hi
i have a little big problem (or maybe a huge problem).
So, i flashed a kernel of XXLM8 from here and now i messed up with my touch screen couldn't respond anything
So, what should i do? i was using DXLC1 ROM.
i have nandroid backup located in my computer, but i can't restore it because my sd card reader had lost and i can't connect the USB Storage
can i flash XXLM8 ROM to fix this problem?? or flash a new kernel maybe?
sorry for noob question, btw thanks before
I would flash the ROM.
It'd be easier... Then after it's working fine you could root it, get CWM and restore your Nandroid backup...
Sent from my GT-I8150B using Tapatalk 2
haryobimo96 said:
hi
i have a little big problem (or maybe a huge problem).
So, i flashed a kernel of XXLM8 from here and now i messed up with my touch screen couldn't respond anything
So, what should i do? i was using DXLC1 ROM.
i have nandroid backup located in my computer, but i can't restore it because my sd card reader had lost and i can't connect the USB Storage
can i flash XXLM8 ROM to fix this problem?? or flash a new kernel maybe?
sorry for noob question, btw thanks before
Click to expand...
Click to collapse
Sorry to hear that . I was also using DXLC1 ROM for testing both XXLM8 and Cow Kernel. It was working properly. This is the 1st unsuccessful case I know so far.
U can use Odin to flash a new Stock ROM. Check whether ur touch screen is working. Then get it rooted by using update.zip method by THE-E and install CWM recovery.
Can u enter recovery mode? if can, u can mount ur USB storage to computer and move ur nandroid backup back to phone.
Select Mounts and Storage Menu -> mount USB storage
then u can get ur internal sdcard connect to PC via usb cable.
actually you are the 4th person experiencing touch screen not responding after flashing xxlm8 Rom, it seems that some device has problem with xxlm8 Rom or it could be a hardware defect.
a.fontenele said:
I would flash the ROM.
It'd be easier... Then after it's working fine you could root it, get CWM and restore your Nandroid backup...
Sent from my GT-I8150B using Tapatalk 2
Click to expand...
Click to collapse
i've tried many ROM after flashing this kernel, including cm9, kezrav4, XXLM6 and XXLM8 itself, but none of them fix this touchscreen issue
yewsiong said:
Sorry to hear that . I was also using DXLC1 ROM for testing both XXLM8 and Cow Kernel. It was working properly. This is the 1st unsuccessful case I know so far.
U can use Odin to flash a new Stock ROM. Check whether ur touch screen is working. Then get it rooted by using update.zip method by THE-E and install CWM recovery.
Can u enter recovery mode? if can, u can mount ur USB storage to computer and move ur nandroid backup back to phone.
Select Mounts and Storage Menu -> mount USB storage
then u can get ur internal sdcard connect to PC via usb cable.
Click to expand...
Click to collapse
i've tried this and all i got BSODs (with the backup being corrupted)
maybe i'll try this one after fixing my computer, any other idea?
-storm- said:
actually you are the 4th person experiencing touch screen not responding after flashing xxlm8 Rom, it seems that some device has problem with xxlm8 Rom or it could be a hardware defect.
Click to expand...
Click to collapse
yay i'm not alone
so my hardware incompatbile with XXLM8 kernel??? How about flashing Cow Kernel??
haryobimo96 said:
i've tried many ROM after flashing this kernel, including cm9, kezrav4, XXLM6 and XXLM8 itself, but none of them fix this touchscreen issue
i've tried this and all i got BSODs (with the backup being corrupted)
maybe i'll try this one after fixing my computer, any other idea?
yay i'm not alone
so my hardware incompatbile with XXLM8 kernel??? How about flashing Cow Kernel??
Click to expand...
Click to collapse
I would suggest flashing back a STOCK ROM 1st via odin(with the baseband of ur region so u can avoid any reception error, DXLM3 for Malaysian).
If the stock rom is working properly, root it and u can use a custom ROM and kernel now.
yewsiong said:
I would suggest flashing back a STOCK ROM 1st via odin(with the baseband of ur region so u can avoid any reception error, DXLM3 for Malaysian).
If the stock rom is working properly, root it and u can use a custom ROM and kernel now.
