Develop Bugs

Root after 4.1.1 OTA Update?

How can i root an s3 t999v (wind) after doing the ota update for 4.1.1 jellybean?
Can i just follow the same steps used for the ICS guides?
If anyone could share a link to a guide that would be great.

Yes.

Aerowinder said:
Yes.
Click to expand...
Click to collapse
So do i have downgrade to 4.0.4 first?
If so how?

chromium96 said:
So do i have downgrade to 4.0.4 first?
If so how?
Click to expand...
Click to collapse
Use this http://forum.xda-developers.com/showthread.php?t=1949687

kitila said:
Use this http://forum.xda-developers.com/showthread.php?t=1949687
Click to expand...
Click to collapse
so i need to download the 4.0.4 firmware from that thread, and flash it in odin.
Then i need to follow the normal root method video?
Also which firmware should i download for a stock t999v wind s3? There are so many.
Thanks

chromium96 said:
so i need to download the 4.0.4 firmware from that thread, and flash it in odin.
Then i need to follow the normal root method video?
Also which firmware should i download for a stock t999v wind s3? There are so many.
Thanks
Click to expand...
Click to collapse
Why do you think you would have to downgrade? Why would you downgrade to ICS, root, then update to JB, losing root again?
Just flash CWM/TWRP with recovery and flash Superuser with chosen recovery. The t999v is d2can right? Just for reference, your firmware should be on this page: http://www.sammobile.com/firmwares/1/?model=SGH-T999V&pcode=VTR#firmware, assuming you are on Videotron.

Aerowinder said:
Why do you think you would have to downgrade? Why would you downgrade to ICS, root, then update to JB, losing root again?
Just flash CWM/TWRP with recovery and flash Superuser with chosen recovery. The t999v is d2can right? Just for reference, your firmware should be on this page: http://www.sammobile.com/firmwares/1/?model=SGH-T999V&pcode=VTR#firmware, assuming you are on Videotron.
Click to expand...
Click to collapse
im on wind with a t999v
the reason i was asking to downgrade was because in this guide:
http://forum.xda-developers.com/showthread.php?t=1775616
it says that in order to follow the steps, you must first restore the stock ics firmware.
what i want to do is:
-install cwm
-flash superuser using cwm
-then maybe later a custom rom
Is it necessary to downgrade?
If it isnt can someone show me a step by step guide that shows you how to root/install cwm while on 4.1.1
Thanks

chromium96 said:
im on wind with a t999v
the reason i was asking to downgrade was because in this guide:
http://forum.xda-developers.com/showthread.php?t=1775616
it says that in order to follow the steps, you must first restore the stock ics firmware.
what i want to do is:
-install cwm
-flash superuser using cwm
-then maybe later a custom rom
Is it necessary to downgrade?
If it isnt can someone show me a step by step guide that shows you how to root/install cwm while on 4.1.1
Thanks
Click to expand...
Click to collapse
Just flash the latest root66 in Odin and you will be updated with root. If you want a custom recovery, download goo manager from the play store to flash TWRP recovery.

Towle said:
Just flash the latest root66 in Odin and you will be updated with root. If you want a custom recovery, download goo manager from the play store to flash TWRP recovery.
Click to expand...
Click to collapse
where can i get root66? and what are the steps needed to flash it with odin?

Ok i just found this:
http://forum.xda-developers.com/showthread.php?t=1771687&highlight=4+1+1
Would this work:
-Download the prerooted 4.1.1 wind odin tar
-Flash it using odin
-Download ROM manager and install CWM from there

chromium96 said:
Ok i just found this:
http://forum.xda-developers.com/showthread.php?t=1771687&highlight=4+1+1
Would this work:
-Download the prerooted 4.1.1 wind odin tar
-Flash it using odin
-Download ROM manager and install CWM from there
Click to expand...
Click to collapse
You don't need to reinstall an entire rom, thats way too much work.
This is the easiest method I have found.
http://androidjinn.com/how-to-root-galaxy-s3-t999-uvdlja-android-4-1-1-jelly-bean-firmware.html/2
Flash the autoroot package from that article, and you are rooted. Then once you are rooted, you can then install a custom recovery with something like Rom Toolbox from within android.

ArkAngel06 said:
You don't need to reinstall an entire rom, thats way too much work.
This is the easiest method I have found.
http://androidjinn.com/how-to-root-galaxy-s3-t999-uvdlja-android-4-1-1-jelly-bean-firmware.html/2
Flash the autoroot package from that article, and you are rooted. Then once you are rooted, you can then install a custom recovery with something like Rom Toolbox from within android.
Click to expand...
Click to collapse
Thanks that looks good. I just have a couple of questions.
This guide is for the t999. I have the t999v, does it matter?
Also the guide is meant for s3 running T999UVDLJA firmware.
Is there somewhere i should check to confirm that is what i have?
Btw i have a wind mobile s3 if that helps,
Thanks.

nevermind, i used the root66 method
and i am now succesfully rooted

[Canada][Bell/Telus/Rogers/etc] i747m Android 4.3 Jelly Bean available + root method

