Hey just wondering if I should do the update to stock 4.3 OTA or not. I've been looking at the root66 knox free 4.3 and it sounds good. Any Issues with it? or stock OTA? I've read mixed reviews, and am now confused. Also if I do install root66 on this wind t999v, am I required to install the stock OTA 4.3 update for it to work? Or am I in a better situation if I just install it from 4.1.2? Also any basic instructions on what I would have to do to install root66 would be much appriciated. I'm technologically inclined, just been out of the cellphone moding scene for quite some time, and just want to ask before I start asking how to unbrick. Thanks in advance.:good:
Knox Free Root 66 is always preferred over Stock update. The instructions and all the necessary files are in the Root66 Thread.
In short you need Odin v 3.xx Need to have the Drivers installed for your phone. Make sure Kies is not installed on your PC. Put your phone in Download mode and then connect to pc. Flash the Root66 file and you are done. There are several tutorials on Youtube for how to use Odin.
Note - For your Knowledge, please read on the 4.3 and its locked bootloader.
The root66 works fine on the wind phone and disables knox. it doesn't trip the flash counter so warranty is still intact if you had to flash back to a knox-rom. once you get into custom roms', the flash counter gets tripped though.
i just installed the 4.4.2 likewise rom, and it is smoooooooth. lol. it's not official though.
Perseus71 said:
Kox Free Root 66 is always preferred over Stock update. The instructions and all the necessary files are in the Root66 Thread.
In short you need Odin v 3.xx Need to have the Drivers installed for your phone. Make sure Kies is not installed on your PC. Put your phone in Download mode and then connect to pc. Flash the Root66 file and you are done. There are several tutorials on Youtube for how to use Odin.
Note - For your Knowledge, please read on the 4.3 and its locked bootloader.
Click to expand...
Click to collapse
How do I know which wind pre-installed root firmware to install:
WIND Image
December 2013 - 4.3 JellyBean
Note: This is based off of the stock image GLW T999VVLUEMK5
Download :: Download - root66_GLW_T999VVLUEMK5.7z
June 2013 - 4.1.2 JellyBean
Note: This is based off of the stock image GLW T999VVLDMF2
Perm Mirror: Download - root66_GLW_T999VVLDMF2.7z
December 2012 - 4.1.1 JellyBean
Note: This is based off of the stock image GLW T999VVLDLL1
Perm Mirror: Download - root66_GLW_T999VVLDLL1.7z
my s3 is on 4.1.2 so do I download that one or is that the firmware that will be newly installed? I want 4.3 newly installed.
Please flash root66_GLW_T999VVLUEMK5.7z
Also on http://forum.xda-developers.com/showthread.php?t=1949687 they have 4 files, sorry for all the questions
Wind_VLUEMK5
Updated JB Firmware
Wind_VLDMF2
Updated JB Firmware
Wind_VLDLL1
Updated JB Firmware
Wind_VLALH2
Updated ICS Firmware
Perseus71 said:
Please flash root66_GLW_T999VVLUEMK5.7z
Click to expand...
Click to collapse
Even if my current s3 firmware is 4.1.2 baseband t999vvldmf2 ?
Yes that's fine. It will update your Bootloader.
upgrade not good
kreso3k said:
Hey just wondering if I should do the update to stock 4.3 OTA or not. I've been looking at the root66 knox free 4.3 and it sounds good. Any Issues with it? or stock OTA? I've read mixed reviews, and am now confused. Also if I do install root66 on this wind t999v, am I required to install the stock OTA 4.3 update for it to work? Or am I in a better situation if I just install it from 4.1.2? Also any basic instructions on what I would have to do to install root66 would be much appriciated. I'm technologically inclined, just been out of the cellphone moding scene for quite some time, and just want to ask before I start asking how to unbrick. Thanks in advance.:good:
Click to expand...
Click to collapse
i want to downgrade, but cannot find any way to downgrade.
welcome2you said:
i want to downgrade, but cannot find any way to downgrade.
