ok i have a sprint 4gET flashed to cricket.. running Team Acheron's "Touched by an S4" (Awesome) after checking out some of the new roms coming out I decided to flash a few and check out the new cm10.1.3 and the jb4.3 systems... I am familiar with the procedures for flashing jb, ics roms and follow op directions to a t everytime..but today after losing data cable connections twice on an odin install my phone would not respond... after leaving batt and sd card out of phone for 2 hrs I was finally able to set phone into download mode.. flashed directboot recovery by cwm wich cot me to my sd card to reflash my trusty touched by an s4 rom but now when it boots up my samsung screen displays a totally diffferent model.. it says Samsung Sll GT-i9100 but in settings it still says sph-d710... how on earth did that happen and how can i change it...
Install and run triangle away from chainfire paid on play store or free from xda. It's what happens when you use Odin to install non official firmware
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
mkfryan said:
Install and run triangle away from chainfire paid on play store or free from xda. It's what happens when you use Odin to install non official firmware
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Not true in all cases^^
some of the direct boot Odin & Mobile Odin files (EL26 or EL29) were originally made from the international phone source and when the kernal is flashed it will reflect the i9100 on boot up. This is normal if your phone is working properly. You can also one-click back to EL26 stock to get rid of it, but then you have to go through the process of re-formatting the partition.
If it is working fine, I would use Triangle Away. If not, you will probably need to start over with a one-click exe.
byrdcfmma said:
Not true in all cases^^
some of the direct boot Odin & Mobile Odin files (EL26 or EL29) were originally made from the international phone source and when the kernal is flashed it will reflect the i9100 on boot up. This is normal if your phone is working properly. You can also one-click back to EL26 stock to get rid of it, but then you have to go through the process of re-formatting the partition.
If it is working fine, I would use Triangle Away. If not, you will probably need to start over with a one-click exe.
Click to expand...
Click to collapse
super thanks to mkfryan and byrdcfmma for a super prompt reply and for their super knowledge on these devices... you guys rock!!
THANKS TO ALL XDA DEVS YOU GUYS ARE SIMPLY AMAZING!!!!
Related
Hey guys. I'm having some issues installing kernels. I'm aware of how to do the process but aside from the CWM kernels and the stock kernel that's installed when you odin back to stock every other kernel I flash results in a boot loop.
Things like ROMS and zips install fine in CWM but as long as the file has a custom kernel I get boot loops.
Anyone have any idea how I can go about fixing this so I can install ROMs on my phone?
Can anyone help? Plz???
Probably because your well on your way to bricking your epic.. kernels are rom specific just cause theres many out there doesnt mean you can flash anyone over any rom..
I wouldnt really play with cwm just yet phones to new... alot people are bricking this device fasst ..I was one of them.
If u wanna play safe use stock rom with zedomaxepicv3 1.6 oc kernel flash that tar in odin after u go back to stock eg30.tar
give development some time ..let others go through trial and error.
Spare your device she will brick trust me.
Sent from my SPH-D710 using XDA Premium App
lojak29 said:
Probably because your well on your way to bricking your epic.. kernels are rom specific just cause theres many out there doesnt mean you can flash anyone over any rom..
I wouldnt really play with cwm just yet phones to new... alot people are bricking this device fasst ..I was one of them.
If u wanna play safe use stock rom with zedomaxepicv3 1.6 oc kernel flash that tar in odin after u go back to stock eg30.tar
give development some time ..let others go through trial and error.
Spare your device she will brick trust me.
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
Nothing that I'm doing should result in a hard brick with this phone. The issue isn't that I'm flashing different kernels with any random ROM. It's that ROMS don't install properly because of the issue my phone is having with kernels.
I've tried to install Zedomax's latest kernel immediately after going back to the stock eg30 tar before and I wasn't able to do that either. It resulted in me getting a boot loop as well (that had to then again be fixed by flashing the eg30 tar).
It's a weird issue that I don't see others having on the forum and honestly I think it's possible that it might be a small fix such as flashing a particular tar or possibly formatting some area of the phone, but I'm just not sure how to address the issue.
