Using CWM to flash the ROM, I updated CM10.0 to CM10.1.2. After that I could no longer get into recovery mode. It's as if CWM is just not there.
What can I do about this?
Thanks for any help.
twitchchris said:
Using CWM to flash the ROM, I updated CM10.0 to CM10.1.2. After that I could no longer get into recovery mode. It's as if CWM is just not there.
What can I do about this?
Thanks for any help.
Click to expand...
Click to collapse
Reboot to Recovery flash a new CWM, if you cannot go to recovery, go to download mode, flash a new CWM via odin
Related
Cannot boot into recovery after upgrading via rom manger using ClockworkMod any clue on how to fix this would be greatly appreciated thanks.
Reflash the recovery via ROM Manager
omarsalmin said:
Reflash the recovery via ROM Manager
Click to expand...
Click to collapse
Thanks but not working phone boots up fine just can't get into recovery.
Got it to work had to flash an older recovery.
I downloaded ROM manager, flashed CWM as instructed. I then booted to recovery but the ACS CWM beta was still there. Am I supposed to flash it in recovery mode?
tedcousens said:
I downloaded ROM manager, flashed CWM as instructed. I then booted to recovery but the ACS CWM beta was still there. Am I supposed to flash it in recovery mode?
Click to expand...
Click to collapse
It will only change cwm via rom manager, you will still have your old recovery on three finger boot.
Sent from my SPH-D700 using xda premium
tedcousens said:
I downloaded ROM manager, flashed CWM as instructed. I then booted to recovery but the ACS CWM beta was still there. Am I supposed to flash it in recovery mode?
Click to expand...
Click to collapse
If you flash the zip using your old CWM it will replace it. You cal also odin the tar version. Either will work with 3 finger salute.
Flashed it, but now can't mount SD from recovery. I'm on EI22 stock rooted. Do I need to re-odin everything? Thanks.
I have 5.0.2.7 cwm, and if i install cm 10.1 or 10.2 it bootloops, i also installed UVMC6 radio for those roms. Issue is that i cant install other recovery when i try to install it says aborted, or using odin its just dont send error. any help fast?
you CWM is outdated bro and stick to 4.2.2 ROMs the newest 4.3 has issues for the moment, GRAB TWRP from here http://teamw.in/project/twrp2/101 load it up through odin and flash that........ your CWM does not flash these newer ROMs, if you want to stay on CWM then you have to upgrade it to a newer recovery ??? what else are you stuck on bro
Fulfen said:
I have 5.0.2.7 cwm, and if i install cm 10.1 or 10.2 it bootloops, i also installed UVMC6 radio for those roms. Issue is that i cant install other recovery when i try to install it says aborted, or using odin its just dont send error. any help fast?
Click to expand...
Click to collapse
U need to get on newest twrp, I been on 2.6 and currently run a 4.3 and have flashed everyone that's been built, no issues at all
Sent from my SAMSUNG-SGH-T989 using xda premium
I would try TWRP too. Just download the goo manager app, and flash TWRP. It should be easy.
Hi! I have encountered a problem, and really hope someone can help me!
Two days ago i flashed Omnirom Nightly on my n7105 to get Android 4.4. I was running cmw recovery but couldnt get the ota updates to work, so i was trying to flash open recovery instead. I used an apk that was supposed to install a script.
When i rebootet my phone, all i could get was the Note 2 boot image. It wont boot into recovery mode, or the rom. I am however able to boot into download mode.
Custom Binary download: Yes (4 counts).
Current binary: Custom
System Status: Custom.
How should i proceed? I've already tried to reflash cwm recovery, which did work, but didnt solve the problem. I am currently downloading stock firmware, but the file is 1.2 GB so it will take i while. Figured i should ask here in the meanwhile.
I'm not an expert at Android at all, im just a guy enjoying having custom roms and playing around a little. I do know that there are a lot of very talented people in this forum, and i really hope someone can help me find a solution. I've been googling for hours, but cant find anything that seems to work for me / or i dont fully understand and wont risk try before someone approves it.
