Develop Bugs

[Q] Upgrading to B125 from B109

Hi, I just received my P6 and rooted it using eRoot. I have tried upgrading to B125 (running B109 out the box) by downloading the B125 file, passing it to dload on SD and performing a local upgrade, once the device boots to perform this it immediately says FAIL, and if i select the file manually it says "E:\signature verification failed" any ideas on how to solve this? Am I meant to update to something else inbetween before jumping to B125? (I've downloaded the file twice just to make sure it isn't corrupted or anything). I am a complete noob with this device, used to doing this sort of thing through CWM on my Nexus 7.
I have looked around this forum and seen various answers involving using TWRP first which if I could avoid I'd like to avoid as my aim is to load stock firmware without any of the bloatware that comes with my service provider, I'll leave the CFW stuff like AOSP for my tablet.
Any help would be greatly appreciated!

JK666 said:
Hi, I just received my P6 and rooted it using eRoot. I have tried upgrading to B125 (running B109 out the box) by downloading the B125 file, passing it to dload on SD and performing a local upgrade, once the device boots to perform this it immediately says FAIL, and if i select the file manually it says "E:\signature verification failed" any ideas on how to solve this? Am I meant to update to something else inbetween before jumping to B125? (I've downloaded the file twice just to make sure it isn't corrupted or anything). I am a complete noob with this device, used to doing this sort of thing through CWM on my Nexus 7.
I have looked around this forum and seen various answers involving using TWRP first which if I could avoid I'd like to avoid as my aim is to load stock firmware without any of the bloatware that comes with my service provider, I'll leave the CFW stuff like AOSP for my tablet.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
Make sure you unplugged the usb cable when upgrading. :good:

Nope
warea said:
Make sure you unplugged the usb cable when upgrading. :good:
Click to expand...
Click to collapse
Yeah no, just retried it without any USB connection)(charging or PC) and it gives me the same error.

JK666 said:
Yeah no, just retried it without any USB connection)(charging or PC) and it gives me the same error.
Click to expand...
Click to collapse
Do you have enough battery? It failed for me once when I was at a low charge.

Battery level is fine
bokchoi2020 said:
Do you have enough battery? It failed for me once when I was at a low charge.
Click to expand...
Click to collapse
It was sitting on 89% charge when I initiated the procedure...
Any idea if using CWMR from this link: http://forum.xda-developers.com/showthread.php?t=2417919 would be any better? It keeps stock recovery, just figured another option wouldn't hurt?

JK666 said:
It was sitting on 89% charge when I initiated the procedure...
Any idea if using CWMR from this link: http://forum.xda-developers.com/showthread.php?t=2417919 would be any better? It keeps stock recovery, just figured another option wouldn't hurt?
Click to expand...
Click to collapse
Try to do a MD5 sum check. Probably your download or copying to SD card is corrupted.
Redownload the B125, but worse comes worse, try B118 or B122.

bokchoi2020 said:
Try to do a MD5 sum check. Probably your download or copying to SD card is corrupted.
Redownload the B125, but worse comes worse, try B118 or B122.
Click to expand...
Click to collapse
Re-downloaded it and used a proper zip program to unzip the file and it worked!!! So happy
Quick question what would you guys recommend I do to get rid of the service provider bloatware that came with my phone because with the upgrade all that stuff still stayed on my device? I tried uninstalling it normally and it just says system application cannot uninstall...
Battery life is a HUGE improvement. Sitting on 40% after 15 hours of abuse. Thanks again guys!

JK666 said:
Re-downloaded it and used a proper zip program to unzip the file and it worked!!! So happy
Quick question what would you guys recommend I do to get rid of the service provider bloatware that came with my phone because with the upgrade all that stuff still stayed on my device? I tried uninstalling it normally and it just says system application cannot uninstall...
Battery life is a HUGE improvement. Sitting on 40% after 15 hours of abuse. Thanks again guys!
Click to expand...
Click to collapse
That's great to hear!
BTW to get rid of system apps you do not want, install this. Your phone must be rooted in order for this to work.
https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp
Tho becareful, don't get rid of vital apps.
If you haven't rooted your phone, head here.
http://forum.xda-developers.com/showthread.php?t=2390491
Good luck!

[Q] Bricked with out custon rom??