Click to expand...
Click to collapse
because you cannot downgrade from 4.3 firmware.
Related
If already rooted the stock ROM on a new TMo S3 with the first ODIN-based solution posted (CM recovery), can I use the ROM manager to update the newly released TMo update via stock ODIN flashable ROM with root injected into the system image - TMO T999UVALH2, without having to go through all the steps with ODIN, ...
If the ROM manager is not to be used for root66_TMO_T999UVALH2.tar, then are the steps provided in the link above still useable, even for previously rooted S3?
[OT] After having rooted the phone, checking the flash counter I found it to be 3. Any idea why?
Root66 version is a tar file so u have to update via Odin. Also u need to be on stock recovery not cwm.
sarni84 said:
Root66 version is a tar file so u have to update via Odin. Also u need to be on stock recovery not cwm.
Click to expand...
Click to collapse
... thanks. Would this work?
That's older firmware UVALH2 is the newest "ROOT66 tar" package is the one u want it is the newest and best.
sarni84 said:
That's older firmware UVALH2 is the newest "ROOT66 tar" package is the one u want it is the newest and best.
Click to expand...
Click to collapse
Thank you for the follow-up. Although I am done with the upgrade via the easiest path: Kies to be able to install the latest official OTA-released -> then re-root using the original link I sent, I am a little confused about your last statement: the root66 I have is inclusive of the UVALH2, which is the latest official version, in my understanding. I found a reference to an UVALH3 (supposedly JB related), but that is not what Samsung / TMo delivered OTA lately, and I don't think that's what you meant?!?
Hi Guys,
Here is a breakdown of the facts:
I have a SGH-I747 (Canadian version)
I wanted to unlock it so I downgraded and installed 4.1.1 (I747MUMLL1)
After, I realized that the 4.1.1 is outdated and don't like the layout...etc.
Now, I want to go back to 4.2.1 or 4.3.
What are the steps to install 4.2.1 or 4.3 ?
Do I have to root the phone before installing anything?
Any help would be appreciated.
Thanks
either Odin to 4.3 or check system update in setting
sent from my mobile device
downgrade?
team_hob said:
Hi Guys,
Here is a breakdown of the facts:
I have a SGH-I747 (Canadian version)
I wanted to unlock it so I downgraded and installed 4.1.1 (I747MUMLL1)
After, I realized that the 4.1.1 is outdated and don't like the layout...etc.
Now, I want to go back to 4.2.1 or 4.3.
What are the steps to install 4.2.1 or 4.3 ?
Do I have to root the phone before installing anything?
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
How did you downgrade?
...i've been looking around a a way to unlock on 4.3 but most info is for 4.1.1 and 4.1.2, do you remember how you did it?
rx15901 said:
How did you downgrade?
...i've been looking around a a way to unlock on 4.3 but most info is for 4.1.1 and 4.1.2, do you remember how you did it?
Click to expand...
Click to collapse
You cannot downgrade the bootloader, only the ROM.
It has been theorized that downgrading the ROM to 4.1.1 and keeping the 4.3 bootloader would give you the necessary options to unlock the phone using the free method, but no one has posted the results of doing this.
I couldn't find a ROM matching MUMLL1 but many ROMs are located here: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=BMC#firmware
SaHiLzZ said:
either Odin to 4.3 or check system update in setting
sent from my mobile device
Click to expand...
Click to collapse
Do you where I can download 4.3? Does it matter on the cellphone provider?
System update doesn't work...its say's system is up-to-date.
team_hob said:
Do you where I can download 4.3? Does it matter on the cellphone provider?
System update doesn't work...its say's system is up-to-date.
Click to expand...
Click to collapse
Look on samfirmware.com for stock ROMs for your carrier. The firmware must be flashed via desktop Odin.
audit13 said:
You cannot downgrade the bootloader, only the ROM.
It has been theorized that downgrading the ROM to 4.1.1 and keeping the 4.3 bootloader would give you the necessary options to unlock the phone using the free method, but no one has posted the results of doing this.