:victory: Good news, Android 4.3 Jelly Bean for the Canadian i747m is here!! :victory:
Android version : 4.3
Version number / Baseband : I747MVLUEMK5
Kernel version : 3.0.31-2140838​
Click to expand...
Click to collapse
Thanks to @hyelton who provided fast mirrors to, as of now, Bell, Telus, Rogers and Koodo images
http://storagecow.eu/index.php?dir=Xda/Galaxy+S3/Stock+Roms/4.3/Canada/
Old links below. They still work, but are awfully slow!
Bell image
SamMobile.com: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=BMC#firmware
samsung-updates.com: http://samsung-updates.com/details/16400/Galaxy_S_3_North_America/SGH-I747M/BMC/I747MVLUEMK5.html​
Click to expand...
Click to collapse
If you are running stock, check if an OTA is available for you.
If not, you can alway get it from sammobile.com or samsung-updates.com... links to official firmwares below.
Please note, we are missing Virgin image links!
If you're looking for pre-rooted & deodexed CWM/TWRP flashable versions (with or without KNOX), please look at @kriEv thread here
Guys, please keep all canadian i747m 4.3 Jelly Bean discussions here so that we do not clutter the forum with useless threads.
Rogers image
SamMobile.com: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=RWC#firmware
samsung-updates.com: http://samsung-updates.com/details/16401/Galaxy_S_3_North_America/SGH-I747M/RWC/I747MVLUEMK5.html​
Click to expand...
Click to collapse
Telus image
SamMobile.com: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=TLS#firmware
samsung-updates.com: http://samsung-updates.com/details/16404/Galaxy_S_3_North_America/SGH-I747M/TLS/I747MVLUEMK5.html​
Click to expand...
Click to collapse
Koodo image
SamMobile.com: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=KDO#firmware
samsung-updates.com: n/a​
Click to expand...
Click to collapse
Fido image
SamMobile.com: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=FMC#firmware
samsung-updates.com: n/a​
Click to expand...
Click to collapse
Sasktel image
SamMobile.com: http://www.sammobile.com/firmwares/1/?model=SGH-I747M&pcode=BWA#firmware
samsung-updates.com: http://samsung-updates.com/details/16403/Galaxy_S_3_North_America/SGH-I747M/BWA/I747MVLUEMK5.html​
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Odin
[ODIN] Desktop ODIN ver 3.07 for use with Samsung Galaxy S III​
Click to expand...
Click to collapse
Installation & root method with CF-Root by @SkyboneNoya
Update:
If you already have a custom recovery installed :
Make a recovery backup of your current rom
(to restore to after you get a custom recovery installed and save it to your computer as well as backing up all SD cards... It’s just a good practice.)
If coming from any other ROM than stock 4.1.2 :
Install 4.1.2 update with odin via SamMobile.com
Clear data/cache/dalvik in recovery (or hang on the Samsung logo for the night).
Upgrade to 4.3 OTA or via Odin
Hint : Use provided links to your carriers images above!
Root method
Go to [SGH-I747/M] CF-Auto-Root|
Follow the steps on post 2 in that thread.
Once rebooted: open up SuperSU, click OK then normal and reboot.
I used the KNOX uninstaller and when trying to restore back to stock I had google apps issue warning locking me out of the system. So use at your own discretion.
You should be good to go.
The rest is pretty easy.
Also, you might have trouble installing custom roms at this point. I747MVLUEMK5 is probably not listed in the installers yet. That's a whole other story.
Other options here as well if the above didn’t work for you. |Guide|How-To| Root & Install Custom Recovery for 4.3 Update |22 Nov 2013|
To enable USB debugging through Developer Options, go in System Settings/About and click on build number about 7 times. (old google trick if you didn’t know)
PS. Thanks and donations to Chainfire and other helping community members creating these easy to find threads for us should be common cents ​
Click to expand...
Click to collapse
WARNING : Carrier IQ seems to be present for all 3 major carriers as found here by @DexedrineXR
UPDATE : @D0T-C0M got an answer from Fido, who asked Samsung directly, stating that no phone sold in Canada has Carrier IQ installed.
Source here
DISCLAIMER : I am not responsible for bricked devices, dead SD cards or whatever happens to your phone. You are expected to know what you are doing when attempting to flash your phone.​

Thanks! Just waiting for a pre rooted telus version to pop up on here now
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Yeah, same thing here ... and also wait for the day at the office to be over.
And it's only 8h25 am... damn! lol

I wonder if we are going to run into the same downgrade problems that the At&t ota had.
Can anybody who updated post a screen shot of their about screen in settings please?
Sent from my SGH-I747M using xda app-developers app

Just completed the update. So far, so good.
Some minor (but nice) visual enhancements, speed is at least as good as before, nothing to complain about but nothing groundbreaking (but nobody was expecting that from 4.3).
Can't post a screeshot right now but baseband is mk5 and kernel is 3.0.31-2140838
I updated with kies and I'm with Rogers.
I haven't done a factory reset (like I usually do after a major update) but the responsiveness of my phone makes me believe it may not be necessary. Time will tell.

updating right now 555.85mb download

Stupid queation... Can i flash the zip through twrp.? Or do i nees to go back to stock unrooted state to get this update.?
Sent from my SGH-I747M using Tapatalk

TKG26 said:
Stupid queation... Can i flash the zip through twrp.? Or do i nees to go back to stock unrooted state to get this update.?
Click to expand...
Click to collapse
If you are stock, unrooted, you'll easily update over the air.
If you're going the factory image way using of the above links, you'll need to use either Odin or Mobile Odin.

