How to enable HD calls? - T-Mobile Samsung Galaxy S 4

How do I enable HD calls? Is there a specific service code I can type in a and check I have it enabled. It doesn't sound like I do.
Sent from my SPH-L720 using xda app-developers app

Look here
http://forum.xda-developers.com/showthread.php?t=2295439

jzero88 said:
How do I enable HD calls? Is there a specific service code I can type in a and check I have it enabled. It doesn't sound like I do.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Make sure the phone on the other end you are speaking to is also HDVoice capable and on the correct network (H/4G/3G) during the conversation. You can find info here in this very forum on the codes to check if WB-AMR is enabled. On mine it is *#0011# From there hit menu key then select "back". Then hit menu key and select "key input". Enter the number 1. Wait a second. Then choose WB-AMR STATUS and see if it is on. I'm running custom ROM so those steps might be a little different than what you'll need to do to check

jbdan said:
Make sure the phone on the other end you are speaking to is also HDVoice capable and on the correct network (H/4G/3G) during the conversation. You can find info here in this very forum on the codes to check if WB-AMR is enabled. On mine it is *#0011# From there hit menu key then select "back". Then hit menu key and select "key input". Enter the number 1. Wait a second. Then choose WB-AMR STATUS and see if it is on. I'm running custom ROM so those steps might be a little different than what you'll need to do to check
Click to expand...
Click to collapse
Same here running slimbean and don't know how to check on the custom ROM.
Sent from my SGH-M919 using xda app-developers app

Related

How to setup Verizon Wireless APN Settings for MMS

I can't believe this hasn't been stickied but this is how to apply the APN Settings to most ROM's that are Android 4.0+. Most ROM's have this information already baked in, some do not. I created this little tutorial not only for people that are new to this, but also for veterans who need a quick reference for the actual settings. Can we please get this Stickied?
APN Settings for MMS
1. Goto Settings
2. Under Wireless & Networks select "More..."
3. Select "Mobile networks"
4. Select "Access Point Names"
5. Press the Setting soft key
6. Select "New APN"
7. Select "Name" and enter "Verizon" and select "OK"
8. Select "APN" and enter "internet" and select "OK"
9. Select "MMSC" and enter "http://mms.vtext.com/servlets/mms" and select "OK"
10 . Press the setting softkey
11. Select "Save"
12. In the APN screen select your new "Verizon" APN
13. Finished
Yeah I'm surprised this hasn't been stickied yet. I can't tell you how many times I've seen this asked for.
+1 Mods, please make this a sticky! I'm always searching through threads to find this.
+ 2 cause it had already been + 1'd
Sent from my Incredibly Indecisive Dinc2
+3 (keep the combo going!)
+5!!!!! Screw 4
fen0m said:
+5!!!!! Screw 4
Click to expand...
Click to collapse
Noooooooooooooooooooooooooooooooo
Thanks!
Sent from my OG Droid
Yes my OG freaking Droid.
Thanks for this my man
Sent from my ADR6350 using xda premium
nitsua98 said:
+3 (keep the combo going!)
Click to expand...
Click to collapse
You tried...
fen0m said:
+5!!!!! Screw 4
Click to expand...
Click to collapse
Boooooo!
Sent from my Incredibly Indecisive Dinc2
Good stuff!
Thanks!! Im always looking for this fix!
Something else you may add to this, the method of updating towers when you can't use a keyboard. That might be handy also.
Sent from my Incredibly Indecisive Dinc2
Still trying to get this stickied, I guess the MODS have moved on to other devices and don't hang around here much anymore.....
PLZ sTiCkY !!!!!
uber information that needs to be seen =)
okay guys, I have tried doing this and it kicks me out of APN back to the settings page. Every time. I have switched to phablet mode to stock and everything in between to try and be able to enter these settings. Is there anyway possible to do this without getting into the APN?
drneely said:
okay guys, I have tried doing this and it kicks me out of APN back to the settings page. Every time. I have switched to phablet mode to stock and everything in between to try and be able to enter these settings. Is there anyway possible to do this without getting into the APN?
Click to expand...
Click to collapse
If you are looking for rom specific help you need to ask in that thread. I'm assuming you are trying pacman. I believe it has been addressed there already. But be sure you are hitting menu and save and not just backing out.
Sent from my Incredible 2 using xda app-developers app
It is for paranoid, i tried the way you suggested in that thread but even before i can get into apn settings i get kicked back to settings....
This is how it goes
1.hit menu
2.hit settings
3.click more
4.click wireless networks
5.click apn
6.get kicked back to main menu
Sent from my Incredible 2 using xda app-developers app
drneely said:
It is for paranoid, i tried the way you suggested in that thread but even before i can get into apn settings i get kicked back to settings....
This is how it goes
1.hit menu
2.hit settings
3.click more
4.click wireless networks
5.click apn
6.get kicked back to main menu
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
I believe someone mentioned a way to fix that. Something to do with clearing and rebooting maybe. Still this isn't the right thread for trouble shooting that rom. We don't want to clutter this thread with rom specific issues. Recheck that thread.
I'm on my way to work right now but it you don't find it ask in that thread and I will see if I can help later.
Sent from my Incredible 2 using xda app-developers app
drneely said:
It is for paranoid, i tried the way you suggested in that thread but even before i can get into apn settings i get kicked back to settings....
This is how it goes
1.hit menu
2.hit settings
3.click more
4.click wireless networks
5.click apn
6.get kicked back to main menu
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
Goto post #526 in Paranoid/Pac thread and start there. I personally never had that problem with PA, or PAC.....but I have gone back to Psycho's Build 4 because I don't like the apps baked into PA and PAC....

