Ok, so I just rooted my phone with mt3rooter, and flash clockworkmod then cm7. Cm7 works great,so when i rebooted back into recovery,i had to reinstall cwm with the update.zip, the stcok recovery was still there!!! Iam a huge mod, and it would be a pain to have to install cwm everytime i need to flash something,please help!!!!:crying:
Related
Why can't I get this to work? Driving me nuts!
I have loaded the engineering rom, rooted it, go to rom manager, reboot into recovery, and I get the red triangle screen.
Try to apply update.zip
It says:
E:signature verification failed
Installation aborted.
What am I doing wrong?
grrr
Custom Recovery
Do you have a custom recovery set up??? AmonRa or Clockwork?
Sounds like you still have the stock recovery to me.
That's the problem.
Im trying to run the update.zip in stock recovery to flash the clockwork mod.
In RomManager, it says clockwork mod is flashed, but when I hit reboot into recovery, it takes me to stock recovery.
wifiguru said:
That's the problem.
Im trying to run the update.zip in stock recovery to flash the clockwork mod.
In RomManager, it says clockwork mod is flashed, but when I hit reboot into recovery, it takes me to stock recovery.
Click to expand...
Click to collapse
try going to where it says flash alternate recovery, which is amon_ra, and then flash that, then try to see if you can boot into recovery.
Have you tried to flash clockwork from ADB?
EDIT - Or from terminal emulator?
No go. Same story.
Being a pain the @$$
bender1077 said:
Have you tried to flash clockwork from ADB?
Click to expand...
Click to collapse
No, but that is my last resort.
Hello! While flashing RA recovery on my rooted stock 2.1 Desire, something went wrong (got stuck on Waiting for root... message). Phone powered off, didn't power on again, so took battery out. Phone booted as it usually does, but when I boot to recovery, I just get HTC screen, and nothing more. Looks like I've erased recovery.
YES, I've tried reflash with RA mod.
YES, I've tried to reflash with Clockwork mod.
YES, I've used unrEVOted last version (as of 18/11) to flash my phone.
How do I return standard recovery or flash RA? I need to install new ROM, and I can't do it without recovery.
Try this thread http://forum.xda-developers.com/showthread.php?t=673277
its the original way to flash a ROM before clockwork mod and that where created.
i was on the gingerbread leak, but got tired of it cuz its not completely stable, and i had clockwork mod 3.1.0.1 and it worked fine. i flashed back to ec05, froyo, and flashed clockwork mod 3.1.0.1 and it keeps freezing. i have ran error checking on my computer and re formated it in android and no luck. keeps freezing in the same spot! do i need to try a different clockwork version?
I have never had that issue, but how long are you giving it to run the backup? Also, why did you need to re flash cwm? Are you using rom manager or 3 finger boot to get into recovery? Here is a link to the acs recovery which is a modified version of cwm 4. If you install it you will have acs recovery on 3 finger boot and whatever recovery that is included with your kernel (probably cwm 3.1.0.1) via rom manager still.
http://forum.xda-developers.com/showthread.php?t=1272906
jeffro18 said:
I have never had that issue, but how long are you giving it to run the backup? Also, why did you need to re flash cwm? Are you using rom manager or 3 finger boot to get into recovery? Here is a link to the acs recovery which is a modified version of cwm 4. If you install it you will have acs recovery on 3 finger boot and whatever recovery that is included with your kernel (probably cwm 3.1.0.1) via rom manager still.
http://forum.xda-developers.com/showthread.php?t=1272906
Click to expand...
Click to collapse
it would run perfectly smooth on gingerbread. and it gets stuck on backing up system on file #11596 or something like that, and clockwork doesnt have an offical recovery for my phone so i have to use odin to flash a recovery. so i use the 3 finger boot. ill try the acs recovery and see what happens. if not ill have to go back to 3.0.0.5, which is the one that came with the rom.
so i just downloaded the rom in the link (http://forum.xda-developers.com/showthread.php?t=2051374) and when i extracted the file with CWM and i rebooted my phone it wasnt reboooting so i thought i bricked my phone so i took the battery out and put it on recovery and it turns out i LOST CWM!! so i just rebooted my phone and left it. when i came back it actually booted up and is working fine BUT now i dont have a recovery!?!?!
I stll have the zip file on my sdcard i just wanna know how to get CWM on my phone again. im properly rooted and everything. i have cwm zip, file i just dont know how to install it or whatever the process is..PLZ HELP!!!![/B]
jawad608 said:
so i just downloaded the rom in the link (http://forum.xda-developers.com/showthread.php?t=2051374) and when i extracted the file with CWM and i rebooted my phone it wasnt reboooting so i thought i bricked my phone so i took the battery out and put it on recovery and it turns out i LOST CWM!! so i just rebooted my phone and left it. when i came back it actually booted up and is working fine BUT now i dont have a recovery!?!?!
