after installing radio update it vibrates three time and then nothing..
It's gotten into Qualcomm diagnostics mode.........you can search on XDA,there are many posts regarding this
Related
2 days ago i was playing with my touch diamond and it held when i switched on WIFI (wifi was working fone for a year now). When i rebooted the phone froze at the screen where Touch Diamond is written and at bottom right some info regarding ROM/Radio/SPL etc (R 1.09.25.23 G 52.51.25.26H D 2.03.00.00).
Tried many times but couldn't boot it . Just when i was about to get hopeless it started booting if i hold volume down, enter and press reset pin on the screen still taking too long. As i had stock HTC ROM so i upgraded it to the latest to see if it solves the problem. After upgrade phone would still boot randomly by trying the Reset pin and the mentioned button but after a few trys that also stopped working.
Now the phone is stuck on the same black screen, i can only resintall the latest Rom and All the way mentioned on the forums dont work for me i have tried signed unsiged soft and hard spl or direct Custom ROM upgrades but nothing goes beyond 0 %.
All the SPL upgrade articles require to copy jump spl. exe to the phone but i can do that as i am unable to create a Active Sync relationship (Eventhough i have tried upgrade by manually going into the tri color screen by holding volume down button while booting it).
The Hard Reset option allows me to hard reset but has no effect on the phone's condition.
anybody who could help me out here?
My friend has the toro(Verizon) variant of the Galaxy Nexus. One day it rebooted and barely can get past the nexus boot animation... and sort of bootloops. Sometimes after a battery pull it gets as far as the selecting english language screen but does not let me even press the button, and after a few seconds just reboots. I took the phone in order to try and help him revive it and during some processes with ODIN i now am stuck on the infamous {phone...yellow triangle...pc} screen. No other mode accessible, i'm positive of it. No download mode, no fastboot, nothing but the {phone...triangle...pc} screen. Some refer to this screen as a "soft brick" however, every method ive tried to remedy this that has worked for others has not worked. I have tried flashing the ODIN PDA and PHONE files. adb, and toolkit will not work because usb debugging is not accessible. However ODIN still recognizes the device. I've read about an OMAP flashing but i couldnt figure out how to go about doing this... BTW his phone was never rooted, just stock Android. Is there a possibility that this screen can show up due to a hardware failure?(motherboard, cpu, etc.)
Anyone have any ideas on how to fix this besides all the methods on the popular forums?
Okay, I have never had to create a thread for this kind of thing. I have always been able to solve these issues. This time around, I have ran out of ideas. I have been searching and searching Google, Xda and any other Android forum. I have seen multiple threads with this problem, some cases exactly like mine. Not one thread with this problem ends with a solution, they're all just dead ends. My HTC 10 started doing this a couple days ago after a notification popped up saying that I was using an incompatible charger after using a Samsung USB cable on a Quickcharge 3.0 car charger. 30 minutes later, my capacitive touch buttons were not responding. So, I just figured that I would reboot and everything would be fine. Now, my phone is stuck in a bootloop with no signs of recovery. The only thing it will boot into is the white bootloader screen. Trying to boot into recovery or download just throws it back into a bootloop. When its powered off and I put it on a charger, the charging animation will show for about 15 seconds then, back into a bootloop. Trying to use a RUU.exe doesnt work, just a message shows up saying that my phone is below 30% charge. The device will show up in fastboot devices when its in the bootloader but, its useless. Trying to flash anything in fastboot fails or does nothing. The bootloader doesnt recognize 2PS6IMG.zip in the sd card. I really need my phone for work and cant afford to wait for HTC to repair it, especially since Hurricane Harvey hit their repair center in Houston. I've taken out the Sd Card and sim to see that would help but nothing. I let it die completely and still nothing.
My bootloader screen shows
Status: Official
***Unlocked***
***S-OFF***
I have been running Viper 3.5.0 for awhile.
This is my last option to see if anyone else has got through this problem without sending it off.