I couldn't find a ROM matching MUMLL1 but many ROMs are located here: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=BMC#firmware
Click to expand...
Click to collapse
I read in one of these threads that flashing via Mobile Odin, rather than desktop Odin, will flash the ROM but not the bootloader. Can anyone confirm if it is possible to safely downgrade from 4.3 to 4.1.1 via this method?
audit13 said:
Look on samfirmware.com for stock ROMs for your carrier. The firmware must be flashed via desktop Odin.
Click to expand...
Click to collapse
I have downloaded lastest firmware for Telus from Sammobile.
Should I just use odin and install the new firmware? Do I need to do something to the ROM before I install the firmware? I'm a newbie to flashing so all the help would be help.
Thanks
team_hob said:
I have downloaded lastest firmware for Telus from Sammobile.
Should I just use odin and install the new firmware? Do I need to do something to the ROM before I install the firmware? I'm a newbie to flashing so all the help would be help.
Thanks
Click to expand...
Click to collapse
If you are using an i747m, you can use Odin to flash the firmware.
I have a rooted note 3 t-mobile phone, I wanted to upgrade to kitkat or any newer software available, but I have no clue how to do it without loosing the root.
Model number
SM-N9OOT
Android version 4.3
Kernel ver
3.4.0-1670611
Is it necessary to upgrade?
Thanks.
re: root
midomi333 said:
I have a rooted note 3 t-mobile phone, I wanted to upgrade to kitkat or any newer software available, but I have no clue how to do it without loosing the root.
Model number
SM-N9OOT
Android version 4.3
Kernel ver
3.4.0-1670611
Is it necessary to upgrade?
Thanks.
Click to expand...
Click to collapse
What's the big deal about re-rooting the phone, it only takes about 10 seconds?
Here is the direct download link for the latest odin flash official N900T NF4 firmware:
http://www.mediafire.com/download/f...VUDNF4_N900TTMBDNF4_N900TUVUDNF4_HOME.tar.md5
Here is the odin flash direct download link for cf-autoroot:
https://dl.dropboxusercontent.com/u/45687485/CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5
Good luck!
Misterjunky said:
What's the big deal about re-rooting the phone, it only takes about 10 seconds?
Here is the direct download link for the latest odin flash official N900T NF4 firmware:
http://www.mediafire.com/download/f...VUDNF4_N900TTMBDNF4_N900TUVUDNF4_HOME.tar.md5
Here is the odin flash direct download link for cf-autoroot:
https://dl.dropboxusercontent.com/u/45687485/CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5
Good luck!
Click to expand...
Click to collapse
You're welcome for the firmware link.
Also, seeing as he's on 4.3, perhaps he doesn't want to trip knox, which your bullish statement will do.
I asked you nicely in pm to link to my thread instead of stealing my links, but since you ignored that, be prepared to have me comment on your posts where you try to pass them off as your own, or at least fail to attribute.
I appreciate that you want to help others, but please attribute links and/our abide by the posters requests when they ask you.
Thanks
Sent from my leanKernel 3.4 powered stock 4.4.2 (NF4) SM-N900T
I always have trouble in rooting the phone, I just got lucky this time d: I even reset my phone to factory a few times before I got my phone rooted.
re: rooting
midomi333 said:
I always have trouble in rooting the phone, I just got lucky this time d: I even reset my phone to factory a few times before I got my phone rooted.
Click to expand...
Click to collapse
That's strange, I never did have any issues when rooting or re-rooting
my phone. Usually when I see someone having problems rooting it's
usually caused by not using the time-tested method of odin flashing the
correct and latest version of cf-autoroot designed for the N900T.
Good luck!
Follow the directions from Effortless. And get the free version of Triangle Away (link in OP). It's "effortless".
http://forum.xda-developers.com/showthread.php?t=2765014
midomi333 said:
I have a rooted note 3 t-mobile phone, I wanted to upgrade to kitkat or any newer software available, but I have no clue how to do it without loosing the root.