Click to expand...
Click to collapse
i've tried all indonesian rom, even the 2.3.5 rom
btw i'll flash the DXLC1 one, i have changed the kernel into Cow Kernel (which they said it's compatible with almost stock rom) just to see if they worked
=======================================
EDIT:
now i've stucked up in bootloop, which makes hypotesis in my head:
Cow Kernel create bootloop and XXLM8 Kernel froze the touchscreen
haryobimo96 said:
i've tried all indonesian rom, even the 2.3.5 rom
btw i'll flash the DXLC1 one, i have changed the kernel into Cow Kernel (which they said it's compatible with almost stock rom) just to see if they worked
=======================================
EDIT:
now i've stucked up in bootloop, which makes hypotesis in my head:
Cow Kernel create bootloop and XXLM8 Kernel froze the touchscreen
Click to expand...
Click to collapse
LOL, that's really GG.com. Try a stock ROM. Don't get soft-bricked.
yewsiong said:
LOL, that's really GG.com. Try a stock ROM. Don't get soft-bricked.
Click to expand...
Click to collapse
which stock rom should i try before sending this phone to ssc????
haryobimo96 said:
which stock rom should i try before sending this phone to ssc????
Click to expand...
Click to collapse
DXLM3 of course. It is the latest with more bug fixes.
get it from here
http://samsung-updates.com/gt-i8150-galaxy-w/
@yewsiong today i have downloaded 3 roms, with this one it will be 4 roms
btw, thx before, let's see if this rom fixed all of these problem
haryobimo96 said:
@yewsiong today i have downloaded 3 roms, with this one it will be 4 roms
btw, thx before, let's see if this rom fixed all of these problem
Click to expand...
Click to collapse
Has this problem fixed ? I used to have this problem and my solution is flashing my phone by odin and it worked
bangprovn said:
Has this problem fixed ? I used to have this problem and my solution is flashing my phone by odin and it worked
Click to expand...
Click to collapse
no, and even the DXLM3 ROM couldn't fix this problem. Now i'm confused
=============================
btw, when i flashed the XXLM8 Kernel, i was using the ZIP method
haryobimo96 said:
no, and even the DXLM3 ROM couldn't fix this problem. Now i'm confused
=============================
btw, when i flashed the XXLM8 Kernel, i was using the ZIP method
Click to expand...
Click to collapse
Could be hardware problem Bro... u should flash it back to stock and send it to SSC...
sgilmans said:
Could be hardware problem Bro... u should flash it back to stock and send it to SSC...
Click to expand...
Click to collapse
hmmm one more rom (2.3.5) and if it fails i will give it to SSC
i wonder how XXLM8 kernel could affect the hardware
and how about in SSC?? is it free?? i don't have much money on this time
haryobimo96 said:
hmmm one more rom (2.3.5) and if it fails i will give it to SSC
i wonder how XXLM8 kernel could affect the hardware
and how about in SSC?? is it free?? i don't have much money on this time
Click to expand...
Click to collapse
Before sending it to SSC, u need to flash it back to STOCK ROM, so that they can't tell u have rooted/installed custom ROM. Just tell them this happened after firmware update. LOL~ a bit EVIL but it is free with ur warranty.
yewsiong said:
Before sending it to SSC, u need to flash it back to STOCK ROM, so that they can't tell u have rooted/installed custom ROM. Just tell them this happened after firmware update. LOL~ a bit EVIL but it is free with ur warranty.
Click to expand...
Click to collapse
okay, i'll flash it into indonesian DXLM3, so i can have alibi that it not worked after update.
how about the rom inside sd card?? will they detect that i have custom rom?
haryobimo96 said:
okay, i'll flash it into indonesian DXLM3, so i can have alibi that it not worked after update.
how about the rom inside sd card?? will they detect that i have custom rom?
Click to expand...
Click to collapse
After flashing back to stock , do a full factory reset/wipe using stock recovery (Boot into Stock Recovery) just wipe everything before you send it. BTW , In my place I try to update OTA so I can get the latest DXLM3 but it tell me no update available , I'm currently still in DXLC1 , pls check your region if DXLM3 has release officially ... or just flash DXLC1 and send it. (My 2 cents)
haryobimo96 said:
okay, i'll flash it into indonesian DXLM3, so i can have alibi that it not worked after update.
how about the rom inside sd card?? will they detect that i have custom rom?