So I think my phone is hard bricked. I was on G+ ealier today, clicked on a link that opened Chrome. got through a third of the web page and my phone freezes then the screen goes black... I have tried every troubleshoot trick provided by tmobile and samsung and the phone wont respond in any way. Just a black screen. Is it possible to brick your phone with out trying to flash a custom ROM??? The only thing new I have done in the past week was install "graph ti89" and "aviate." I dont know if this has anything to do with it but tmobile has being try to get me to install the kitkat OTA for the last week and I keep ignoring it.

just update
jcampana28 said:
So I think my phone is hard bricked. I was on G+ ealier today, clicked on a link that opened Chrome. got through a third of the web page and my phone freezes then the screen goes black... I have tried every troubleshoot trick provided by tmobile and samsung and the phone wont respond in any way. Just a black screen. Is it possible to brick your phone with out trying to flash a custom ROM??? The only thing new I have done in the past week was install "graph ti89" and "aviate." I dont know if this has anything to do with it but tmobile has being try to get me to install the kitkat OTA for the last week and I keep ignoring it.
Click to expand...
Click to collapse
Hi,
Do the update or factory reset your phone. You can always use KIES also.
Ms. K

Ms. K said:
Hi,
Do the update or factory reset your phone. You can always use KIES also.
Ms. K
Click to expand...
Click to collapse
Thanks for your input but the phone won't turn on at all. Can'T turn it on to update. Won't go into safe mode by pressing vol. up&home&power. When I plug it into the computer it says it needs drivers for "QHSUSB_BULK." Kies doesn't see it as a connected device...

If you haven't done anything to the phone why not call Tmobile and get a replacement..
Sent from my bad ass Kryon infused Note 3

deeznutz1977 said:
If you haven't done anything to the phone why not call Tmobile and get a replacement..
Sent from my bad ass Kryon infused Note 3
Click to expand...
Click to collapse
because i'd like to recover the data that is on the phone.

jcampana28 said:
because i'd like to recover the data that is on the phone.
Click to expand...
Click to collapse
A few threads down you would have found this... http://forum.xda-developers.com/showthread.php?p=47555043
My recovery image is here: http://www.mediafire.com/view/?6nu61z43y51v3k4
You need a 32 GB sd card and some luck. Also reading is a requirement.
Yours may be a special case though, as you claim nothing was going on besides you clicked a link. Should have absolutely nothing to do with ota, and everyone else who had done this was messing with their phone. This definitely works for 4.3, but no one had reported working on 4.4 (you were on 4.3 anyways). Good luck.
Sent from my SM-G900T using Tapatalk

noobtoob said:
A few threads down you would have found this... http://forum.xda-developers.com/showthread.php?p=47555043
My recovery image is here: http://www.mediafire.com/view/?6nu61z43y51v3k4
You need a 32 GB sd card and some luck. Also reading is a requirement.
Yours may be a special case though, as you claim nothing was going on besides you clicked a link. Should have absolutely nothing to do with ota, and everyone else who had done this was messing with their phone. This definitely works for 4.3, but no one had reported working on 4.4 (you were on 4.3 anyways). Good luck.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Mr Noobtoob, has anyone reported un-bricking a N900t running 4.4.2 (1st release, believe it ends in N94 or similar, NOT NE6)?
If so, did they do anything different?
Be well.

golfcartguy said:
Mr Noobtoob, has anyone reported un-bricking a N900t running 4.4.2 (1st release, believe it ends in N94 or similar, NOT NE6)?
If so, did they do anything different?
Be well.
Click to expand...
Click to collapse
I have not seen a successful report back of the nb4 firmware. Doesn't mean it doesn't work, just don't have confirmation.
Fusionized tweaking tapatalker here...

Thanks for the quick response!
Going to try, and will report back.
To clarify, it must be a Class 10 microsd card, and must be the same size (32gb), 1st formatted to exfat, correct?
Sent using XDA Free mobile app

golfcartguy said:
To clarify, it must be a Class 10 microsd card, and must be the same size (32gb), 1st formatted to exfat, correct?
Click to expand...
Click to collapse
Those are the magic ingredients!
Frank

Frank Westlake said:
Those are the magic ingredients!
Frank
Click to expand...
Click to collapse
Got it! So, to be clear;
1st - Format class 10 card to Exfat file system or structure
2nd - Using Win32Diskmapper, just point to the file (in my case kk900tunbrick image) and write to card. *Nothing special, should I verify Md5 sum, or just leave it as default settings?
3rd, Proceed to attempt to Unbrick (Battery at 100%, Put Sd card in slot, Then Add Battery, Connect cable - some say, some say doesn't matter, to computer, then attempt to boot with button sequence to download mode, or may boot by itself?)
Also, if the 1st image I downloaded does not work, can I reformat or wipe the sd card and start again with the other file (I believe a Pit file??)

