Develop Bugs

Best way to go from CM10 to rooted AT&T Jelly Bean ?

I am currently using CM10 on my rooted Galaxy S3 AT&T phone. Can someone tell me how I can get stock AT&T Jelly Bean with root access?

The root no flash count thread in development has been updated to rooted at&t jellybean. No data loss. Flash with Odin. It's what I did.

There are a lot of ways to do this. Flash the root injected file using odin. Flash the TW version using odin and use kies to update. you could try going right from CM10 to the JB update.
I was on rooted TW and I updated via Kies, then just flashed cwm, installed super user zip, and updated cwm to the latest version. Everything is working even google wallet following proper installation.

Tried to update 5 times fails on install

i have tried to update 5 times and in everytime download all the update and when phone reboots to install, once is installing says fail to update
i want to install AT&T OTA update to enable Multi-Window on Note II 4.1.2
im on original 4.1.1, not rooted phone
what can i do to update phone to a original 4.1.2, dont want to root or custom rom
thanx asap

wallyhenderson said:
i have tried to update 5 times and in everytime download all the update and when phone reboots to install, once is installing says fail to update
i want to install AT&T OTA update to enable Multi-Window on Note II 4.1.2
im on original 4.1.1, not rooted phone
what can i do to update phone to a original 4.1.2, dont want to root or custom rom
thanx asap
Click to expand...
Click to collapse
Should really be posted in q&a section. But do you have any apps disabled by any chance?
Sent from my Galaxy Note 2 running SkyNote5.0.1

wallyhenderson said:
i have tried to update 5 times and in everytime download all the update and when phone reboots to install, once is installing says fail to update
i want to install AT&T OTA update to enable Multi-Window on Note II 4.1.2
im on original 4.1.1, not rooted phone
what can i do to update phone to a original 4.1.2, dont want to root or custom rom
thanx asap
Click to expand...
Click to collapse
My best advice is ROOT, TWRP it, and install either CLEAN ROM or SKY NOTE if you want something close to the stock rom.
I am running the Clean Rom 1.0 SE ATT version right now and I love it.
I had the same problem with the OTA update and I said EFF AT&T and their broke update and just did it myself.
It took me about 2 hours to get my phone all customized and set up the way I want it again but it was well worth it.

jyazzie110 said:
Should really be posted in q&a section. But do you have any apps disabled by any chance?
Sent from my Galaxy Note 2 running SkyNote5.0.1
Click to expand...
Click to collapse
sorry didnt know will post on q&a

[Q] SGH-T889, Note II: How to download the latest OFFICIAL stock firmware

I have a Samsung Galaxy Note II for T-Mobile.
Model SGH-T889
I want to download the latest OFFICIAL firmware. I beleive its Jellybean 4.1.2 T889UVBMD1.
PROBLEM: My phone is rooted and won't take any over the air updates, nor accepts kyes to download it.
http://www.samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00052008&fm_seq=58267
So...I want to figure out a way to download it DIRECTLY into my computer/phone and use Mobile Odin.
I already tired:
http://forum.xda-developers.com/showthread.php?t=2102380
It does not work, not a stock rom, not signed, etc.
I want a 100% official/untampered firmware.

Sammobile. Com

+1 for sammobile

4.1.2 to 4.3 or not? t999v

Hey just wondering if I should do the update to stock 4.3 OTA or not. I've been looking at the root66 knox free 4.3 and it sounds good. Any Issues with it? or stock OTA? I've read mixed reviews, and am now confused. Also if I do install root66 on this wind t999v, am I required to install the stock OTA 4.3 update for it to work? Or am I in a better situation if I just install it from 4.1.2? Also any basic instructions on what I would have to do to install root66 would be much appriciated. I'm technologically inclined, just been out of the cellphone moding scene for quite some time, and just want to ask before I start asking how to unbrick. Thanks in advance.:good:

Knox Free Root 66 is always preferred over Stock update. The instructions and all the necessary files are in the Root66 Thread.
In short you need Odin v 3.xx Need to have the Drivers installed for your phone. Make sure Kies is not installed on your PC. Put your phone in Download mode and then connect to pc. Flash the Root66 file and you are done. There are several tutorials on Youtube for how to use Odin.
Note - For your Knowledge, please read on the 4.3 and its locked bootloader.

The root66 works fine on the wind phone and disables knox. it doesn't trip the flash counter so warranty is still intact if you had to flash back to a knox-rom. once you get into custom roms', the flash counter gets tripped though.
i just installed the 4.4.2 likewise rom, and it is smoooooooth. lol. it's not official though.

Perseus71 said:
Kox Free Root 66 is always preferred over Stock update. The instructions and all the necessary files are in the Root66 Thread.
In short you need Odin v 3.xx Need to have the Drivers installed for your phone. Make sure Kies is not installed on your PC. Put your phone in Download mode and then connect to pc. Flash the Root66 file and you are done. There are several tutorials on Youtube for how to use Odin.
Note - For your Knowledge, please read on the 4.3 and its locked bootloader.
Click to expand...
Click to collapse
How do I know which wind pre-installed root firmware to install:
WIND Image
December 2013 - 4.3 JellyBean
Note: This is based off of the stock image GLW T999VVLUEMK5
Download :: Download - root66_GLW_T999VVLUEMK5.7z
June 2013 - 4.1.2 JellyBean
Note: This is based off of the stock image GLW T999VVLDMF2
Perm Mirror: Download - root66_GLW_T999VVLDMF2.7z
December 2012 - 4.1.1 JellyBean
Note: This is based off of the stock image GLW T999VVLDLL1
Perm Mirror: Download - root66_GLW_T999VVLDLL1.7z
my s3 is on 4.1.2 so do I download that one or is that the firmware that will be newly installed? I want 4.3 newly installed.