Turning Lte on and off

Is there any way to turn off Lte on stock att S3? I'm in a bad area where it switches from Lte and faux G constantly. Draining battery fast! Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
rayacer said:
Is there any way to turn off Lte on stock att S3? I'm in a bad area where it switches from Lte and faux G constantly. Draining battery fast! Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Edit: it's been too long since I've been on a stock ROM.
That doesn't help on AT&T based ROMs. That option would be removed
Sent from my SAMSUNG-SGH-I747 using xda premium
rayacer said:
Is there any way to turn off Lte on stock att S3? I'm in a bad area where it switches from Lte and faux G constantly. Draining battery fast! Thanks.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Your situation is exactly why AT&T is effing idiotic for removing the ability to disable LTE.
Sent from my SAMSUNG-SGH-I747
I'm on custom ROM and below procedure worked on mine (though I'm on LTE 100% of time).
I copied from some thread some time back
-----------
From the phone dialer enter: *#197328640#
Umts -> Debug Screen -> Phone Control -> Network Lock -> RAT_FREE_SUPPORITNG ON <- once you choose this option it will say "Now RAT Free Supporting" - this will allow you to change bands freely (no need to pull the SIM card) until your next reboot.
You can save *#197328640# in your contacts. I wasn't able to call the contact directly but from the dialer you can dial *#1 and it will pop up as a suggestion - you press that and it launches automatically. You can then go to Umts -> Debug Screen -> Phone Control -> Network Control <- this leads you to the screen you'd find in my original method with *#2263#
From here you can freely swap to whichever band you prefer and it will connect without a reboot required!
Note: After disabling RAT restrictions you can hit the menu button and choose back, twice. You'll then be at the menu list that includes "Network Control" aka *#2263# which is a little faster.
-----------
Sent from my SAMSUNG-SGH-I747 using xda premium
diablo009 said:
I'm on custom ROM and below procedure worked on mine (though I'm on LTE 100% of time).
I copied from some thread some time back
-----------
From the phone dialer enter: *#197328640#
Umts -> Debug Screen -> Phone Control -> Network Lock -> RAT_FREE_SUPPORITNG ON <- once you choose this option it will say "Now RAT Free Supporting" - this will allow you to change bands freely (no need to pull the SIM card) until your next reboot.
You can save *#197328640# in your contacts. I wasn't able to call the contact directly but from the dialer you can dial *#1 and it will pop up as a suggestion - you press that and it launches automatically. You can then go to Umts -> Debug Screen -> Phone Control -> Network Control <- this leads you to the screen you'd find in my original method with *#2263#
From here you can freely swap to whichever band you prefer and it will connect without a reboot required!
Note: After disabling RAT restrictions you can hit the menu button and choose back, twice. You'll then be at the menu list that includes "Network Control" aka *#2263# which is a little faster.
-----------
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
rayacer said:
Thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Did it work for you?
Sent from my SAMSUNG-SGH-I747 using xda premium
diablo009 said:
Did it work for you?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
It should. Has worked flawlessly for me without fail as well as multiple people I know.
aybarrap1 said:
It should. Has worked flawlessly for me without fail as well as multiple people I know.
Click to expand...
Click to collapse
Does it work on aosp Roms too?
Sent from my Nexus 7
phositadc said:
Does it work on aosp Roms too?
Sent from my Nexus 7
Click to expand...
Click to collapse
Apparently the answer is no. Just tried on slim bean. Can't figure out how to disable LTE on AOSP. Anybody know?
Sent from my SAMSUNG-SGH-I747
When I click on the "rat..." how do I change it
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 02:24 AM ---------- Previous post was at 02:13 AM ----------
trh1341 said:
When I click on the "rat..." how do I change it
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Just kidding..I got really confused..reread it like 3 times...good now
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 02:27 AM ---------- Previous post was at 02:24 AM ----------
But now, it constantly switches "3G" and H+ how can I stop it?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
phositadc said:
Does it work on aosp Roms too?
Sent from my Nexus 7
Click to expand...
Click to collapse
No. I tried on several myself just to verify (CM, AOKP, and a couple of others). It does work on AT&T stock ROM for certain though. It is the only thing that really keeps me from moving away completely from stock ROMS and/or other TW variants.
diablo009 said:
I'm on custom ROM and below procedure worked on mine (though I'm on LTE 100% of time).
I copied from some thread some time back
-----------
From the phone dialer enter: *#197328640#
Umts -> Debug Screen -> Phone Control -> Network Lock -> RAT_FREE_SUPPORITNG ON <- once you choose this option it will say "Now RAT Free Supporting" - this will allow you to change bands freely (no need to pull the SIM card) until your next reboot.
You can save *#197328640# in your contacts. I wasn't able to call the contact directly but from the dialer you can dial *#1 and it will pop up as a suggestion - you press that and it launches automatically. You can then go to Umts -> Debug Screen -> Phone Control -> Network Control <- this leads you to the screen you'd find in my original method with *#2263#
From here you can freely swap to whichever band you prefer and it will connect without a reboot required!
Note: After disabling RAT restrictions you can hit the menu button and choose back, twice. You'll then be at the menu list that includes "Network Control" aka *#2263# which is a little faster.
-----------
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I was reading on another post which talked about the Note 2 and when I come to that menu.. I got this "RAT FREE SUPPORTING on" as option 4 while the other post said it should say.. "[4] NW LOCK NV Data INNITIALLIZ"....
What have I done wrong??
Mine is a AT&T i317 Note 2, but shouldn't this menu be identical for all variance?
Hope you can advise.
Thanks.
Im with Bell and I dont have the "RAT_FREE_SUPPORITNG ON" option. Any alternative ?
Thanks.

