupid question. How do you guys use this watch. It is totally unusable.
1) I can't use any apps. I'd say "Ok google, show me my steps.". The app will load I'll swipe to see the next screen and in less then 2-3 sec the screen turns off.
2)I tried "Ok goolge send an em..." and the screen turns off. I tried again "Ok google send an email". It asks to whom and while I speak the name - the screen turns off.
Why is ti turning off while I'm in the middle of answering a questions? I tried and tried - I was unable to use anything.
I tried the navigation while driving - very bad idea - I almost crashed my car. It will show me the direction like- go left on whatever and then turns off immediately. I look at the watch again - but no more directions - it don't care that I want direction...
I'd appreciate some tips from users that had the watch for a longer time.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

The fact that you are unable to charge it as expected tells me that you have a defective device. Get it exchanged now. Don't bother trying to figure out why you can't set it up or use an app etc.

Yeah. I should have read the other threads before posting. I'm going to return it to BestBuy for a refund today.
I wonder if I should claim it's defective or that I simply can't understand how to use it and don't want/like it anymore?

I you just bought it, tell them it don't work and exchange for a new one. Otherwise, you're just causing problems for somebody else if they shelf it for resale again. There's a reason they have exchange/refund policies.
Sent from my SM-N900W8 using Tapatalk

Yep - returned it as broken
I didn't get a replacement - I'm afraid it'll have the same issues. Feels like it was a software bug so I'm not taking more chances. Perhaps it doesn't work well with Android 5.1 yet.
I'll wait for a newer model.

What phone were you using?

Mine lasts for days and days, I have found that some watchfaces can take a chunk out of my battery.
But if its not turning on and you have reset it the exchange it or get a refund. I can't live without mine, so useful and handy. Besides it looks good ?

I do not think you know what you're talking about OP. But I do agree your device had to be defective, which does suck.

It's broken, I doubt the other replacements will do the same thing

Recumbent trikes in NC

The glass is so easy to get broken.Any protection for it.

Yes, I got a tempered glass protector at bestbuy when I bought the watch. No idea what brand it was. Hard to center because youre putting a circle inside a circle.

v3ngence said:
What phone were you using?
Click to expand...
Click to collapse
HTC One M8 (Google Play Edition). It just updated to Android 5.1;
I ended up buying the Moto 360 again. Got it from T-Mobile like 30 mins ago.
Yet again the watch wont start out of the box.
Charging it - I hope this one doesn't discharge while on the charger. We'll see...
EDIT: Yes this one works very well. The old one probably had some sensor broken.

violinbg said:
HTC One M8 (Google Play Edition). It just updated to Android 5.1;
I ended up buying the Moto 360 again. Got it from T-Mobile like 30 mins ago.
Yet again the watch wont start out of the box.
Charging it - I hope this one doesn't discharge while on the charger. We'll see...
EDIT: Yes this one works very well. The old one probably had some sensor broken.
Click to expand...
Click to collapse
I had the same thing happen (the not turning on/charging thing) when I got mine. There will also, apparently, come a time when it drains abruptly then not turn on. Then you have to charge it for at least 5 hours, hold the power button down for 30 seconds, release and hold down again. Still, when it's working it's pretty neat.

CASz said:
I had the same thing happen (the not turning on/charging thing) when I got mine. There will also, apparently, come a time when it drains abruptly then not turn on. Then you have to charge it for at least 5 hours, hold the power button down for 30 seconds, release and hold down again. Still, when it's working it's pretty neat.
Click to expand...
Click to collapse
I managed to fix the charging issue but the device was unusable. It would turn the screen off randomly in the middle of command.
The new one works great. It too had no charge out of the box but it charged to 30% in like 15-20 mins and then turned on by itself.

Possible BIG issue with WW-5.17.44.68

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I just wanted to post a short topic letting other users know that there may be a charging issue with WW-5.17.44.68. A couple of days after updating to the most recent firmware I suddenly began having charging issues with my Zenfone 3 Deluxe special edition. Shortly after hooking up the factory charger I would receive this error message accompanied by the same alert sound that Amber Alerts use. The only way I was able to get the phone to charge at all was to roll back to my pre WW-5.17.44.68 nandroid. Trying different chargers with different cables made zero difference. The error is dead on as pulling out the USB cord you can clearly feel it is quite hot. Ignoring or missing this error will most likely guarantee a fried charge port (minimal)! Immediately after installing my backup all issues went away. I am currently charging with the factory charger and cable now without heat/error.