Click to expand...
Click to collapse
Just access to CWM, mount SD-card and format . And you must flash back to the official ROM
Related
I want to try a ICS build rooted, but i cant install a CWM because my phone freeze (i try a lot of things, i have 2 thread a bout that but never found a solution) the only Version that work for me is de ICS,so, i want to install one rooted ICS via odin.Is that possible?
EDIT: sorry, i made a mistake with the title, i want a rooted rom ocustom rom (ICS) via odin
CWM ROMs will not install via Odin. Make sure the ROM is made for the Captivate Glide. If it isn't, it won't work. Make sure the ROM comes with a kernel built for ICS. When flashing the ROM, are there any errors shown in CWM?
Sent from my CM10 Glide
Devian50 said:
CWM ROMs will not install via Odin. Make sure the ROM is made for the Captivate Glide. If it isn't, it won't work. Make sure the ROM comes with a kernel built for ICS. When flashing the ROM, are there any errors shown in CWM?
Sent from my CM10 Glide
Click to expand...
Click to collapse
thanks for your answer, i already fix the problem with the help in other thread (thanks to Rawr0w0) the GB roms still freeze, but the ics works great and rooted
lorddavid said:
thanks for your answer, i already fix the problem with the help in other thread (thanks to Rawr0w0) the GB roms still freeze, but the ics works great and rooted
Click to expand...
Click to collapse
How did you rooted the ics??? my phone freeze everytime i try to flash the cwm.
yako140891 said:
How did you rooted the ics??? my phone freeze everytime i try to flash the cwm.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1953672
try it, there is the solution in that thread. Do exactly what say in the thread and everything will work.
Just a question, your captivate glide is the canadian version? (Rogers)
lorddavid said:
http://forum.xda-developers.com/showthread.php?t=1953672
try it, there is the solution in that thread. Do exactly what say in the thread and everything will work.
Just a question, your captivate glide is the canadian version? (Rogers)
Click to expand...
Click to collapse
it was from rogers now its unlocked i exactly did what say in that thread but when i flash the boot and the stock rooted rom my phone starts to freeze
yako140891 said:
it was from rogers now its unlocked i exactly did what say in that thread but when i flash the boot and the stock rooted rom my phone starts to freeze
Click to expand...
Click to collapse
I see that the Glides with problems are the rogers version, maybe something in software is not the samewith ATT.
first flash the GB kernel (use the overclocked, that was the one that i use), dont select any in odin (f reset for example), restart the phone manually and get back in odin onmediatly and flash the rooted rom. after that, the phone will boot in GB,now flashwit superoneclick ICS and follow the rest of the thread.
I dont know, but its works fine when i dont select any in odin (f reset, etc)
lorddavid said:
I see that the Glides with problems are the rogers version, maybe something in software is not the samewith ATT.
first flash the GB kernel (use the overclocked, that was the one that i use), dont select any in odin (f reset for example), restart the phone manually and get back in odin onmediatly and flash the rooted rom. after that, the phone will boot in GB,now flashwit superoneclick ICS and follow the rest of the thread.
I dont know, but its works fine when i dont select any in odin (f reset, etc)
Click to expand...
Click to collapse
well my phone don't boot on GB it freezez everytime i flash the rooted rom, even when i flash the kernel with odin (uncheked all) then manually reboot and immediately enter on download mode and flash the rooted rom my phone jus freeze
yako140891 said:
well my phone don't boot on GB it freezez everytime i flash the rooted rom, even when i flash the kernel with odin (uncheked all) then manually reboot and immediately enter on download mode and flash the rooted rom my phone jus freeze
Click to expand...
Click to collapse
wich kernel are you using? i use the overclocked, try starting from ICS with superoneclick, then do the process again, i dont know, that worksfor me, start again from ICS,and use the kernel overclocked.
lorddavid said:
wich kernel are you using? i use the overclocked, try starting from ICS with superoneclick, then do the process again, i dont know, that worksfor me, start again from ICS,and use the kernel overclocked.
