Related
I was updating my Dash the other day to Ookba's latest rom when I received an error message. It gave me instructions on how to fix it (loading it in bootloader etc.), and I received a message saying it was successful and the rom would continue updating. I received another error message saying the rom was corrupt, and the program shutdown. My phone will not power up now. It was at(or near) full charge while reflashing, but will not turn on regardless of the button combination I hold while attempting to power it on.
Any ideas? Thanks!
what rom did you attempt to load in the bootloader? it should have been the factory rom..if not, then that is probably the root of the problem....as far as it not powering on now...I leave that open to the forum...cuz' I have no relevant advice on that one....
when trying to do the gold card method to unbrick my phone, it say Invalid certificate ..? wats this and how to fix it.
I was trying the "[ROM][EXCA][WWE][* 3VOLUTION SERIES *][WM6.5 STD 21854][Build 3VO.3.00.112509]" when it locked up on me, and still hasn't been able to power up.
Today when plugging it in after a week of letting sit, a red led light showed where the normal orange/green led would normally light up when charging/charged. The light stayed on for a few seconds, then shut off. Nothing else though. Any other suggestions?
allthrottle said:
I was trying the "[ROM][EXCA][WWE][* 3VOLUTION SERIES *][WM6.5 STD 21854][Build 3VO.3.00.112509]" when it locked up on me, and still hasn't been able to power up.
Today when plugging it in after a week of letting sit, a red led light showed where the normal orange/green led would normally light up when charging/charged. The light stayed on for a few seconds, then shut off. Nothing else though. Any other suggestions?
Click to expand...
Click to collapse
Red light my friend means your battery is gone, probably your phone is not bricked maybe it just needs a battery replacement
I am having the same issue, except that I can place the battery in another Dash and it boots up just fine, so I am assuming it is not the battery. I will buy another one to double check. My problem is the same as which is stated above. Can anyone help? Thank you.
Just an update to see if I can get anymore suggestions. Hadn't touched the phone since the last post. Bought a new battery for it this weekend and it's still dead as ever. Won't boot at all. Not into bootloader, nothing. I get absolutely no response holding power+cam or softkeys+power.
Any advice? I don't absolutely need the phone as I've picked up a G1, but it would be nice to have this working, or at least trash it if it's junk.
Thanks!
Everyone else stumped too?
Have you connected to the wall charger to see if you get some response with your new battery?.
Just unbricked mine after being dropped again by the girlfriend. Try this, plus usb cable into device, press the camera button only. See if that gets you into the bootloader screen. If so, flash the oem build and go from there.
Tried it plugged into a wall charger for 3-4 hours, car charger for another hour, and computer/usb for another hour. No response anytime.
I'll try the camera only method when I get home later.
Thanks!
Just tried plugging it into the computer and holding only the camera. Didn't work. Tried that, tried holding power+cam, power+soft keys etc.. What's weird is I had the battery cover off while doing this, and the battery slipped out while I was holding cam+pwr, it actually loaded into the multicolor(bootloader?) screen twice, but would shutoff within a few seconds. Now I'm back to no response from it.
Finally got it to stay on the boot screen without turning off, but can't get it to establish an activesync with the computer so I can't flash it. The computer is obviously detecting it though, because I see an icon that says "remove smartphone usb sync".
The phone's FINALLY working again! Thanks again guys! I was a couple of days away from junking the thing! I couldn't get Ookba's rom to flash it, so I went back to the unbricking tutorial and saw that he recommended grabbing the factory rom to flash it. I did, it worked, and I just flashed it again using Ookba's rom.
Took quite a few months, but it's back! Thanks!
So i've looked around and no one that i've seen has the same exact problem as i do. Here's my post in another forums about my problem.
Here's my story about my Galaxy s2 for T-mobile. My phone randomly turned off 2 days and whenever i tried to turn it on, it would restart and basically never get pass the blue loading bar screen. Second, i found out about this boot loop sequence and i was able to do a factory wipe.
After i factory wiped the data etc off the phone, i was able to use it until it ran out of battery, but then after i found out it ran out of battery, it wouldn't let me turn it back on, it wouldn't get pass the loading screen, once again. On the other hand, i am able to go to recovery mode or download mode, but the phone shuts off before i can even try and click on the options i want.
Today, i found out that if i kept pressing power button consecutively on the phone, I'd be able to go to my home screen and basically act as if nothing ever happened, it'd function as a new phone! I then had the nerves of turning off my phone just to make sure it finally works now, but my hopes were crushed and now the pressing the power trick does not even work anymore. It would probably work one out of 10-15 times, and in the end it'd still restart. I am using a gingerbread galaxy s2. My friend tried using the usb jib on my phone, and it worked but whenever he tried to plug in the usb, the phone would just restart. I am extremely frustrated with this, and if you can help, please do so because it's important that i fix this phone. If you have any questions, please feel free to ask!