Thank you, Vetle
EDIT: Is it correct that i cant flash any custom rom trough Odin? Or could i just flash omnirom again trough Odin?
If i manage to flash the stock rom and the bootloop goes away, will everything go back to normal, so i can flash cmw again and then a custom rom again?
No custom rom can be flashed through odin, as most of them are zip cwm/twrp base.
When u can only go to download mode, an official firmware only can help u through odin.
Sent from SM-N9005 with xda-app
Thanks for the answer!
Yup, i have flashed a stock rom now and i got the stock recovery. Everything was working fine.
Then i proceeded to do a factory reset in the stock recovery and flashed cwm trough Odin. When it was done, it wouldnt let me into recovery again! I can still boot up the phone tough.
I've also tried Open recovery. CWM via Rom manager. Open Recovery trough Goo Manager... Still cant get recovery to work, the stock rom works tough.
Any ideas?
Okay, i tried to flash the stock rom again and installed Rom Manger.
It still showes TWRP and CWM under installed recovery and i guess these its these two who makes the problem.
My plan now is to figure out how to completely remove them. I've never done anything related to adb before, so i hope it possible to remove them in another way?
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
vetle666 said:
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
Click to expand...
Click to collapse
I had recovery problems in the last few days also.
Installed DN3 rom using philz recovery, because its capable of prepare the phone to a new rom in a easy way.
It all went fine until first reboot.
I had a recovery boot loop. All I could see were some buttons and then reboot again.
Like you I had download access and flashed philz with Odin, but no luck.
Installed twrp via Odin and all was fine, and flashed philz new version.
Then I had to flash a new kernel (to be able to access wifi) and it all started again. Now I'm back on twrp.
Let's see what happens on my next flash.
My suggestion is to flash the recovery, and if that's OK flash the rom and use it
Next time you need recovery get Odin to help, but not all the way from an original rom. Just the custom recovery.
But if you want to get rid of your strange recovery configuration, and you are not already on new 4.3 recovery(which in your case could explain some of the problems you had) , with knox, install an older original rom, 4.1, and make all the steps, root it, install a custom recovery, and from there the room you want.
Reading your path sorting this problem, that was what would do next
Best regards
Please help because I messed up my tab3 8.
I was using the BinDroid ROM and today I decided to flash this ROM [JB/KK][4.3.1/4.4.2] CyanogenMod unofficial builds.
I started flashing the Philz recovery via Odin. After that I have bootloop.
I tried to flash stock firmware via Odin and still have bootloop.
Is there any way to fix this?
I am able to enter recovery or download mode.
spirosoupia said:
Please help because I messed up my tab3 8.
I was using the BinDroid ROM and today I decided to flash this ROM [JB/KK][4.3.1/4.4.2] CyanogenMod unofficial builds.
I started flashing the Philz recovery via Odin. After that I have bootloop.
I tried to flash stock firmware via Odin and still have bootloop.
Is there any way to fix this?
I am able to enter recovery or download mode.
Click to expand...
Click to collapse
1.Do you boot into the Philz recovery or the one you had previous to Odin the recovery? If its philz try wiping data and cache and rebooting.
2.Next check if the md5 of your download matches and you have downloaded the correct zip for your device (lt01wifi). If so factory data reset and then flash again.
3.Make sure you are using ODIN correctly. A good guide can be found here http://forums.androidcentral.com/ambassador-guides-tips-how-tos/300296-guide-samsung-how-flash-stock-rom-via-odin.html
I flashed the stock firmware again and still bootloop.
Then I did a factory reset via the recovery and that was it!!!! My tablet is fixed!!!
I pass the Philz recovery then and root the tablet.
So now I am with the stock ROM and rooted. Thank you!!!
Is your data lost after flashed ?
Image, mp3, video etc..