Heres what u do worked for me ok
Step by step
Go to stock with eg30.tar its a 435-450mb file
Use the odin version 1.85 reccomended
Enable usb debug on epic
Get into download mode
Only select pda and choose the zedomaxepic v3 1.6oc kernel it is a tar file should be in android dev section or google it.
Only selct auto reboot should already be checked in odin , do nothing else and do not use any pit file.
Then you should get a successful flash then phone boots up as galaxy s 2, gt 19100 with a yellow triangle that means it flashed
Thats exactly how i did it.
Sent from my SPH-D710 using XDA Premium App
Flash the tar kernel with odin.. dont use the cwm zip method i bet that does it
Sent from my SPH-D710 using XDA Premium App
Yes samsung is known for that once ur on a kernel made for the device bit its really from a diff phone cause zedomax is a gti9100 kernel i a way u cant flash rom zips over a custom kernel
You can only use rom zips over stock kernel
The only way to flash zips is be on stock rom stock kernel first.
The best method is odin not cwm
Sent from my SPH-D710 using XDA Premium App
lojak29 said:
Heres what u do worked for me ok
Step by step
Go to stock with eg30.tar its a 435-450mb file
Use the odin version 1.85 reccomended
Enable usb debug on epic
Get into download mode
Only select pda and choose the zedomaxepic v3 1.6oc kernel it is a tar file should be in android dev section or google it.
Only selct auto reboot should already be checked in odin , do nothing else and do not use any pit file.
Then you should get a successful flash then phone boots up as galaxy s 2, gt 19100 with a yellow triangle that means it flashed
Thats exactly how i did it.
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
If I do this process in the order you have it here then when I try to install Zedomax's Kernel it hangs at zimage in ODIN and I have to disconnect the USB. The kernel never flashes and it stays on the official Samsung kernel.
This stuff is frustrating
Weird weird... It shouldnt hang anywhere as long as u see yellow com port in odin and you have correct tar put into pda only dont unzip anuthing just put download into winrar choose pda and select the downloaded tar.. When done itl say pass in green
Sent from my SPH-D710 using XDA Premium App
Make sure its the complete prerooted zedomaxepic v3 1.6 kernel no other version and it must be a .tar file not zip . In pda only let it sit sometimes it will fail keep trying but make sure ur on stock rom first..
That kernel willl give u over clocking ..root and cwm recovery all in one
Sent from my SPH-D710 using XDA Premium App
try another usb port, and/or another cable...
and you can just flash the stock repack with CWM to avoid flashing zedo first
lojak29 said:
Weird weird... It shouldnt hang anywhere as long as u see yellow com port in odin and you have correct tar put into pda only dont unzip anuthing just put download into winrar choose pda and select the downloaded tar.. When done itl say pass in green
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
I know what to expect in ODIN during a correct flash, I've used it multiple times, but for whatever reason, that particular tar file always end in a hang at zimage.
lojak29 said:
Make sure its the complete prerooted zedomaxepic v3 1.6 kernel no other version and it must be a .tar file not zip . In pda only let it sit sometimes it will fail keep trying but make sure ur on stock rom first..
That kernel willl give u over clocking ..root and cwm recovery all in one
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
I have the right file. And I already know how to obtain root and CWM with the few kernels my phone can flash (Which now that I think about it are mostly stock kernels with slight modifications). Overclocking isn't that important to me but overall my main problem is that when I'm in CWM I can't fully install ROMS. They install but do not flash over correctly/completely and cause boot loops. Other zips flash fine.
chris41g said:
try another usb port, and/or another cable...
and you can just flash the stock repack with CWM to avoid flashing zedo first
Click to expand...
Click to collapse
I've tried multiple USB cables, all result in the same thing. I've tried to flash the stock pack with CWM that you're talking about before and that works fine. i was able to root afterwards and everything but once I tried to install a ROM when I'm on that kernel. I get the same thing, boot loops.
are you sure its bootloops and not just taking a long time? because rebuilding the dalvik-cache can take a while and loop the bootanimation..
chris41g said:
are you sure its bootloops and not just taking a long time? because rebuilding the dalvik-cache can take a while and loop the bootanimation..
Click to expand...
Click to collapse
I can't imagine rebuliding the dalvik-cache should take in excess of 10 minutes or more (if it can, correct me). It just hangs at the Samsung Boot Animation that has the yellow triangle with the exclamation mark.
