For no valid reasons AT&T Galaxy S3 stock ROM I747UCDLK3 has been nowhere to be found for download.
Both links from Sammobile and Samsung-updates only says "This file is either removed due to copyright claim or is deleted by the uploader"
There must be something fishy goin on right here, they don't even released the full stock of recent UCDMG2 update. This is the first time I heard somebody filed copyright infringement of those stock firmware? Why the heck it's only the UCDLK3 and not all other older stock versions like LEM and LG1. So watch out AT&T subscribers!
Its still up in the development forum if needed.
It can still be flashed from the official KIES software.
pre4speed said:
Its still up in the development forum if needed.
Click to expand...
Click to collapse
jack man said:
It can still be flashed from the official KIES software.
Click to expand...
Click to collapse
I think the thing is not that can't find file, but that he noticed that specific file is target for ©/unloaded.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
DroidAngel said:
For no valid reasons AT&T Galaxy S3 stock ROM I747UCDLK3 has been nowhere to be found for download.
Both links from Sammobile and Samsung-updates only says "This file is either removed due to copyright claim or is deleted by the uploader"
There must be something fishy goin on right here, they don't even released the full stock of recent UCDMG2 update. This is the first time I heard somebody filed copyright infringement of those stock firmware? Why the heck it's only the UCDLK3 and not all other older stock versions like LEM and LG1. So watch out AT&T subscribers!
Click to expand...
Click to collapse
4.1.1 and earlier can be easily unlocked thru dialpad... calculator then dial pad for tablets like tab 2. Can't think of a more money hungry reason. AT&T... Rethink Enslavement
Lt1streconbn said:
4.1.1 and earlier can be easily unlocked thru dialpad... calculator then dial pad for tablets like tab 2. Can't think of a more money hungry reason. AT&T... Rethink Enslavement
Click to expand...
Click to collapse
I think it's more because of the boot loader update... Just to avoid idiots bricking their phones flashing software with odin. It was removed for avoidance of disaster...
Maybe
DexedrineXR said:
I think it's more because of the boot loader update... Just to avoid idiots bricking their phones flashing software with odin. It was removed for avoidance of disaster...
Click to expand...
Click to collapse
But why take down the stock firmware? I just needed it to fix auro rotation in one of my kids s3. I found it with help from an op anyway and it did the trick. I just remember 4.1.1 and earlier were simple to unlock. 4.1.2 done away with that method. 4.1.2 is still available for download also. I elieve 4.0.4 is too though, so my theory has some holes in it if it is. Whats tough is finding US stock firmware for sgh-i497. I flashed umama1 or umama2 and lost my wifi for a day. Found 1 rom finally and fixed it with 4.0.4. Need to find or make a JB rom for it after it gets repaired y Samsung. LCD went bad Gotta update N S3 to kk soon also... I never like flashing a new bootloader and knox bugs me 8n the new version.
DexedrineXR said:
I think it's more because of the boot loader update... Just to avoid idiots bricking their phones flashing software with odin. It was removed for avoidance of disaster...
Click to expand...
Click to collapse
You were right about the bootloader, but wrong with the reason. Its identical to the S4 bootloader aside from the S4 having a critical value of '1' in this code somewhere... Thing us though, that the LK3 bootloader could remain intact and signed, therefore flashed and accepted by the S4 as an update... That us IF it turns out to be truly identical lol. I got a lotta code to read over. Caffeine time.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I am VERY new to all of this. I had a Windows 640, which I hated. And got this S3, I love everything except the os. (Previous device Sprint S4 w/lollipop). Anyway, I have the 4.1.1 os. Its rooted to Metro (was AT&T). But I want to upgrade the os to slimkat 9.0. I just don't have a clue what I need or how to do it. And can it be done w/o pc? As a note (included r screenshots). I have supersu, it has a feature to "full root", do I want to mess with that? If so, what are the benefits. I don't want to brick this and want to learn how. Maybe someday try to unlock sim on Sprint S4 ( has knox)!
Anyone who can help with the right info will be greatly appreciated!