Click to expand...
Click to collapse
finally i could run cwm on ics but then it freezed on cwm and cant access cwm again did you had that problem???im going to do everything again
yako140891 said:
finally i could run cwm on ics but then it freezed on cwm and cant access cwm again did you had that problem???im going to do everything again
Click to expand...
Click to collapse
Yes, i has that problem, but no more, (dont know if freeze only with usb plug or not) i already has all those problem, but fixe it doing all that say the thread
PD: Again, sorry if i have bad english
lorddavid said:
Yes, i has that problem, but no more, (dont know if freeze only with usb plug or not) i already has all those problem, but fixe it doing all that say the thread
PD: Again, sorry if i have bad english
Click to expand...
Click to collapse
A much simpler way to root your phone is to just Odin clockworkmod recovery then wipe all and format all and flash a rooted ROM.. Takes 5 min
Sent from my Inspire 4G using xda premium
dman3285 said:
A much simpler way to root your phone is to just Odin clockworkmod recovery then wipe all and format all and flash a rooted ROM.. Takes 5 min
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Yes, i try that, but when i just simply flash clockworkmod via odin, then the phone freeze when i enter in the recovery, to make the recovery work, i do all that say in that thread and works perfect, dont know why.
yako140891 is having the same problem that i has before, and i now that is software problem because is fixed in my phone, but dont know exactly why the phone freeze.
PD: all the phones that have this problem, are from Rogers, maybe is something different but dont know
Has any one tried this ??? what is the Benefits ??
g4govind87 said:
Has any one tried this ??? what is the Benefits ??
Click to expand...
Click to collapse
Nothing confusing. The kernel might solve some reboot issues. If you did not flash the kernel but the phone rebooted then no need to flash kernel.
bongski55 said:
Nothing confusing. The kernel might solve some reboot issues. If you did not flash the kernel but the phone rebooted then no need to flash kernel.
Click to expand...
Click to collapse
ohkkk.. then its ok. my phone is working fine. but is there any spl feature of this kernal..
Hello All,
I am installed Simplicity Rom V5.2 and every thing working fine, but earphone was not detecting.
How can I resolve this problem
ahmed_atoon said:
Hello All,
I am installed Simplicity Rom V5.2 and every thing working fine, but earphone was not detecting.
How can I resolve this problem
Click to expand...
Click to collapse
This is the wrong forum.. This is Ace 2 forum
Anyways.. I know the answer and I will reply.. since I also have GT-S5830i
You can fix headphone by flashing stock kernel and module
superlenvin said:
This is the wrong forum.. This is Ace 2 forum
Anyways.. I know the answer and I will reply.. since I also have GT-S5830i
You can fix headphone by flashing stock kernel and module
Click to expand...
Click to collapse
Thanks superlenvin
But what u mean flashing stock kernel and module.
You mean restore original rom or another steps.
ahmed_atoon said:
Thanks superlenvin
But what u mean flashing stock kernel and module.
You mean restore original rom or another steps.
Click to expand...
Click to collapse
If you are not satisfied by the current rom, then you can flash stock rom via odin,
Or.. you could download both the files from the attached and flash it via recovery, the same way you flashed Simplicity:laugh:
Press thanks button if I helped :cyclops:
superlenvin said:
If you are not satisfied by the current rom, then you can flash stock rom via odin,
Or.. you could download both the files from the attached and flash it via recovery, the same way you flashed Simplicity:laugh:
Press thanks button if I helped :cyclops:
Click to expand...
Click to collapse
Very very thanks
But any option in odin put stock and module.
and from where can I found this flashed for any phone required module or flash.
And whats mean option in odin re-partition
ahmed_atoon said:
Very very thanks
But any option in odin put stock and module.
and from where can I found this flashed for any phone required module or flash.
And whats mean option in odin re-partition
Click to expand...
Click to collapse
You should flash the stock kernel and modules in CWM recovery, the same you flashed simplicity rom
DO NOT tick the repartitioning, and why are you using odin anyways, are you going back to stock ??