(I've left the phone on for about 15-20 mins before at this screen) I can only then access download mode,nothing else. No recovery and no booting.
Maybe just stay stock for now till development furthers..
Sent from my SPH-D710 using XDA Premium App
lojak29 said:
Heres what u do worked for me ok
Step by step
Go to stock with eg30.tar its a 435-450mb file
Use the odin version 1.85 reccomended
Enable usb debug on epic
Get into download mode
Only select pda and choose the zedomaxepic v3 1.6oc kernel it is a tar file should be in android dev section or google it.
Only selct auto reboot should already be checked in odin , do nothing else and do not use any pit file.
Then you should get a successful flash then phone boots up as galaxy s 2, gt 19100 with a yellow triangle that means it flashed
Thats exactly how i did it.
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
I'm not experiencing the boot issues but, I found there is a lot of information out there regarding kernels and rom's. This is good stuff here. By doing this method, will it root the phone? After doing this, I would like to get rid of the yellow triangle. Mostly just annoys me. Is there an easy way to do that?
I see a method chris41g provided for doing it.
http://forum.xda-developers.com/showthread.php?t=1297999
Is it possible to just use that stock tar and then use zedomaxepic v3 1.6oc kernel? Or is it the kernel that causes the triangle?
Sorry for so many questions. I'd like to do this once and do it right the first time. I came from the Bonsai ROM on the Epic 4g. It has been a while since I have had to do this.
Thanks for your time.
taaz69 said:
I'm not experiencing the boot issues but, I found there is a lot of information out there regarding kernels and rom's. This is good stuff here. By doing this method, will it root the phone?
The kernel is pre-rooted so, yes it will root the phone.
Is it possible to just use that stock tar and then use zedomaxepic v3 1.6oc kernel? Or is it the kernel that causes the triangle?
Yes it is the kernel that causes the triangle.
lojak29 said:
Maybe just stay stock for now till development furthers..
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
Development furthering itself doesn't necessarily mean I still wont have issues later.
Click to expand...
Click to collapse
Can anyone else help with this issue? I still haven't come across a fix.
Maniaclyrasist said:
Can anyone else help with this issue? I still haven't come across a fix.
Click to expand...
Click to collapse
Have you tried going completely back to stock? It will remove root and cwr. Then try odin chris41g repacked stock pulled kernel with cwr (can't remember if it provides root or not) but you xan always flash the root zip.
Here's back to stock : http://forum.xda-developers.com/showthread.php?t=1282420
Sent from my SPH-D710 using xda premium
Duce HD2 said:
Have you tried going completely back to stock? It will remove root and cwr. Then try odin chris41g repacked stock pulled kernel with cwr (can't remember if it provides root or not) but you xan always flash the root zip.
Here's back to stock : http://forum.xda-developers.com/showthread.php?t=1282420
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I've had to go back to stock multiple times. Every time I've tried to flash a ROM it's run into a boot loop and the only way that I can access the phone again is to ODIN back to stock, install one of the few kernels I can that has CWM and restore a backup. The kernel you mentioned in your post is one of the few my phone will take but others like the Lost Kernel and Zedomax's OC ones will send the phone into a boot loop.
I simply just updated to ei22 from clockwork mod and its not booting!
newguy0804 said:
I simply just updated to ei22 from clockwork mod and its not booting!
Click to expand...
Click to collapse
A little more information please...
Did you attempt the manual update zip via flashing it in CWM?
Did you flash a custom GB based ROM?
Thanks.
I am ...was running a rooted froyo stock rom that came with the phone.
I followed this guide....for the most part I just installed the gingerbread folder from cwm and rebooted now im stuck.http://www.youtube.com/watch?v=FB956i_KEp4
link to the video i used
Could be a bad flash.
Redownload, wipe, and try again.
Sent from my SPH-D700 using XDA App
i have to be at thanskgiving an need my phone for driections now can u juyst tell me how to back to stock quick! like real quick! i cant get the com light to show up on odin!
If you followed the instructions right, you've already hosed what was previously your "stock" rom.
First, did you make a backup?
If so, wipe and restore.
If now, flash a new rom.