Model number
SM-N9OOT
Android version 4.3
Kernel ver
3.4.0-1670611
Is it necessary to upgrade?
Thanks.
Click to expand...
Click to collapse
Is it necessary to upgrade? IMO not really unless you care about VoLTE and Download booster. In that case here's what I would do to upgrade and retain root and knox 0x0:
Download ne6 firmware from link below
http://forum.xda-developers.com/showthread.php?t=2769856
Followed this instruction below to update from 4.3 MI7 to 4.4.2 ne6 and ne6 bootloader and keep root and not trip knox. OR if I'm not mistaken, you can just flash ne6 rom and bootloader via PC odin without tripping knox since they are stock firmware and bootloader. Then root with www.towelroot.com.
http://forum.xda-developers.com/showpost.php?p=53016778&postcount=9
After you update to ne6 with root, f you wanna keep going and update to latest nf4 then go to the thread below, and download nf4 firmware, bootloader, and MODEM+NON-HLOS. Follow step 2 on how to update to nf4 and retain root
http://forum.xda-developers.com/not...900tuvudnf4-extracted-stock-firmware-t2834398
If you care about working wifi calling then follow instruction below instead of step 2.
http://forum.xda-developers.com/showpost.php?p=54621389&postcount=86
Good luck!
[Q&A] [Firmware/OTA's] [root66] SGH-T999(All Variants!) Official & Root66 FW & OTA U
Q&A for [Firmware/OTA's] [root66] SGH-T999(All Variants!) Official & Root66 FW & OTA Updates!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Firmware/OTA's] [root66] SGH-T999(All Variants!) Official & Root66 FW & OTA Updates!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can I flash the root666 T999_UVUEMJC (or even the stock) firmware on top of stock T999_UVUENC2 without bricking the phone? I got the latest T999_UVUENC2 OTA update and my wifi won't work anymore . Any help would be appreciated. Thanks
GS3 t999l T999LUVUBNF4 update TowelRoot
hi just unrooted my GS3 and updated via kies to T999LUVUBNF4, went back to towelroot and it says phone is not supported. Does anyone know another quick way to root? Also is anyone else using this update and can tell me how its behaving. appreciate the info
gs3goodtome said:
hi just unrooted my GS3 and updated via kies to T999LUVUBNF4, went back to towelroot and it says phone is not supported. Does anyone know another quick way to root? Also is anyone else using this update and can tell me how its behaving. appreciate the info
Click to expand...
Click to collapse
cf-auto root, or flash SuperSU with custom recovery.
T999LUVUBNF4 Root
Hey, I've been trying to root my S3 running the T999LUVUBNF4 firmware, but I'm having trouble. Towelroot doesn't support it, I haven't seen anything about a Root66, and I've heard mixed reports on CF-auto root. Does anyone know if there is a workable solution yet? How would I go about flashing SuperSU? Thanks.
Okay I've recently just flashed the root66 firmware that gave me supersu and all that.
My question is... Where do i go from here?
How would i proceed to
1) Install TWRP?, which version as well? Is 2.8 d2tmo fine? Can i have some instructions whether i use TWRP manager(goomanager doesn't seem to exist anymore) or do i have to go into download and flash through odin 3.09?
2) Installing a custom rom? I want to install Paranoid Android 4.6 beta 5 for D2lte but i'm not sure how to go about it. I have already downloaded the rom itself but not sure how to proceed from here. Also, how would i get the working and latest version of Gapps? (Also, can you tell me how to install Cyanogenmod 11 for d2lte as well?)
3) What are some cool apps to get?
4) Which root apps/roms/softwares will brick my phone? I'm never sure which thing will work and which won't.
5) how do i install xposed?
6) How do i remove all the bloatware? and how would i got about flashing through my phone without using the computer? is mobile odin compatible with my phone?