Ok thanks.
Ill fireup odin tonight im on 4.1.2 rooted rom now.
Sent from my SGH-I747M using Tapatalk

HiKsFiles said:
If you are stock, unrooted, you'll easily update over the air.
If you're going the factory image way using of the above links, you'll need to use either Odin or Mobile Odin.
Click to expand...
Click to collapse
i was on 4.1.2 rooted and did the OTA

Going to try see if Fido has the update on stock or then just flash rogers. Is this advisable or no? Same network so..
Edit: there's fido right here http://www.sammobile.com/firmwares/

im on quntum rom kitkat right now,can i flash this with odin? or i have to install 4.1.2 first¿?

fr3d0x said:
im on quntum rom kitkat right now,can i flash this with odin? or i have to install 4.1.2 first¿?
Click to expand...
Click to collapse
Using Odin to go back to 4.1.2 Fido here. Pick whatever carrier 4.1.2 you need from Firmwares.
http://www.sammobile.com/firmwares/
Had to go into recovery which I still had after flashing 4.1.2 over odin. Wiped data/cache and reboot.
Downloaded installed 4.3 OTA Just going to try gain root and see how it goes.

Updating the baseband
Hi, I am running my s3 i747m fido on Quantum Rom V3 RC3 kitkat 4.4. I was wondering can i flash the Fido baseband using recovery. (I have Clockwork Mod for my recovery screen). Or do I need to go back to stock to do this first?
thanks

Was on quantam, downloaded this and flashed it via odin, installed fine but taking forever to boot just samsung and the led is blue

what if I use only clockworkmod to flash it? Will it brick my phone ?
Also I bought the phone from Rogers but I am using it with Fido. Which baseband should I use Fido or Rogers?

entheogenx said:
what if I use only clockworkmod to flash it? Will it brick my phone ?
Also I bought the phone from Rogers but I am using it with Fido. Which baseband should I use Fido or Rogers?
Click to expand...
Click to collapse
The files on sammobile are full firmware files, which include bootloader, modem etc. You can use kies or odin to flash them but i don't think you can through cwm.
I'd use the Rogers firmware if it was me, but I can't be sure.
Sent from my SGH-T999 using xda app-developers app

has anyone who wasnt on stocked used odin to flash this without flashing 4.1.2 first????

My post above explains how to get 4.3 ota from quantum 4.4 I've yet to try gain root.
fr3d0x said:
im on quntum rom kitkat right now,can i flash this with odin? or i have to install 4.1.2 first¿?
Click to expand...
Click to collapse
Using Odin to go back to 4.1.2 Fido here. Pick whatever carrier 4.1.2 you need from Firmwares.
http://www.sammobile.com/firmwares/
Had to go into recovery which I still had after flashing 4.1.2 over odin. Wiped data/cache and reboot.
Downloaded installed 4.3 OTA Just going to try gain root and see how it goes.
Click to expand...
Click to collapse
Andrew_han said:
Was on quantam, downloaded this and flashed it via odin, installed fine but taking forever to boot just samsung and the led is blue
Click to expand...
Click to collapse
Try get into recovery and wipe data/cache
entheogenx said:
what if I use only clockworkmod to flash it? Will it brick my phone ?
Also I bought the phone from Rogers but I am using it with Fido. Which baseband should I use Fido or Rogers?
Click to expand...
Click to collapse
Use whatever firmware you got with the phone. Rogers would come with Rogers.

Thanks for the replies.
Because I am not too familiar with Odin, If I go back to stock and install the 4.3 firmware via OTA then root the phone and install Quantum Rom will the firmware still be updated? Sorry if it is a newb questions.
Thanks.

Help for first time Note 2 user.

Hello. I just ordered my galaxy note 2 N7100 Int. version(not the n7105 lte one). I live in Greece and the phone should have arrived by 15-20 January. Even though I'm not an android noob and im using android for 2-3 years and made my own ROMs as well, I have no clue how Samsung phones work. So I would like a detailed guide please about the steps I'm will mention:
*What is the latest official firmware I can install on my N7100? How can I do that?(I'm not familiar with OTA's)
*How can I root that firmware? What is the best option for rooting it?(chainfire etc but give details on how to do it with those methods)
*Do I need to unlock my bootloader to install custom recovery and flash a rom?If so how can I do that?
*Is Philz recovery fully working and compatible with 4.4+ ROMs? If so how can I install it? If not whats the best recovery with support for 4.4+ ROMs?
*What is the best ROM with the features of Note 3?(stable no bugs good for gaming) How can I install that ROM?
*What is the best 4.4 ROM?(stable no bugs good for gaming) How can I install that ROM?
*How do I backup my IMEI?
*What is the procedure to install a ROM?(on my old phone it was : 1)Backup 2)Factory reset 3)Wipe cache,dalvik cache, system, data, and again format cache 4)Install ROM 5)Install GAPPS and reboot. Done. Are there any differences here?
I wont buy a new phone for the next 1-2 years at least so I wont my new phone to be safe when playing with custom ROMs. If you are about to comment without a detailed guide or at least telling me where to look for that guide dont comment at all, it wont help me.Thanks in advance and sorry for the trouble.

Too many questions to answer and therefore I recommend to go to the Development section for further information. Each Rom has its own install instructions, just read there and learn more about your device :good:
You can't get spoonfed here, sorry mate.