[Q] Huawei Ascend P6 update from B510 to B520 (rooted device)

Hi!
About a week ago, the two icons on my phone - settings and tools- showed '1 update available' symbol. It was about the firmware update from B510 to B520. I tried the normal online procedure but it did not work. Again, following the XDA Forum guidelines, Huawei News Forums and some other help forums online, still I could not find any easy steps or guidance describing the exact situation i.e. an update procedure from B510 to B520 for P6. Later, I remembered that my phone has been rooted for a while. I do not know if that was the reason. . . ? To be honest, I am an Android novice. So, I need someone to help me in as simple way as possible. Please, anyone?
Regards and thanks, in advance!
Sumppa7

Hi, download and install the full update via sd card.
http://www.huaweiblog.de/huawei/huawei-ascend-p6-ota-update-b520-update/ ' The first download link for full version. The second link in the bottom of article is the OTA update.
updating in this way, the root permissions will be removed, simply reapply again.

Sumppa7 said:
Hi!
About a week ago, the two icons on my phone - settings and tools- showed '1 update available' symbol. It was about the firmware update from B510 to B520. I tried the normal online procedure but it did not work. Again, following the XDA Forum guidelines, Huawei News Forums and some other help forums online, still I could not find any easy steps or guidance describing the exact situation i.e. an update procedure from B510 to B520 for P6. Later, I remembered that my phone has been rooted for a while. I do not know if that was the reason. . . ? To be honest, I am an Android novice. So, I need someone to help me in as simple way as possible. Please, anyone?
Regards and thanks, in advance!
Sumppa7
Click to expand...
Click to collapse
Your phone is rooted, but did you made any changes to build.prop / local.prop files? For repairing drop zone manager/ changing region / repairing phone sound volume restrictions? If you've done that, you must revert back the changes first. All files must be in their default condition - then try update again.
What message it gives you, when you try to update? Does the phone goes in recovery mode? (black screen with android on the background and some yellow writings)
If you rooted with VRoot, simply try to unroot again with the same program. The program itself have this option. Than try again online.
If in the end you cannot update online, just update with flashing the update thru LOCAL UPDATE from your SD card.

Thanks, but I need more help, please!
ThunderBird891 said:
Your phone is rooted, but did you made any changes to build.prop / local.prop files? For repairing drop zone manager/ changing region / repairing phone sound volume restrictions? If you've done that, you must revert back the changes first. All files must be in their default condition - then try update again.
What message it gives you, when you try to update? Does the phone goes in recovery mode? (black screen with android on the background and some yellow writings)
If you rooted with VRoot, simply try to unroot again with the same program. The program itself have this option. Than try again online.
If in the end you cannot update online, just update with flashing the update thru LOCAL UPDATE from your SD card.
Click to expand...
Click to collapse
Hello, ThunderBird891!
I am so glad that you replied - know that you are the first person ever to reply to me in this forum since I joined in!
To move forward, I would like you to know a few more things and, please, note that I am a novice, who just happened to try the rooting process out of curiosity.
I might have used Vroot or RootGenius. Next, I don't know how to revert build.prop / local.prop files? For repairing drop zone manager/ changing region / repairing phone sound volume restrictions, either. Or, do you mean revert to factory settings? I don't have an SD card! Depressing, right?
But. . .one thing, I know is that the phone goes to recovery mode as you described, a black screen with android on the background and some yellow writings - error 7 or something. Finally, it goes back to reboot and repeats the whole process after the normal reboot but no update, still.
What can I do then?
HELP!!!

Look like your download is corrupt or something, did you try to download it again?

