Develop Bugs

How do i get cwr on miui 2.4.13_4.0.4

When i flash this rom an i try to go into recovery its not there..so when i install it from the e4gtauto it wont boot back into the rom..what do i do..in the e4gtauto what am i suppose to choose

You need to odin a recovery with it baked in. You only need to do this if you are wanting to leave MIUI. For now the kernel that comes bundled in the ROM doesn't have the recovery you want.
Sent from my SPH-D710 using Tapatalk 2

CWM is not included in the rom for your protection. If you need to do any flashing you can use autoroot to flash el26cwm. When it reboots besure to hold the volume up and power keys to get into recovery as flashing the gingerbread kernel will cause your phone not to boot back into the rom since it's an ICS ROM. At the moment using any type of custom recovery in ICS is not recommended thus why the developers have taken it out due to all the bricking issues.

COOL COOL i just like to back up my roms..im on xplod mini 2.0 using rougue_ET-1.4.0-GUNSLINGER and its works an this is a ics rom...just a heads up

Please what ever you do I would avoid to do any wiping or restoring while in an ICS recovery/kernel. Please note also even the the gunslinger thread, its advised not to do any type of flashing *on ICS builds* Backing up might be ok, but nonetheless take your time and try to read as much as possible, there's numerous thread posted by others who have asked a similar question and has been answered.

kingcaliyone said:
When i flash this rom an i try to go into recovery its not there..so when i install it from the e4gtauto it wont boot back into the rom..what do i do..in the e4gtauto what am i suppose to choose
Click to expand...
Click to collapse
Clear cut reason why more reading of threads in xda is.needed. please please please take so.e time and read the brick threads. Also everyone in here has given you some good advice
Sent from my SPH-D710 using Tapatalk

i do read clearly .....if i didn't i wouldn't know how to do this stuff i just wanted to know was there a recovery to use with tha Rom gggeessshhh
Sent from my SPH-D710 using xda premium

you can mobile Odin el26. then reboot right into recovery.
easiest and safest way.
but you will have to reflash a kernel or rom in order to boot back up after you done in recovery.

kingcaliyone said:
i do read clearly .....if i didn't i wouldn't know how to do this stuff i just wanted to know was there a recovery to use with tha Rom gggeessshhh
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
"Be sure" when you flash el26 cwm 5.0.2.7 that just after boot, when first Samsung screen appears, start to hold power and volume up.. Otherwise you will have issues.. This is a gingerbread kernel and isn't made to run on ics, but does work as long as you follow those exact instructions.. I always just keep a copy of the el26 cwm tar on my sdcard and use mobile odin to flash it when I leave a rom.... It's fastest way to do this... Here is cwm el26 tar. Use either pc odin 1.85 or mobile odin to flash..
http://db.tt/rIxjBIk8
Sent from my SPH-D710 using Tapatalk 2 Beta-5

kingcaliyone said:
i do read clearly .....if i didn't i wouldn't know how to do this stuff i just wanted to know was there a recovery to use with tha Rom gggeessshhh
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Chill..... that's Playya you're talking to
Sent from my SPH-D710 using xda premium

Need help

I have the TMobile Galaxy s3 rooted on most recent stock firmware. I installed a new font using rom toolbox after backing up firmware with TWRP, so it though. After installing the font I got a message telling me to reboot for changes to take effect. Reboot hangs at the glowing Samsung logo. I have rebooted in to recovery and it comes up with CWM recovery vice TWRP some how? I know I flashed TWRP through rom toolbox but it didn't take apparently. I did get a message that backup was successful. CWM will not recognize TWRP backup. I need a flashable zip for the correct TWRP recovery. Could someone please point me in the right direction for the TWRP recovery file or to get me out of this boot loop. Should I just flash the stock firmware?