Thanks
Tried to upload sshots but couldn't. Here's the info
SGH-I747. ROOTED
AND VER: 4.1.1
BASEBAND: UCDLK3
TWRP (BASIC) RECOVERY
DRIVER NAME d2att
ROM INSTALLER APP Changelog 1.2.6.2
GOO MANAGER
SUPERSU V2.46
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
mcrue69 said:
I am VERY new to all of this. I had a Windows 640, which I hated. And got this S3, I love everything except the os. (Previous device Sprint S4 w/lollipop). Anyway, I have the 4.1.1 os. Its rooted to Metro (was AT&T). But I want to upgrade the os to slimkat 9.0. I just don't have a clue what I need or how to do it. And can it be done w/o pc? As a note (included r screenshots). I have supersu, it has a feature to "full root", do I want to mess with that? If so, what are the benefits. I don't want to brick this and want to learn how. Maybe someday try to unlock sim on Sprint S4 ( has knox)!
Anyone who can help with the right info will be greatly appreciated!
Thanks
Tried to upload sshots but couldn't. Here's the info
SGH-I747. ROOTED
AND VER: 4.1.1
BASEBAND: UCDLK3
TWRP (BASIC) RECOVERY
DRIVER NAME d2att
ROM INSTALLER APP Changelog 1.2.6.2
GOO MANAGER
SUPERSU V2.46
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
Before doing anything else, I would recommend doing the free sim (carrier) unlock while you are still on 4.1.1. This will give you more options in the future. The method can be found in these forums.
If you were on AT&T I would say there is a chance you could take OTA updates to get to a bootloader that would work with SlimKat 9.0. I don't imagine you can do this.
Just noticed you have TWRP. Which version do you have? you will need a fairly new version to flash SlimKat 9.0 and a newer bootloader and modem, check HERE for both .tar and .img files.
You will probably be able to run slimKat from the MJB bootloader and modem (from the 4.3 rom). You could even do so with the MJ2 bootloader and modem, but you would need a custom kernel such as ktoonsez to do so. If MJB does not work well for you NE4 definitely would, it is from the 4.4.2 release.
Thank you for your response. After posting, I did a root check and found that the phone had only been partially rooted. I downloaded the apk root master. From there I had already downloaded the slimkat 7.0, I was mildly impressed, and now desperate as this is my only working device. Plus, I was terrified I was about to brick it. Anyway, I found LiquidSmooth KitKat os. 4.4.4, downloaded it plus gapps. Everything seems great! Still don't get the connectivity Metro shows for my area, but no bad. But I do have an issue with the front camera. When you take a pic, the phone reboots. The gapps came with Google camera. Tried the camera 360...exact same issue. Not that big a deal. I know have far more flexibility with my service provider in the settings.
So, thanks again for the info. I still have a SCH-720T I wanna do a sim unlock. Between Sprint,Knox and lollipop. Everything I've read says I've got my work cut out !
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
mcrue69 said:
Thank you for your response. After posting, I did a root check and found that the phone had only been partially rooted. I downloaded the apk root master. From there I had already downloaded the slimkat 7.0, I was mildly impressed, and now desperate as this is my only working device. Plus, I was terrified I was about to brick it. Anyway, I found LiquidSmooth KitKat os. 4.4.4, downloaded it plus gapps. Everything seems great! Still don't get the connectivity Metro shows for my area, but no bad. But I do have an issue with the front camera. When you take a pic, the phone reboots. The gapps came with Google camera. Tried the camera 360...exact same issue. Not that big a deal. I know have far more flexibility with my service provider in the settings.
So, thanks again for the info. I still have a SCH-720T I wanna do a sim unlock. Between Sprint,Knox and lollipop. Everything I've read says I've got my work cut out !
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
I have seen reports that Open Camera solves some of the camera issues on AOSP/CM roms.
I am beginning to have some problems with liquid smooth. I would still like the slimkat 9.0. I have twrp v 2.8.0.1, and recently downloaded the tar and img. I believe the modem I have is 4.1, I'm not sure as I just downloaded the liquid smooth KitKat 4.4.4. I'm still new to ALL of this. So I don't know how to get the most appropriate bootloader or kernal you mentioned. Is the slimkat 9.0 better? My connection really sucks now and so does batt life. SOS!!!!