My phone is the SGH-T999L and i have no idea if i have a locked bootloader and how i would go about and bypass the limitations of this locked bootloader
rocket540 said:
Hey, I've been trying to root my S3 running the T999LUVUBNF4 firmware, but I'm having trouble. Towelroot doesn't support it, I haven't seen anything about a Root66, and I've heard mixed reports on CF-auto root. Does anyone know if there is a workable solution yet? How would I go about flashing SuperSU? Thanks.
Click to expand...
Click to collapse
Did you read my post above yours?
IceHism said:
Okay I've recently just flashed the root66 firmware that gave me supersu and all that.
My question is... Where do i go from here?
How would i proceed to
1) Install TWRP?, which version as well? Is 2.8 d2tmo fine? Can i have some instructions whether i use TWRP manager(goomanager doesn't seem to exist anymore) or do i have to go into download and flash through odin 3.09?
2) Installing a custom rom? I want to install Paranoid Android 4.6 beta 5 for D2lte but i'm not sure how to go about it. I have already downloaded the rom itself but not sure how to proceed from here. Also, how would i get the working and latest version of Gapps? (Also, can you tell me how to install Cyanogenmod 11 for d2lte as well?)
3) What are some cool apps to get?
4) Which root apps/roms/softwares will brick my phone? I'm never sure which thing will work and which won't.
5) how do i install xposed?
6) How do i remove all the bloatware? and how would i got about flashing through my phone without using the computer? is mobile odin compatible with my phone?
My phone is the SGH-T999L and i have no idea if i have a locked bootloader and how i would go about and bypass the limitations of this locked bootloader
Click to expand...
Click to collapse
Please don't post the same thing on multiple threads. Not being rude but it doesn't help at all
Rooting SGH-T99L with T999LUVUBNF4
I've read most of the more recent posts, and it is still unclear to me how to root my T999L which is already on the T999LUVUBNF4 baseband and build. I've seen references to cf-auto-root (like serio22 above), but the T999 (which I believe works for T999L) is based on T999UVALEM, which is 4.0.4 ICS. I certainly don't want to downgrade that far. The latest firmware on the first page of this Root66 thread is T999L_UVUBNC1, and there was a post indicating better reception with the newer modem, so I'd rather not downgrade that either. If I flash T999L_UVUBNC1 will my baseband remain intact (BNF4)? Or should I wait for a pre-rooted T999L_UVUBNF4? Or is there a better way altogether to root my T999L/BNF4?
Also, for other n00bs reading this, it's pretty clear that towelroot doesn't work on BNF4.
Thanks!!
I need some help repairing my imei
I'm on the t999
nc2 radio
on a t mobile based rom 4.3
Stock root image for Baseband ver
IM TRYING TO FIND OUT HOW TO ROOT MY s3, A baseband version of SGL99L t mobile samsung s3 T999LUVUBNF4, what file do i want?
Best root and 4.4 rom for NF4 t999L
Did you find one DKARMANN?
@DocHoliday77 is there any root66 for UVUBNF4? I tried searching everywhere in the forums and I can't seem to find anything.
android_noob12 said:
@DocHoliday77 is there any root66 for UVUBNF4? I tried searching everywhere in the forums and I can't seem to find anything.
Click to expand...
Click to collapse
not root66 , but did you read post #4?
mrrocketdog said:
not root66 , but did you read post #4?
Click to expand...
Click to collapse
See post #8, re cf-root and downgrading.
rooted Windmobile 4.4.4
anyone have 4.4.? for wind mobile what ever is the new one stock that is rooted ?
I tried flashing UVDLJC - UVDMD5 (latest OTA update) using Multiboot Recovery v2.2 - (twrp2.8.3.0)
When flashing directly onto blank partition, I got some error about missing build.prop, and so decided to try flashing on top of stock ROM.
Stock I have installed as Flash PureStock Rom + Secure UVAMB7 Kernel (from http://forum.xda-developers.com/showpost.php?p=43772060&postcount=3) -- again, in multiboot -- and tried installing OTA on top of that. Got "error executing updater binary in zip"
What am I doing wrong?
