Hello All,
I am installed Simplicity Rom V5.2 and every thing working fine, but earphone was not detecting.
How can I resolve this problem
ahmed_atoon said:
Hello All,
I am installed Simplicity Rom V5.2 and every thing working fine, but earphone was not detecting.
How can I resolve this problem
Click to expand...
Click to collapse
This is the wrong forum.. This is Ace 2 forum
Anyways.. I know the answer and I will reply.. since I also have GT-S5830i
You can fix headphone by flashing stock kernel and module
superlenvin said:
This is the wrong forum.. This is Ace 2 forum
Anyways.. I know the answer and I will reply.. since I also have GT-S5830i
You can fix headphone by flashing stock kernel and module
Click to expand...
Click to collapse
Thanks superlenvin
But what u mean flashing stock kernel and module.
You mean restore original rom or another steps.
ahmed_atoon said:
Thanks superlenvin
But what u mean flashing stock kernel and module.
You mean restore original rom or another steps.
Click to expand...
Click to collapse
If you are not satisfied by the current rom, then you can flash stock rom via odin,
Or.. you could download both the files from the attached and flash it via recovery, the same way you flashed Simplicity:laugh:
Press thanks button if I helped :cyclops:
superlenvin said:
If you are not satisfied by the current rom, then you can flash stock rom via odin,
Or.. you could download both the files from the attached and flash it via recovery, the same way you flashed Simplicity:laugh:
Press thanks button if I helped :cyclops:
Click to expand...
Click to collapse
Very very thanks
But any option in odin put stock and module.
and from where can I found this flashed for any phone required module or flash.
And whats mean option in odin re-partition
ahmed_atoon said:
Very very thanks
But any option in odin put stock and module.
and from where can I found this flashed for any phone required module or flash.
And whats mean option in odin re-partition
Click to expand...
Click to collapse
You should flash the stock kernel and modules in CWM recovery, the same you flashed simplicity rom
DO NOT tick the repartitioning, and why are you using odin anyways, are you going back to stock ??
Hi moderator, Can you shift this thread to the correct categorie, it would help the GT-S5830i users:laugh:
Related
hello, this problem is solved. i did use odin and now it's working fine
i have downloaded the custom kernel:
[DELL] CUSTOM KERNEL FOR 2.3.6 dxkt4 v1.2
download page: 4shared.com/zip/Ar8_VkVB/dell-kernel-dxkt4-v12-new.html
and this is the form i downloaded it from:
samsunggalaxygio.latvianforum.net/t659-dell-custom-kernel-for-236-dxkt4-v12
but wifi is not working anymore after I installed this kernel, is there a solution ?
maybe when i remove the clockworkmod, but how?
I am on stock rom android 2.3.3 and i have my gio rooted.
and i dit a factory reset 2x. but it didn't help.
Install another kernel, or with Odin install your stock ROM
konstantin12 said:
Install another kernel, or with Odin install your stock ROM
Click to expand...
Click to collapse
i try to install another kernel, but that didn't work. i'm going to try Odin. thanks the fast anser
rick97skyline said:
i try to install another kernel, but that didn't work. i'm going to try Odin. thanks the fast anser
Click to expand...
Click to collapse
thanks alot you are a hero !!
thanks, thanks ,thanks problemsolved with odin
to avoid problems, only install kernels made for this phone,
you should be happy for not bricking it!
hi
i have a little big problem (or maybe a huge problem).
So, i flashed a kernel of XXLM8 from here and now i messed up with my touch screen couldn't respond anything
So, what should i do? i was using DXLC1 ROM.
i have nandroid backup located in my computer, but i can't restore it because my sd card reader had lost and i can't connect the USB Storage
can i flash XXLM8 ROM to fix this problem?? or flash a new kernel maybe?
sorry for noob question, btw thanks before
I would flash the ROM.
It'd be easier... Then after it's working fine you could root it, get CWM and restore your Nandroid backup...
Sent from my GT-I8150B using Tapatalk 2
haryobimo96 said:
hi
i have a little big problem (or maybe a huge problem).