Hi moderator, Can you shift this thread to the correct categorie, it would help the GT-S5830i users:laugh:
Hello guys!
I have an Ace2 (which was on Android 2.3.6) and tried to install CM11. At first it didn't work, because I had no CWM. So I flashed a Kernel with CWM and installed the CM11-ROM via CWM. That was no problem. But when I was setting up the ROM, I realised that I had no mobile/phone connection at all.
So I tried to install a few stock firmwares via Odin. The installation always finishes with no errors. But when I boot the phone it does not get any further than to the Samsung-startscreen.
And I can't access the recovery mode anymore! Only Odin-Mode is still possible.
Is there an option to get my phone back to some kind of stock state.
Please help me out!
Guvoro said:
Hello guys!
I have an Ace2 (which was on Android 2.3.6) and tried to install CM11. At first it didn't work, because I had no CWM. So I flashed a Kernel with CWM and installed the CM11-ROM via CWM. That was no problem. But when I was setting up the ROM, I realised that I had no mobile/phone connection at all.
So I tried to install a few stock firmwares via Odin. The installation always finishes with no errors. But when I boot the phone it does not get any further than to the Samsung-startscreen.
And I can't access the recovery mode anymore! Only Odin-Mode is still possible.
Is there an option to get my phone back to some kind of stock state.
Please help me out!
Click to expand...
Click to collapse
Try to re-flash into stock rom, the jellybean version. If you had a problem with the network maybe there's something wrong with the csc file
Guvoro said:
Hello guys!
I have an Ace2 (which was on Android 2.3.6) and tried to install CM11. At first it didn't work, because I had no CWM. So I flashed a Kernel with CWM and installed the CM11-ROM via CWM. That was no problem. But when I was setting up the ROM, I realised that I had no mobile/phone connection at all.
So I tried to install a few stock firmwares via Odin. The installation always finishes with no errors. But when I boot the phone it does not get any further than to the Samsung-startscreen.
And I can't access the recovery mode anymore! Only Odin-Mode is still possible.
Is there an option to get my phone back to some kind of stock state.
Please help me out!
Click to expand...
Click to collapse
-downgrade to gb
-flash stock jb via odin
-flash cm11
-search
Sent from my GT-I8160 using Tapatalk
teddytsen said:
-downgrade to gb
-flash stock jb via odin
-flash cm11
-search
Click to expand...
Click to collapse
That's what I'm trying now. I thought I already tried to downgrade to GB but after looking on the filenames of the different firmwares I tried, I noticed that they are all JB's.
Thank you for the replys. Currently I'm waiting for my GB-firmware to download...
You havr to use the 3 part firmware to downgrade.
Sent from my GT-I8160 using Tapatalk
teddytsen said:
You havr to use the 3 part firmware to downgrade.
Click to expand...
Click to collapse
Where do I get that firmware from?!
Link is somewhere in this thread http://forum.xda-developers.com/showthread.php?t=2141930
if u will get bootloop after installing GB, go into recovery (if u will get that possibility) and wipe it, btw, did i understood well? U flashed CM11 when u have been on GB?
---------- Post added at 07:20 PM ---------- Previous post was at 07:17 PM ----------
U can also try to flash stock GB/JB (depends on which firmware u have now) kernel separatly. Ramdisk (u have recovery in it) is flashed with kernel so it can help
artur1131 said:
did i understood well? U flashed CM11 when u have been on GB?
Yes! That's what I did!
Click to expand...
Click to collapse
That was stupid
Well try this 3-file GB that i given to u and tell us if it worked.
artur1131 said:
That was stupid
Well try this 3-file GB that i given to u and tell us if it worked.
Click to expand...
Click to collapse
NOW I KNOW TOO! :silly:
I have to stock upgrade to JB first, BEFORE I flash custom JB ROMs.
I'm already loading a 3-part firmware, from that thread you gave me. Although the first link did not work, I hope there is the same (3-part) firmware in the second link.