Thanks
slimkat v9 to stock tw
Please help me. I have a sgh-t999. I want to know is it safe to install stock tw t999_uvuenc2. I'm currently running slimkat v9. My baseband is t999uvuenc2 and my android version is 4.4.4 i really want my s3 to revert back to stock. Ive been asking to the roms posted in this unit if it safe to direct flash but i havent got a good advice. I really want the stock touchwiz. Pls help me.
Which firmware to use
After I un-bricked my SGH-T999 with the debrick image sdcard ( YAYYY), I was able to boot with the stock 4.3 rom again.
I reflash the root66 4.3 firmware hoping it could get the correct boot image back in place. However it got stuck at the Samsung logo.
So I went into stock recovery and did a wipe/factory reset. Now I can still boot with the debrick sdcard but I am back in JellyBean (4.1.2 T999UVDMD5).
Which firmware should I flash 4.3 or 4.1.2? And did I miraculously downgraded my firmware ( I thought it wasn't possible) ?
iam.alucard said:
Please help me. I have a sgh-t999. I want to know is it safe to install stock tw t999_uvuenc2. I'm currently running slimkat v9. My baseband is t999uvuenc2 and my android version is 4.4.4 i really want my s3 to revert back to stock. Ive been asking to the roms posted in this unit if it safe to direct flash but i havent got a good advice. I really want the stock touchwiz. Pls help me.
Click to expand...
Click to collapse
Late, but yes you can, you'll have to factory reset
pancakemiz said:
After I un-bricked my SGH-T999 with the debrick image sdcard ( YAYYY), I was able to boot with the stock 4.3 rom again.
I reflash the root66 4.3 firmware hoping it could get the correct boot image back in place. However it got stuck at the Samsung logo.
So I went into stock recovery and did a wipe/factory reset. Now I can still boot with the debrick sdcard but I am back in JellyBean (4.1.2 T999UVDMD5).
Which firmware should I flash 4.3 or 4.1.2? And did I miraculously downgraded my firmware ( I thought it wasn't possible) ?
Click to expand...
Click to collapse
What does download mode display?
Unsure which firmware to use
serio22 said:
What does download mode display?
Click to expand...
Click to collapse
Odin Mode
Product Name: SGH-T999
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Qualcomm Secureboot: Enable
Warranty Bit: 1
Bootloader AP SWAEV: 1
Am I correct that if the root66 firmware had installed correctly, it should read:
Custom Binary Download: Yes
Current Binary: Custom
Click to expand...
Click to collapse
.
Hello people, first of all I dont know if im in the right place, Im new to this forum.
My situation is that I want to restore back to stock ROM my i747 with a custom rom running on android 4.4.4 with SlimROM, my Kernel is 3.4.104-cyanogenmod-g38a4e52
Baseband i747UCUEMJB
I passed through 4.3 stock ROM, then i flashed to Cyanogen 12 with android 5.1.1 and now Im with SlimKat with android 4.4.4. I want to go back to stock ROM, but I read about the locked bootloader on newer versions of android, I dont really know much about this thing, but I think that is if I want to go back to 4.1, im i right
The thing is, can I go back to 4.3 stock rom
Thank you.
The bootloader is not locked; however, it cannot be downgraded to anything before 4.3.
Look here for items related to the i747: http://forum.xda-developers.com/showthread.php?t=1725839
Look here to flash stock 4.4.2 via Odin: http://forum.xda-developers.com/gal...ile-sgh-i747ucufne4v4-4-2attall-odin-t3305899
audit13 said:
The bootloader is not locked; however, it cannot be downgraded to anything before 4.3.
Look here for items related to the i747: http://forum.xda-developers.com/showthread.php?t=1725839
Look here to flash stock 4.4.2 via Odin: http://forum.xda-developers.com/gal...ile-sgh-i747ucufne4v4-4-2attall-odin-t3305899
Click to expand...
Click to collapse
If you want the Stock Odin MJB 4.3 file, and can't locate it, let me know and I'll upload it.