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
SOS!!!, Need help with bootloader and modem
mcrue69 said:
I am beginning to have some problems with liquid smooth. I would still like the slimkat 9.0. I have twrp v 2.8.0.1, and recently downloaded the tar and img. I believe the modem I have is 4.1, I'm not sure as I just downloaded the liquid smooth KitKat 4.4.4. I'm still new to ALL of this. So I don't know how to get the most appropriate bootloader or kernal you mentioned. Is the slimkat 9.0 better? My connection really sucks now and so does batt life. SOS!!!!
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
. i recently installed the liquidsmooth 3.1 kitkat 4.4.4, but my baseband is DLK3. i have terrible connectivity issuses as you can imagine. here is the info i have and please i need help asap as this is my only working device. Its a SGH-I747, Liquidsmooth kk 4.4.4, v 3.1, baseband UCDLK3, kernal 3.4.91-deathly-1.7, TWRP v2.8.0.1. i tried to flash MJB but recieved a message "failed to recognize signature" Please help ObiWan, you're my only hope!
mcrue69 said:
. i recently installed the liquidsmooth 3.1 kitkat 4.4.4, but my baseband is DLK3. i have terrible connectivity issuses as you can imagine. here is the info i have and please i need help asap as this is my only working device. Its a SGH-I747, Liquidsmooth kk 4.4.4, v 3.1, baseband UCDLK3, kernal 3.4.91-deathly-1.7, TWRP v2.8.0.1. i tried to flash MJB but recieved a message "failed to recognize signature" Please help ObiWan, you're my only hope!
Click to expand...
Click to collapse
Are you having phone connectivity issues or data connectivity issues? If it is phone connection you may need a newer modem.
Before changing modems, have you checked that your APN settings are correct? You may need to verify this with Metro.
Since you said you tried to install the MJB modem but received an error, I guess we need to try to eliminate that problem. Did you try to install only the modem or both modem and bootloader? I would recommend installing the MJB baseband (=Modem) and bootloader together. Once you get past MJB version you must keep the bootloader and baseband matched, so we may as well start that practice now. Is it possible you had a bad download of MJB? Re-downloading may solve the problem.
Do not skip MJB and go to NE4 or NJ1, both newer versions of the modem and bootloader. All I have read indicates that you should update in order without skipping or risk bricking the device.
Your version of TWRP is recent enough that it should work with the files you need. (TWRP is now up to 2.8.7.0 for the d2att.)
I have data issues. I've located 2 sources to download the modem/bootloader you mentioned. The first is out of Quebec and has a bad signature. My device also skips md5 , not sure about the issue there. And the other source has too much red tape before I can get to the down load. I have the correct network settings. But I should have excellent 4g. I don't and I believe there is a conflict with the baseband/modem and the 4.4.4 liquidsmooth os.
And thanks a ton for all the help you have given!
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
---------- Post added at 05:15 AM ---------- Previous post was at 05:08 AM ----------
Should I undo the changes? And start over building from the original 4.1.1? If so, how would I undo these? Then just link me the the appropriate thread to do this correctly. Again, you have been a great asset. Thank you.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
mcrue69 said:
I have data issues. I've located 2 sources to download the modem/bootloader you mentioned. The first is out of Quebec and has a bad signature. My device also skips md5 , not sure about the issue there. And the other source has too much red tape before I can get to the down load. I have the correct network settings. But I should have excellent 4g. I don't and I believe there is a conflict with the baseband/modem and the 4.4.4 liquidsmooth os.
And thanks a ton for all the help you have given!
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
---------- Post added at 05:15 AM ---------- Previous post was at 05:08 AM ----------
Should I undo the changes? And start over building from the original 4.1.1? If so, how would I undo these? Then just link me the the appropriate thread to do this correctly. Again, you have been a great asset. Thank you.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
Frequently data issues are a matter of bad APN settings. Have you checked to see if yours are correct?
This thread by enewman17 discusses upgrading modem and bootloader starting at DLK3. He has links to bootloader and modem files. There should be no issues with signed files.
I have the SGH-I747
AND VER. :4.4.4
BASEBAND: MJ2
KERN #: 3.4.101 BMS-ASOP-G9528580
LS-KK-v3.1
BUILD: liquid_d2lte-userbug4.4.4KTU84P
8e3288b41test-keys
TWRP: 2.8.0.1
I have no WiFi, loses signal constantly, no front camera (shuts phone off when taking pictures )
Will not take MJ2 to NEW zip
And how do I UPGRADE TWRP?