Did you already update the modem?
If its still on EC05, flash an EC05 rom.
Sent from my SPH-D700 using XDA App
MY PROBLEM IS THat i cant even get it to show up on odin!
You don't Odin to flash a rom, so that's beside the point right now.
Don't get flustered here, I am trying to help.
Sent from my SPH-D700 using XDA App
Dude, just restore your nand backup.
If you want to go back to stock and become unrooted, go to youtube and search samsung epic return to stock. Watch qbkings video. You will need the ec05.tar file, samsung drivers for your pc, and one additional file that should come with odin, and a valium. There are turtorials everywhere around here, but for step by step "easy" instructions, use qbkings video.
Sent using my overclocked 1.44 GHz Samsung Epic running legendary ROM beta : samurai v1.0.4
newguy0804 said:
MY PROBLEM IS THat i cant even get it to show up on odin!
Click to expand...
Click to collapse
Two options if odin doesn't see your phone. Try a different cable I bought mine at staples 15 dollars for a better 6 foot cable. Second option is remove the battery hold down 1 and power insert battery. That should get you back in. Then odin to stock ec05. Find a rom of your choice like randomrom thunderhawk. After it installs use the ec05 to ei22 modem flash. That is the method that I upgraded worked like a champ.
If odin doesn't see your phone, try disabling your antivirus and firewall that was causing me problems a while back with Norton I think.
Hello, I was on an ics rom and wanted to flash a different, so I mobile odined the el26 kernel which I thought it was the cwm one.... I guess not and now the only thing I can do is get to stock recovery and all that let's me do is apply an update. Is there anything I can put on the sd card ofu other phone and then swap that the recovery will let me flash? I know I can just odin when I get home but trying to do this from work. Thanks
Sent from my PH44100 using XDA
Mobile Odin in play store
Sent from my ridiculously long named phone ---
Sprint Samsung Galaxy S II Epic 4G Touch
dcaplinger76 said:
Hello, I was on an ics rom and wanted to flash a different, so I mobile odined the el26 kernel which I thought it was the cwm one.... I guess not and now the only thing I can do is get to stock recovery and all that let's me do is apply an update. Is there anything I can put on the sd card ofu other phone and then swap that the recovery will let me flash? I know I can just odin when I get home but trying to do this from work. Thanks
Sent from my PH44100 using XDA
Click to expand...
Click to collapse
You could put your phone into download mode and install one of sfhub's one click factory restores.
He has one for pretty much every version.
Latest Gingerbread: http://forum.xda-developers.com/showthread.php?t=1433101
Latest ICS: http://forum.xda-developers.com/showthread.php?t=1671356
There is one kernel with CWM and one without it.
You'll have to wait until you get home. You have a GB kernel with an ICS ROM and that's why it won't boot all the way. And since you can't turn the phone all the way on Mobile Odin is out of the question. There really is no way to fix it without your computer.
MeWarning said:
You'll have to wait until you get home. You have a GB kernel with an ICS ROM and that's why it won't boot all the way. And since you can't turn the phone all the way on Mobile Odin is out of the question. There really is no way to fix it without your computer.
Click to expand...
Click to collapse
This. You're going to have to use odin on a computer.
Sent from my SPH-D710 using Tapatalk 2
Im having some trouble and am wondering if someone could help me out. I came from red's freegs3 R6 rom and I decided to use the super wipe zip found in the op. I followed instructions to the T and when I tried flashing this rom (xquizite) after the superwipe my phone rebooted into the galaxy s 3 screen. It wont move from there. I cant access recovery because it seems that superwipe wipe the recovery too lol.
I boot into odin and all I get is downloading do not turn off target. What is it downloading?
I guess I have to flash a new recovery but I cant access anything on my phone. I'm trying to use the toolkit found in the sticky's but I can't get usb debuggin on to flash the recovery. Can someone help me with steps to get this straightened out.
Its booting into download mode. Install odin onyour pc, download the latest firmware, plug in your phone and go. Theres plenty of tuts on odin and I dont want to mess something up by going from memory.
I dont think superwipe does anything to recovery so not sure what hapoened to you there.
You are not bricked though.