To try to answer just a few... really too many questions, you need to read a bit before posting so many questins
*What is the latest official firmware I can install on my N7100? How can I do that?(I'm not familiar with OTA's)
MKD - Indian, MK9 - european, ML3 - asian. They all work on any int 7100 model.
*Do I need to unlock my bootloader to install custom recovery and flash a rom?If so how can I do that?
You just have to root.
*What is the best ROM with the features of Note 3?(stable no bugs good for gaming) How can I install that ROM?
Most popular are DN3 and Phoenix (also maybe DR Ketan's custom ROM, but it isn't developed anymore). I personaly use Criskelo which is really stable and smooth.
*What is the procedure to install a ROM?(on my old phone it was : 1)Backup 2)Factory reset 3)Wipe cache,dalvik cache, system, data, and again format cache 4)Install ROM 5)Install GAPPS and reboot. Done. Are there any differences here?
In Phils's recovery (I recommend v 5.15, not v 6.x - because of Aroma bug) you do "prepare for ROM flashing" and then flash ROM. Erasing dalvik/system/cache etc can't hurt but is not necessary, all is done in one go. From ODIN - go to download mode, connect to PC, run ODIN and select md5 file to flash.

dalanik said:
To try to answer just a few... really too many questions, you need to read a bit before posting so many questins
*What is the latest official firmware I can install on my N7100? How can I do that?(I'm not familiar with OTA's)
MKD - Indian, MK9 - european, ML3 - asian. They all work on any int 7100 model.
*Do I need to unlock my bootloader to install custom recovery and flash a rom?If so how can I do that?
You just have to root.
*What is the best ROM with the features of Note 3?(stable no bugs good for gaming) How can I install that ROM?
Most popular are DN3 and Phoenix (also maybe DR Ketan's custom ROM, but it isn't developed anymore). I personaly use Criskelo which is really stable and smooth.
*What is the procedure to install a ROM?(on my old phone it was : 1)Backup 2)Factory reset 3)Wipe cache,dalvik cache, system, data, and again format cache 4)Install ROM 5)Install GAPPS and reboot. Done. Are there any differences here?
In Phils's recovery (I recommend v 5.15, not v 6.x - because of Aroma bug) you do "prepare for ROM flashing" and then flash ROM. Erasing dalvik/system/cache etc can't hurt but is not necessary, all is done in one go. From ODIN - go to download mode, connect to PC, run ODIN and select md5 file to flash.
Click to expand...
Click to collapse
Hey @dalanik thanks for your quick answer. I have some more questions for you. First of all, are 4.4+ roms stable for this phone for daily use and gaming? Is Philz recovery 5.15 compatible with 4.4+ roms? How do I root my device(latest official firmware) and how do I use ODIN(why is odin needed, what is odin doing)?What about backing up my IMEI? Thanks in advance.

I haven't tried 4.4 ROMs so I don't knpw. As for rooting just have a look at the forum there are several threads on rooting. Odin flashes ROMs.
Sent from my GT-N7100 using xda premium

dalanik said:
I haven't tried 4.4 ROMs so I don't knpw. As for rooting just have a look at the forum there are several threads on rooting. Odin flashes ROMs.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
What should I use to flash roms, odin or recovery(twrp, cwm etc)?

Actually Odin can be used to flash I.e. bootloader which recovery can't. Odon is used to flash official Samsung stock ROMs in md5 format while recovery is used fir custom ROMs mostly with the Aroma installer.
Sent from my GT-N7100 using xda premium

dalanik said:
Actually Odin can be used to flash I.e. bootloader which recovery can't. Odon is used to flash official Samsung stock ROMs in md5 format while recovery is used fir custom ROMs mostly with the Aroma installer.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
So to flash Phoenix ROM or DN3 or any KK ROM I dont need ODIN correct?

I think if youre on 4.1.2 you need to flash new bootloader. Each rom has instructions so hav3 a look at rom thread
Sent from my GT-N7100 using xda premium

First when arrives your phone see the firmware version, if it has 4.3 and flash custom recovery firmware etc you loose your warranty and for the moment is not possible to take warranty back. If your firmware is 4.1.2 the things are more simple you can flash everything (except 4.3 official bootloader also 4.3 official firmware witch includes bootloader) and have when you need your warranty back.
All your answers are in the forum search for start dr.ketan threads. You can start from here (old thread but very good writed for 4.1.2 there are some differences with 4.3 you have to check before act for example mobile Odin trigger the warranty at 4.3 also triangle away cannot affect knox etc etc)
http://forum.xda-developers.com/showthread.php?t=1896696
he has plenty of guides solutions etc and I think you will find many answers for your questions. Now if your phone is at 4.1.2 firmware and you want to flash 4.3, root etc or 4.3 custom rom (not all) repost to guide you how to flash and also have your warranty back.
Kaloriziko.
Sent from my GT-N7100 using Tapatalk 2

vagsvag said:
First when arrives your phone see the firmware version, if it has 4.3 and flash custom recovery firmware etc you loose your warranty and for the moment is not possible to take warranty back. If your firmware is 4.1.2 the things are more simple you can flash everything (except 4.3 official bootloader also 4.3 official firmware witch includes bootloader) and have when you need your warranty back.
All your answers are in the forum search for start dr.ketan threads. You can start from here (old thread but very good writed for 4.1.2 there are some differences with 4.3 you have to check before act for example mobile Odin trigger the warranty at 4.3 also triangle away cannot affect knox etc etc)
http://forum.xda-developers.com/showthread.php?t=1896696
he has plenty of guides solutions etc and I think you will find many answers for your questions. Now if your phone is at 4.1.2 firmware and you want to flash 4.3, root etc or 4.3 custom rom (not all) repost to guide you how to flash and also have your warranty back.
Kaloriziko.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Hello @dalanik, @vagsvag I just got my Note 2(Italy version) GT-N7100. Here's the details from the settings menu
*Android 4.1.2(gives me the ability to update to 4.3)
*Baseband N7100XXDMF1
*Kernel 3.0.31-1071214
*Build number JZO54K.N7100XXDME6
The phone is COMPLETELY stock, no root no custom recovery nothing. Can you please give me full instructions on how to install this ROM please?