Please someone help fix my issues. Connectivity was great at first, wasn't aware of WiFi issue till today. Front camera I can live without but if I can fix with the other issues, that would be great. The connection is stronger but drops like a rock, sometimes have to reboot phone.
Sent from my SPH-L720T using XDA Free mobile app
mcrue69 said:
I have the SGH-I747
AND VER. :4.4.4
BASEBAND: MJ2
KERN #: 3.4.101 BMS-ASOP-G9528580
LS-KK-v3.1
BUILD: liquid_d2lte-userbug4.4.4KTU84P
8e3288b41test-keys
TWRP: 2.8.0.1
I have no WiFi, loses signal constantly, no front camera (shuts phone off when taking pictures )
Will not take MJ2 to NEW zip
And how do I UPGRADE TWRP?
Please someone help fix my issues. Connectivity was great at first, wasn't aware of WiFi issue till today. Front camera I can live without but if I can fix with the other issues, that would be great. The connection is stronger but drops like a rock, sometimes have to reboot phone.
Sent from my SPH-L720T using XDA Free mobile app
Click to expand...
Click to collapse
That has information that may be the key to solving your issues.
I am extrapolating from much reading about people using the MJB, android 4.3, bootloader and modem on KitKat ROMs. The ROMs I read about were TouchWiz based, but the info may still apply. (MJ2 was the leaked release of MJB. The only difference I recall is that MJ2 did not include KNOX, and you can downgrade from it.)
People were having issues running the KK roms from both the MJ2 and MJB bootloader and modem while using the kernel that came with the custom TouchWiz ROMs. Their issues were solved by changing to one of two specific kernels. ibuddler developed one of the kernels, links to it can be found in the OP of LikeWise ROM. The other kernel was by ktoonsez, I don't have a link to his thread. You can not use a kernel for a TouchWiz ROM with an AOSP based ROM. Fortunately ktoonsez also has a kernel for AOSP roms.
Full disclosure, earlier Kitkat ROMs ran fine on MJ2 and MJB, it was later builds that needed either updated firmware or the custom kernels.
I found the kt747 zip and tried v3&v4 of ibuddler. Tried to reboot and each would not boot( over 10 min). But I was able to find this ad so far(fingers crossed) it seems to work just fine. I does switch from 4g to 3 when it is at idle.
3.4.101 leankernel-aosp_kitkat-9.9-+
lk_s3aosp_kitkat-v9.9.zip
I'm still trying it out,but so far so good. I'm still having issues getting an update for twrp. Speaking of updates. Liquidsmooth updated this morning. It updated the kernel and it was way wrong for my os.
Thank you so much for your patience with me in this journey into something I had no clue of. I still would like to update my bootloader and modem to NE4. But I want to wait before I screw something up. Do some more research as I am unable to use odin.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Related
I flashed the Root66 KitKat update for Wind Mobile using Odin. As I was looking through the settings I noticed there were no APNs set. I googled for Wind's APN configuration and manually entered them (before I even tested data, perhaps it was working regardless).
So far I've seen a number of mentions warning against flashing the 4.4.2 modem before flashing the 4.4.2 firmware update. However, I've yet to see the modem posted anywhere. The most recent one in the baseband thread was for 4.3. What am I missing?
Normally 4.3 modem will be working for 4.4 too but you should not have older modem then 4.3
Sent from my SGH-T999 using Tapatalk
It hasn't been posted for that same reason, so nobody will attempt to flash.. Anyone can make a flashable zip for the modem, that it why we are letting people know what happens when you try to flash on older firmware
Sent from my SGH-M919 using Tapatalk
Ill still post the modems in the near future, but wanted to first get that warning out so as many people as possible already know about it when I do. Flashing the 4 4.2 modem on 4.3 firmware has bricked quite a few devices in the Spirit and AT&T forums already. And despite all our efforts, we have yet to get the debrick method to work
That said, if you have a need for the modem, ill get it for you as soon as I can.
And just fyi, after updating to 4.4.2, you cannot use any older modems. They won't brick the device, but you won't have a working radio/signal.