Thank you
bmx4lfe said:
Okay, I have never had to create a thread for this kind of thing. I have always been able to solve these issues. This time around, I have ran out of ideas. I have been searching and searching Google, Xda and any other Android forum. I have seen multiple threads with this problem, some cases exactly like mine. Not one thread with this problem ends with a solution, they're all just dead ends. My HTC 10 started doing this a couple days ago after a notification popped up saying that I was using an incompatible charger after using a Samsung USB cable on a Quickcharge 3.0 car charger. 30 minutes later, my capacitive touch buttons were not responding. So, I just figured that I would reboot and everything would be fine. Now, my phone is stuck in a bootloop with no signs of recovery. The only thing it will boot into is the white bootloader screen. Trying to boot into recovery or download just throws it back into a bootloop. When its powered off and I put it on a charger, the charging animation will show for about 15 seconds then, back into a bootloop. Trying to use a RUU.exe doesnt work, just a message shows up saying that my phone is below 30% charge. The device will show up in fastboot devices when its in the bootloader but, its useless. Trying to flash anything in fastboot fails or does nothing. The bootloader doesnt recognize 2PS6IMG.zip in the sd card. I really need my phone for work and cant afford to wait for HTC to repair it, especially since Hurricane Harvey hit their repair center in Houston. I've taken out the Sd Card and sim to see that would help but nothing. I let it die completely and still nothing.
My bootloader screen shows
Status: Official
***Unlocked***
***S-OFF***
I have been running Viper 3.5.0 for awhile.
This is my last option to see if anyone else has got through this problem without sending it off.
Thank you
Click to expand...
Click to collapse
Hold down the power button and vol down until your phone reboots. It'll take 20 seconds or so, and the capacitive button lights should flash until it reboots.
That should take you to download mode where the RUU.zip on your SD can be flashed.
If that doesn't work, try power + vol up + vol down, then switching to power + vol down when the screen goes black. I think I remember having to do that once when I first got the 10 for a different problem, but it could have been a different device
I was trying to flash a LineageOS rom and I was at the last stage of the process which is flashing the OS. But it kept giving me an error which basically said that I had a different Ifwi version. I accidentally tried to flash a different TWRP version and now my phone doesnt boot. It's stuck in the asus logo. after couple minutes it just restarts. I cant access fastboot/recovery/TWRP or any of it. when I do VOLUME UP + POWER it just vibrates twice but nothing is coming up. I cant connect it to the pc too. What do I do?
Nobody help this guy????
kleeia1 said:
I was trying to flash a LineageOS rom and I was at the last stage of the process which is flashing the OS. But it kept giving me an error which basically said that I had a different Ifwi version. I accidentally tried to flash a different TWRP version and now my phone doesnt boot. It's stuck in the asus logo. after couple minutes it just restarts. I cant access fastboot/recovery/TWRP or any of it. when I do VOLUME UP + POWER it just vibrates twice but nothing is coming up. I cant connect it to the pc too. What do I do?
Click to expand...
Click to collapse
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Hi, I'm having a problem with my phone (C21Y RMX-3263) being stuck in bootlop after accidentally updating magisk via direct install option (has been rooted once already with patched boot img and spd tools). I figured I should just flash the old firmware but neither SPD research and upgrade tools work properly, for about 10-30 seconds all is going well, but then it just gets stuck on downloading, on different parts like super, or boot randomly alternating between attempts. I've left it on for about 4 hours and tried multiple times with no progress at all. There is nothing visible on the screen but holding the vol down button and plugging the cable in seems to initiate fastboot. I've tried using different versions of the tools and different firmwares for my model but nothing seems to work. The bootloop itself is very weird - the phone buzzes and the splash logo appears, afterwards starting to glitch out extremely eerily, the colors start to become weird, white lines dance on the display and after that it turns blank and flashes gray for a few seconds before turning off, looping and doing it all again. Pretty sure this isn't a hardware issue as the phone was working fine before. Assistance would be much appreciated
its dead
loardsudo said:
its dead
Click to expand...
Click to collapse
Thank you for your incredibly detailed and elaborately constructive reply