So, i flashed a kernel of XXLM8 from here and now i messed up with my touch screen couldn't respond anything
So, what should i do? i was using DXLC1 ROM.
i have nandroid backup located in my computer, but i can't restore it because my sd card reader had lost and i can't connect the USB Storage
can i flash XXLM8 ROM to fix this problem?? or flash a new kernel maybe?
sorry for noob question, btw thanks before
Click to expand...
Click to collapse
Sorry to hear that . I was also using DXLC1 ROM for testing both XXLM8 and Cow Kernel. It was working properly. This is the 1st unsuccessful case I know so far.
U can use Odin to flash a new Stock ROM. Check whether ur touch screen is working. Then get it rooted by using update.zip method by THE-E and install CWM recovery.
Can u enter recovery mode? if can, u can mount ur USB storage to computer and move ur nandroid backup back to phone.
Select Mounts and Storage Menu -> mount USB storage
then u can get ur internal sdcard connect to PC via usb cable.
actually you are the 4th person experiencing touch screen not responding after flashing xxlm8 Rom, it seems that some device has problem with xxlm8 Rom or it could be a hardware defect.
a.fontenele said:
I would flash the ROM.
It'd be easier... Then after it's working fine you could root it, get CWM and restore your Nandroid backup...
Sent from my GT-I8150B using Tapatalk 2
Click to expand...
Click to collapse
i've tried many ROM after flashing this kernel, including cm9, kezrav4, XXLM6 and XXLM8 itself, but none of them fix this touchscreen issue
yewsiong said:
Sorry to hear that . I was also using DXLC1 ROM for testing both XXLM8 and Cow Kernel. It was working properly. This is the 1st unsuccessful case I know so far.
U can use Odin to flash a new Stock ROM. Check whether ur touch screen is working. Then get it rooted by using update.zip method by THE-E and install CWM recovery.
Can u enter recovery mode? if can, u can mount ur USB storage to computer and move ur nandroid backup back to phone.
Select Mounts and Storage Menu -> mount USB storage
then u can get ur internal sdcard connect to PC via usb cable.
Click to expand...
Click to collapse
i've tried this and all i got BSODs (with the backup being corrupted)
maybe i'll try this one after fixing my computer, any other idea?
-storm- said:
actually you are the 4th person experiencing touch screen not responding after flashing xxlm8 Rom, it seems that some device has problem with xxlm8 Rom or it could be a hardware defect.
Click to expand...
Click to collapse
yay i'm not alone
so my hardware incompatbile with XXLM8 kernel??? How about flashing Cow Kernel??
haryobimo96 said:
i've tried many ROM after flashing this kernel, including cm9, kezrav4, XXLM6 and XXLM8 itself, but none of them fix this touchscreen issue
i've tried this and all i got BSODs (with the backup being corrupted)
maybe i'll try this one after fixing my computer, any other idea?
yay i'm not alone
so my hardware incompatbile with XXLM8 kernel??? How about flashing Cow Kernel??
Click to expand...
Click to collapse
I would suggest flashing back a STOCK ROM 1st via odin(with the baseband of ur region so u can avoid any reception error, DXLM3 for Malaysian).
If the stock rom is working properly, root it and u can use a custom ROM and kernel now.
yewsiong said:
I would suggest flashing back a STOCK ROM 1st via odin(with the baseband of ur region so u can avoid any reception error, DXLM3 for Malaysian).
If the stock rom is working properly, root it and u can use a custom ROM and kernel now.
Click to expand...
Click to collapse
i've tried all indonesian rom, even the 2.3.5 rom
btw i'll flash the DXLC1 one, i have changed the kernel into Cow Kernel (which they said it's compatible with almost stock rom) just to see if they worked
=======================================
EDIT:
now i've stucked up in bootloop, which makes hypotesis in my head:
Cow Kernel create bootloop and XXLM8 Kernel froze the touchscreen
haryobimo96 said:
i've tried all indonesian rom, even the 2.3.5 rom
btw i'll flash the DXLC1 one, i have changed the kernel into Cow Kernel (which they said it's compatible with almost stock rom) just to see if they worked
=======================================
EDIT:
now i've stucked up in bootloop, which makes hypotesis in my head:
Cow Kernel create bootloop and XXLM8 Kernel froze the touchscreen
Click to expand...