DocHoliday77 said:
Ill still post the modems in the near future, but wanted to first get that warning out so as many people as possible already know about it when I do. Flashing the 4 4.2 modem on 4.3 firmware has bricked quite a few devices in the Spirit and AT&T forums already. And despite all our efforts, we have yet to get the debrick method to work
That said, if you have a need for the modem, ill get it for you as soon as I can.
And just fyi, after updating to 4.4.2, you cannot use any older modems. They won't brick the device, but you won't have a working radio/signal.
Click to expand...
Click to collapse
Heya Doc
I have a Gs3 T999v from Videotron and have been running the 4.3 modem since early this year. I'm currently running CM11 4.4.4.
I was wondering if it would be possible to provide a link for their 4.4.2 modem so I can give it a shot. I know I won't be able to come back from it, but reception with the 4.3 has not been that hot and I've been meaning to get those kinks out. Also since the phone is nearing the end of it's life, at least to me, I don't mind the extra risk. Even if it should technically be entirely safe to do so since i'm running 4.4.2+
Cheers!
I am not very much familiar with all intricacies of Android system but i have played around rooting and putting customer firmwares on few devices.
I have AT&T Galaxy S3 with following detals:
Baseband: I747UCUEMJB
Version: 4.3
I had the device rooted in the past but recently un-rooted it and reset the flash counter as well and did factory reset. Did all that since i wanted to use ISIS and couldn't make it work on a rooted S3. Seems it used to work before till they updated ISIS app to patch it.
Now AT&T got 4.4 update and my phone detects it, downloads it but while installing fails at 32%. I have seen many threads where people faced similar issues due to their phones being rooted. Seems something on my phone didn't reset to default.
I found one post which mentions that i can download UCUEMJB_to_UCUFNE4_Firmware_update.zip and load it to phone using TWRP. As i understand, this will update the baseband but android version still remains at 4.3 (?). Is that the path i should be looking for or i am shooting in wrong direction? I want to stay on default firmware since i like to use ISIS till they keep running those cashback promos
Would appreciate some feedback.
Download MJB firmware (thread in General) and flash with Odin. You can stop there or try the ota again.
DocHoliday77 said:
Download MJB firmware (thread in General) and flash with Odin. You can stop there or try the ota again.
Click to expand...
Click to collapse
Thanks for the reply.
Just to confirm so that i don't mess up, i will apply the following(is modem same as firmware?) and then try OTA.
I747UCUEMJB: modem_CWM_I747UCUEMJB.zip
No. The modem is only one part of the firmware. Firmware includes bootloaders, kernel, system, modem and more.
I have had several issues with the 4.4.2 OTA update on my I747 . The most annoying is the battery drain and "hot phone syndrome" which apparently is a bug related related to the camera daemon. Details can be found here http://tinyurl.com/KK-Batt
My goal is to throw 4.4.2 in the bit bucket and go back to stock 4.3 (when life was perfect), however I am leery of the older ROM's running on the newer NE4 bootloader and modem. I have done much reading on XDA for the past week (scortched eyeballs) but haven't found a 4.3 ROM that gives me any confidence ( they all state specifically to flash the MJB or MJ2 level firmware)
Has anyone sucessfully accomplished running 4.3 on the new NE4 bootloader / modem ?
I read a post from @DocHoliday77 that said this "should" be possible .....but I cannot afford a brick. The phone is my ISP, as I have no cable or DSL available , just a mediocre LTE signal from ATT (for which I am grateful)
I am considering this ROM http://forum.xda-developers.com/showthread.php?t=2504903
Thanks for any info or suggestions that you may have
You can flash any ROM you like as long as the ROM does not attempt to flash a new bootloader or modem.
The reason many ROMs require the 4.3 bootloader and modem is the fact that the ROM requires these two things to function properly.
audit13 said:
You can flash any ROM you like as long as the ROM does not attempt to flash a new bootloader or modem.
The reason many ROMs require the 4.3 bootloader and modem is the fact that the ROM requires these two things to function properly.
Click to expand...
Click to collapse
Thanks for the response audit13 , that all makes perfect sense ..... I was hoping maybe someone out there had suffered the same plight and tried this solution.
I read that the problem won't be corrected until android "L" (they attempted to fix it in 4.4.3 but failed). To me this is like Ebola for Android so I don't understand the lack of urgency by Google to correct it ??? Also, one would think a developer would have suffered this plague and been motivated to fix it.