Hi there, thank you for the welcoming me to the forums. No, my phone is not rooted, it has always been gingerbread etc i never tried rooting because i never knew how:/ I believe this started when i was just browsing around facebook, so i'm not entirely sure what happened... Uhmm i tried going to download mode through the volume keys and power button when it's connected to usb to the i think it's odin3? and it'd be in the download mode but as soon as the computer says it's connected, the phone would just turn off again and bam, it's like nothing ever happened. My phone does charge when it's plugged in, but it doesn't show it's being charged but i remember my battery was dead last night and i charged it till today and now it's got power. ANd no i don't have a warranty:/ i really hope you can help me
Sounds like a faulty power button. Check out Mobiletech video for thier power button repair service.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-t-mobile-power-button-repair/
Sent from my SGH-T989 using xda premium
Hello I have a problem with my galaxy nexus. my dad's using it and yesterday while he was browsing the phone shut down e turned on only if plugged in. So today i'm trying to figure out what's the problem.
If unplugged it doesn't turn on in any way, it's like dead. When I plug it in i can only turn it on in fastboot mode but i can't enter recovery or boot the phone, if i try one of those it goes to the google logo and then turns off or return to fastboot and if i unplug the phone while it's in fastboot it turn off immediatly. I also tried to turn it on without battery and sim but nothing.
Oh and there is one thing my dad noticed yesterday. I gave my phone to my dad to subtitute his huawei y530 and copied on my GN photos, music and contacts. Yesterday when the phone turned off he said that for like half second he saw on the screen the huawei logo, and i can't understand why.
I also tried the procedure described there http://forum.xda-developers.com/galaxy-nexus/general/bricked-gnex-brought-to-life-t1760787 but nothing.
hope someone can help me, and sorry if english is not perfect.
It might sound a bit like a battery problem here. Try to take out the battery and plug in the phone the try to start it. If it does not work, via adb try to flash a Google Factory image for GNex. This is all I csn think of right now
Sent from my Galaxy Nexus
AdmiralulNipples said:
It might sound a bit like a battery problem here. Try to take out the battery and plug in the phone the try to start it. If it does not work, via adb try to flash a Google Factory image for GNex. This is all I csn think of right now
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I can only access fastboot mode (where you have to select to start the phone normally, in recovery or reboot bootloader) and if i remove the battery the phone shuts down, no matter if it is connected to AC or USB.
If i plug the phone in to my pc usb (with phone turned off) i can hear the sound of the usb connection and after a few seconds it disconnects and keeps doing that over and over.
Well this is my situation:
I bought a broken screen and broken digitalizer HTC Desire EYE with AT&T stock rom 4.4.4 lolipop
While waiting for the screen + digitalizer replacement, i decided to try ADB commands to remotelly access the cell from the PC.
When first time i turned ON the cell, it worked ok, all sounds of android OS could be heard and worked ok, and even HTC Sync showd up and i could even access the internal and external memory of the phone.
Then i tried to boot into fastboot with low battery levels, i rebooted in fastboot and my PC detected the drivers for such...
then since i was on blind cause the screen was broken, i clicked on I was supposing was recover (i needed to enter on recovery so i could run an ADB commands to activate USB debugging from recovery, so i also later have access to remote screen of the phone from the PC)
So, i clicked on blind thinking i was on recovery and after that the phone didnt charge any longer the battery or turned ON.... i connected the phone to the wall charger and not even the RED LED light of the battery turns ON anymore.
I tried all the options: 1) volume +, power
2) volume +, volume -, power
3) volume -, power (for over 20 secs) and nothing, im like lost here?
I also tried plugging the USB to the PC and that doesnt even work, nor the PC do any sound when a new device is connected, so its like the phone is completely dead.... any help is more than welcome
come on, no one? damn, im blind while waiting for the freaking chinnese screen replacemente... since i cant do crap... i started a wall charger for 4 days, lets see if this turns on at least the red light, which by the moment it doesnt... will keep updating this thread regarding the status and situation in the couple of days.
i'm having the same problem right now with my HTC desire and i just bought it in July brand new from AT&T. I was wondering if it ever turned back on for you?
csa1234 said:
Well this is my situation:
I bought a broken screen and broken digitalizer HTC Desire EYE with AT&T stock rom 4.4.4 lolipop
While waiting for the screen + digitalizer replacement, i decided to try ADB commands to remotelly access the cell from the PC.
When first time i turned ON the cell, it worked ok, all sounds of android OS could be heard and worked ok, and even HTC Sync showd up and i could even access the internal and external memory of the phone.
Then i tried to boot into fastboot with low battery levels, i rebooted in fastboot and my PC detected the drivers for such...
then since i was on blind cause the screen was broken, i clicked on I was supposing was recover (i needed to enter on recovery so i could run an ADB commands to activate USB debugging from recovery, so i also later have access to remote screen of the phone from the PC)
So, i clicked on blind thinking i was on recovery and after that the phone didnt charge any longer the battery or turned ON.... i connected the phone to the wall charger and not even the RED LED light of the battery turns ON anymore.