Sent from my SGH-T999 using xda app-developers app
You aren't bricked, I can tell you that. Have you tried to Odin back into stock?
I'm downloading stock rom now. This means I need to reroot right?
Clearly there is a miscommunication on what Odin is. You don't boot into Odin you boot into download mode. Odin is a PC app that you use on your phone while your phone is in download mode. It isn't downloading anything unless Odin is pushing software to it from your PC. It just always says downloading.
Sent from my SGH-T999
Okay thanks for the correction. Yes im in download mode. Is it okay to push any other rom rather than stock thru odin or is odin made only for stock pushes?
DocHoliday77 said:
Its booting into download mode. Install odin onyour pc, download the latest firmware, plug in your phone and go. Theres plenty of tuts on odin and I dont want to mess something up by going from memory.
I dont think superwipe does anything to recovery so not sure what hapoened to you there.
You are not bricked though.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
.
Seriously, turn that phone off now, while you can still get into download mode, start reading these forums, EVERY answer is there, before you hardbrick it. From what you posted, YOU my friend are not ready to flash anything.
Sent from my SGH-T999 using xda premium
elracing21 said:
Okay thanks for the correction. Yes im in download mode. Is it okay to push any other rom rather than stock thru odin or is odin made only for stock pushes?
Click to expand...
Click to collapse
If someone makes a tar package....it flashes tar packages to the phone containing modem, system, MDM , data and partitions basically whole stock firmwares I am going to find u a package that is already rooted and ready to go in Odin. If u do it any other way (root) u will have to flash an insecure kernel. So this package will flash the stock firmware and root u from there I suggest flashing recovery right after. I would use twrp.......follow directions carefully here.....download goo manager beta from market then install it open it give it superuser perms. Then hit menu on Ur phone and go to "install open recovery script" this will download recovery (twrp) and install it for u when it says its done just reboot into recovery. IMO twrp way better then cwm and cwm is somehow always linked to imei. Always disappearing ...never heard of any problems with twrp and it does backups and restored quicker.
OK so basically to be on the safe side u need to flash stock recovery on your phone first so the Odin package completes with no problems. This will also be a tar.
Then u will flash the stock ROM tar
After that Is complete u will be rooted and have stock ROM
Now do as I said with the goo managerapp
Here is link for stock ROM with root included...thank Mr.Robinson
https://s3.amazonaws.com/test_file_66/root66_TMO_T999UVALH2.7z
Here is Odin
http://forum.xda-developers.com/attachment.php?attachmentid=1270006&stc=1&d=1345396888
And stock recovery tar
http://forum.xda-developers.com/attachment.php?attachmentid=1269983&d=1345396194
So download the Odin program I linked u then download the stock recovery tar. Put your phone into download mode...pull battery out put back in hold vol down home and power. Then when it tells u warning blah blah just hit up. Now connect to PC and start Odin. U should see on left side it should say "added" that means your connected. Now hit PDA find stock recovery flash it. When that's done and it reboots go back into DL mode. Now DL the rooted stock ROM package and extract it to your desktop when it is done being downloaded. Now repeat process hook to PC hit PDA find stock ROM tar on your desktop flash it make sure u don't hit anything else in Odin just PDA! Leave everything else as is. Now that should take around 8 min to flash when that is done u should be running newest ota uvalh2 rooted. Boot up and do the goo manager steps I told u to get recovery or u could use ROM manager for cwm but I do not recommend it with this phone. Good luck and don't use the super wipe anymore .....for your sake
---------- Post added at 08:17 PM ---------- Previous post was at 08:15 PM ----------
Sorry for spelling got a crazy 2 yr old boy running up and down my house tearing **** up
sarni84 said:
If someone makes a tar package....it flashes tar packages to the phone containing modem, system, MDM , data and partitions basically whole stock firmwares I am going to find u a package that is already rooted and ready to go in Odin. If u do it any other way (root) u will have to flash an insecure kernel. So this package will flash the stock firmware and root u from there I suggest flashing recovery right after. I would use twrp.......follow directions carefully here.....download goo manager beta from market then install it open it give it superuser perms. Then hit menu on Ur phone and go to "install open recovery script" this will download recovery (twrp) and install it for u when it says its done just reboot into recovery. IMO twrp way better then cwm and cwm is somehow always linked to imei. Always disappearing ...never heard of any problems with twrp and it does backups and restored quicker.