This is not necessarily a Google problem. Samsung ROMs use Samsung kernels, not stock Google kernels.
Samsung is on 4.4.2 while custom ROMs are at 4.4.4.
audit13 said:
This is not necessarily a Google problem. Samsung ROMs use Samsung kernels, not stock Google kernels.
Samsung is on 4.4.2 while custom ROMs are at 4.4.4.
Click to expand...
Click to collapse
Yes but the problem exists in the Nexus line as well, looks like Sam inherited it in the source code. I have thought about trying a different kernel , but IDK if the problem is with the kernel or the daemon or a combination of both.
@audit13 since I am mostly a NOOB here maybe you can help me. I am about to try a custom ROM but am leery that they may mess with my bootloader and modem (NE4) is that possible or typical when you flash a ROM? or do they always state it if they do?
I was running the latest version of Liquid Smooth 4.4.4 and never experienced excessive battery drain or a hot phone on my Nexus 4. After a few days, I installed a custom kernel and my battery life improved but not by very much. Maybe I have been lucky with my Nexus 4. I tried Android L on my Nexus 4 for a while but didn't like the interface. Again, battery drain did not appear excessive on L.
I Don't have KK on my s3 as it is running 4.3 bootloader and modem with a custom ROM.
It is possible that a custom ROM will attempt to flash a bootloader or modem but I have never seen this happen other than a couple of ROMs for a Nexus 4. To ensure that a new bootloader/modem is not going to be flashed to your phone, make sure you look at the first few posts for instructions and warnings.
audit13 said:
I was running the latest version of Liquid Smooth 4.4.4 and never experienced excessive battery drain or a hot phone on my Nexus 4. After a few days, I installed a custom kernel and my battery life improved but not by very much. Maybe I have been lucky with my Nexus 4. I tried Android L on my Nexus 4 for a while but didn't like the interface. Again, battery drain did not appear excessive on L.
I Don't have KK on my s3 as it is running 4.3 bootloader and modem with a custom ROM.
It is possible that a custom ROM will attempt to flash a bootloader or modem but I have never seen this happen other than a couple of ROMs for a Nexus 4. To ensure that a new bootloader/modem is not going to be flashed to your phone, make sure you look at the first few posts for instructions and warnings.
Click to expand...
Click to collapse
Thanks for the feedback @audit13 much appreciated ...... I feel better now. I think I will try upgrading first since there has been no specific feedback on downgrading and my gut tells me it may not be the best idea SlimKat 4.4.4 looks interesting.
Hopefully you will not see a post from me in the future that starts with HELP !!!
I also have never seen a rom that flashes the bootloader or modem. Doing so would be a HUGE mistake!
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
I also have never seen a rom that flashes the bootloader or modem. Doing so would be a HUGE mistake!
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
@DocHoliday77 ....... Thanks Doc
Hey guys. I just got a galaxy s3 from virgin mobile SPH-L710 last week and I managed to install cyanogenmod 11 m10 on it. But to go to cm11 m11 asI've recently learned needs the latest bootloader and baseband.
I know there's two threads in the development section on how to get the latest stock nd8 update.
One had a link to download and open in Odin however the link doesn't seem to be good anymore.
The second thread is for the Odin one click full restore but when I run it it fails on aboot.nbm. I've tried using different USB cables too but it doesn't seem to do any good. Any ideads on how else to upgrade?
I can assure you this is false. I have a Virgin Mobile SPH-L710 on baseband MK5 and I am running a nightly build that is newer than M11 and have no issues.
You should be fine with a dirty flash over M10. Just wipe the cache before flashing.
OK that's intriguing. How did you get MK5 baseband? I just got my s3 last week and its on NF4 which I have no idea where that is in relation to any of the others i've seen around.
I've used the cm updator in settings to try one of the m11 nightlys earlier last week but I had no service so I restored a recovery of m10. Would performing a dirty flash of a nightly build be any different?
Erunur said:
OK that's intriguing. How did you get MK5 baseband? I just got my s3 last week and its on NF4 which I have no idea where that is in relation to any of the others i've seen around.
I've used the cm updator in settings to try one of the m11 nightlys earlier last week but I had no service so I restored a recovery of m10. Would performing a dirty flash of a nightly build be any different?
Click to expand...