Please flash root66_GLW_T999VVLUEMK5.7z

Also on http://forum.xda-developers.com/showthread.php?t=1949687 they have 4 files, sorry for all the questions
Wind_VLUEMK5
Updated JB Firmware
Wind_VLDMF2
Updated JB Firmware
Wind_VLDLL1
Updated JB Firmware
Wind_VLALH2
Updated ICS Firmware

Perseus71 said:
Please flash root66_GLW_T999VVLUEMK5.7z
Click to expand...
Click to collapse
Even if my current s3 firmware is 4.1.2 baseband t999vvldmf2 ?

Yes that's fine. It will update your Bootloader.

upgrade not good
kreso3k said:
Hey just wondering if I should do the update to stock 4.3 OTA or not. I've been looking at the root66 knox free 4.3 and it sounds good. Any Issues with it? or stock OTA? I've read mixed reviews, and am now confused. Also if I do install root66 on this wind t999v, am I required to install the stock OTA 4.3 update for it to work? Or am I in a better situation if I just install it from 4.1.2? Also any basic instructions on what I would have to do to install root66 would be much appriciated. I'm technologically inclined, just been out of the cellphone moding scene for quite some time, and just want to ask before I start asking how to unbrick. Thanks in advance.:good:
Click to expand...
Click to collapse
i want to downgrade, but cannot find any way to downgrade.

welcome2you said:
i want to downgrade, but cannot find any way to downgrade.
Click to expand...
Click to collapse
because you cannot downgrade from 4.3 firmware.

Note 2 update to stock KitKat

Hi!
I have Galaxy Note 2 (N7100) running on stock 4.1.2 ROM and I want to update it to stock 4.4 ROM. Is it possible to update directly from 4.1 to 4.4 using Odin? Or maybe I should update it to 4.3 and then to 4.4? Which version of Odin should I use? 3.09 would be ok?
Any tips or things that I should be careful of?

Michal Z. said:
Hi!
I have Galaxy Note 2 (N7100) running on stock 4.1.2 ROM and I want to update it to stock 4.4 ROM. Is it possible to update directly from 4.1 to 4.4 using Odin? Or maybe I should update it to 4.3 and then to 4.4? Which version of Odin should I use? 3.09 would be ok?
Any tips or things that I should be careful of?
Click to expand...
Click to collapse
Method 1st: (ideally u shud use this method)
If you are not rooted, you should use phone software update to upgrade to 4.4.2.
If you are rooted, you will have to use triangleaway to reset flash counter and use supersu to fully unroot. Then upgrade using software update in phone.
Method 2nd:
3.09 is best Odin version to use. Just download the stock rom, dump it in AP tab and flash. Done.
Press thumps up if you found this suggestion helpful.
Sent from my GT-N7100 using Tapatalk

ceomaverick said:
Method 1st: (ideally u shud use this method)
If you are not rooted, you should use phone software update to upgrade to 4.4.2.
If you are rooted, you will have to use triangleaway to reset flash counter and use supersu to fully unroot. Then upgrade using software update in phone.
Method 2nd:
3.09 is best Odin version to use. Just download the stock rom, dump it in AP tab and flash. Done.
Press thumps up if you found this suggestion helpful.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
I'm not rooted and running stock 4.1.2 but somehow OTA update in phone does not work. I'm pressing to check for updates and nothing happens at all (tried many times, restarting phone etc). So I want to do it using Odin. OK Odin v3.09 but what about version? Do I need to flash 4.3 first and then 4.4? Or can I flash 4.4 at once?

Michal Z. said:
I'm not rooted and running stock 4.1.2 but somehow OTA update in phone does not work. I'm pressing to check for updates and nothing happens at all (tried many times, restarting phone etc). So I want to do it using Odin. OK Odin v3.09 but what about version? Do I need to flash 4.3 first and then 4.4? Or can I flash 4.4 at once?
Click to expand...
Click to collapse
No need to flash 4.3.
First things first. Just make EFS backup using Dr.Ketan's Multitool. Transfer it to PC or cloud for safe keeping.
To upgrade you have 2 options:
1. PC ODIN 3.09 --> Download 4.4.2 firmware for your region from sammobile or samsung-updates and flash with Odin as explained earlier.
Note that you cannot downgrade the 4.4.2 bootloader, ever.
2. Mobile ODIN PRO --> To use this you need to be rooted. Once rooted download the apk file from play store and flash your 4.4.2 firmware. This will keep the bootloader as it is but will flash everything else.
Note: You won't be able to charge the battery when the phone is off. And you may face wifi problem due to old bootloader. If you face these problems, you have no choice but to use pc odin.
Press thumps up if you found this suggestion helpful.
Sent from my GT-N7100 using Tapatalk