Develop Bugs

Universal ROOT in 3 steps - Level: Asian

While searching for a method to root the JB build for the yarvik tablet of my family (usual methods have not been successful), i stumbled upon the following Windows based method that now i want to share and should work with a lot more devices:
On your PC:
1. Install USB/ADB drivers from your manufacturer's website
2. Install & connect via http://www.moborobo.com Management Tools, loads own device specific ADB-drivers
3. Download & install this Chinese piece of software from http://www.shuame.com/en/root/
Further steps obsolete, because they're offering an english Root-Tool now.
But for the sake of completion, they will remain here:
In case you don't understand what you do:
- On Website press blue download-button with arrow pointing downwards
- During Installation uncheck every checkbox except the one that grays out the next-button upon unchecking
the download has been a bit slow for me (10kb/sec), if it fails or the take it offline: drop a comment, perhaps i can share the setup file somehow
4. On your device: turn on USB-debugging
On your PC:
5. Run Moborobo Software, then plug your device to USB-Port, wait until Moborobo has recognized it (in my case i had to click some dialogues...)
6. Run freshly installed software from Shuame.com (titled Ë¢»ú¾«Áé in my start menu)
7. When shuame-Logo appears on your device's screen, head on the windows-software towards the 4th icon in the top row; on the appearing screen click on the 4th icon in the 2nd icon-row (the android with some chinese signs + ROOT as title)
on your device:
8. download SuperUser (or superSU) from Market or install via other sources (if not already done)
9. replace asian root / su files (recognized as older versions) with newer ones by SuperUser or superSU
10. delete 2 chinese shuame-APKs from /system/apps directory or uninstall via Titanium Backup
11. => you're done.
if more than 10 People complain they can't find the right button's to click
then i'm willing to post a few screenshots...
else: have fun!
Click to expand...
Click to collapse
oh, and if this worked for you: drop a comment and let the others know!
PS: props go out to the yarvik forum where i found this: http://forum.yarvik.com/showthread.php?4243-root-after-upgrade-to-4-1-1&p=12972&viewfull=1#post12972

reserved for screenshots & reports of success
[nt]

what do you think? possible for the optimus g (japanese version)

screenshots please

i have just rooted my hp slate 7 with this tool......i ran this then ran unlockroot tool i am now fully rooted....
well played my friend good find....now all i need is a nice shiny new rom to go with it lol....

beyored said:
i have just rooted my hp slate 7 with this tool......i ran this then ran unlockroot tool i am now fully rooted....
well played my friend good find....now all i need is a nice shiny new rom to go with it lol....
Click to expand...
Click to collapse
hy, i just bought a slate 7 too, but i can't find the usb drivers.. can you point them to me?? thanks

drifter94 said:
hy, i just bought a slate 7 too, but i can't find the usb drivers.. can you point them to me?? thanks
Click to expand...
Click to collapse
this is what i used they should work for you too my friend.....http://adbdriver.com/downloads/
i dont suppose you know of any cwm recovery for this device... iv searched everywhere......
iv managed to root and deodex the stock rom but gettin board now lol....just hope someone decides to develop for this tab.....fingers crossed....

beyored said:
this is what i used they should work for you too my friend.....http://adbdriver.com/downloads/
i don't suppose you know of any cwm recovery for this device... iv searched everywhere......
iv managed to root and deodex the stock rom but gettin board now lol....just hope someone decides to develop for this tab.....fingers crossed....
Click to expand...
Click to collapse
Thank you sir, gonna try this later.
No, i didn't see any custom recovery for this tablet, I think that it's because it's pretty new. But until now i love it. The only thing i saw was a "blank" forum thread on another forum which i can't recall right now, but i think you already saw that, if not i'm gonna link it to you.
(sorry for the OT )
Sent from my HP Slate 7 using xda app-developers app

drifter94 said:
Thank you sir, gonna try this late.
No, i didn't see any custom recovery for this tablet, I think that it's because it's pretty new. But until now i love it. The only thing i saw was a "blank" forum thread on another forum which i can't recall right now, but i think you already saw that, if not i'm gonna link it to you.
(sorry for the OT )
Sent from my HP Slate 7 using xda app-developers app
Click to expand...
Click to collapse
Sent from my HP Slate 7 using xda premium
Yeah I've seen the thread....and your welcome mate.... I'll let you know if I come across any ROMs......or Recovery's...