Sandman45654 said:
View attachment 4409791
I just wanted to post a short topic letting other users know that there may be a charging issue with WW-5.17.44.68. A couple of days after updating to the most recent firmware I suddenly began having charging issues with my Zenfone 3 Deluxe special edition. Shortly after hooking up the factory charger I would receive this error message accompanied by the same alert sound that Amber Alerts use. The only way I was able to get the phone to charge at all was to roll back to my pre WW-5.17.44.68 nandroid. Trying different chargers with different cables made zero difference. The error is dead on as pulling out the USB cord you can clearly feel it is quite hot. Ignoring or missing this error will most likely guarantee a fried charge port (minimal)! Immediately after installing my backup all issues went away. I am currently charging with the factory charger and cable now without heat/error.
Click to expand...
Click to collapse
That's rough. I haven't bothered with the update because it's too much of a hassle right now to go to stock recovery and update. I think your best bet would be to stay on your backed up firmware and wait out the Oreo update (which should be soon as well.)
Thanks for the heads up. Hopefully it isn't a widespread issue.

asianflipboy said:
That's rough. I haven't bothered with the update because it's too much of a hassle right now to go to stock recovery and update. I think your best bet would be to stay on your backed up firmware and wait out the Oreo update (which should be soon as well.)
Thanks for the heads up. Hopefully it isn't a widespread issue.
Click to expand...
Click to collapse
After feeling how hot the USB port/plug got I am in no hurry to try it again! I could even smell the charge board heating up. That is quite a gut-wrenching smell when it comes to a phone costing as much as this one. I too hope that it isn't a widespread issue.
I completed a full wipe before installing the firmware and tried multiple USB cords and chargers after. The only thing that fixed the issue was downgrading. That leaves the firmware as the main suspect which is why I decided to post my findings.
If anyone is considering updating PLEASE have a recent nandroid FIRST.

Thanks for the warning, indeed they did add battery improvement to the changelog....
I did update to the newest firmware and I am charging using Zenfone 2 chargers, I just checked it out and it doesn't seem too hot.... maybe it applies only to QuickCharge chargers....
though I do have an issue that when my phone is locked (aka screen is turned off, phone is running... sleep mode) I have some screen flickering... the whole screen flashes white for just one second before turning off again... kinda annoying as it also wastes a lot of battery

Chaosruler said:
Thanks for the warning, indeed they did add battery improvement to the changelog....
I did update to the newest firmware and I am charging using Zenfone 2 chargers, I just checked it out and it doesn't seem too hot.... maybe it applies only to QuickCharge chargers....
though I do have an issue that when my phone is locked (aka screen is turned off, phone is running... sleep mode) I have some screen flickering... the whole screen flashes white for just one second before turning off again... kinda annoying as it also wastes a lot of battery
Click to expand...
Click to collapse
If I recall correctly the Zenfone 2 charger supports the same range of voltages. 5-9-12 volts with varying amperage.
Your screen issues could quite possibly be caused by a rogue app. I've noticed using the "Always On" feature my phone will flash white from time to time. Not the entire screen mind you, just the clock being shown with full brightness for one cycle. If you have TWRP installed it would be worth a backup/wipe to see if it is indeed software. Good luck with your issue
Good news time for everyone except me! After charging the phone twice the error message has shown its ugly face once again. So it seems that my phone is actually to blame :'-( I've cleaned the USB-C port with some contact cleaner sprayed onto a small piece of folded paper. So far it seems to have done the trick. USB-C is great for ease of use but not so great for keeping debris out.