Click to collapse
LOL, that's really GG.com. Try a stock ROM. Don't get soft-bricked.
yewsiong said:
LOL, that's really GG.com. Try a stock ROM. Don't get soft-bricked.
Click to expand...
Click to collapse
which stock rom should i try before sending this phone to ssc????
haryobimo96 said:
which stock rom should i try before sending this phone to ssc????
Click to expand...
Click to collapse
DXLM3 of course. It is the latest with more bug fixes.
get it from here
http://samsung-updates.com/gt-i8150-galaxy-w/
@yewsiong today i have downloaded 3 roms, with this one it will be 4 roms
btw, thx before, let's see if this rom fixed all of these problem
haryobimo96 said:
@yewsiong today i have downloaded 3 roms, with this one it will be 4 roms
btw, thx before, let's see if this rom fixed all of these problem
Click to expand...
Click to collapse
Has this problem fixed ? I used to have this problem and my solution is flashing my phone by odin and it worked
bangprovn said:
Has this problem fixed ? I used to have this problem and my solution is flashing my phone by odin and it worked
Click to expand...
Click to collapse
no, and even the DXLM3 ROM couldn't fix this problem. Now i'm confused
=============================
btw, when i flashed the XXLM8 Kernel, i was using the ZIP method
haryobimo96 said:
no, and even the DXLM3 ROM couldn't fix this problem. Now i'm confused
=============================
btw, when i flashed the XXLM8 Kernel, i was using the ZIP method
Click to expand...
Click to collapse
Could be hardware problem Bro... u should flash it back to stock and send it to SSC...
sgilmans said:
Could be hardware problem Bro... u should flash it back to stock and send it to SSC...
Click to expand...
Click to collapse
hmmm one more rom (2.3.5) and if it fails i will give it to SSC
i wonder how XXLM8 kernel could affect the hardware
and how about in SSC?? is it free?? i don't have much money on this time
haryobimo96 said:
hmmm one more rom (2.3.5) and if it fails i will give it to SSC
i wonder how XXLM8 kernel could affect the hardware
and how about in SSC?? is it free?? i don't have much money on this time
Click to expand...
Click to collapse
Before sending it to SSC, u need to flash it back to STOCK ROM, so that they can't tell u have rooted/installed custom ROM. Just tell them this happened after firmware update. LOL~ a bit EVIL but it is free with ur warranty.
yewsiong said:
Before sending it to SSC, u need to flash it back to STOCK ROM, so that they can't tell u have rooted/installed custom ROM. Just tell them this happened after firmware update. LOL~ a bit EVIL but it is free with ur warranty.
Click to expand...
Click to collapse
okay, i'll flash it into indonesian DXLM3, so i can have alibi that it not worked after update.
how about the rom inside sd card?? will they detect that i have custom rom?
haryobimo96 said:
okay, i'll flash it into indonesian DXLM3, so i can have alibi that it not worked after update.
how about the rom inside sd card?? will they detect that i have custom rom?
Click to expand...
Click to collapse
After flashing back to stock , do a full factory reset/wipe using stock recovery (Boot into Stock Recovery) just wipe everything before you send it. BTW , In my place I try to update OTA so I can get the latest DXLM3 but it tell me no update available , I'm currently still in DXLC1 , pls check your region if DXLM3 has release officially ... or just flash DXLC1 and send it. (My 2 cents)
haryobimo96 said:
okay, i'll flash it into indonesian DXLM3, so i can have alibi that it not worked after update.
how about the rom inside sd card?? will they detect that i have custom rom?
Click to expand...
Click to collapse
Just access to CWM, mount SD-card and format . And you must flash back to the official ROM
Hey guys, i'm a noob here.
I just flashed my phone with cm 10.1 and i'm not getting any signal on my phone. Before this i was on 2.3.6. Anyone have any suggestions on whether i should just flash the official 4.1.2 (and if i should, do you have any download links to the latest one?) or if you have any solution to my phone signal problem.