Hi,
root is working on my POV MOBII 1325 13.3" !!
BUT........
it's hard without screenshot about deleting chinese apk and replace kinguser_su with superSU...
(9. replace asian root / su files (recognized as older versions) with newer ones by SuperUser or superSU
10. delete 2 chinese shuame-APKs from /system/apps directory or uninstall via Titanium Backup)
please...... screenshots are welcome because I tried to do that but then I lose root !!
regards
alansan2013

deleted

It really works!
It does work on my Xperia miro :good:

I can't download Shaume.
I get 404 Not Found error.

Hamisxa said:
I can't download Shaume.
I get 404 Not Found error.
Click to expand...
Click to collapse
check your pm...

help
beyored said:
check your pm...
Click to expand...
Click to collapse
why cant i download it plz help me to root my hp slate 7

beyored said:
Sent from my HP Slate 7 using xda premium
Yeah I've seen the thread....and your welcome mate.... I'll let you know if I come across any ROMs......or Recovery's...
Click to expand...
Click to collapse
I can't install adb on any computer for the life of me!! Can you please make a flashable zip to root this table? Or something that doesn't require adb.. Thanks
Sent from my HP Slate 7 using xda app-developers app

help
beyored said:
i have just rooted my hp slate 7 with this tool......i ran this then ran unlockroot tool i am now fully rooted....
well played my friend good find....now all i need is a nice shiny new rom to go with it lol....
Click to expand...
Click to collapse
can u help me on this methoed

Hello,
Bit of feedback on your guide. Could benefit other Slate users
First I tried only using my adb drivers and skipped Moborobo, but I got a blank screen with what looks to be half of the right side of the notification bar is darker. So I rebooted and all was well.
I used Moborobo and it found my device and I used Shuame and it looked to be going well until I reached the point of encryption. So the software says press the right so I do and then it rebooted. There was no root and on screen it is asking me to press the blue button again as the green bar was only half so I did. This then put me on a boot loop. I booted into recovery and rebooted to system. It worked. So the screen was still spinning trying to do something and then out of no where it rebooted and same again with the darker area. So I unplugged and rebooted and it worked. I got root.
Now just for the tricky part of removing these Chinese files lol.
Good guide mate. Thank you very much.

SwannyBhoy said:
Hello,
Bit of feedback on your guide. Could benefit other Slate users
First I tried only using my adb drivers and skipped Moborobo, but I got a blank screen with what looks to be half of the right side of the notification bar is darker. So I rebooted and all was well.
I used Moborobo and it found my device and I used Shuame and it looked to be going well until I reached the point of encryption. So the software says press the right so I do and then it rebooted. There was no root and on screen it is asking me to press the blue button again as the green bar was only half so I did. This then put me on a boot loop. I booted into recovery and rebooted to system. It worked. So the screen was still spinning trying to do something and then out of no where it rebooted and same again with the darker area. So I unplugged and rebooted and it worked. I got root.
Now just for the tricky part of removing these Chinese files lol.
Good guide mate. Thank you very much.
Click to expand...
Click to collapse
Well that's a problem for me, if i get that ..( i got black screen twice, I thanked god it wasn't bricked, and decided to not try it again... Lucky third? Either bricked or rooted, not going to give it a go ) )
Sent from my HP Slate 7 using xda app-developers app

If you follow what I did mate you will get root. Its scary but I got it in the end. Its safe to use.. as long as you get in recovery you can save your device.
I have the problem of adding in English SuperUser. When I do and install binary I loose root.
Could someone detail how to do this correctly please? I will still be searching and trying.
Sent from my GT-N7105 using xda premium

[Q] HELP - Wiped the OS off of my Galaxy S3 I747

Alright, well I've come to a problem and I'm not quite sure how to fix it.
The title pretty much says it all, I've completely wiped the operating system off of my phone. There is nothing left, absolutely no data or anything. I was much too hasty and irresponsible, and I fear for the worst. I had previously attempted installing multiple ROMs multiple times using CWM to no avail so I re-rooted and switched over to Team Win. I know before installing a ROM you have to wipe your phone, well... I hit advanced wipe and within that I hit "system", went ahead and wiped. There's nothing left on my phone my phone and there are no ROMs on my SD card. I had backed up my phone before wiping but when I wiped that was also deleted. Before restarting it always warns me "No OS installed on your phone, are you sure you want to reboot?" Of course it's bricked and stays at the "Samsung Galaxy SIII" screen. I attempted putting a stock ROM back on my phone through ODIN, but a'las it didn't work (always stops at "SetupConnection"). I have nothing and there is no way for me to get a new ROM on the phone, I obviously cannot connect to my computer unless through download mode because the phone is bricked. So, what do I do? Is there any hope left for me or am I just completely screwed? The phone is less than a month old.