I have found the actual cause of my issues. It's an unusual one so I thought I should share. It turns out that an old florescent table lamp I recently started using again basically turned itself into an EMP device. All of the electromagnetic interference feeding back through the surge protector has caused both my phone charger and my 6 bay 18650 (vaporizer) battery charger to malfunction. After unplugging the lamp the overheating issue has stopped. The phone charger no longer quick charges but I'll take that over a dead phone any day! The issue with my 6 bay charger, if you were curious is that I have to power cycle it each time i want to establish a bluetooth connection now. Its crazy some of the curveballs life can throw your way!

asianflipboy said:
That's rough. I haven't bothered with the update because it's too much of a hassle right now to go to stock recovery and update. I think your best bet would be to stay on your backed up firmware and wait out the Oreo update (which should be soon as well.)
Thanks for the heads up. Hopefully it isn't a widespread issue.
Click to expand...
Click to collapse
It should be soon but unfortunately it won't be...

Atoto A6 Fast Boot Not Working

I love the A6 unit that I have but last week it lost the fast boot feature. At key off it shuts down and loses some settings and the time. I pulled the dash and the yellow wire has power when the key is off. I had installed the new firmware several weeks ago so it's been updated. Any suggestions? I emailed them but have not heard back.

I'm having basically the same issue. When the car has been turned off 80% of the time the head unit does a complete boot up. Sometimes it does it if the car is turned off and immediately turned back on. I also have lost settings suck as time. Everything else works perfectly and I haven't had any other issues as of yet. Had it for about a week now.

Ronin1767 said:
I'm having basically the same issue. When the car has been turned off 80% of the time the head unit does a complete boot up. Sometimes it does it if the car is turned off and immediately turned back on. I also have lost settings suck as time. Everything else works perfectly and I haven't had any other issues as of yet. Had it for about a week now.
Click to expand...
Click to collapse
Just make sure the yellow wire has constant power even when the key is off. They made me jump through a bunch a hoops to get any action. I had to submit several videos and then they sent me a power adapter that plugged into a wall outlet to bypass the truck wiring and I had to video that also. They finally agreed to replace the radio with me sending the old one back first. I ended up keeping it and they gave me 20% off a Pro unit with the gestures. The day after I bought it they dropped the price on it 20.00. If I had it to do over again I'd just trade it for another and save the money. I doubt I'll be able to sell this old one with the problem it has. Let me know how it goes with them. It was probably a month of emails back and forth before I had a remedy.

garyhesq said:
Just make sure the yellow wire has constant power even when the key is off. They made me jump through a bunch a hoops to get any action. I had to submit several videos and then they sent me a power adapter that plugged into a wall outlet to bypass the truck wiring and I had to video that also. They finally agreed to replace the radio with me sending the old one back first. I ended up keeping it and they gave me 20% off a Pro unit with the gestures. The day after I bought it they dropped the price on it 20.00. If I had it to do over again I'd just trade it for another and save the money. I doubt I'll be able to sell this old one with the problem it has. Let me know how it goes with them. It was probably a month of emails back and forth before I had a remedy.
Click to expand...
Click to collapse
I'm pretty sure I connected the yellow wire to the constant power correctly because it will work fine and boot instantly when I turn the car on but sometimes it won't. It's a bit frustrating but if that's the only issue I really have then so be it. Over all it's a decent head unit in my opinion. I guess that's just aftermarket BS when you install yourself.

Hello yall, well I bought atoto A6 and each time it was booting long, like the first time. So it the problem with the wires that goes with the mmc.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so the yellow and red wires are messed up. Or at least look for the right position of all wires. On the picture they are messed up so if U have wire same way than u need to switch em betwin and it will bot up crazy fast

Can you explain a little bit more about the process?
I have the same problem when I switch off the car, do I have to invert the yellow and red cable in the connector?

My iso harness had red and yellow swapped wrong. I had to use big paper clip to swap cables on the iso plug. Now it works like it should. Yellow is battery and also fatter cable. Red one is thinner. Google: iso harness pinout for reference.

Car battery needs replacement
I noticed that i lost my fast boot. But when i change my car battery everything turns fine.

Ives14344 said:
I noticed that i lost my fast boot. But when i change my car battery everything turns fine.
Click to expand...
Click to collapse
Where you having the issue of it randomly shutting down overnight instead of sleeping? Think I'll change the battery too I've tried everything else...

Yup everything turn off including my car turbo timer