I don't need the files as I never had an i747 but I used to have the i747m.
The op may need them though.
audit13 said:
The bootloader is not locked; however, it cannot be downgraded to anything before 4.3.
Look here for items related to the i747: http://forum.xda-developers.com/showthread.php?t=1725839
Look here to flash stock 4.4.2 via Odin: http://forum.xda-developers.com/gal...ile-sgh-i747ucufne4v4-4-2attall-odin-t3305899
Click to expand...
Click to collapse
audit13 said:
I don't need the files as the never had an i747 but I used to have the i747m.
The op may need them though.
Click to expand...
Click to collapse
Quoted the wrong post, sorry about that.
No worries, we're all here to help each other.
Stock MJB 4.3 Odin File: (Google Drive Link)
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5
https://drive.google.com/file/d/0B0lfMZeSyJnYZ1cwcmUtZmp4NU0/view?usp=drivesdk
Stock NE4 4.4.2 Odin Files: (Google Drive Links)
AP_I747UCUFNE4_1514807_REV04_user_low_ship.tar.md5
https://drive.google.com/file/d/0B0lfMZeSyJnYQlRqY2VmUXh4Zk0/view?usp=drivesdk
BL_I747UCUFNE4_1514807_REV04_user_low_ship.tar.md5
https://drive.google.com/file/d/0B0lfMZeSyJnYbGRMNGRLQnFlLTg/view?usp=drivesdk
CP_I747UCUFNE4_1514807_REV04_user_low_ship.tar.md5
https://drive.google.com/file/d/0B0lfMZeSyJnYeE12YmltNmJWbG8/view?usp=drivesdk
CSC_16G_ATT_I747ATTFNE4_1514807_REV04_user_low_ship.tar.md5
https://drive.google.com/file/d/0B0lfMZeSyJnYemotYmd3VXI4eGs/view?usp=drivesdk
audit13 said:
The bootloader is not locked; however, it cannot be downgraded to anything before 4.3.
Look here for items related to the i747: http://forum.xda-developers.com/showthread.php?t=1725839
Look here to flash stock 4.4.2 via Odin: http://forum.xda-developers.com/gal...ile-sgh-i747ucufne4v4-4-2attall-odin-t3305899
Click to expand...
Click to collapse
Chuckles5150 said:
Stock MJB 4.3 Odin File: (Google Drive Link)
I747UCUEMJB_2024954_REV04_user_low_ship.tar.md5
https://drive.google.com/file/d/0B0lfMZeSyJnYZ1cwcmUtZmp4NU0/view?usp=drivesdk
Stock NE4 4.4.2 Odin Files: (Google Drive Links)
AP_I747UCUFNE4_1514807_REV04_user_low_ship.tar.md5
https://drive.google.com/file/d/0B0lfMZeSyJnYQlRqY2VmUXh4Zk0/view?usp=drivesdk
BL_I747UCUFNE4_1514807_REV04_user_low_ship.tar.md5
https://drive.google.com/file/d/0B0lfMZeSyJnYbGRMNGRLQnFlLTg/view?usp=drivesdk
CP_I747UCUFNE4_1514807_REV04_user_low_ship.tar.md5
https://drive.google.com/file/d/0B0lfMZeSyJnYeE12YmltNmJWbG8/view?usp=drivesdk
CSC_16G_ATT_I747ATTFNE4_1514807_REV04_user_low_ship.tar.md5
https://drive.google.com/file/d/0B0lfMZeSyJnYemotYmd3VXI4eGs/view?usp=drivesdk
Click to expand...
Click to collapse
Thank you guys for your help, so Im good as soon as I flash to 4.3 stock, what about the recovery, is that made by Odin? Or should I first flash a specific one?
About the 4.4.2, is it better than the 4.3 and would I be able to go to 4.3 in case I get the NE4?
Again thank you for your answers.
Once you upgrade to the 4.4.2 bootloader, you cannot downgrade to the 4.3 bootloader.
Stock Recovery will be installed by Odin.