OK so basically to be on the safe side u need to flash stock recovery on your phone first so the Odin package completes with no problems. This will also be a tar.
Then u will flash the stock ROM tar
After that Is complete u will be rooted and have stock ROM
Now do as I said with the goo managerapp
Here is link for stock ROM with root included...thank Mr.Robinson
https://s3.amazonaws.com/test_file_66/root66_TMO_T999UVALH2.7z
Here is Odin
http://forum.xda-developers.com/attachment.php?attachmentid=1270006&stc=1&d=1345396888
And stock recovery tar
http://forum.xda-developers.com/attachment.php?attachmentid=1269983&d=1345396194
So download the Odin program I linked u then download the stock recovery tar. Put your phone into download mode...pull battery out put back in hold vol down home and power. Then when it tells u warning blah blah just hit up. Now connect to PC and start Odin. U should see on left side it should say "added" that means your connected. Now hit PDA find stock recovery flash it. When that's done and it reboots go back into DL mode. Now DL the rooted stock ROM package and extract it to your desktop when it is done being downloaded. Now repeat process hook to PC hit PDA find stock ROM tar on your desktop flash it make sure u don't hit anything else in Odin just PDA! Leave everything else as is. Now that should take around 8 min to flash when that is done u should be running newest ota uvalh2 rooted. Boot up and do the goo manager steps I told u to get recovery or u could use ROM manager for cwm but I do not recommend it with this phone. Good luck and don't use the super wipe anymore .....for your sake
---------- Post added at 08:17 PM ---------- Previous post was at 08:15 PM ----------
Sorry for spelling got a crazy 2 yr old boy running up and down my house tearing **** up
Click to expand...
Click to collapse
Thank you I managed to get back to stock, reroot, reflash custom rom on new baseband.
As for the other guy telling me im not ready to flash anything. Thanks for the positive reinforcement and for your help you really did contribute SOO much to my problem.
I remember superwipe doing this when I owned the g2 it always messes my recovery.
I thought I remembered you from the G2 forums. Glad you got your phone fixed. I'm still trying to figure this phone out. Odin stuff is weird to me. I'm used to flashing. I will admit, rooting the g2 was way harder.
Sent from my SGH-T999 using xda premium
I actually wouldn't recommend using superwipe since it wipes your internal sd card.
Sometimes its best to do a full wipe. Especially if you are having problems.
Sent from my SGH-T999 using xda app-developers app
mrbmg said:
I thought I remembered you from the G2 forums. Glad you got your phone fixed. I'm still trying to figure this phone out. Odin stuff is weird to me. I'm used to flashing. I will admit, rooting the g2 was way harder.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
You flash everything after the initial root so no worries. The G2 really was a ***** to root. I did it a few weeks ago and it brought me waaaay back to the OG Incredible days.
Sent from my SGH-T999
Yup. It was so easy. You didn't have to worry about a flashing a .zip or odin a .tar. half the time people are so freaking confused and flash the .tar.
Sent from my SGH-T999 using xda premium
joshnichols189 said:
You flash everything after the initial root so no worries. The G2 really was a ***** to root. I did it a few weeks ago and it brought me waaaay back to the OG Incredible days.
Sent from my SGH-T999
Click to expand...
Click to collapse
heck yeah it was hard. I remember I was Shi*ing bricks when I rooted it. It was fun tho.
mrbmg said:
Yup. It was so easy. You didn't have to worry about a flashing a .zip or odin a .tar. half the time people are so freaking confused and flash the .tar.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yeah Odin had me confused but I guess you have to mess something up to learn something new when it comes to Rom and flashing stuff. I figured everything all out. I just wish people were less jerks and not so quick to judge. I've been flashing since the g1 its just this is my first Samsung phone. But oh well... glad to have you guys on this neck of the woods!
Posted from what apple calls "basically an iPhone" SGS3
Bricked - Hardbricked???
If the device is hardbricked - I'm pretty sure that's what happened...what are my options to fix it?
thanks in advance
PS I have searched everywhere for a solution
thesoze said:
If the device is hardbricked - I'm pretty sure that's what happened...what are my options to fix it?
thanks in advance
PS I have searched everywhere for a solution
Click to expand...
