I have 5.0.2.7 cwm, and if i install cm 10.1 or 10.2 it bootloops, i also installed UVMC6 radio for those roms. Issue is that i cant install other recovery when i try to install it says aborted, or using odin its just dont send error. any help fast?
you CWM is outdated bro and stick to 4.2.2 ROMs the newest 4.3 has issues for the moment, GRAB TWRP from here http://teamw.in/project/twrp2/101 load it up through odin and flash that........ your CWM does not flash these newer ROMs, if you want to stay on CWM then you have to upgrade it to a newer recovery ??? what else are you stuck on bro
Fulfen said:
I have 5.0.2.7 cwm, and if i install cm 10.1 or 10.2 it bootloops, i also installed UVMC6 radio for those roms. Issue is that i cant install other recovery when i try to install it says aborted, or using odin its just dont send error. any help fast?
Click to expand...
Click to collapse
U need to get on newest twrp, I been on 2.6 and currently run a 4.3 and have flashed everyone that's been built, no issues at all
Sent from my SAMSUNG-SGH-T989 using xda premium
I would try TWRP too. Just download the goo manager app, and flash TWRP. It should be easy.
Related
NEED some help. I had TWRP loaded on my Htc Wildfire S. I tried to Flash CM 7.2 but it said FAILED. So I installed CWM through ROM manager. The problem is now I cant get into recovery. When I try to boot in recovery the phone starts up normally. I tried it a lot of times. Still no success. PLEASE help me.!!!
Install TWRP 2.2.0.0(not 2.3).....it works fine for CM7.2
The new recovery doesn't recognize old updater scripts....which is why dont used the new version
You can find it here
csoulr666 said:
Install TWRP 2.2.0.0(not 2.3).....it works fine for CM7.2
The new recovery doesn't recognize old updater scripts....which is why dont used the new version
You can find it here
Click to expand...
Click to collapse
I want to use CWM. I found a lot of guides describing how to install custom rom through CWM. How can I remove the TWRP and have only CWM (I think I have both in my system)
ij345 said:
I want to use CWM. I found a lot of guides describing how to install custom rom through CWM. How can I remove the TWRP and have only CWM (I think I have both in my system)
Click to expand...
Click to collapse
If you flash a recovery.... It overwrites the previous one.... Just flash CWM via rom manager
csoulr666 said:
If you flash a recovery.... It overwrites the previous one.... Just flash CWM via rom manager
Click to expand...
Click to collapse
Yeah. I did that. I must have only CWM in my cell. I had flashed it through ROM manager.
Using CWM to flash the ROM, I updated CM10.0 to CM10.1.2. After that I could no longer get into recovery mode. It's as if CWM is just not there.
What can I do about this?
Thanks for any help.
twitchchris said:
Using CWM to flash the ROM, I updated CM10.0 to CM10.1.2. After that I could no longer get into recovery mode. It's as if CWM is just not there.
What can I do about this?
Thanks for any help.
Click to expand...
Click to collapse
Reboot to Recovery flash a new CWM, if you cannot go to recovery, go to download mode, flash a new CWM via odin
Hey EveryOne...
I've SG Note2 n7100 was on stock and updated to 4.3, I just wanted to install any custom ROM so I tried to flash recovery from this tutorial http://forum.xda-developers.com/showthread.php?t=2531965, It says, just install recovery and flash whatever rom you want, so I successfully flash Phillz recovery, and backup of my stock ROM, after backup I just wipe all data to install a new rom after that I tried to flash a ROM probam_kk_1.2.5_d800 during flashing status 7 error occur, so i just go back to wipe all data, and restore my rom, but after restoring I am on bootscreen and nothing.
What should I do?
I am downloading latest firmware from Sammobile and there is a tutorial says it can be flash via Odin, so could this will help me?
Or I just download any other Rom and give it a try?
PS.. the device was not rooted, was on Pure Stock..
Sorry for my English..
and Thanks for your cooperation.. :fingers-crossed:
Status 7 is usually when you are using an older version of recovery. Which version of phils are you on? You probably just need to update that while you are flashing a recent rom
Sent from my GT-N7105 using XDA Premium 4 mobile app
sawdoctor said:
Status 7 is usually when you are using an older version of recovery. Which version of phils are you on? You probably just need to update that while you are flashing a recent rom
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am using philz_touch_5.15.0-n7100.tar recovery.
_hito_ said:
I am using philz_touch_5.15.0-n7100.tar recovery.
Click to expand...
Click to collapse
If your flashing omni rom I think you need the latest version of phils or the latest version of twrp. I had the same issue on my galaxy tab 2 with omni. Updated to latest twrp and it flashed no problem.
Sent from my GT-N7105 using XDA Premium 4 mobile app
sawdoctor said:
If your flashing omni rom I think you need the latest version of phils or the latest version of twrp. I had the same issue on my galaxy tab 2 with omni. Updated to latest twrp and it flashed no problem.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for your cooperation kind Sir..
I heard that latest version of philz will get you into the bootloop, and majority on this forum said that philz 5.00.5 is the best recovery that don't take you to the bootloop, and also I've backup my stock rom in philz recovery if I flashed newer recovery will I be able to restore my stock rom?