About 4.4 ROMs, i have tried them.
Things that don't work:
- Bluetooth ear piece???
- Camera is not 100% stable
- I don't have sound when recording videos (Could be just me, no one else is mentioning it )
- Bad FPS in games (tried many kernels and governors, still bad. AGAIN, could be just me, no one else is mentioning it )
And that's it.
For DN3
- Root
- Flash recovery (TWRP my choice)
- Full wipe (data,system,internal storage,cache)
- Flash DN3 (you will now get a bootloop)
- Flash it ONE MORE TIME,
There is something wrong with AROMA installer, if you look closely it doesn't install the ROM for the 1st time, hence the bootloop.
Also, you DON'T NEED TO FLASH the new bootloader. I'm on the DMG1 bootloader and i'm running DN3.
If you don't flash the bootloader, you have to flash the Wi-Fi fix, to get the Wi-Fi working.
You may also experience a reboot once in a week or 2 weeks, it's random.
I personally don't want to flash the BL, because i'm terrified of ODIN. I have a bad history with it :laugh:

Mashed_Potatoes said:
About 4.4 ROMs, i have tried them.
Things that don't work:
- Bluetooth ear piece???
- Camera is not 100% stable
- I don't have sound when recording videos (Could be just me, no one else is mentioning it )
- Bad FPS in games (tried many kernels and governors, still bad. AGAIN, could be just me, no one else is mentioning it )
And that's it.
For DN3
- Root
- Flash recovery (TWRP my choice)
- Full wipe (data,system,internal storage,cache)
- Flash DN3 (you will now get a bootloop)
- Flash it ONE MORE TIME,
There is something wrong with AROMA installer, if you look closely it doesn't install the ROM for the 1st time, hence the bootloop.
Also, you DON'T NEED TO FLASH the new bootloader. I'm on the DMG1 bootloader and i'm running DN3.
If you don't flash the bootloader, you have to flash the Wi-Fi fix, to get the Wi-Fi working.
You may also experience a reboot once in a week or 2 weeks, it's random.
I personally don't want to flash the BL, because i'm terrified of ODIN. I have a bad history with it :laugh:
Click to expand...
Click to collapse
@Mashed_Potatoes thanks for your reply but please make things a little bit more detailed..
- Root -- how can I root my device? Link?
- Flash recovery (TWRP my choice)? I want Philz recovery. How do I flash it? Is there any problems with flashing DN3 with Philz recovery?
-What are the prerequisites to get DN3 ROM to work FULLY? Have you noticed any important bugs while using it? What bootloader do I have to flash to get DN3 ROM to work? How can I flash that bootloader? Remember I'm on stock 4.1.2
-How can I access Recovery on this phone?

NickVXD said:
@Mashed_Potatoes thanks for your reply but please make things a little bit more detailed..
- Root -- how can I root my device? Link?
- Flash recovery (TWRP my choice)? I want Philz recovery. How do I flash it? Is there any problems with flashing DN3 with Philz recovery?
-What are the prerequisites to get DN3 ROM to work FULLY? Have you noticed any important bugs while using it? What bootloader do I have to flash to get DN3 ROM to work? How can I flash that bootloader? Remember I'm on stock 4.1.2
-How can I access Recovery on this phone?
Click to expand...
Click to collapse
You need to use the search option.
http://forum.xda-developers.com/showthread.php?t=2143479 - How to root
http://www.youtube.com/watch?v=RKfURLDlCRg - How to flash recovery
I don't know about Philz i had it before TWRP but that was before DN3 existed =D
I found no bugs in DN3, its a bit slower than 4.1.2 and the ram usage is higher
You flash the bootloader through ODIN too but i cant help you about that i don't know
Once you root your phone download an app called Quick Boot which will allow you to access Download and Recovery modes with one click

Hey guys I need a little bit more help.
 @Androidwizzard @dalanik @vagsvag
I successfully rooted my device with CF and ODIN and now I installed latest Philz recovery as well.
One last question.. I'm now on official 4.1.2(again xD)and like I have said again I want to install DN3 ROM.. What bootloader do I need to flash to get DN3 to work?How do I know what bootloader Im using right now?
What I think the procedure is
1)Install 4.3 bootloader while running 4.1.2
2)Make a backup with Philz recovery
3)Full wipe and install 4.3 DN3 ROM.
Is this correct? Dont forget to answer the other things I asked you!! Thanks in advance!!

NickVXD said:
Hey guys I need a little bit more help.
@Androidwizzard @dalanik @vagsvag
I successfully rooted my device with CF and ODIN and now I installed latest Philz recovery as well.
One last question.. I'm now on official 4.1.2(again xD)and like I have said again I want to install DN3 ROM.. What bootloader do I need to flash to get DN3 to work?How do I know what bootloader Im using right now?
What I think the procedure is
1)Install 4.3 bootloader while running 4.1.2
2)Make a backup with Philz recovery
3)Full wipe and install 4.3 DN3 ROM.
Is this correct? Dont forget to answer the other things I asked you!! Thanks in advance!!
Click to expand...
Click to collapse
There is only ONE bootloader you can flash that is KNOX-Free, and that is MJ5. All other bootloaders have KNOX. Do not use Wi-Fi fix as that will fix your Wi-fi but may introduce instability, reboots, etc. Well, not the Fix, the fix is fine, but the rest of the old bootloader. Just flash MJ5.
I'd do backup FIRST and then flash bootloader.

dalanik said:
There is only ONE bootloader you can flash that is KNOX-Free, and that is MJ5. All other bootloaders have KNOX. Do not use Wi-Fi fix as that will fix your Wi-fi but may introduce instability, reboots, etc. Well, not the Fix, the fix is fine, but the rest of the old bootloader. Just flash MJ5.
I'd do backup FIRST and then flash bootloader.
Click to expand...
Click to collapse
What is KNOX? If I flash MJ5 while running 4.1.2 and then flash DN3 are there going to be any problems?(instabilities wifi issues etc)Also how do I backup my bootloader? And what bootloader am I running now?