another option is to purchase a micro sd card and place a ROM and gapps (if required) on it, install the card and boot into recovery.
so when you connect your device to your pc, you're getting a yellow com connection in odin? what link did you follow for a stock ROM?
as long as you can still access recovery and download mode, there is hope, buddy.

xBeerdroiDx said:
another option is to purchase a micro sd card and place a ROM and gapps (if required) on it, install the card and boot into recovery.
so when you connect your device to your pc, you're getting a yellow com connection in odin? what link did you follow for a stock ROM?
as long as you can still access recovery and download mode, there is hope, buddy.
Click to expand...
Click to collapse
Yeah, when I connect to the PC I get a yellow com connection in ODIN. I followed what is, perhaps, a sketchy looking link for the stock ROM... It's not letting me post a link because I'm a new member to the board, though I've looked over this place plenty of times in the past. Should I look for something a bit more official and retry? I don't think it's going to work. Will a ROM work, without an OS? I know that may sound silly but everything I've tried so far has failed.

here's a link to the stock firmware with root already injected: http://forum.xda-developers.com/showthread.php?t=1739426
flash the tar in odin like you have been. make sure the auto reboot box is unticked. if you get a PASS after flashing, unplug the device, pull the battery, replace it and press the recovery button combo. once in recovery, wipe data and wipe cache. reboot.
lemme know if that worked, otherwise throw a ROM on a micro sd card as stated and go that route
btw, a ROM is the OS.

And also, my phone has to be rooted for a ROM to be installed, right? Well there's no guarantee my phone is still rooted since I've wiped literally everything on the phone. I like the idea of a placing it all on an SD card but that could be wasted money and I don't have very much money to spend, especially if a ROM isn't going to replace all of the needed system files which have been deleted.

NovoAevum said:
And also, my phone has to be rooted for a ROM to be installed, right? Well there's no guarantee my phone is still rooted since I've wiped literally everything on the phone. I like the idea of a placing it all on an SD card but that could be wasted money and I don't have very much money to spend, especially if a ROM isn't going to replace all of the needed system files which have been deleted.
Click to expand...
Click to collapse
follow my directions above to flash rooted stock firmware

xBeerdroiDx said:
follow my directions above to flash rooted stock firmware
Click to expand...
Click to collapse
Alright, thanks a lot. My internet is super slow so it'll probably be a while before the file is completely downloaded. Let's hope this works. I'll get back to you when it's all said and done.

xBeerdroiDx said:
follow my directions above to flash rooted stock firmware
Click to expand...
Click to collapse
You have no idea how grateful I am, thank you so very, very much. It worked, I cannot express my gratitude. I truly appreciate it.

NovoAevum said:
You have no idea how grateful I am, thank you so very, very much. It worked, I cannot express my gratitude. I truly appreciate it.
Click to expand...
Click to collapse
booyah.
:good: thats why we're called a community. cheers!

NovoAevum said:
You have no idea how grateful I am, thank you so very, very much. It worked, I cannot express my gratitude. I truly appreciate it.
Click to expand...
Click to collapse
One small thing you can do is to hit the "Thanks" button on xBeerdroiDx's posts.
:good:

im having the same promblem
post-mortem said:
One small thing you can do is to hit the "Thanks" button on xBeerdroiDx's posts.
:good:
Click to expand...
Click to collapse
how did u get your phone to connect to odin

dorvilkervins said:
how did u get your phone to connect to odin
Click to expand...
Click to collapse
Have you installed the Samsung drivers?
---------- Post added at 06:03 PM ---------- Previous post was at 05:27 PM ----------
Can you explain what happened with your phone? How did you "lose everything?" Is it able to boot up into Android? Can you get into recovery (TWRP)? Did you accidentally wipe something you shouldn't have?