Click to collapse
Your phone is bricked as well? If you know it's hard bricked then check this out. Only way to fix it http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Sent from my SGH-T999 using xda app-developers app
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Hi Guys need help bad. I hope I didnt screw my phone up.
I rooted my phone using the latest toolkit and installed twrp. Once i did that I backed up everything including efs on the external card.
Once i did that I flashed Jedi x rom but did not have much signal so decided to flash another rom which was liquid smooth. Once I flashed it again
my signal was almost non existent. I downloaded a canadian modem in the zip file and flashed it using twrp the same way i would flash a rom.
After i did that i wiped all the data and cache and the system. As I was rushing it siince its late at night i got a message saying that I am not rooted. I ignored it and rebooted the system and now its stuck on samsung logo. What can i do? Please help!!!!!
It appears that when I hold vol up plus home plus power I can get into download mode. I hope that helps.
Can someone give me some help how to get it back to life. I am pretty sure I have to use Odin at this point but dont know how
Ok i did some reading and I think the next step is to download stock image for the wind mobile turn on Odin and upload the image to the phone..
What settings should I use in Odin? What should be checked at the top and am I to use PDA only?
You can use odin or just reflash the ROM. You said tout wiped system after flashing the modern. That means you erased what ever ROM was on there. It's sticking at Samsung because there is no ROM to boot into.
Sent from my SGH-T889 using xda app-developers app
kintwofan said:
You can use odin or just reflash the ROM. You said tout wiped system after flashing the modern. That means you erased what ever ROM was on there. It's sticking at Samsung because there is no ROM to boot into.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Well I cant get into TWRP and dont know how to flash a ROM through ODIN? I am total newb at this.
Could you give me some pointers once I open up odin what do i need to do ? Thanks
Have you puked the battery. Put it back in then held volume+, home and power? Your recovery should still be there.
Also, odin is easy. Just open it and click the pda box and put your stock ROM there. Two things make sure you put your image in PDA and PDA ONLY and make sure it's your official stock Image
Sent from my SGH-T889 using xda app-developers app
kintwofan said:
Have you puked the battery. Put it back in then held volume+, home and power? Your recovery should still be there.
Also, odin is easy. Just open it and click the pda box and put your stock ROM there. Two things make sure you put your image in PDA and PDA ONLY and make sure it's your official stock Image
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Yup went back to ODIN and flashed stock image and everything is now working great. I assume that I need to root the phone again before attempting to flash any roms again. I guess it was late at night and like you said I wiped the rom and there was nothing to boot into. I am an idiot!
Thanks for your quick help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
vseslija said:
Yup went back to ODIN and flashed stock image and everything is now working great. I assume that I need to root the phone again before attempting to flash any roms again. I guess it was late at night and like you said I wiped the rom and there was nothing to boot into. I am an idiot!
Thanks for your quick help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Next time odin this http://forum.xda-developers.com/showthread.php?t=1975560 pre-rooted doesn't trip the counter,,,
deeznutz1977 said:
Next time odin this http://forum.xda-developers.com/showthread.php?t=1975560 pre-rooted doesn't trip the counter,,,
Click to expand...
Click to collapse
Ok so here's my next question.
In order to root again do i use the toolkit again or simply just download the pre-rooted rom and flash it with Odin? Which one would be better just
to get root again? Thanks!
vseslija said:
Ok so here's my next question.
In order to root again do i use the toolkit again or simply just download the pre-rooted rom and flash it with Odin? Which one would be better just
to get root again? Thanks!
Click to expand...
Click to collapse
Download the rom from the link i posted..flash in Odin Thats it pre rooted
deeznutz1977 said:
Download the rom from the link i posted..flash in Odin Thats it pre rooted
Click to expand...
Click to collapse
When I did this approach, I did it in two steps. I downloaded factory image of the firmware and flashed the device by using Odin 3.0.7.
Next, I used a tool package called "Galaxy Note2 ToolKit." Follow the instructions for how to root.
When I did the procedure, the software also had an option to include clockworkmod recovery
and busybox.
Gideon.