Sumanp7 said:
Hello, ThunderBird891!
I am so glad that you replied - know that you are the first person ever to reply to me in this forum since I joined in!
To move forward, I would like you to know a few more things and, please, note that I am a novice, who just happened to try the rooting process out of curiosity.
I might have used Vroot or RootGenius. Next, I don't know how to revert build.prop / local.prop files? For repairing drop zone manager/ changing region / repairing phone sound volume restrictions, either. Or, do you mean revert to factory settings? I don't have an SD card! Depressing, right?
But. . .one thing, I know is that the phone goes to recovery mode as you described, a black screen with android on the background and some yellow writings - error 7 or something. Finally, it goes back to reboot and repeats the whole process after the normal reboot but no update, still.
What can I do then?
HELP!!!
Click to expand...
Click to collapse
Hi! I'm glad to respond you!
It doesn't matter that your phone was rooted once! And even if it is rooted now - still it must download and upgrade your firmware. The only difference after the upgrade will be, that you will lose you root!
And so I think the problem is something other! So i suggest you to do the whole downgrade to 4.2 procedure, and then go back to updating to all versions up to B520. Don't worry! When you go back B132 for example, it will prompt you that it has upgrade vie OTA (Over The Air) so you can upgrade directly! Just follow my instructions STRICTLY, just as I described in this thread: http://forum.xda-developers.com/ascend-p6/general/how-to-downgrade-4-4-4-2-change-chinese-t2951566
(the downgrade process can be done with any official huawei 4.2 firmware, like B125 for example, not only B132! I just prefer to use B132. You can use the same firmware version, with which you phone was delivered to you. If you can remember this version number of course. I personally prefer B132 because this was the version with which my phone was shipped to me. )
When you downgrade you will lost any data on the phone, but you'll be able to go B520 - we hope! I think, that there is no problem that you have no SD Card! Just put the update/upgrade/downgrade files in the dload folder of the internal memory of you device. If there is no dload folder, you can create it! If it doesn't downgrade again, then try to get/find some sd card from friend or just buy one and try the procedure again from the sd card! I can't say if the problem persist because the lack of SD Card, because I have SD and I've never tried to do it from internal memory! Just try and write me again!
Also I would like to know in which country / region you're in?

Thanks for your interest!
_Arjen_ said:
Look like your download is corrupt or something, did you try to download it again?
Click to expand...
Click to collapse
Hi!
I tried it so many times that I am so tired now. That's why I am here trying to find out the solution through people like you in this forum. But, thanks and hopefully, I will get some help, eventually!
Cheers!

Still Not Successful!
ThunderBird891 said:
Hi! I'm glad to respond you!
It doesn't matter that your phone was rooted once! And even if it is rooted now - still it must download and upgrade your firmware. The only difference after the upgrade will be, that you will lose you root!
And so I think the problem is something other! So i suggest you to do the whole downgrade to 4.2 procedure, and then go back to updating to all versions up to B520. Don't worry! When you go back B132 for example, it will prompt you that it has upgrade vie OTA (Over The Air) so you can upgrade directly! Just follow my instructions STRICTLY, just as I described in this thread: http://forum.xda-developers.com/ascend-p6/general/how-to-downgrade-4-4-4-2-change-chinese-t2951566
(the downgrade process can be done with any official huawei 4.2 firmware, like B125 for example, not only B132! I just prefer to use B132. You can use the same firmware version, with which you phone was delivered to you. If you can remember this version number of course. I personally prefer B132 because this was the version with which my phone was shipped to me. )
When you downgrade you will lost any data on the phone, but you'll be able to go B520 - we hope! I think, that there is no problem that you have no SD Card! Just put the update/upgrade/downgrade files in the dload folder of the internal memory of you device. If there is no dload folder, you can create it! If it doesn't downgrade again, then try to get/find some sd card from friend or just buy one and try the procedure again from the sd card! I can't say if the problem persist because the lack of SD Card, because I have SD and I've never tried to do it from internal memory! Just try and write me again!
Also I would like to know in which country / region you're in?
Click to expand...
Click to collapse
Hi!
I tried every possible way, I even bought an SD card. . . but no success! BTW, I am from Finland and the OTA information says ''European Channel Update''. Any luck?
Happy New Year 2015!
Sumppa7

Try to reset the phone and wipe the internal storage, then put the update in the internal storage like described before ( dload folder containing an update.app file).
Sent from my SM-G850F using xda app-developers app
---------- Post added at 14:28 ---------- Previous post was at 14:26 ----------
And happy new year to you too.
Sent from my SM-G850F using xda app-developers app

Finally!!!
tileeq said:
Try to reset the phone and wipe the internal storage, then put the update in the internal storage like described before ( dload folder containing an update.app file).
Sent from my SM-G850F using xda app-developers app
---------- Post added at 14:28 ---------- Previous post was at 14:26 ----------
And happy new year to you too.
Sent from my SM-G850F using xda app-developers app
Click to expand...
Click to collapse
Problem solved! You, sir, are one genius personality. Hats off!

Sumppa7 said:
Problem solved! You, sir, are one genius personality. Hats off!
Click to expand...
Click to collapse
I'm glad i could help. Hit thanks button next time
Sent from my SM-G850F using xda app-developers app

Unable to install latest M8s OTA update v2.20.401.1

Hello,
I'm new to this forum, and I could not find anything related to this issue. I'm successfully downloading the latest update and when I try to install it, the installation goes up to 25% and I get the red exclamation mark afterwards. The phone then restarts, and I'm back at the beginning, where I have to re-download the update all over again. I don't have any custom ROMs flashed on my device, it's just like I bought it, the latest update that I made was the update to Android v6.0.1. Current software number is v2.10.401.1, if that is of any importance. I've factory reset the phone, and tried applying the update on a fresh phone, but it still won't work.
Also, while I'm here, I might just ask... I'm getting frequent app crashes/unresponsive app, mostly on the apps that I'm using the most, Facebook and Instagram. Facebook is more stable, crash/unresponsiveness does not happen very often, but for Instagram it's always happening after scrolling 3-4 images. Also, the Sense Home app is always getting unresponsive after a phone restart, and I have to restart it several times until it gets back to normal, since it cannot recover from it, I'm not seeing the home screen at all.
I was very satisfied with my phone before the update to Android 6, but after upgrade, I'm frequently having these minor problems, another one of which is the SD card "unexpectedly removed" error, which is happening when I open up the gallery or the file manager. I'm running low on patience, I really hoped that this last update will fix things, but I'm very close to slamming the phone off the wall, that's how frustrated I am. Please help

Well I'm no expert here but I've also experienced the freezes in such apps and even normal restart didn't work, so I had to force restart it. This happened in marshmallow and lollipop both so i tried removing my sd card and freezes were gone. In my case it was the sd card, so you can try that.
And for the update check if your bootloader is locked, assuming you bought it refurbished or used, the previous owner might have done some tinkering.
Hope you find the solution soon :good:

spiderwebmkd said:
Hello,
I'm new to this forum, and I could not find anything related to this issue. I'm successfully downloading the latest update and when I try to install it, the installation goes up to 25% and I get the red exclamation mark afterwards. The phone then restarts, and I'm back at the beginning, where I have to re-download the update all over again. I don't have any custom ROMs flashed on my device, it's just like I bought it, the latest update that I made was the update to Android v6.0.1. Current software number is v2.10.401.1, if that is of any importance. I've factory reset the phone, and tried applying the update on a fresh phone, but it still won't work.
Also, while I'm here, I might just ask... I'm getting frequent app crashes/unresponsive app, mostly on the apps that I'm using the most, Facebook and Instagram. Facebook is more stable, crash/unresponsiveness does not happen very often, but for Instagram it's always happening after scrolling 3-4 images. Also, the Sense Home app is always getting unresponsive after a phone restart, and I have to restart it several times until it gets back to normal, since it cannot recover from it, I'm not seeing the home screen at all.
I was very satisfied with my phone before the update to Android 6, but after upgrade, I'm frequently having these minor problems, another one of which is the SD card "unexpectedly removed" error, which is happening when I open up the gallery or the file manager. I'm running low on patience, I really hoped that this last update will fix things, but I'm very close to slamming the phone off the wall, that's how frustrated I am. Please help
Click to expand...
Click to collapse
If you are willing to, you can unlock the bootloader from http://www.htcdev.com/bootloader/ and flash a stock sense ROM or other custom ROMs and that might solve the app crash problem.

bilal.fanatic said:
Well I'm no expert here but I've also experienced the freezes in such apps and even normal restart didn't work, so I had to force restart it. This happened in marshmallow and lollipop both so i tried removing my sd card and freezes were gone. In my case it was the sd card, so you can try that.
And for the update check if your bootloader is locked, assuming you bought it refurbished or used, the previous owner might have done some tinkering.
Hope you find the solution soon :good:
Click to expand...
Click to collapse
I've already tried removing the SD card, and I've seen slight improvement in the app crashes, but they were still occurring. My bootloader is locked, but I'm going to unlock it now and flash a new ROM, I can't play around with it anymore

spiderwebmkd said:
I've already tried removing the SD card, and I've seen slight improvement in the app crashes, but they were still occurring. My bootloader is locked, but I'm going to unlock it now and flash a new ROM, I can't play around with it anymore
Click to expand...
Click to collapse
Before you do that .. as there is almost no custom ROM available for M8s except CM which is in progress, I don't suggest to unlock bootloader.. try to find and install 2.10.401.1 RUU
Installing RUU will usually fix this kind of problem if the data partition is sort of corrupted but not damaged.

ckpv5 said:
Before you do that .. as there is almost no custom ROM available for M8s except CM which is in progress, I don't suggest to unlock bootloader.. try to find and install 2.10.401.1 RUU
Installing RUU will usually fix this kind of problem if the data partition is sort of corrupted but not damaged.
Click to expand...
Click to collapse
You are suggesting to install the same software version that I currently have? Where do I find it and how do I install it manually?

spiderwebmkd said:
You are suggesting to install the same software version that I currently have? Where do I find it and how do I install it manually?
Click to expand...
Click to collapse
Yeah, same version then after OTA to 2.20.401.1
You can read this - http://forum.xda-developers.com/htc...lp-thread-htc-one-m8s-to-stock-howto-t3190238
and this - http://forum.xda-developers.com/htc-one-m8/one-m8s-general/make-custom-recovery-htc-one-m8s-t3114245
on how to manually install RUU
And for the RUU .. I have to check my PC for the full filename so it is easier to find link. I'll let you know tomorrow (on mobile now)

spiderwebmkd said:
I've already tried removing the SD card, and I've seen slight improvement in the app crashes, but they were still occurring. My bootloader is locked, but I'm going to unlock it now and flash a new ROM, I can't play around with it anymore
Click to expand...
Click to collapse
If thats what you want to do I'd suggest you try cm12.1 . Unfortunately its the only ROM available to us but its way better than stock in terms of performance imho. But do that if you're willing to sacrifice some things such as double tap to wake and also any 3rd party camera apps, because they crash alot and yeah no boomsound. :fingers-crossed:

bilal.fanatic said:
If thats what you want to do I'd suggest you try cm12.1 . Unfortunately its the only ROM available to us but its way better than stock in terms of performance imho. But do that if you're willing to sacrifice some things such as double tap to wake and also any 3rd party camera apps, because they crash alot and yeah no boomsound. :fingers-crossed:
Click to expand...
Click to collapse
I'll try with @ckpv5 suggestion, to install 2.10.401.1 RUU and then try OTA upgrade to 2.20.401.1. If it fails, or if it succeeds but apps are still crashing as they were before, I'll definitely switch to cm, whatever version is stable at the moment. Double tap to wake is really annoying and I don't need it, I don't use 3rd party camera apps, and I guess I'll have to live without boomsound Thanks for the tip, though.

ckpv5 said:
Yeah, same version then after OTA to 2.20.401.1
You can read this - http://forum.xda-developers.com/htc...lp-thread-htc-one-m8s-to-stock-howto-t3190238
and this - http://forum.xda-developers.com/htc-one-m8/one-m8s-general/make-custom-recovery-htc-one-m8s-t3114245
on how to manually install RUU
And for the RUU .. I have to check my PC for the full filename so it is easier to find link. I'll let you know tomorrow (on mobile now)
Click to expand...
Click to collapse
I did a bit of digging, and what I found is this:
0PKVIMG_M8_QL_UL_M60_SENSE70_HTC_Europe_2.10.401.1_Radio_1.0.U20410.1 @ 60201_20.05_018_F_release_479349_combined_signed.zip
which I downloaded from https://ruu.lalleman.net/ -> Firmware (Expert) -> Firmware Crypted (Original HTC)
I'll wait for you to confirm that this is the one that I need, before I continue with the procedure (rename, put to SD, boot to bootloader, fastboot)

does someone have stock marshmallow twrp backup. I accidentally deleted mine and now stuck with cm only

spiderwebmkd said:
I did a bit of digging, and what I found is this:
0PKVIMG_M8_QL_UL_M60_SENSE70_HTC_Europe_2.10.401.1_Radio_1.0.U20410.1 @ 60201_20.05_018_F_release_479349_combined_signed.zip
which I downloaded from https://ruu.lalleman.net/ -> Firmware (Expert) -> Firmware Crypted (Original HTC)
I'll wait for you to confirm that this is the one that I need, before I continue with the procedure (rename, put to SD, boot to bootloader, fastboot)
Click to expand...
Click to collapse
I can't access that site but it is the same file that I have that I got from different link.
Yes .. use that one.

I cant update the firmware either. Stucks at 25% the same. Couldn't solve. Tried to flash the firmware mentioned above. Didnt change. :/
EDit: Nevermind it passed 25% barrier lol. 70% and installing

parser said:
I cant update the firmware either. Stucks at 25% the same. Couldn't solve. Tried to flash the firmware mentioned above. Didnt change. :/
EDit: Nevermind it passed 25% barrier lol. 70% and installing
Click to expand...
Click to collapse
It passed after you flashed the RUU? the same procedure that I'm about to do?

spiderwebmkd said:
It passed after you flashed the RUU? the same procedure that I'm about to do?
Click to expand...
Click to collapse
yep sameway. Downloaded and flashed the firmware after renaming. Downloaded the ota via software update and voila.
took a little long but worked at the and.

parser said:
yep sameway. Downloaded and flashed the firmware after renaming. Downloaded the ota via software update and voila.
took a little long but worked at the and.
Click to expand...
Click to collapse
Worked for me as well. I'm at v2.20 now, so far no app crashes, the "SD card unexpectedly removed" is still there, but I'll live. Thanks a lot @ckpv5 for your suggestion, I practically got a brand new phone now!

spiderwebmkd said:
Worked for me as well. I'm at v2.20 now, so far no app crashes, the "SD card unexpectedly removed" is still there, but I'll live. Thanks a lot @ckpv5 for your suggestion, I practically got a brand new phone now!
Click to expand...
Click to collapse
hey! can you, if you have, send me a clean backup of the v2.20. I kinda rushed in and forgot to take a backup and now I am stuck with cm :/.

parser said:
hey! can you, if you have, send me a clean backup of the v2.20. I kinda rushed in and forgot to take a backup and now I am stuck with cm :/.
Click to expand...
Click to collapse
I don't have a backup of v2.20. I flashed the v2.10 from https://ruu.lalleman.net/ -> Firmware (Expert) -> Firmware Crypted (Original HTC) , and then I downloaded the OTA update on top of it.

spiderwebmkd said:
https://ruu.lalleman.net/ -> Firmware (Expert) -> Firmware Crypted (Original HTC)
Click to expand...
Click to collapse
no no not that. I mean TWRP backup. I dont want to go back to zero relock the phone and flash the zip and re-unlock the phone root again bla bla.
Since you did the same process, I thought maybe you took a backup of the rom after you updated it.
I made a mistake by not taking a backup of it so now it is a problem for me :/
Edit: damn! thanks anyway. I have a long night in front of me clearly. I hate this phone :/

V4A is not working anymore with the latest update. Is it me or everyone has the same problem.

Problem when switching phone on.

Hi guys!
My htc 10 is European s-one with bootloader unlocked and I loaded maximusHD 1.95.401 in it and stock kernel.
The problem is that during night I switch it off and recharge it and when I switch it on again it can restart itself up to 5 times before showing the 3 dots htc logo. Practically it restart the first vibration feed 3 to 5 times, seems like in a bootloop. Is that normal? Thanks for your help!