U mean u are downloading from this link http://d-h.st/AZN ? (I8160XXLK6.zip)
Yes, its definetly GB stock rom, i was forced to use I8160XXLK6 (not from this link, but still) when i messed up my phone few weeks ago (same problem i could enter only odin-mode)
artur1131 said:
U mean u are downloading from this link http://d-h.st/AZN ? (I8160XXLK6.zip)
Yes, its definetly GB stock rom, i was forced to use I8160XXLK6 (not from this link, but still) when i messed up my phone few weeks ago (same problem i could enter only odin-mode)
Click to expand...
Click to collapse
Yep, that's exactly what I'm downloading @ the moment.
And those are the 3 parts for Odin which should bring the phone back to GB-stock?
PDA: CODE_GT-I8160_I8160XXLK6_CL1211243_REV00_user_SEC_KEY_LK6_4G.tar
CSC: CSC_GT-I8160-MULTI-CSC-OXELF1_SEC_KEY_4G.tar
PIT: GT-I8160_EUR_XX_4G
Did I get that right?
I just don't want to mess it up again...
And btw:
I already tried a I8160XXLK6 but it was a single-file firmware and had no effect on my problem.
I need the 3-parts including CSC and PIT, right?
It doesnt work? Huh dunno why.
Lets trust @teddysten and upgrade to JB, it might work
If it wont u will have to do some research and find 3-part GB rom
The single-file firmware did not work for me!
I haven't tried the 3-part firmware yet, from the link that you gave me. In about 10 minutes the download will be finished and I'm going to try it immediately!
Well. Remember that after flashing first booting (samsung logo ANIMATION) takes a while.
if u will still have this issue after downgrading to GB then upgrade it from this to JB anyway because it might work (dont ask me how, i dont know how so i wont explain). For now im out and ill visit XDA tommorow (earliest).
soo Good Luck and i hope that others will help u too if u will get some problems.
I am here if you need help
What version of you Odin do you have ?
Ok...
I downloaded the 3-part firmware to get back to GB stock.
That worked.
Then I installed the original JB-firmware from my provider.
That worked too.
So I'm happy again and everything is working!
Thanx a lot guys!!!!! :highfive:
Guvoro said:
Ok...
I downloaded the 3-part firmware to get back to GB stock.
That worked.
Then I installed the original JB-firmware from my provider.
That worked too.
So I'm happy again and everything is working!
Thanx a lot guys!!!!! :highfive:
Click to expand...
Click to collapse
Well you've learnt your lesson. Never try to flash from GB to KK
Sent from my GT-I8160 using XDA Premium 4 mobile app
Thank you so much. I was in this EXACT situation (GB to KK) and tried everything; pretty much every GB single-file ROM I could file. The 3-part ROM did the trick though! DD I'm literally so grateful right now I put in the effort to sign up and post this thank you message... that's a lot of effort for me xD
Hi i just got an arc form my friend to play with it & i am not noob with all this.
my problem is after installing custom roms like "Iridescent_Zed_III" & The Awesome™ ROM phone either boots up with FCs or just
stays bootlooping.
So i checked the system partition space and its less that the required by rom, so what can i do to increase the size of /system?
there should be a way as people are enjoying those roms w/o problem, so please tell me what can i do?
piousheart said:
Hi i just got an arc form my friend to play with it & i am not noob with all this.
my problem is after installing custom roms like "Iridescent_Zed_III" & The Awesome™ ROM phone either boots up with FCs or just
stays bootlooping.
So i checked the system partition space and its less that the required by rom, so what can i do to increase the size of /system?
there should be a way as people are enjoying those roms w/o problem, so please tell me what can i do?
Click to expand...
Click to collapse
Flash ARC S stock ics ftf with flashtool..
Sent from my MT11i using Tapatalk 2
Attitude.SSJ said:
Flash ARC S stock ics ftf with flashtool..
Sent from my MT11i using Tapatalk 2
Click to expand...
Click to collapse
what if i want to use the custom kernel
piousheart said:
what if i want to use the custom kernel
Click to expand...
Click to collapse
First flash Arc S stock ICS firmware, then flash custom kernel and then the ROM.
if you have any problem , just use Sony flash tool EMMA, and always you need to flash kernel from custom ROM, it`s the boot.img inside the zip file the ROM , and then installit from the sd card, if you dont probably you`ll stuck i n boot loop.