I stll have the zip file on my sdcard i just wanna know how to get CWM on my phone again. im properly rooted and everything. i have cwm zip, file i just dont know how to install it or whatever the process is..PLZ HELP!!!![/B]
Click to expand...
Click to collapse
That Rom is based off Kobridges FL16 deodexed JB Rom. Since we do not have source, the stock kernel only has stock recovery. In other words, you will not have cwm after flashing because of the stock kernel. What everyone is doing if they want to load zips is use mobile Odin to flash EL29 direct boot cwm or el26 cwm. Then flash whatever zip you need then flash stock TW JB kernel and reboot. Once you flash the stock kernel, it removes cwm.
Steps how I do it
DL EL29 direct boot cwm, save on sd
DL any zips you want to install
DL mobile Odin
Use mobile Odin flash EL29 direct boot cwm
When phone reboots to cwm, flash zips
Flash stock FL16 KERNEL
Reboot
Hi! I have encountered a problem, and really hope someone can help me!
Two days ago i flashed Omnirom Nightly on my n7105 to get Android 4.4. I was running cmw recovery but couldnt get the ota updates to work, so i was trying to flash open recovery instead. I used an apk that was supposed to install a script.
When i rebootet my phone, all i could get was the Note 2 boot image. It wont boot into recovery mode, or the rom. I am however able to boot into download mode.
Custom Binary download: Yes (4 counts).
Current binary: Custom
System Status: Custom.
How should i proceed? I've already tried to reflash cwm recovery, which did work, but didnt solve the problem. I am currently downloading stock firmware, but the file is 1.2 GB so it will take i while. Figured i should ask here in the meanwhile.
I'm not an expert at Android at all, im just a guy enjoying having custom roms and playing around a little. I do know that there are a lot of very talented people in this forum, and i really hope someone can help me find a solution. I've been googling for hours, but cant find anything that seems to work for me / or i dont fully understand and wont risk try before someone approves it.
Thank you, Vetle
EDIT: Is it correct that i cant flash any custom rom trough Odin? Or could i just flash omnirom again trough Odin?
If i manage to flash the stock rom and the bootloop goes away, will everything go back to normal, so i can flash cmw again and then a custom rom again?
No custom rom can be flashed through odin, as most of them are zip cwm/twrp base.
When u can only go to download mode, an official firmware only can help u through odin.
Sent from SM-N9005 with xda-app
Thanks for the answer!
Yup, i have flashed a stock rom now and i got the stock recovery. Everything was working fine.
Then i proceeded to do a factory reset in the stock recovery and flashed cwm trough Odin. When it was done, it wouldnt let me into recovery again! I can still boot up the phone tough.
I've also tried Open recovery. CWM via Rom manager. Open Recovery trough Goo Manager... Still cant get recovery to work, the stock rom works tough.
Any ideas?
Okay, i tried to flash the stock rom again and installed Rom Manger.
It still showes TWRP and CWM under installed recovery and i guess these its these two who makes the problem.
My plan now is to figure out how to completely remove them. I've never done anything related to adb before, so i hope it possible to remove them in another way?
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
vetle666 said:
This is so weird. Somehow i managed to install CWM Touch via Rom Manager and it booted. When i choose reboot /pull battery it will only boot straight into CWM again. I tried to flash TWRP via Odin, wich sucseeds, but then it reboots into CWM again!
I am soo lost its almost funny!
EDIT: Since i could get into cwm now, i tried to flash omnirom, but it aborts and all i get is status 7...?
EDIT2: Latest now is that i suddenly managed to install TWRP via Odin, but i still cant install the latest omnirom, all it says is "updating partition details".
Click to expand...
Click to collapse
I had recovery problems in the last few days also.
Installed DN3 rom using philz recovery, because its capable of prepare the phone to a new rom in a easy way.
It all went fine until first reboot.
I had a recovery boot loop. All I could see were some buttons and then reboot again.
Like you I had download access and flashed philz with Odin, but no luck.
Installed twrp via Odin and all was fine, and flashed philz new version.
Then I had to flash a new kernel (to be able to access wifi) and it all started again. Now I'm back on twrp.
Let's see what happens on my next flash.
My suggestion is to flash the recovery, and if that's OK flash the rom and use it
Next time you need recovery get Odin to help, but not all the way from an original rom. Just the custom recovery.
But if you want to get rid of your strange recovery configuration, and you are not already on new 4.3 recovery(which in your case could explain some of the problems you had) , with knox, install an older original rom, 4.1, and make all the steps, root it, install a custom recovery, and from there the room you want.
Reading your path sorting this problem, that was what would do next
Best regards