NickVXD said:
Hey guys I need a little bit more help.
I successfully rooted my device with CF and ODIN and now I installed latest Philz recovery as well.
One last question.. I'm now on official 4.1.2(again xD)and like I have said again I want to install DN3 ROM.. What bootloader do I need to flash to get DN3 to work?How do I know what bootloader Im using right now?
What I think the procedure is
1)Install 4.3 bootloader while running 4.1.2
2)Make a backup with Philz recovery
3)Full wipe and install 4.3 DN3 ROM.
Is this correct? Dont forget to answer the other things I asked you!! Thanks in advance!!
Click to expand...
Click to collapse
FIRST of ALL: Don't use the latest Philz, RUN 5.15 is the best way to flash 4.3 custom roms with Aroma installer!
As mentioned: You got to take MJ5 if you ever want to go back to stock 4.1.2 at any time, besides you won't have wifi issue.
Only way to change bootloader: PC Odin.
Befor starting to install a custom rom read the instructions on the OP of the desired rom. There you find all necessary wipes to do :good:

Androidwizzard said:
FIRST of ALL: Don't use the latest Philz, RUN 5.15 is the best way to flash 4.3 custom roms with Aroma installer!
As mentioned: You got to take MJ5 if you ever want to go back to stock 4.1.2 at any time, besides you won't have wifi issue.
Only way to change bootloader: PC Odin.
Befor starting to install a custom rom read the instructions on the OP of the desired rom. There you find all necessary wipes to do :good:
Click to expand...
Click to collapse
@Androidwizzard so to flash DN3 ROM this is what I have to do:
1)Flash Philz 5.15 recovery with ODIN
2)Flash MJ5 bootloader while running official 4.1.2
3)Make a backup of current with recovery
4)Make the necessary wipes with recovery and flash DN3 ROM
Is everything I mentioned above correct?
Also how do I go back COMPLETELY stock if I ever want?
And btw is DN3 ROM good for games? I play lots of heavy games like GTA:SA etc..
Thanks A LOT guys for helping me, I know I'm annoying but I'm really new to Samsung and this all seems really strange

NickVXD said:
@Androidwizzard so to flash DN3 ROM this is what I have to do:
1)Flash Philz 5.15 recovery with ODIN
2)Flash MJ5 bootloader while running official 4.1.2
3)Make a backup of current with recovery
4)Make the necessary wipes with recovery and flash DN3 ROM
Is everything I mentioned above correct?
Also how do I go back COMPLETELY stock if I ever want?
And btw is DN3 ROM good for games? I play lots of heavy games like GTA:SA etc..
Thanks A LOT guys for helping me, I know I'm annoying but I'm really new to Samsung and this all seems really strange
Click to expand...
Click to collapse
Here you find all you need from the godfather Dr Ketan:
http://forum.xda-developers.com/showpost.php?p=48032704&postcount=4753
There are several links and guides, :good:

Flash stock rom - Keep Root & CWM

Hello, I am currently rooted and have CWM 6.0.4.3. installed. I'm on CM11 but want to go back to stock.. Is there an easy way to keep root and go back to stock. Want stock for a few functions that ROMS dont seem to be offering but can keep root and CWM ??
Thanks.

Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.

Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins

DeathNotice said:
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
Click to expand...
Click to collapse
Ok perfect, thats what I was looking for. Phone btw is S3 - d2att - SGH i747) Sounds good to install the stock rom and re-root.. I'm sure its here but I have searched everywhere to find a tutorial on this and I cannot find a straight answer.
Would you mind giving me the steps or pointing me to a thread that explains how to and has the files in need to download ?

audit13 said:
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Click to expand...
Click to collapse
Do you know if there is a step by step on this somewhere ? I dont mind going back to complete stock.. I can just re-root and flash CWM after.
OR
Maybe you could just answer the bigger question : the reason I want to go back to stock is I need to use MHL/HDMI which CM11 doesnt support. I dont want to go back to stock, I would rather even go to another ROM that supports mhl/hdmi.. but if I have to go to stock, than so be it.?

Were you running the stock AT&T 4.3 ROM before you switched to CM11?

audit13 said:
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
Click to expand...
Click to collapse
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.

robberrobbie said:
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
Click to expand...
Click to collapse
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426

audit13 said:
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?

robberrobbie said:
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
Click to expand...
Click to collapse
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att

audit13 said:
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
Ok thanks, I will do that. 1 thing I'm not quite sure of is the bootloader situation ? In the first tutorial there is a note : Flashing a prior bootloader can hard/soft brick your device. How do I know ?
I see the steps as:
Extract tar file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the tar file
Leave Auto Reboot and F. Reset Time checked.
click start and when done let phone reboot.
If you just want a stock, rooted phone with no custom recovery, no plans to flash custom roms, etc. then you can stop HERE.
For my situation, is it just that easy ?

Before flashing, verify the version of your bootloader.

audit13 said:
Before flashing, verify the version of your bootloader.
Click to expand...
Click to collapse
OK I have made an effort to go read and figure out how to find out what version of bootloader on my own.. But i cannot find ? Any chance you know... And could help?