Thanks a lot guys
First flash JB firmware http://forum.xda-developers.com/showthread.php?t=2118119
Than flash custom ROM : Good:
muxa1980 said:
First flash JB firmware http://forum.xda-developers.com/showthread.php?t=2118119
Than flash custom ROM : Good:
Click to expand...
Click to collapse
i tried downloading the latest firmware from sammobile.com but it only had the .tar.md5 file, no csc file, so im not sure if i could follow this process
Just flash it as PDA.
Sent from my GT-I8160
Rox said:
Just flash it as PDA.
Sent from my GT-I8160
Click to expand...
Click to collapse
is there anything i need to do before i flash it as PDA?
ginryu006 said:
is there anything i need to do before i flash it as PDA?
Click to expand...
Click to collapse
wipe data/cache dalvik before and after flash
Rox said:
wipe data/cache dalvik before and after flash
Click to expand...
Click to collapse
i see, thanks. so if i flash that rom, will i lose my root access?
ginryu006 said:
i see, thanks. so if i flash that rom, will i lose my root access?
Click to expand...
Click to collapse
yes, but it is easy to have it again
there is thread out here , just flash root.zip , searfch for : "how to root jellybean" by shaan, i am to lazy xD
Rox said:
yes, but it is easy to have it again
there is thread out here , just flash root.zip , searfch for : "how to root jellybean" by shaan, i am to lazy xD
Click to expand...
Click to collapse
thanks a lot oh, and one last thing, any suggestions on which firmware is best? the one i have is XENMF1
ginryu006 said:
thanks a lot oh, and one last thing, any suggestions on which firmware is best? the one i have is XENMF1
Click to expand...
Click to collapse
Take any XXMG2 from here: http://forum.xda-developers.com/showthread.php?t=2340849
ginryu006 said:
Hey guys, i'm a noob here.
I just flashed my phone with cm 10.1 and i'm not getting any signal on my phone. Before this i was on 2.3.6. Anyone have any suggestions on whether i should just flash the official 4.1.2 (and if i should, do you have any download links to the latest one?) or if you have any solution to my phone signal problem.
Thanks a lot guys
Click to expand...
Click to collapse
back to GB Stock ROM, and you can use jelly bean 4.1.2 Frimware for your region country, flash with odin, put PDA and CSC, if your flash done, go to recovery mode, and clear data and cache , and now you can reboot , finish, your trouble is done
Rox said:
Just flash it as PDA.
Sent from my GT-I8160
Click to expand...
Click to collapse
help! i did what you said and now my phone's stuck on the boot screen. i can't even access download or recovery mode
I was installing a ROM Phantom (NG4) and am currently with stock 4.4.2 FND, and my phone not restarted, stuck on recovery screen.
I had to reinstall the Stock ROM (I used a backup of Dr Ketan I had in SD).
Is there any incompatibility issue, installing a Rom NG4 directly on top of a FND?
I use TWRP 2.7.1.2.
---------------------------
I've found the answer, moderation can delete this post.
(Not problem to flash).
hi...would u pls share what u did on your n7100 where u said u already found a solutions?
hendry said:
hi...would u pls share what u did on your n7100 where u said u already found a solutions?
Click to expand...
Click to collapse
No problem to flash NG4 on FND or FNE.
joaonds said:
No problem to flash NG4 on FND or FNE.
Click to expand...
Click to collapse
but u said, u always stuck at recovery after boot
hendry said:
but u said, u always stuck at recovery after boot
Click to expand...
Click to collapse
Yes, in my first flash.
Maybe I forgot to clean something, I do not know. I not tried again.
Now i'm in ROM 4.4.2 Stock based, with Air Comand MOD.
Hello all,
I tried to flash CM 11 nightly version on my Galaxy Note 2 but is unable to do so.
When I try to flash, I get an error message that "This package is for device: t03g, n7100, GT-N7100; this device is t03gub"
I am sure that I have downloaded the correct version but from the above message it seems that I am trying to flash different version.
Please help!!! As I have cleared all the cache and memory, I even cannot boot into system. Cleared all the data for flashing the new CM11 but as I cannot flash now, I am stuck with a dead phone which I cannot use.