App for switch between 2g ,3g,4g

Is there an app that allows you to switch between data soeeds.?
I try to manually do it in settings hut they never stick.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
bstylz911 said:
Is there an app that allows you to switch between data soeeds.?
I try to manually do it in settings hut they never stick.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Settings -> more -> Mobile Network -> Network Mode.
That works only on AOSP ROMs, not TW.
Sent from my SAMSUNG-SGH-I747 using xda premium
diablo009 said:
That works only on AOSP ROMs, not TW.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Good point. :good:
He didn't mention whether he was on TW or AOSP though.
BWolf56 said:
Settings -> more -> Mobile Network -> Network Mode.
Click to expand...
Click to collapse
ya doesnt work on tw
bstylz911 said:
ya doesnt work on tw
Click to expand...
Click to collapse
There you go. He is on TW.
Sent from my SAMSUNG-SGH-I747 using xda premium
bstylz911 said:
Is there an app that allows you to switch between data soeeds.?
I try to manually do it in settings hut they never stick.
Click to expand...
Click to collapse
bstylz911 said:
ya doesnt work on tw
Click to expand...
Click to collapse
Ok. Are you using the AT&T version of the SGS3? What settings are you doing manually and they are not sticking? Do you mean it does not change at all, switches automatically after certain amount of time, or resets after reboot or airplane mode? There is not an app that I know of that does this directly. Most are more or less shortcuts to your "mobile networks" in settings and the Test menu found under USSD "*#*#4636#*#*". I have not found one that works the way you mention for myself (regardless of which phone I use) unless it is baked into the ROM.
Copied from some post here n backed up on my drop box. This should work on TW ROMs.
-------------
From the phone dialer enter: *#197328640#
Umts -> Debug Screen -> Phone Control -> Network Lock -> RAT_FREE_SUPPORITNG ON <- once you choose this option it will say "Now RAT Free Supporting" - this will allow you to change bands freely (no need to pull the SIM card) until your next reboot.
You can save *#197328640# in your contacts. I wasn't able to call the contact directly but from the dialer you can dial *#1 and it will pop up as a suggestion - you press that and it launches automatically. You can then go to Umts -> Debug Screen -> Phone Control -> Network Control <- this leads you to the screen you'd find in my original method with *#2263#
From here you can freely swap to whichever band you prefer and it will connect without a reboot required!
Note: After disabling RAT restrictions you can hit the menu button and choose back, twice. You'll then be at the menu list that includes "Network Control" aka *#2263# which is a little faster.
Sent from my SAMSUNG-SGH-I747 using xda premium

increase volume mod

can anyone point me to such mod that will work on the optimus g pro?
Sent from my LG-E988 using xda premium
This has been talked about a lot, search, there are many options in the play store.
Sent from my LG-E980 using Tapatalk 2
what im looking for is not an app but something like this --> http://forum.xda-developers.com/showthread.php?t=1931970
i looked in the system/etc directory to look for a similar file that can be edited but didn't find anything..
Sent from my LG-E988 using xda premium
kikoexe said:
what im looking for is not an app but something like this --> http://forum.xda-developers.com/showthread.php?t=1931970
i looked in the system/etc directory to look for a similar file that can be edited but didn't find anything..
Sent from my LG-E988 using xda premium
Click to expand...
Click to collapse