Or can I leave all this and just go for the flash stock Rom via odin? Will this help?
_hito_ said:
Thanks for your cooperation kind Sir..
I heard that latest version of philz will get you into the bootloop, and majority on this forum said that philz 5.00.5 is the best recovery that don't take you to the bootloop, and also I've backup my stock rom in philz recovery if I flashed newer recovery will I be able to restore my stock rom?
Or can I leave all this and just go for the flash stock Rom via odin? Will this help?
Click to expand...
Click to collapse
I think the later versions of phils recovery can have issues with aroma which Omni doesn't use. If it were me I'd flash the latest twrp and install Omni with that as the Omni team use twrp for there ota's. You can flash twrp through phils recovey and vice versa. If you want to restore your back up just flash back to phils first or do a new back up with twrp
sawdoctor said:
I think the later versions of phils recovery can have issues with aroma which Omni doesn't use. If it were me I'd flash the latest twrp and install Omni with that as the Omni team use twrp for there ota's. You can flash twrp through phils recovey and vice versa. If you want to restore your back up just flash back to phils first or do a new back up with twrp
Click to expand...
Click to collapse
Thank you Sir!
I'm out of bootloop now and trying different Roms.
Thank you again for your time. :highfive:
I am having a problem installing clockwork recovery from odin
i have already rooted my galaxy grand.
i installed a rom based on cm 10.1 and have been using it since a long time
now i wish to install new kitkat roms but it requires a new version of recovery.
so when i tried to install phill "philz_touch_6.12.8-i9082" from odin in download mode the installation dosen't begins at all
after that i tried many times installing other recoveries from the existing threads...but i failed
later my old clockwork recovery also stopped working and now i cant boot into it at all
please he me...
maxx007 said:
I am having a problem installing clockwork recovery from odin
i have already rooted my galaxy grand.
i installed a rom based on cm 10.1 and have been using it since a long time
now i wish to install new kitkat roms but it requires a new version of recovery.
so when i tried to install phill "philz_touch_6.12.8-i9082" from odin in download mode the installation dosen't begins at all
after that i tried many times installing other recoveries from the existing threads...but i failed
later my old clockwork recovery also stopped working and now i cant boot into it at all
please he me...
Click to expand...
Click to collapse
Make sure you followed the right steps.
maxx007 said:
I am having a problem installing clockwork recovery from odin
i have already rooted my galaxy grand.
i installed a rom based on cm 10.1 and have been using it since a long time
now i wish to install new kitkat roms but it requires a new version of recovery.
so when i tried to install phill "philz_touch_6.12.8-i9082" from odin in download mode the installation dosen't begins at all
after that i tried many times installing other recoveries from the existing threads...but i failed
later my old clockwork recovery also stopped working and now i cant boot into it at all
please he me...
Click to expand...
Click to collapse
Just note, to install 4.4.2 roms you need on 4.2 STOCK, then flash newer recovery->flash it. Now just go to download mode and flash 4.2 STOCK via odin, flash CWM and 4.4.2 roms
Press thanks if my post helpful
Sent from my GT-I9082 using Tapatalk
Try to install the CWM mentioned in pawitp's CM11 thread. It should work for all Kitkat ROMs.
Another possible problem is incorrect driver installation or damaged USB cable, that maybe what's preventing your device to download from Odin.
I want to flash the CM 12.1 to my T-Mobile Galaxy S III but I don't know where to download the gapps for the latest nightly here
i also dont know if T-Mobile is arm, arm64, or x86
so I cant download in this site from cynogenmod
another question- is it the Cyanogen Recovery from this link will be use to flash the ROM or it is the recovery that will be use after flashing the CM12.1?
Use the ARM gapps.
I recommend using either Philz Touch recovery or TWRP, both of which can be flashed using Odin.
I have never used Cyanogen's recovery but have had great success with Philz and TWRP.
audit13 said:
Use the ARM gapps.
I recommend using either Philz Touch recovery or TWRP, both of which can be flashed using Odin.
I have never used Cyanogen's recovery but have had great success with Philz and TWRP.
Click to expand...
Click to collapse
thanks on your reply but I already solve it using the recovery from ROM manager app that I downloaded in the Play store but there is still a problem on it when I update using CyanogenMod updates it will fail to flash automatically after clicking install, so I still need to flash it manually, that's why I still need to flash the recovery provided with CyanogenMod
I have never used the recovery from cyanogen so I don't know if it will automatically dirty flash the update. I also don't know if the cyanogen recovery can flash other zips such as supersu, different gapp versions, etc.
Automatic flashing is not something I like to do because a nightly can cause problems. By using twrp, I can easily make a nandroid backup before flashing a new nightly.
Just tried the Cyanogen recovery and, after downloading a nightly update, I click install and it reboots to recovery and dirty flashes the updated ROM; however, the Cyanogen recovery would not flash the LP Gapps while Philz and TWRP were able to flash the Gapps. Also, the Cyanogen recovery does not have an option to create a nandroid backup.