If you dl the tool all the recoverys
Are in there just flash team wins recovery thru Odin
Sent from my SGH-T999 using xda premium
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
http://forum.xda-developers.com/showthread.php?t=1746682
Sent from my SGH-T999 using xda premium

funziebear said:
If you dl the tool all the recoverys
Are in there just flash team wins recovery thru Odin
Sent from my SGH-T999 using xda premium
I'm not following you what tool do I dl for all of the recoverys? Link?
Click to expand...
Click to collapse

I posted a link
Sent from my SGH-T999 using xda premium

Sweet! I didn't realize that a tool kit existed! Thanks for the help looks like this should do the trick.

dashhackinfread said:
Sweet! I didn't realize that a tool kit existed! Thanks for the help looks like this should do the trick.
Click to expand...
Click to collapse
When you install it and choose for the custom recovery it will open Odin and ull have I think 3 options for the T-Mobile s3 just choose the teamwinsrecory I think its the last one on the list and flash it thru Odin: ) hope it helps out
Sent from my SGH-T999 using xda premium

I was able to get the team win recovery but the backup I made did not show up there either. I guess I will have to flash the stock rom and start over again. I don't know what I did wrong, thought I had backed up with TWRP. Kinda weird how stock recovery comes back after a new one is flashed. If I reboot into recovery now I get stock after being able to access TWRP and rebooting. Next time I go in I am back in stock? Don't know I will have to find a fix after I get back to stock.

dashhackinfread said:
I was able to get the team win recovery but the backup I made did not show up there either. I guess I will have to flash the stock rom and start over again. I don't know what I did wrong, thought I had backed up with TWRP. Kinda weird how stock recovery comes back after a new one is flashed. If I reboot into recovery now I get stock after being able to access TWRP and rebooting. Next time I go in I am back in stock? Don't know I will have to find a fix after I get back to stock.
Click to expand...
Click to collapse
That happen to me but it was my fault I backed up and didn't check file size the folder was there but it was empty, just start over and make sure ur backups are there you should be able to just flash a rom if u have a card reader to transfer files onto SD card, that's what I did and I was back at it phone working 20 mins later
Sent from my SGH-T999 using xda premium

I'll give it a shot. What rom would you recommend? I was just rooted on stock b4. I was thinking about the Frosty JB rom.

dashhackinfread said:
I'll give it a shot. What rom would you recommend? I was just rooted on stock b4. I was thinking about the Frosty JB rom.
Click to expand...
Click to collapse
If you like the stick features something stock rooted, I'm running paranoid cuz its easier for me to use with one hand and i like the features on it
Sent from my SGH-T999 using xda premium

Cool! Thanks so much for your help. I just want back to stock for now as soon as the f/w is done dl'n I will let you know how it goes.

All is well now back to stock and going through the setup process. Going to re-root and stay away from rom toolbox this time.

I screwed up and now it's stuck at the logo

I rooted it had a ton of apps on it and I just couldn't leave it alone. I couldn't figure out why I rooted it and then my Shealth quit working. So, I decided to install a different rom. Which I assume was back to factory. Well then I didn't have the dual window feature and couldn't get it on there either. So, tried to flash another rom. Well that didn't work now it just says Galaxy S4 and stuck there. 2 of the roms that I try to flash won't even work for some reason. This is TMobile.
One of them is this: ! SGH-M919-TMB-M919UVUAMDL That one didn't work.
Did this one: I9500_Omega_v3.0_X.....
I don't know where to start or begin now. Been trying to fix this for the last 6 hours and it is 5:00 am in the morning. I am going to have to sleep on this one.

Isnt is for Tmobile US versions??
You screwed up by flashing i9500 Rom man. May be u made softbrick before which leaves u option to go back to stock by odin but after u flash international rom you are screwed totally.
Sent from my SGH-M919 using xda premium
---------- Post added at 11:40 AM ---------- Previous post was at 11:36 AM ----------
Its hard bricked now.
Power off first and try pressing power +home + volume down button ; see if u can reboot into download mode.
Sent from my SGH-M919 using xda premium

bikrame said:
Isnt is for Tmobile US versions??
You screwed up by flashing i9500 Rom man. May be u made softbrick before which leaves u option to go back to stock by odin but after u flash international rom you are screwed totally.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
Oh Great. I thought the 9500 was the us version. So what is the US version. I can still get into recovery so I would assume i can still flash another rom.
I see it is the 9505. That is what I get with no sleep.