You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?

Hey. I got the i747m. As for what was the last stock ROM I had, can't say. I know when I bought the phone it was ICS and I had received and update to jellybean.. But them went to cm10. The tutorial I followed told me had me back everything up, which I did. Have it in a file somewhere on my comp, would that tell me ?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

Ariesdroid said:
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not seen a stock mf1 ROM that can be flashed in CWM. You could use mobile Odin to flash back to stock and then flash Philz Touch via desktop Odin later.

OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?

audit13 said:
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Click to expand...
Click to collapse
Hey there Audit, Sorry to bother you again, I just dont know how to move forward from here and neeeeeed some help.
I have been reading for days and days have not found a straight answer for my issue and I dont want to just go ahead and start flashing when I dont know if its the right method ?
I dont know how to get back to stock from where I'm at, I dont know how to figure out what bootloader I have (you asked me)
I have found a couple links on XDA that I can follow, I'm just not sure if they apply to my situation ?
This is a pretty detailed response/tutorial, but I dont know if I can just go ahead with this or not ?
http://forum.xda-developers.com/showthread.php?t=2186967
This is also very detailed: http://forum.xda-developers.com/showthread.php?t=1739426
Any help would be greatly appreciated !

robberrobbie said:
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
Click to expand...
Click to collapse
If you are sure you have the Rogers i747m and you have never loaded a stock Rogers 4.3 ROM onto your phone, you could use desktop Odin to flash a pre-rooted 4.1.2 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
Flashing the pre-rooted 4.1.2 ROM will return the phone to completely stock, wipe out all installed apps and data, and you will have root. I do not recommend flashing the Rogers 4.3 pre-rooted ROM from the link.
Once you are able to boot into the phone and set things up, you can flash Philz Touch from Odin which will give you a custom recovery on a rooted stock 4.1.2 ROM.

[Q&A] [Firmware/OTA's] [root66] SGH-T999(All Variants!) Official & Root66 FW & OTA U

[Q&A] [Firmware/OTA's] [root66] SGH-T999(All Variants!) Official & Root66 FW & OTA U
Q&A for [Firmware/OTA's] [root66] SGH-T999(All Variants!) Official & Root66 FW & OTA Updates!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Firmware/OTA's] [root66] SGH-T999(All Variants!) Official & Root66 FW & OTA Updates!. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Can I flash the root666 T999_UVUEMJC (or even the stock) firmware on top of stock T999_UVUENC2 without bricking the phone? I got the latest T999_UVUENC2 OTA update and my wifi won't work anymore . Any help would be appreciated. Thanks

GS3 t999l T999LUVUBNF4 update TowelRoot
hi just unrooted my GS3 and updated via kies to T999LUVUBNF4, went back to towelroot and it says phone is not supported. Does anyone know another quick way to root? Also is anyone else using this update and can tell me how its behaving. appreciate the info

gs3goodtome said:
hi just unrooted my GS3 and updated via kies to T999LUVUBNF4, went back to towelroot and it says phone is not supported. Does anyone know another quick way to root? Also is anyone else using this update and can tell me how its behaving. appreciate the info
Click to expand...
Click to collapse
cf-auto root, or flash SuperSU with custom recovery.

T999LUVUBNF4 Root
Hey, I've been trying to root my S3 running the T999LUVUBNF4 firmware, but I'm having trouble. Towelroot doesn't support it, I haven't seen anything about a Root66, and I've heard mixed reports on CF-auto root. Does anyone know if there is a workable solution yet? How would I go about flashing SuperSU? Thanks.

Okay I've recently just flashed the root66 firmware that gave me supersu and all that.
My question is... Where do i go from here?
How would i proceed to
1) Install TWRP?, which version as well? Is 2.8 d2tmo fine? Can i have some instructions whether i use TWRP manager(goomanager doesn't seem to exist anymore) or do i have to go into download and flash through odin 3.09?
2) Installing a custom rom? I want to install Paranoid Android 4.6 beta 5 for D2lte but i'm not sure how to go about it. I have already downloaded the rom itself but not sure how to proceed from here. Also, how would i get the working and latest version of Gapps? (Also, can you tell me how to install Cyanogenmod 11 for d2lte as well?)
3) What are some cool apps to get?
4) Which root apps/roms/softwares will brick my phone? I'm never sure which thing will work and which won't.
5) how do i install xposed?
6) How do i remove all the bloatware? and how would i got about flashing through my phone without using the computer? is mobile odin compatible with my phone?
My phone is the SGH-T999L and i have no idea if i have a locked bootloader and how i would go about and bypass the limitations of this locked bootloader

rocket540 said:
Hey, I've been trying to root my S3 running the T999LUVUBNF4 firmware, but I'm having trouble. Towelroot doesn't support it, I haven't seen anything about a Root66, and I've heard mixed reports on CF-auto root. Does anyone know if there is a workable solution yet? How would I go about flashing SuperSU? Thanks.
Click to expand...
Click to collapse
Did you read my post above yours?
IceHism said:
Okay I've recently just flashed the root66 firmware that gave me supersu and all that.
My question is... Where do i go from here?
How would i proceed to
1) Install TWRP?, which version as well? Is 2.8 d2tmo fine? Can i have some instructions whether i use TWRP manager(goomanager doesn't seem to exist anymore) or do i have to go into download and flash through odin 3.09?
2) Installing a custom rom? I want to install Paranoid Android 4.6 beta 5 for D2lte but i'm not sure how to go about it. I have already downloaded the rom itself but not sure how to proceed from here. Also, how would i get the working and latest version of Gapps? (Also, can you tell me how to install Cyanogenmod 11 for d2lte as well?)
3) What are some cool apps to get?
4) Which root apps/roms/softwares will brick my phone? I'm never sure which thing will work and which won't.
5) how do i install xposed?
6) How do i remove all the bloatware? and how would i got about flashing through my phone without using the computer? is mobile odin compatible with my phone?
My phone is the SGH-T999L and i have no idea if i have a locked bootloader and how i would go about and bypass the limitations of this locked bootloader
Click to expand...
Click to collapse
Please don't post the same thing on multiple threads. Not being rude but it doesn't help at all