Try This on your dialer type 3845#*980# then find "audio cal tool" and find "set gain" then look there for the sound values and you can change them for whatever you want. let me know if you got it.
im afraid that option is not in my unit.. i dialled 3845#*988# and these are the options that showed up (see the attahed image)..
i checked every option but was unable to find "audio cal tool"..
Sent from my LG-E988 using xda premium
kikoexe said:
im afraid that option is not in my unit.. i dialled 3845#*988# and these are the options that showed up (see the attahed image)..
i checked every option but was unable to find "audio cal tool"..
Sent from my LG-E988 using xda premium
Click to expand...
Click to collapse
check in "device test" "settings" if device test then look for "all auto test" or send me screenshots to know where you are at.
when i enter the device test option, there is an auto test option that is available and when i press it, it just shows a bunch of lists that doesnt do anything on the audio..
on the settings option however, there is an audio option and when i press it, a submenu appears and the first option says "sound calibration".. but when i press it, a toast notification appeared that says something like "test not implemented yet"..
Sent from my LG-E988 using xda premium
kikoexe said:
when i enter the device test option, there is an auto test option that is available and when i press it, it just shows a bunch of lists that doesnt do anything on the audio..
on the settings option however, there is an audio option and when i press it, a submenu appears and the first option says "sound calibration".. but when i press it, a toast notification appeared that says something like "test not implemented yet"..
Sent from my LG-E988 using xda premium
Click to expand...
Click to collapse
Yes the sound calibration is the one you need i don't have my G pro here but i can assure you thats the one setting i tweaked in my LG P880 and on this phone too to lower my volumes for speaker, bluetooth, headphones, earpiece and to increase them which i never did had a need to increase. about the test no implemented yet i have no clue..
Has anybody tried xposed mods on this phone yet?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Dnice25 said:
Has anybody tried xposed mods on this phone yet?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Check the CM 10.1 thread.. I think somebody mentioned there that xposed is working with the stock ROM...I think module was the halo notifications like PA
Sent from my LG-E980 using Tapatalk 4
Dnice25 said:
Has anybody tried xposed mods on this phone yet?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yep, I have four active modules now, AppSettings, XHaloFloating Window, Zoopa Circle battery and Advanced Power Menu, all of them working perfectly. I'm stock rooted.
Erik
ricco333 said:
Yep, I have four active modules now, AppSettings, XHaloFloating Window, Zoopa Circle battery and Advanced Power Menu, all of them working perfectly. I'm stock rooted.
Erik
Click to expand...
Click to collapse
hi can you share link for Advanced power menu Mod...thank you
kikoexe said:
when i enter the device test option, there is an auto test option that is available and when i press it, it just shows a bunch of lists that doesnt do anything on the audio..
on the settings option however, there is an audio option and when i press it, a submenu appears and the first option says "sound calibration".. but when i press it, a toast notification appeared that says something like "test not implemented yet"..
Sent from my LG-E988 using xda premium
Click to expand...
Click to collapse
Hi, man. Did you fixed this? I have the same problem right now and I'm desperate.

Secret menu on Note 4

Do I learned how to get into the secret menu on the Note 4.
Dial *#0011#
It will bring you to a cell service screen.
Then go:
Menu>back
Menu>key input> Q
Menu>key input> 0000
Wait a few seconds and it will take you to a list of a whole bunch of hidden settings and options.
Just an FYI.
***you can mess up things on your phone with these setting so be careful.
Sent from my SHIELD Tablet using XDA Free mobile app
http://forum.xda-developers.com/showthread.php?t=2919157
this doesn't work for att variant
raiu said:
this doesn't work for att variant
Click to expand...
Click to collapse
just tested, worked for me on an ATT Model
FateZero said:
just tested, worked for me on an ATT Model
Click to expand...
Click to collapse
weird, wont work on mine.
take that back it does
MUST BE CAPS! Q AND 4 ZEROS
This is already posted....
http://forum.xda-developers.com/note-4/general/enable-servicemenu-galaxy-note-4-hd-t2919157
How do you select the option to actually enable the HD voice? I get to the screen with the option "enable" and "disable", but just pressing on the option doesn't appear to do anything? Thanks
works on my at&t note4. here is what my menu looks like
meanhacker said:
works on my at&t note4. here is what my menu looks like
Click to expand...
Click to collapse
Yes once you hit the menu button and do the part with Q and 0000 you get to the actual main menu.
Sent from my SHIELD Tablet using XDA Free mobile app
ShrekOpher said:
Yes once you hit the menu button and do the part with Q and 0000 you get to the actual main menu.
Sent from my SHIELD Tablet using XDA Free mobile app
Click to expand...
Click to collapse
Q0, from the other thread, instead of Q then 0000 works as well.
work and HD voice too
I'm no dev but did anyone else notice the "secure boot status" setting in this ?
Ue settings & info> settings >system> secure boot status
Jspex said:
I'm no dev but did anyone else notice the "secure boot status" setting in this ?
Ue settings & info> settings >system> secure boot status
Click to expand...
Click to collapse
Yeah I saw that as well. Need to find a way to change it to (0,0) tried everything I could think of. Any time you try to edit it the seeing dump you back to the original *#0011# screen
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
hd voice
where is the option for hd voice in the settings of the secret menu?
ATT works fine.
Sent from my SAMSUNG-SM-N910A using Tapatalk
ShrekOpher said:
Yeah I saw that as well. Need to find a way to change it to (0,0) tried everything I could think of. Any time you try to edit it the seeing dump you back to the original *#0011# screen
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
Click to expand...
Click to collapse
1,0 is a disk designator not a enabled / disabled flag.
I did in fact mess my phones connectivity up after using this menu. I unknowingly changed something and it would not connect to my carrier so I couldn't send or receive calls or texts.
I fixed it by going back into the menu and rebuilding the NV in the HW Test section.
...
Any context to those pictures?
Can someone post a pic of hd voice work how the icons look like. I changed the setting but not sure if its working or not. Tia
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app

Categories

Resources