I accidentally wiped my OS on my Galaxy S3 AT&T - Please Help!!!
Hello all,
I am a rookie user of smartphones and I have a Samsung Galaxy S3 AT&T. I accidentally wiped my OS leaving me with no OS. The good news is that I can still use Team Win and boot into recovery. How can I download and install a new OS? I live in a rural area with no place to go to get this fixed; so I would really appreciate any and all help on this matter. Thanks for reading
Tyler
---------- Post added at 01:10 AM ---------- Previous post was at 12:24 AM ----------
Hello all,
I am a rookie user of smartphones and I have a Samsung Galaxy S3 AT&T. I accidentally wiped my OS leaving me with no OS. The good news is that I can still use Team Win Development. Using Team Win, how can I download and install a new OS? I live in a rural area with no place to go to get this fixed; so I would really appreciate any and all help on this matter. Thanks for reading
Tyler

Check this:
http://forum.xda-developers.com/showthread.php?t=2363882

Hey Bro, xBeerdroiDx, Indeed this is a great community, but, it is the fellas' and ladies, like you,that have the knowledge and experience ,that do not have to assist anyone ,but do anyway. I am just another member here, but as a brother, you get a pat on the back from the gallery. Your willingness to help is very much appreciated.

me too
so twrp and dl mode are cool...but odin fails and zip in recovery kicks a status 7 error...what to do?
sgh-i747 .....i think my build.prop or bootloader is jacked?

hewhoisnotasothers said:
so twrp and dl mode are cool...but odin fails and zip in recovery kicks a status 7 error...what to do?
sgh-i747 .....i think my build.prop or bootloader is jacked?
Click to expand...
Click to collapse
Did you try \the latest CWM or TWRP? Maybe the ROM needs a more recent bootloader?

gottam
audit13 said:
Did you try \the latest CWM or TWRP? Maybe the ROM needs a more recent bootloader?
Click to expand...
Click to collapse
the bootloader may have been corrupted by a 4.x downgraded flash....i'm not sure how to proceed...

hewhoisnotasothers said:
the bootloader may have been corrupted by a 4.x downgraded flash....i'm not sure how to proceed...
Click to expand...
Click to collapse
Were you on stock 4.3 ROM?

audit13 said:
Were you on stock 4.3 ROM?
Click to expand...
Click to collapse
yes...I have tryed everything i can think of....i can flash recoverys just fine, but i havent found a rom that will boot past the splash screen...most just fail in odin...i don't want to jtag if i dont have to...in theory there should be hope since i can get into DL and twrp....

Stuck on Boot Screen CM10

Just tried to installed CM10 on my T-Mobile Samsung Galaxy II. It's been stuck at the boot animation for over 10 minutes. What can I do? My SD card bit the dust and I don't have the backup I'd made previously. I had the SD card's contents saved on my desktop but no idea where the file would be or what it's name would be for the backup I made previously.
I'm not really a n00b per say. Have flashed CM roms on other phones in the past with no issues. First time this has happened. I've tried doing a factory wipe/reset, wiping the cache and Dalvik. Multiple times. No change. Any help is much appreciated as this is my only phone.

UPDATE: Found my CMW backup files but no luck using them. CMW gives me a MD5 mismatch now. Any ideas? Where can I find a stock T-Mobile ROM of 4.1.2? (I think that was the version I had last)
Hollywood80 said:
Just tried to installed CM10 on my T-Mobile Samsung Galaxy II. It's been stuck at the boot animation for over 10 minutes. What can I do? My SD card bit the dust and I don't have the backup I'd made previously. I had the SD card's contents saved on my desktop but no idea where the file would be or what it's name would be for the backup I made previously.
I'm not really a n00b per say. Have flashed CM roms on other phones in the past with no issues. First time this has happened. I've tried doing a factory wipe/reset, wiping the cache and Dalvik. Multiple times. No change. Any help is much appreciated as this is my only phone.
Click to expand...
Click to collapse

UPDATE #2: So I am trying to do what's said over at http://forum.xda-developers.com/showthread.php?t=1513359 but getting stuck at Step 6/7. No matter what it seems Odin will not recognize my phone. Phone is in Download mode as it says to do but Odin never detects any phone plugged in. Any help?
Have latest Samsung drivers but it appears per Device Manager that it keeps getting stuck (the phone) at "This device cannot start. (Code 10)" error. Tried uninstalling device, uninstalling drivers, and reinstalling drivers. Same thing every time. I got ODIN to recognize the phone once but after a few minutes it came back with FAILED.
Wish I could figure this out. More frustrated that I can't get it at least back to stock than anything now.