Outrung2 said:
Oh Great. I thought the 9500 was the us version. So what is the US version. I can still get into recovery so I would assume i can still flash another rom.
Click to expand...
Click to collapse
If you still can reboot into recovery wipe system data and chche and delvik too. Then flash any rom from our section saying for M919 (tmobile is that even att and sprint willl not work ).
You are on good shape if u can reboot into recovery.
Sent from my SGH-M919 using xda premium
---------- Post added at 11:53 AM ---------- Previous post was at 11:51 AM ----------
IF Its tmobile US version; BE CAREFULL DONT FLASH ANY ROMS FROM ATT SPRINT OR VERIZON. THEY ARE NOT SAME .
Sent from my SGH-M919 using xda premium

bikrame said:
If you still can reboot into recovery wipe system data and chche and delvik too. Then flash any rom from our section saying for M919 (tmobile is that even att and sprint willl not work ).
You are on good shape if u can reboot into recovery.
Sent from my SGH-M919 using xda premium
---------- Post added at 11:53 AM ---------- Previous post was at 11:51 AM ----------
IF Its tmobile US version; BE CAREFULL DONT FLASH ANY ROMS FROM ATT SPRINT OR VERIZON. THEY ARE NOT SAME .
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
Thats kinda how this started. I downloaded one for tmobile. Every time I ran it though it said bad. Not sure why. SGH-M919-TMB-M919UVUAMDL.ZIP
Do you have a better link to a tmobile one?

Flash this one
http://forum.xda-developers.com/showthread.php?t=2274795
May be its not flashable.
The one I gave is stock but rooted.
Sent from my SGH-M919 using xda premium

What carrier are you with?
Sent from my SGH-M919 using xda app-developers app

You probably installed the I9500 ROM and soft bricked the device. the same thing happened to me a few months ago with my s3. go to samsung-updates.com and install the SGH-M919 stock rom. then, go to download mode and flash that ROM with odin. the same thing happened to me when i was a noob with ROMs. a soft brick is actually quite easy to recover from. at least it wasnt a hard brick.

bikrame said:
Flash this one
http://forum.xda-developers.com/showthread.php?t=2274795
May be its not flashable.
The one I gave is stock but rooted.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
This is exactly what I need. However the download on that page is not working.

I am still having trouble. I have no idea why. I have rooted every phone that I had with no problem. But this should be so simple and it's not
When I first rooted Shealth stopped working. Then I was going to just forget about it. But it was something that I wanted to use. So after a few days I decided I wanted it to work. I didn't see that anyone else had this problem. So I downloaded what I thought was the US version but guess it was not. I installed this new rom. Well now I had 2 problems. No multi window and still my shealth didn't work.
Then I thought oh crap I forgot to do a wipe. So I did a wipe and re-ran the rom. Well that is where I got stuck. I can not get passed the S4 Screen still. I can get into recovery, flash the rom (the rom flashes in like 1min which sure does seem fast). I then reboot and get right back to the s4 screen. Can't get passed it.
So here is my question. These tar files that I keep downloading. They are all zip files. If I wanted to flash them via odin as one told me to do I can't because it is a zip. Am I supposed to unpack this or change the extension from zip to tar?
Been without my phone for almost 24 hours and driving me nuts. At this point I would be glad just to see a working phone.

If it is the stock tar file you need to unzip it. The tar will be in the zip file. It will have an extension of tar.md5 if memory serves.

Sounds like you lost system files. If you can still get into stock recovery, then reformat system and then flash a stock rom. From there, you'll have to reroot.