Please Help!!!!!!!
Flash Stock
Kindly go to www.sammobile.com and download the correct stock firmware for your phone.
Follow the instructions over there on how to flash. Or Google how to flash with Odin.
Once you get your phone live with stock OS you can go for Custom Rom.
As per my opinion DN4 by Electron Team is the best custom ROM.
Thanks for the help...... I did figure it out.... I had the flashed the wrong TWRP file initially and now rectified it.
Was able to install the CM on my phone.
Have a another problem though..... Phone network is not recognized. I mean by default, the mobile network is turned off and when I turn it on manually, it turns off the mobile network automatically.
Not sure how to rectify it..... everything else seem to be working fine.
Please help!!!
Anyone Help please....
The EFS partition is the culprit. I do not get ant IMEI no. on the phone.
Worst part is that I dont have the back-up too....
Any way by which I can bring back the phone to life?
Please help!!!!
Shankar9822 said:
Anyone Help please....
The EFS partition is the culprit. I do not get ant IMEI no. on the phone.
Worst part is that I dont have the back-up too....
Any way by which I can bring back the phone to life?
Please help!!!!
Click to expand...
Click to collapse
Do as @vipsy6 suggested and hope that the efs gets fixed.
erljayp said:
Do as @vipsy6 suggested and hope that the efs gets fixed.
Click to expand...
Click to collapse
Yep... did that and the phone is working fine now...
Thanks for the help.
Shankar9822 said:
Yep... did that and the phone is working fine now...
Thanks for the help.
Click to expand...
Click to collapse
Good to hear.
Just don't forget to do a backup. ^^
erljayp said:
Good to hear.
Just don't forget to do a backup. ^^
Click to expand...
Click to collapse
Sure sir... did it immly...
Shankar9822 said:
Yep... did that and the phone is working fine now...
Thanks for the help.
Click to expand...
Click to collapse
Hi,
did you manage to install the custom ROM or went back to stock only. I faced the same issue and followed this post and installed stock rom from from www.sammobile.com and the phone was up again. I tried to install the custom ROM again but getting the same error. Below i have given the steps i followed. Please help if i am missing something. Please do mention the exact version of twrp recvovery that you used. Giving the link would he helpful.
steps that i followed.
1)installed custom ROM from www.sammobile.com using Odin. Phone was up again.
2)installed twrp-2.8.6.0-t03gub https://dl.twrp.me/t03g/twrp-2.8.6.0-t03gub.img.tar.html using Odin
3)booted into recovery.
4)tried to install the ROM zip from post CyanogenModX [5.1.1_r2] http://forum.xda-developers.com/showthread.php?t=2758963
5)but got the same error.
i have note 2 gt-n7100 t03gub. please help me.
regards
Varun
&kuttan said:
Hi,
did you manage to install the custom ROM or went back to stock only. I faced the same issue and followed this post and installed stock rom from from www.sammobile.com and the phone was up again. I tried to install the custom ROM again but getting the same error. Below i have given the steps i followed. Please help if i am missing something. Please do mention the exact version of twrp recvovery that you used. Giving the link would he helpful.
steps that i followed.
1)installed custom ROM from www.sammobile.com using Odin. Phone was up again.
2)installed twrp-2.8.6.0-t03gub https://dl.twrp.me/t03g/twrp-2.8.6.0-t03gub.img.tar.html using Odin
3)booted into recovery.
4)tried to install the ROM zip from post CyanogenModX [5.1.1_r2] http://forum.xda-developers.com/showthread.php?t=2758963
5)but got the same error.
i have note 2 gt-n7100 t03gub. please help me.
regards
Varun
Click to expand...
Click to collapse
Varun Did you ensure your phone is still rooted ?
Since you Install a stock rom form sams I assue its not Rooted or deodexed coz its stock rom ofcource..
Unless u are rooted you cannot install a good custom rom
Do a CF auto rooting using Odin
Reflash TWRP
Then Enjoy a new Custom rom
Go for DN 4 2.1 with mod v11 :good::good: