Develop Bugs

Broken screen

I have broken the LCD Screen on my orbit. I am trying to find a replacement screen via the internet - but I am getting the impression that there are are two types of screens and i don't want to waste money on the wrong one - does anyone know how to find out which variation i have without taking the thing apart?and checking the part number on the screen?
Also has anyone replaced their screen - was it relatively straightforward?

Thunderer64 said:
I have broken the LCD Screen on my orbit. I am trying to find a replacement screen via the internet - but I am getting the impression that there are are two types of screens and i don't want to waste money on the wrong one - does anyone know how to find out which variation i have without taking the thing apart?and checking the part number on the screen?
Also has anyone replaced their screen - was it relatively straightforward?
Click to expand...
Click to collapse
You will have to take it apart to fit the new screen any way, so you can check the part numbers then ?

Thanks - I was hoping not to go down that route - but I have done it now, found the part number and ordered the new screen. At least it has given me some experience of taking the unit apart and putting it back to gether again. ... and with mine being the O2 Orbit - the method is slightly different to that posted in the Wiki - so i will try and document the differences and add them to the site.

please share the part number and where to get the replacement
hey Thunderer64 please share the part number and where to get the replacement as my o2 orbit needs a screen replaced too.
thanks

Screen Part Number
There were a series of numbers on the screen as follows:
TX0705APAA3
043S7585249
S/N 9DYA275DS02066
P/N 60H00071-00M
I did a search on e-bay for the first number (TX0705APAA3) and found a number of sellers selling that item. Assuming that all O2 Orbits have the same screen then you should easily find one for sale on e-bay. However the only way to 100% sure is to take the phone apart (quite easily done) and check the part numbers of your screen.
Hope this helps!

Thunderer64 said:
I have broken the LCD Screen on my orbit. I am trying to find a replacement screen via the internet - but I am getting the impression that there are are two types of screens and i don't want to waste money on the wrong one - does anyone know how to find out which variation i have without taking the thing apart?and checking the part number on the screen?
Also has anyone replaced their screen - was it relatively straightforward?
Click to expand...
Click to collapse
Hello, when I buy my second-hand Orbit, I did it a general cleaning, I completely disarming my cell and there I realized that uses this type of display:
Code:
http://global.ebay.com/gbh/viItem?ItemId=110233606094
Now I disarm my orbit three times and still function hahaha Its easy than disarm a Artemis I think:
View this thread:
Code:
http://www.modaco.com/content/HTC-Artemis-Love-Artemis-MoDaCo-com/260167/Disassemble-XDA-Orbit/
Regards

[Q] Touch Pro 2 Digitizer Replacement! Please Help!

Hi, I have a TP2 with a broken digitizer. Dropped it a couple days ago and it's spiderweb cracked across the whole screen. The LCD work just fine, as I can still see everything clearly(except for the tiny cracks) but I can't use the touch screen, which maybe one of the most annoying things I have ever delt with. I wanted to know if anyone on this forum has any kind of digitizer replacement guide for TP2, and even better a video on it. Also, if anyone was interested in repair work for payment via paypal, I would be interested in talking to you. I could provide you with the phone(of course) and the replacement digitizer, along with the S&H on the phone for both ways. I havent found much on the subject anywhere else, and I have always found this site very useful dating back to my first HTC Wizard. I appreciate any help you have to give.
Thanks in advance

Namashkaar McJew,
Any luck ? I thought it would be easier for you to get it fixed at USA.
It is quite difficult to get digitizers in India for TP2 . Only if I can get hold of a digitizer I could have fixed it for you for no extra cost.
Wish you luck.
Regards

[Q] Touch Pro 2 Repair

Hi, I own an unlocked GSM touch pro 2, it's physical appearance is nowhere near new, I was interested in getting a new phone until I found this website and discovered custom roms, I now love this phone and wish to keep it. But the main point of this thread is that I found new housing for my device, but have no knowledge in switching the housing myself. Does anyone know the difficulty of this, or a service where I can send my phone in with the replacement housing for them to do it for me?

Try this...
http://translate.google.co.uk/trans...ka/htc_touch_pro2/&sl=ru&tl=en&hl=en&ie=UTF-8

EricDaSqueegee said:
Hi, I own an unlocked GSM touch pro 2, it's physical appearance is nowhere near new, I was interested in getting a new phone until I found this website and discovered custom roms, I now love this phone and wish to keep it. But the main point of this thread is that I found new housing for my device, but have no knowledge in switching the housing myself. Does anyone know the difficulty of this, or a service where I can send my phone in with the replacement housing for them to do it for me?
Click to expand...
Click to collapse
See if you can still get this download:
http://forum.xda-developers.com/showthread.php?t=595996
Major kudo's to commonwarrior who provided the manuals so freely - they're good to have, thanks commonwarrior.
I attached what I have as copy if the thread doesnt avail. hopefully the two .rar will help.

[Q] Touchscreen Issue (not typical circumstances)

Hey everyone,
I'm a relatively new Wildfire S owner (wanted to test out T-Mobile's new walmart plan). The touchscreen doesn't work for the most part, but every once in a while it becomes responsive for about 3 seconds. It only wants to work after I've swiped continuously on the screen in random directions for a few seconds and then it becomes responsive. Sometimes it works if I apply pressure to the edges of the screen as well.
The phone came with a stock T-Mobile ROM, and I immediately updated it to the newest Gingerbread stock. Still had issues.
I then installed CM7.2, and the issue is still there.
I then tried the screen freezing fix provided by mstfkaratas. Issue is still there.
The only thing left I can think of is the digitizer is bad. Is this a good assumption, or is there something else I can try?
Thanks in advance.

I had simmular issues when i got my mobile phone(freezing after unlock for 4 sec's on right side of the device).
After i changed rom's and did fix by mstfkaratas i dont have them anymore so i think you need to replace your digitizer and there os nothing more you can do as far as i know

If that is the only solution, can you recommend a safe place to buy one? (i.e. no fake parts or scammers). There are tons of eBay sellers, but I don't know what to look for to see if the part's any good.
*edit* I only paid about $50 for this phone, so i was expecting something like this would be necessary. Adding the cost of a digitizer is still cheaper than what the phone usually goes for used.

I just replaced the digitizer... and it still doesn't work. Double-checked the connections at least three times

I think we're on the same boat. One way I could manage to fix it is by locking then unlocking the phone, then the screen will be responsive.

try this tutorial, it should work for you
http://forum.xda-developers.com/showthread.php?t=1436314
Sent from my HTC Wildfire S using Tapatalk

thanks for the responses. the diag fix didn't work, so i sold the phone on ebay for parts. got almost what i paid for it, actually. ended up getting a used hd2 and putting android on it.
Sent from my HTC HD2 using XDA

Need help regarding parts

I just noticed today the volume buttons are MISSING from my phone. No idea what happened to them. I need new ones. Can I order them? do I need to order a whole new casing?

you can get them on ebay

Indeed they are. Thanks.