Click to collapse
My phone came with MK5 on it, when the phones were shipping with 4.3 installed.
To be honest with you, I would disregard the modem/baseband concerns altogether if I were you. These phones do come with KNOX on them and flashing bootloaders and modems is seriously a huge risk. Flashing a bootloader older than the one you are currently on will trip the killswitch and you will have an irreparable hard brick.
The only time I could possibly think considerations with the bootloader would need to be made is if you were looking to flash a rooted stock TouchWIZ ROM that needed newer bootloaders/modems. But, I really can't speak to that, as I am trying to avoid TouchWIZ and am only familiar with AOSP ROMs.
You may need to flash an APN fix in addition to the ROM and GAPPs. I also use @decimalman's custom kernel, the DKP kernel and have no issues. Basically, when I am clean flashing nightlies the order goes like this:
In PhilZ Recovery found here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
ROM
GAPPs
Kernel
APN fix
Re-Root system for SuperSU
Reboot
I sent you the link for the APN fix, available in another active VM S3 forum, in your inbox. Download and flash the zip and that should fix any service-related issues you're having.
OK I did a clean flash of the latest nightly, flashed the apn fix then booted. Still no service. No apn are on the device nor is it able to save any I manually put in. And settings shows the baseband version as unknown as well as anything else that has to do with cell service.
Erunur said:
OK I did a clean flash of the latest nightly, flashed the apn fix then booted. Still no service. No apn are on the device nor is it able to save any I manually put in. And settings shows the baseband version as unknown as well as anything else that has to do with cell service.
Click to expand...
Click to collapse
And, you tried flashing all of those with the lateat version of PhilZ recovery?
Yes. I tried it with the latest version of philz and flashed all the zips you had listed in order but still the same old issues. However I noticed that WiFi still works. I can also go back to M10 and have no service issues. The other thing im noticing is that CyanogenMod thinks this is a SPH-L710 but apperently its really a SPH-L710T. The difference being that my phone has a tri-band radio for something to do with Sprints Spark.
Erunur said:
Yes. I tried it with the latest version of philz and flashed all the zips you had listed in order but still the same old issues. However I noticed that WiFi still works. I can also go back to M10 and have no service issues. The other thing im noticing is that CyanogenMod thinks this is a SPH-L710 but apperently its really a SPH-L710T. The difference being that my phone has a tri-band radio for something to do with Sprints Spark.
Click to expand...
Click to collapse
When you're on M11, have you checked in system root --> /etc folder to see if the apns-conf.xml is there? You might tru copying that over from the M10 build.
In the meantime, I'll look into the modem a bit more. The CM forum users all seemed to agree on that as a fix.
I have a friend's M919 that just got modem upgraded to latest 4.4.4 however wifi toggle /the wifi connection does not work.
Is there way to fix this?
If I remember correctly when first Tmobile m919 4.3 upgdate came out there was patch that allowed 4.3 modem to work properlyon MDL bootloader. I ve been searching but I could not find it anymore. I found couple guideson modem so sound is working but the wifi is not.
My poor friend is without a working phone at the moment.
Any help is appreciated.
Thank you all.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
You need to upgrade bootloader to current 4.4.4 firmware.
Mismatched bootloader and modem will cause WiFi not to work.
Pp.
PanchoPlanet said:
You need to upgrade bootloader to current 4.4.4 firmware.
Mismatched bootloader and modem will cause WiFi not to work.
Pp.
Click to expand...
Click to collapse
Thanks for your reply.
As far as I know, updating bootloader is a no no for ATT and Verizon variant if you have one of the older MDL boot loaders.
I get mixed responses on Tmobile version. Should I be worroed about anything in particular? As upgrading bootloader on these S4s is like crossing a bridge that you can never come back.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
If the model number is M-919 T-MOBILE phone then there is no issue as long as you follow M-919 model thread instructions in op.
Pp.
HELP!!
I just flashed latest NK2 firmware and the phone has no wifi.
Ah,,, what do I do?
I flashed it several times and it went through ok but wifi toggle does not work. Wifi does not work period. It won't even pick up...
Nobody has ever had wifi problem on M919? Anyone?
Download this https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
And check your info, make sure your bootloader matches the firmware number.
This will give you all the pertinent info on your phone.
Pp.