Dear Sirs;
Maybe this part of forum not be the proper place for my question but I don't know the poeple more expert than XDA masters.
Since last monday, computer cant recognize my Diamond when I connect it by USB cable and "USB device not recognized" appears. I will be really appreciated if you kindly help me.
Best Regards
Dariush Chegini
Try reinstalling Active Sync/Windows Mobile Device Center.
First remove Active Sync/ WMDC, restart PC and than install Active Sync/ WMDC.
Thanks for your kind attention. I reinstalled Activesync...no change, computer can't recognize the Diamond. My Diamond charges with both charger and computer, USB headphone works but PC can't recognize it....
I'm so confused and will be really appreciated if XDA masters help me.
Best Regards
XP or Vista or Windows 7 or which OS?
I've tried by both WIN XP and Vista.
could be a few possibilities for XP atleast...
activesync - file->connection settings->allow usb connections checked
faulty cable, try another one
faulty port on computer, try another one
driver issue - a difficult one...
i had this on my xp, found out there's something wrong with the cable - phone charging fine via computer USB, but XP says it doesn't recognize the device so doesn't connect to activesync....
good luck
Try on your Diamond -
Start>Settings>USB to PC
Unchek "Enable faster data synchronization"
If none of the above solutions work, maybe a hard reset...
I tried another cables, all options in "USB to PC", Activesync options, hardreset, even install other ROM but PC still can't recognize the Diamond.
It seems to be a Hardware problem but Diamond can be charged by USB and USB headphone works properly... I'm so confused .
Thanks Millions
Dariush
dchegini said:
I tried another cables, all options in "USB to PC", Activesync options, hardreset, even install other ROM but PC still can't recognize the Diamond.
It seems to be a Hardware problem but Diamond can be charged by USB and USB headphone works properly... I'm so confused .
Thanks Millions
Dariush
Click to expand...
Click to collapse
Try this in order...
1. Connect diamond to pc - it should at least charge as your say, but not detect Activsync
2. Goto Settings > Connections > USB to PC
3. Check Allow USB Connections > Uncheck allow fast data sync...
Does it connect?
if not and if you are using Vista
1. goto Windows Mobile device Center
2. check the attached image to see you have the same settings...
Does it connect?
if still not, then it could be driver issues, which I can suggest, once you reply to the above...
Thanx for your attentions. I've tried uncheking the said bottom but no change.
I used to connect the Diamond to the same notebook without any problem for more than 16 months, but the damn notebook stop recognizing my Diamond these days .
Thanks Millions
Dariush
may be usb port on your computer is malfunction. Did u try different usb port?
You need to open device manager in control panel to see how you diamond is listed.
Ever since i started with a new company 3 years ago they have some software that prevents activesync from connecting to any device I have from their computers using USB.
I went Bluetooth method and all is fine. I just use the USB for large, direct file transfer to internal storage.
If you get issues with activesync and usb and can take ages to resolve (if possible).
I guy's.
After a lot of search in this forum and a lot of other forum's, i came to this threat.
I had the same problem, my diamond didn't connect to my pc.
I had tried all the different suggestion, and nothing seemed to work. until i read the post of cloudedhopes, that suggested to change the usb cable. Because it was the only thing that i hadn't tried, i did change the cable, and it worked!
So i'm posting only to thank you guy's for all of the help, given not directly to me, but to all user!
Hi guys
so whene i connect my phone to my pc nothing happen !
can any one tell me where is the probleme ?
Do you have fast charge enabled?
Does your device show as charging when plugged in?
well i was running into the same problem, dial *#*#DIAG#*#* just check the USB part is set up as PDA, your PC should recognize it then.
Hi everyone,
I'm not sure if it's just me being a noob or if there is something borked on my P6 but I cannot for the life of me get any of my computers to recognise my P6 when I connect it via USB. I have installed the Mobile Drivers and have also tried putting it into USB Debugging mode but the computer doesn't see the phone. It does, however, charge it via USB but I get nothing else saying I'm connected and HiSuite also reports me as not being connected. Any ideas?
Ok, this is solved. Apparently, the phone's USB cable and another that I tried did not work with the phone but I swapped out to a third cable and it works fine.
hello, after update to 4.4.4 i can't connect to pc, can someone help me ???
after connecting to pc via usb nothing happend ...
1krzys said:
hello, after update to 4.4.4 i can't connect to pc, can someone help me ???
after connecting to pc via usb nothing happend ...
Click to expand...
Click to collapse
How I like detailed errors descriptions...
What type of connection you use ?
Media transfer or storage ?
What is your comp running ?
Windows ? Which one ?
Linux ?
Did you install usb drivers ?
actually mine has USB transfer problems in whatever mode i connect it.
all of them are veeeery slow, often it hangs forever.
transfers over wifi is kinda the only way here
on win7 with the stock usb cable.
Hey guys, after my phone's last software update I have sort of a problem. I can't connect it to my computer. When I plug it in the computer it says USB device not recognized and I've tried on more than one pc and the results are similar. I tried installing new drivers and LG pc suite (which work but with the wireless connection). And my G Pad 8.3 works like a charm so the problem must be in my phone. The software version which i received is v20u.
Oh and I tried factory reset and again it didn't work. I hope you can help with this bizarre problem.
Try switching in the USB connection option to ptp....
jonnyszt said:
Try switching in the USB connection option to ptp....
Click to expand...
Click to collapse
Can you explain how to do that? Thanks
When u hook it to ure pc. In ure notif bar pull down itll say usb options or cahrge only or such click it and change it thsre this. Is on ure phone not pc
yeah but that's the problem my phone recognize the usb only like charger and no matter if i put it in the computer it still only charge the battery and doesn't show the usual options about the pc connection.
Why So Serious said:
yeah but that's the problem my phone recognize the usb only like charger and no matter if i put it in the computer it still only charge the battery and doesn't show the usual options about the pc connection.
Click to expand...
Click to collapse
Have a look here it may help >> http://forum.xda-developers.com/lg-g3/help/answer-windows-8-8-1-detecting-lollipop-t2967574 <<
I saw that before i wrote the thread but I can't seem to find " ACER Composite ADB Interface" in my device manager neither when my phone is connected nor when it's not. I think it might be something with the latest software cause before that I never had a problem connecting it to the pc.
PS: i even tried connecting the phone to my TV to see if it'll find it like a flashdrive and againt it started charging and nothing else