If you have CM10 installed on your phone and if its stuck at boot screen. Do this:
1. Download darkside-cachewipe.zip from http://sourceforge.net/projects/darksidetools/files/ and copy it to your sdcard.
2. Remove the battery wait for 10 seconds
3. Insert the battery again. Holding the volume keys and power key, boot into recovery mode
4. Install zip from sdcard and run darkside-cachewipe.zip
5. Try booting the phone again.
6. This time it should boot correctly.

virajss said:
If you have CM10 installed on your phone and if its stuck at boot screen. Do this:
1. Download darkside-cachewipe.zip from http://sourceforge.net/projects/darksidetools/files/ and copy it to your sdcard.
2. Remove the battery wait for 10 seconds
3. Insert the battery again. Holding the volume keys and power key, boot into recovery mode
4. Install zip from sdcard and run darkside-cachewipe.zip
5. Try booting the phone again.
6. This time it should boot correctly.
Click to expand...
Click to collapse
I agree(not that you need someone to agree with you), but this should take care of the issue.

idtheftvictim said:
I agree(not that you need someone to agree with you), but this should take care of the issue.
Click to expand...
Click to collapse
Well that seemed to work. I had to do a few other things but I ended up getting CM 10.1 RC5 installed and got to the homescreen. Problem I'm having now is I can't get a signal from my carrier at all. No matter where I'm at. It was connected to it at one point but now it doesn't. It's registering on the network because it says T-Mobile but no bars and no 4G indicator showing up whatsoever. Any ideas? Kind of useless at the moment with no signal.
EDIT: So from another post I have on the CM forums they said to look here in XDA for an updated radio? Any ideas? I'm not a n00b but I haven't modded a phone since my old HTC original Android phone years ago so I'm a bit rusty. My current Baseband is currently T989UVLE1.

Hollywood80 said:
Well that seemed to work. I had to do a few other things but I ended up getting CM 10.1 RC5 installed and got to the homescreen. Problem I'm having now is I can't get a signal from my carrier at all. No matter where I'm at. It was connected to it at one point but now it doesn't. It's registering on the network because it says T-Mobile but no bars and no 4G indicator showing up whatsoever. Any ideas? Kind of useless at the moment with no signal.
EDIT: So from another post I have on the CM forums they said to look here in XDA for an updated radio? Any ideas? I'm not a n00b but I haven't modded a phone since my old HTC original Android phone years ago so I'm a bit rusty. My current Baseband is currently T989UVLE1.
Click to expand...
Click to collapse
You will have to update the baseband to MC6
http://goo.im/devs/Void_Dweller/SGH-T989_UVMC6_radio.zip

virajss said:
You will have to update the baseband to MC6
Click to expand...
Click to collapse
Yeah finally found that out. There is a TLMC4 but it says it's for Telus not T-Mobile. Would that be a problem?

Hollywood80 said:
Yeah finally found that out. There is a TLMC4 but it says it's for Telus not T-Mobile. Would that be a problem?
Click to expand...
Click to collapse
Use the radio from my link: Its for TMobile
http://goo.im/devs/Void_Dweller/SGH-T989_UVMC6_radio.zip

virajss said:
Use the radio from my link: Its for TMobile
http://goo.im/devs/Void_Dweller/SGH-T989_UVMC6_radio.zip
Click to expand...
Click to collapse
Just applied the UVMC6 and....IT WORKS! Thanks to all of you for ALL of your help in helping this non-n00b but feeling like a n00b get his **** fixed! You all rock!

Hollywood80 said:
Just applied the UVMC6 and....IT WORKS! Thanks to all of you for ALL of your help in helping this non-n00b but feeling like a n00b get his **** fixed! You all rock!
Click to expand...
Click to collapse
How about hitting the "Thanks" button, if the posts above have helped you.

virajss said:
How about hitting the "Thanks" button, if the posts above have helped you.
Click to expand...
Click to collapse
Ahh yes! Done. Thanks again. Do have one last question. When I finally got into the phone again it started to re-download all my apps I'd had installed previously. But my wi-fi dropped out in the middle of it. How can I make it do that automatic download of my previous apps/settings again? Or can I?