Rooting SGH-T99L with T999LUVUBNF4
I've read most of the more recent posts, and it is still unclear to me how to root my T999L which is already on the T999LUVUBNF4 baseband and build. I've seen references to cf-auto-root (like serio22 above), but the T999 (which I believe works for T999L) is based on T999UVALEM, which is 4.0.4 ICS. I certainly don't want to downgrade that far. The latest firmware on the first page of this Root66 thread is T999L_UVUBNC1, and there was a post indicating better reception with the newer modem, so I'd rather not downgrade that either. If I flash T999L_UVUBNC1 will my baseband remain intact (BNF4)? Or should I wait for a pre-rooted T999L_UVUBNF4? Or is there a better way altogether to root my T999L/BNF4?
Also, for other n00bs reading this, it's pretty clear that towelroot doesn't work on BNF4.
Thanks!!

I need some help repairing my imei
I'm on the t999
nc2 radio
on a t mobile based rom 4.3

Stock root image for Baseband ver
IM TRYING TO FIND OUT HOW TO ROOT MY s3, A baseband version of SGL99L t mobile samsung s3 T999LUVUBNF4, what file do i want?

Best root and 4.4 rom for NF4 t999L
Did you find one DKARMANN?

@DocHoliday77 is there any root66 for UVUBNF4? I tried searching everywhere in the forums and I can't seem to find anything.

android_noob12 said:
@DocHoliday77 is there any root66 for UVUBNF4? I tried searching everywhere in the forums and I can't seem to find anything.
Click to expand...
Click to collapse
not root66 , but did you read post #4?

mrrocketdog said:
not root66 , but did you read post #4?
Click to expand...
Click to collapse
See post #8, re cf-root and downgrading.

rooted Windmobile 4.4.4
anyone have 4.4.? for wind mobile what ever is the new one stock that is rooted ?

I tried flashing UVDLJC - UVDMD5 (latest OTA update) using Multiboot Recovery v2.2 - (twrp2.8.3.0)
When flashing directly onto blank partition, I got some error about missing build.prop, and so decided to try flashing on top of stock ROM.
Stock I have installed as Flash PureStock Rom + Secure UVAMB7 Kernel (from http://forum.xda-developers.com/showpost.php?p=43772060&postcount=3) -- again, in multiboot -- and tried installing OTA on top of that. Got "error executing updater binary in zip"
What am I doing wrong?
Thanks

slimkat v9 to stock tw
Please help me. I have a sgh-t999. I want to know is it safe to install stock tw t999_uvuenc2. I'm currently running slimkat v9. My baseband is t999uvuenc2 and my android version is 4.4.4 i really want my s3 to revert back to stock. Ive been asking to the roms posted in this unit if it safe to direct flash but i havent got a good advice. I really want the stock touchwiz. Pls help me.

Which firmware to use
After I un-bricked my SGH-T999 with the debrick image sdcard ( YAYYY), I was able to boot with the stock 4.3 rom again.
I reflash the root66 4.3 firmware hoping it could get the correct boot image back in place. However it got stuck at the Samsung logo.
So I went into stock recovery and did a wipe/factory reset. Now I can still boot with the debrick sdcard but I am back in JellyBean (4.1.2 T999UVDMD5).
Which firmware should I flash 4.3 or 4.1.2? And did I miraculously downgraded my firmware ( I thought it wasn't possible) ?

iam.alucard said:
Please help me. I have a sgh-t999. I want to know is it safe to install stock tw t999_uvuenc2. I'm currently running slimkat v9. My baseband is t999uvuenc2 and my android version is 4.4.4 i really want my s3 to revert back to stock. Ive been asking to the roms posted in this unit if it safe to direct flash but i havent got a good advice. I really want the stock touchwiz. Pls help me.
Click to expand...
Click to collapse
Late, but yes you can, you'll have to factory reset
pancakemiz said:
After I un-bricked my SGH-T999 with the debrick image sdcard ( YAYYY), I was able to boot with the stock 4.3 rom again.
I reflash the root66 4.3 firmware hoping it could get the correct boot image back in place. However it got stuck at the Samsung logo.
So I went into stock recovery and did a wipe/factory reset. Now I can still boot with the debrick sdcard but I am back in JellyBean (4.1.2 T999UVDMD5).
Which firmware should I flash 4.3 or 4.1.2? And did I miraculously downgraded my firmware ( I thought it wasn't possible) ?
Click to expand...
Click to collapse
What does download mode display?

Unsure which firmware to use
serio22 said:
What does download mode display?
Click to expand...
Click to collapse
Odin Mode
Product Name: SGH-T999
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Official
Qualcomm Secureboot: Enable
Warranty Bit: 1
Bootloader AP SWAEV: 1
Am I correct that if the root66 firmware had installed correctly, it should read:
Custom Binary Download: Yes
Current Binary: Custom
Click to expand...
Click to collapse
.