Atmazzz said:
If it is the stock tar file you need to unzip it. The tar will be in the zip file. It will have an extension of tar.md5 if memory serves.
Click to expand...
Click to collapse
Ok I downloaded a stock rom and unzipped it. I then did a search for tar and it couldn't find it. I couldn't find it manually either. So now I am converting the whole zip file to a tar. Gonna take a while for 1.6 gigs

Outrung2 said:
Ok I downloaded a stock rom and unzipped it. I then did a search for tar and it couldn't find it. I couldn't find it manually either. So now I am converting the whole zip file to a tar. Gonna take a while for 1.6 gigs
Click to expand...
Click to collapse
You shouldn't have to do that. Do you have a link to what you downloaded?

Atmazzz said:
You shouldn't have to do that. Do you have a link to what you downloaded?
Click to expand...
Click to collapse
I have so many but I am going to look them up and post them here in a minute. This is the one that I am downloading now. It actually completed but when I opened it, it came back with some errors so I am guessing it just didn't download right. I will get the links for the others in a few min.
http://forum.xda-developers.com/showthread.php?t=2274795

Here are some of the other ones.
http://forum.xda-developers.com/showthread.php?p=40962344&highlight=uvuamdl+4+2+2#post40962344
http://forum.xda-developers.com/showthread.php?t=2258628
I chose this one on there: Download UVUAMDL Official TAR
Jason

Outrung2 said:
I have so many but I am going to look them up and post them here in a minute. This is the one that I am downloading now. It actually completed but when I opened it, it came back with some errors so I am guessing it just didn't download right. I will get the links for the others in a few min.
http://forum.xda-developers.com/showthread.php?t=2274795
Click to expand...
Click to collapse
Outrung2 said:
Here are some of the other ones.
http://forum.xda-developers.com/showthread.php?p=40962344&highlight=uvuamdl+4+2+2#post40962344
http://forum.xda-developers.com/showthread.php?t=2258628
I chose this one on there: Download UVUAMDL Official TAR
Jason
Click to expand...
Click to collapse
OK, your first two links are custom Roms you flash in recovery. You don't unzip those. The last one, k0nane's thread, that's the stock firmware. Unzip and use Odin to install it.

Atmazzz said:
OK, your first two links are custom Roms you flash in recovery. You don't unzip those. The last one, k0nane's thread, that's the stock firmware. Unzip and use Odin to install it.
Click to expand...
Click to collapse
Well that is my problem. The last 2 wouldn't flash on there. I don't understand why. Let me try the one you said to do through Odin.

When I click to open so I can unzip that file I get this from winrar. ! B:\Users\Jasons\Downloads\ModdedUAMDL_v2.zip: Unexpected end of archive
I am assuming it just didn't download right so doing it again.

Outrung2 said:
When I click to open so I can unzip that file I get this from winrar. ! B:\Users\Jasons\Downloads\ModdedUAMDL_v2.zip: Unexpected end of archive
I am assuming it just didn't download right so doing it again.
Click to expand...
Click to collapse
If its saying modded, that's not the one you flash in Odin. That's a custom ROM. For Odin, its the one in k0nane's thread. The last link you posted.

Dirty Clean Flashing

I know this is a noob question to ask and has probably been asked but the way I have flashed every single rom was like this:
-Flash back to Stock Rooted EL29
-Flash EL26 kernel
-Flash rom..
So I want to flash Touched by a SGS4 1.5 gb27 but I am currently running stock rooted GB27, Is it called dirty flashing if I flash directly from my current setup, by flashing EL26 kernel then flashing this rom? Or Do I have to go back to el29 and repeat the process?
Thanks.. ...

Your step one flashing el29 is not necessary. Dirty flashing is flashing el26 then flashing a different rom or update and only wiping dalvik and cache. Generally if you are moving between different roms it is best to wipe system and data. Being that there could be alot of headache.
Sent from my SPH-L900 using Tapatalk 2

patrao_n said:
Your step one flashing el29 is not necessary. Dirty flashing is flashing el26 then flashing a different rom or update and only wiping dalvik and cache. Generally if you are moving between different roms it is best to wipe system and data. Being that there could be alot of headache.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Patrao is right. You do not need to flash back to GB stock before flashing from JB to JB. Since you are already running gb27, your partitioning is good to go. Dirty flash simply replaces your current Rom with the new one. Wall paper, contacts, downloaded apps, all stay. Full wipe(clean flash) involves wiping data, which wipes everything I just listed above, including all of your settings, contacts texts, etc. Try dirty flash first. Since you are on jb, you have nothing to lose. Just reboot to recovery, do a backup, wipe cache and dalvik only, then flash new ROM. If you have issues, just reboot back to recovery and flash it clean. But I always flash dirty, jb to jb, and haven't had any issues. Good luck
Sent from my SPH-D710VMUB using xda premium