Hollywood80 said:
Ahh yes! Done. Thanks again. Do have one last question. When I finally got into the phone again it started to re-download all my apps I'd had installed previously. But my wi-fi dropped out in the middle of it. How can I make it do that automatic download of my previous apps/settings again? Or can I?
Click to expand...
Click to collapse
Not sure if you can do that. Go to google playstore from your laptop and then install all the missing apps from the laptop. Its faster that way.
Me too am a flashoholic, so I create update.zip file from TitaniumBackup app and keep it for installing all my apps from the recovery mode.

virajss said:
Not sure if you can do that. Go to google playstore from your laptop and then install all the missing apps from the laptop. Its faster that way.
Me too am a flashoholic, so I create update.zip file from TitaniumBackup app and keep it for installing all my apps from the recovery mode.
Click to expand...
Click to collapse
Yeah I have Titanium Backup even got the Pro one and my SD card got wiped so it can't restore anything now. I could just find the Titanium folder on my desktop because I had made a copy of the entire SD card just prior to it getting wiped clean.

Hard recovery for tab 3 10.1 P5210

I successfully rooted and installed twrp on my 10.1> I think I just made a big mistake tho and bricked my device. So i tried to used odin to install the factory firmware but when I load it odin freezes, only does this with the factory .md5 not recover.tar . I tried to format everything but nothing works I still have the twrp interface on my tab but when i turn it on its stuck at the galaxy tab 3 screen

Reinstall twrp with odin to see if that clears in?

cduced said:
Reinstall twrp with odin to see if that clears in?
Click to expand...
Click to collapse
Device doesnt show in com slot

fix
The exact same thing happened to me, the stock firmware file is almost 2 gig, odin isnt freezing, its verifying the file so load it then wait

Zidkijah posted on another thread a copy that I was able to use to un-brick mine. Note that the only problem is that it's a little bit different from the stock version. But so far so good, just need some tweaking.
I uploaded it to a dropbox account so if one doesn't work, you can try the other.
His Link
My Link
I plan on re-installing clockwork mod, backing it up to my SD card and trying out the Deodexed version that came with the P5210.
Here is the thread

andrugs said:
I successfully rooted and installed twrp on my 10.1> I think I just made a big mistake tho and bricked my device. So i tried to used odin to install the factory firmware but when I load it odin freezes, only does this with the factory .md5 not recover.tar . I tried to format everything but nothing works I still have the twrp interface on my tab but when i turn it on its stuck at the galaxy tab 3 screen
Click to expand...
Click to collapse
has happened to me too just yesterday you have to download your firmaware right from this site: http://samsung-updates.com/device/?id=GT-P5210
ps. very slow, you have to have patience, but at least they work

Simix93 said:
has happened to me too just yesterday you have to download your firmaware right from this site: http://samsung-updates.com/device/?id=GT-P5210
ps. very slow, you have to have patience, but at least they work
Click to expand...
Click to collapse
One thing though, I don't see one listed for the USA.
I'm sure it's because it was only released in June of 2013 and no official updates available.

gjimene2 said:
One thing though, I don't see one listed for the USA.
I'm sure it's because it was only released in June of 2013 and no official updates available.
Click to expand...
Click to collapse
this is for the USA but I do not know if it works, try: http://www.androidfilehost.com/?fid=23060877490002437
and anyway I do not think it is so important to the firmware for which the region is but just look at your tablet alive, right?

Simix93 said:
this is for the USA but I do not know if it works, try: http://www.androidfilehost.com/?fid=23060877490002437
and anyway I do not think it is so important to the firmware for which the region is but just look at your tablet alive, right?
Click to expand...
Click to collapse
So true, hopefully I didn't come off as to complain lol.
I have that file archived too. It has a good feel to it. The keyboard is bigger but looks just like the one of my Note 2, but with the numeric keys on top of the qwerty.

gjimene2 said:
So true, hopefully I didn't come off as to complain lol.
I have that file archived too. It has a good feel to it. The keyboard is bigger but looks just like the one of my Note 2, but with the numeric keys on top of the qwerty.
Click to expand...
Click to collapse
I did not understand what you wrote, but I hope functions, if that's okay with prizes that I do not miss one

[Q] Bricked with out custon rom??