I tried all the options: 1) volume +, power
2) volume +, volume -, power
3) volume -, power (for over 20 secs) and nothing, im like lost here?
I also tried plugging the USB to the PC and that doesnt even work, nor the PC do any sound when a new device is connected, so its like the phone is completely dead.... any help is more than welcome
Click to expand...
Click to collapse
Was kind of in the same boat as you. Bought my EYE with a broken digitizer.. upon receiving it I found out that the phone wouldn't charge or turn on.. I had to replace the battery myself and now it works like a charm.!
Sent from my HTC Desire EYE using Tapatalk
battery replacement
Would you be able to fix mine because I've have tried everything and it still won't turn on please help
techsavi said:
Would you be able to fix mine because I've have tried everything and it still won't turn on please help
Click to expand...
Click to collapse
Check for dust or other dirt in your charging port, then use a toothpick to get it out, this fixed it for me.
Bumping because I have a similar issue and don't want to make a new thread.
My screen is fine, but the LED is off, plugging it in does nothing, and it wont turn on. Worked fine last night, it was in low power mode (on CM 14), I shut it off and plugged it in. Now, the next day, it's dead.
Cross-posting this from r/NextbitRobin
So Tuesday night before bed I went to check my phone (which had been on the charger for the last couple hours and so was at >95%) and noticed the volume button was not responding. I figured something buggy was going on, sometimes I need to reboot my phone every couple of days to get it to work properly (especially if it had run down into low power mode before recharging), so after unplugging it from the charger, I held down the power button, selected reboot, and clicked okay. The phone then proceeded to shut down, but not start back up.
When I tried to start it up again by holding the power button, I got no response initially. Then I was able to get it to buzz/vibrate, but the screen never came on.
I tried holding down the Vol- button and the power button together for 20 seconds to force a reset, and it vibrates a couple of times, but nothing happens.
If I plug it into a charger, I don't see any LEDs illuminate, and it just vibrates approximately every 3 seconds (not continuously, it seems to have some semi-random pattern). If I unplug it, the vibrating stops, but I still can't get it to turn on. It does not seem to make a difference if I am using a wall charger or trying to charge it off my laptop.
I have not rooted the phone or installed any custom ROMS, and have had it since I bought it on Amazon in June of 2017.
Any ideas what might be the issue? Any tips for reviving my phone?
This doesn't seem to match anything I have been able to find with some basic google searching.
Edited to add that I also tried removing the sim card and starting it up without one, but that did not appear to make a difference.
Update: I left it plugged into a wall charger for about 18 hrs and when I came back there was no change in behavior.
This many sound repetitive but lets first get the obvious out of the way so that we are sure you tried the most basic things for sure.
Is there an issue with the cable not able to charge the device? Can you try changing the cable?
Power + volume down for 30 secs / 1 minute / few minutes. This usually helps, sometimes more than 30 seconds for some reason. Try doing it while plugged in.
When you connect to the laptop what happens? Does it power on for a minute or vibrate?
Do you have adb installed on your computer? does you device get detected on your laptop?
/root said:
This many sound repetitive but lets first get the obvious out of the way so that we are sure you tried the most basic things for sure.
Is there an issue with the cable not able to charge the device? Can you try changing the cable?
Power + volume down for 30 secs / 1 minute / few minutes. This usually helps, sometimes more than 30 seconds for some reason. Try doing it while plugged in.
When you connect to the laptop what happens? Does it power on for a minute or vibrate?
Do you have adb installed on your computer? does you device get detected on your laptop?
Click to expand...
Click to collapse
Tried charging it with both the OEM cable as well as an amazon basics USB-c cable (both of which had been used to charge the phone successfully in the 24 hrs before it went wonky), no noticeable difference in behavior.
Held the power + volume down buttons for 180 seconds, did not boot. Repeated this with it plugged in (wall charger) and it still did not boot.
When I connect it to my laptop, I get the same behavior of vibrating as when plugged into a wall charger, but it does not boot or power on, nor does the laptop detect the phone in any fashion. I do not have adb installed on my laptop.
Anything else I can try, or is the phone a write-off at this point?
First step to solving any device issue is to somehow boot it and get in any mode possible. Since you can't do that I can't think of any other way to get it working.
I'm having the same issue, phone is not giving me any signs of life...frustrated at the moment
It's a total long shot, but try carefully cleaning out your charge port with a needle or a small pin and a little bit of alcohol. I pulled quite a bit of pocket lint out of mine and it works fine now. It didn't look like it was that dirty, but I pulled out a large ball bearing sized amount.
Other than that the only other thing I can think of is that your battery might be shot. It might have been taking enough of a charge to try and turn on, but not enough to do so.