Up

I have the same problem..i'm s-off..
But I noticed that everything works without sd card..

boccon said:
I have the same problem..i'm s-off..
But I noticed that everything works without sd card..
Click to expand...
Click to collapse
Thanks mate! Good news but not that good..i mean, my card is a brand new samsung 128gb and it's nearly empty. Today it started at first try, yesterday morning it took 5 times. Should I reformat the card in a particular way?

addsfsds said:
Thanks mate! Good news but not that good..i mean, my card is a brand new samsung 128gb and it's nearly empty. Today it started at first try, yesterday morning it took 5 times. Should I reformat the card in a particular way?
Click to expand...
Click to collapse
Most probably something screwed ur sd card up. you should try reformatting it and doing it again.
my guess is that maximus rom had something to do with it.
Hope it fixes ur issue!
Cheers!

CyberTech23 said:
Most probably something screwed ur sd card up. you should try reformatting it and doing it again.
my guess is that maximus rom had something to do with it.
Hope it fixes ur issue!
Cheers!
Click to expand...
Click to collapse
Thanks for helping out! I think i will hold on and wait for Maximus nougat, format the Sd for the occasion and see if that happens again!
Does anyone knows which is the better format type for SD?

addsfsds said:
Thanks for helping out! I think i will hold on and wait for Maximus nougat, format the Sd for the occasion and see if that happens again!
Does anyone knows which is the better format type for SD?
Click to expand...
Click to collapse
I believe that MaximusHD Nougat has been out for a day or two now.

Fun thing, I have the same problem as well.
At first it was scary but then I got used to it.
Also yes, I'm also using 128GB Samsung SD card but I don't know if that's the reason or not.

xunholyx said:
I believe that MaximusHD Nougat has been out for a day or two now.
Click to expand...
Click to collapse
I don't have s-off so I have to wait for a RUU, unfortunately!

BrianKuo1853 said:
Fun thing, I have the same problem as well.
At first it was scary but then I got used to it.
Also yes, I'm also using 128GB Samsung SD card but I don't know if that's the reason or not.
Click to expand...
Click to collapse
Really? It still gets on my nerves...I'll try to format the SD in a different format and see if it makes any difference. Usually how many times does your device restarts when you switch it on?

xunholyx said:
I believe that MaximusHD Nougat has been out for a day or two now.
Click to expand...
Click to collapse
:facepalm: You could turn on the light in this dark and ignorant room but you didn't.

addsfsds said:
I don't have s-off so I have to wait for a RUU, unfortunately!
Click to expand...
Click to collapse
Okay, but as for your format SD question...
If it is less than 32gb format it to FAT32, if it is more than 32gb format it to exfat.
There is an SD formatter from the SD Association that you could try. It'll clean it right up, but you'll need patience while running it. The full format takes a while (like over an hour for larger cards).
You can download that formatter from here. It has worked for a few people I know.
EDIT: You could flash the newest MaximusHD ROM with old firmware if you like, but the fingerprint and home button won't work. Otherwise it'll run fine.

addsfsds said:
Really? It still gets on my nerves...I'll try to format the SD in a different format and see if it makes any difference. Usually how many times does your device restarts when you switch it on?
Click to expand...
Click to collapse
3 usually, 5 at most.
Yeah it's pretty nervous at first, then after a couple of times I just sit back and relax.

xunholyx said:
Okay, but as for your format SD question...
If it is less than 32gb format it to FAT32, if it is more than 32gb format it to exfat.
There is an SD formatter from the SD Association that you could try. It'll clean it right up, but you'll need patience while running it. The full format takes a while (like over an hour for larger cards).
You can download that formatter from here. It has worked for a few people I know.
EDIT: You could flash the newest MaximusHD ROM with old firmware if you like, but the fingerprint and home button won't work. Otherwise it'll run fine.
Click to expand...
Click to collapse
Mine is 128gb and is already exfat formatted...Will try to format it again..thanks for the heads up!
I'll keep waiting for the official ruu..i really need that home button

BrianKuo1853 said:
3 usually, 5 at most.
Yeah it's pretty nervous at first, then after a couple of times I just sit back and relax.
Click to expand...
Click to collapse
Same here, 3 to 5 times!

addsfsds said:
Thanks for helping out! I think i will hold on and wait for Maximus nougat, format the Sd for the occasion and see if that happens again!
Does anyone knows which is the better format type for SD?
Click to expand...
Click to collapse
Your always welcome! i would say try a sd that is of a maximum capacity of 64gb just to be on the safe side.
a couple would be the Sandisk Extreme 64GB or the PNY U3 Turbo 64GB.
Hope this helps ya!