So I think my phone is hard bricked. I was on G+ ealier today, clicked on a link that opened Chrome. got through a third of the web page and my phone freezes then the screen goes black... I have tried every troubleshoot trick provided by tmobile and samsung and the phone wont respond in any way. Just a black screen. Is it possible to brick your phone with out trying to flash a custom ROM??? The only thing new I have done in the past week was install "graph ti89" and "aviate." I dont know if this has anything to do with it but tmobile has being try to get me to install the kitkat OTA for the last week and I keep ignoring it.

just update
jcampana28 said:
So I think my phone is hard bricked. I was on G+ ealier today, clicked on a link that opened Chrome. got through a third of the web page and my phone freezes then the screen goes black... I have tried every troubleshoot trick provided by tmobile and samsung and the phone wont respond in any way. Just a black screen. Is it possible to brick your phone with out trying to flash a custom ROM??? The only thing new I have done in the past week was install "graph ti89" and "aviate." I dont know if this has anything to do with it but tmobile has being try to get me to install the kitkat OTA for the last week and I keep ignoring it.
Click to expand...
Click to collapse
Hi,
Do the update or factory reset your phone. You can always use KIES also.
Ms. K

Ms. K said:
Hi,
Do the update or factory reset your phone. You can always use KIES also.
Ms. K
Click to expand...
Click to collapse
Thanks for your input but the phone won't turn on at all. Can'T turn it on to update. Won't go into safe mode by pressing vol. up&home&power. When I plug it into the computer it says it needs drivers for "QHSUSB_BULK." Kies doesn't see it as a connected device...

If you haven't done anything to the phone why not call Tmobile and get a replacement..
Sent from my bad ass Kryon infused Note 3

deeznutz1977 said:
If you haven't done anything to the phone why not call Tmobile and get a replacement..
Sent from my bad ass Kryon infused Note 3
Click to expand...
Click to collapse
because i'd like to recover the data that is on the phone.

jcampana28 said:
because i'd like to recover the data that is on the phone.
Click to expand...
Click to collapse
A few threads down you would have found this... http://forum.xda-developers.com/showthread.php?p=47555043
My recovery image is here: http://www.mediafire.com/view/?6nu61z43y51v3k4
You need a 32 GB sd card and some luck. Also reading is a requirement.
Yours may be a special case though, as you claim nothing was going on besides you clicked a link. Should have absolutely nothing to do with ota, and everyone else who had done this was messing with their phone. This definitely works for 4.3, but no one had reported working on 4.4 (you were on 4.3 anyways). Good luck.
Sent from my SM-G900T using Tapatalk

noobtoob said:
A few threads down you would have found this... http://forum.xda-developers.com/showthread.php?p=47555043
My recovery image is here: http://www.mediafire.com/view/?6nu61z43y51v3k4
You need a 32 GB sd card and some luck. Also reading is a requirement.
Yours may be a special case though, as you claim nothing was going on besides you clicked a link. Should have absolutely nothing to do with ota, and everyone else who had done this was messing with their phone. This definitely works for 4.3, but no one had reported working on 4.4 (you were on 4.3 anyways). Good luck.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Mr Noobtoob, has anyone reported un-bricking a N900t running 4.4.2 (1st release, believe it ends in N94 or similar, NOT NE6)?
If so, did they do anything different?
Be well.

golfcartguy said:
Mr Noobtoob, has anyone reported un-bricking a N900t running 4.4.2 (1st release, believe it ends in N94 or similar, NOT NE6)?
If so, did they do anything different?
Be well.
Click to expand...
Click to collapse
I have not seen a successful report back of the nb4 firmware. Doesn't mean it doesn't work, just don't have confirmation.
Fusionized tweaking tapatalker here...

Thanks for the quick response!
Going to try, and will report back.
To clarify, it must be a Class 10 microsd card, and must be the same size (32gb), 1st formatted to exfat, correct?
Sent using XDA Free mobile app

golfcartguy said:
To clarify, it must be a Class 10 microsd card, and must be the same size (32gb), 1st formatted to exfat, correct?
Click to expand...
Click to collapse
Those are the magic ingredients!
Frank

Frank Westlake said:
Those are the magic ingredients!
Frank
Click to expand...
Click to collapse
Got it! So, to be clear;
1st - Format class 10 card to Exfat file system or structure
2nd - Using Win32Diskmapper, just point to the file (in my case kk900tunbrick image) and write to card. *Nothing special, should I verify Md5 sum, or just leave it as default settings?
3rd, Proceed to attempt to Unbrick (Battery at 100%, Put Sd card in slot, Then Add Battery, Connect cable - some say, some say doesn't matter, to computer, then attempt to boot with button sequence to download mode, or may boot by itself?)
Also, if the 1st image I downloaded does not work, can I reformat or wipe the sd card and start again with the other file (I believe a Pit file??)