So I was running GB27 and i guess i took your advice, and i went into recovery, delete data, flashed jbwipex2 and then flashed my room and got a bootloop... well not really bootloop it was kind of like a stuck at splash screen then it turned off and repeated..

IamFlynn said:
So I was running GB27 and i guess i took your advice, and i went into recovery, delete data, flashed jbwipex2 and then flashed my room and got a bootloop... well not really bootloop it was kind of like a stuck at splash screen then it turned off and repeated..
Click to expand...
Click to collapse
Did you check the md5 to make sure it was a good download? Sounds like a bad flash. Download rom again and try flashing again
Sent from my SPH-D710BST using xda premium

IamFlynn said:
So I was running GB27 and i guess i took your advice, and i went into recovery, delete data, flashed jbwipex2 and then flashed my room and got a bootloop... well not really bootloop it was kind of like a stuck at splash screen then it turned off and repeated..
Click to expand...
Click to collapse
What recovery did you clean flash from?
With TBSGS4 or most if not all ROMs flash EL26+CWM or EL29 Direct boot kernel and do your full wipe and flash from one of those recoveries.
That's what I have up in the OP under install directions. Trust me I bootlooped a few times flashing from agat's recovery.
Sent from my SPH-D710 using xda premium

g_ding84 said:
What recovery did you clean flash from?
With TBSGS4 or most if not all ROMs flash EL26+CWM or EL29 Direct boot kernel and do your full wipe and flash from one of those recoveries.
That's what I have up in the OP under install directions. Trust me I bootlooped a few times flashing from agat's recovery.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
As have I lol...can't go wrong with the trusty gb safe kernels! :thumbup:
Sent from my SPH-D710BST using xda premium

I flashed with Agats recovery and the rom had a good md5..
I ended up flashing back to EL29 to get rid of bootloop and flashing el26 kernel. Now im running TBSGS4 YAYA

IamFlynn said:
I flashed with Agats recovery and the rom had a good md5..
I ended up flashing back to EL29 to get rid of bootloop and flashing el26 kernel. Now im running TBSGS4 YAYA
Click to expand...
Click to collapse
Glad to hear it and good troubleshooting! Thanks for the update. :thumbup::beer:
Sent from my SPH-D710BST using xda premium

g_ding84 said:
What recovery did you clean flash from?
With TBSGS4 or most if not all ROMs flash EL26+CWM or EL29 Direct boot kernel and do your full wipe and flash from one of those recoveries.
That's what I have up in the OP under install directions. Trust me I bootlooped a few times flashing from agat's recovery.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Could you please let us know what you are talking about ，dear great sir

actually what g_ding84 was plain as day. look up the key words.
sent from my bad a$$ note 2

tangjun188988 said:
Could you please let us know what you are talking about ，dear great sir
Click to expand...
Click to collapse
With what? About flashing from EL26 or EL29. That's for clean flashing. I'm going to be making update zips for each new version as well as a full ROM so no more dirty ROM flashes.
Under my install directions it has clean flash from EL26 (preferably) or EL29 DB kernel. Also in post #4 has that in the "How to flash a custom ROM." Section.
Sent from my SPH-D710 using xda premium
---------- Post added at 11:22 AM ---------- Previous post was at 11:20 AM ----------
http://forum.xda-developers.com/showthread.php?p=35539014
Look under Flash a custom ROM.
Post #4 in TBSGS4 thread.
Sent from my SPH-D710 using xda premium

tangjun188988 said:
Could you please let us know what you are talking about ，dear great sir
Click to expand...
Click to collapse
Problem's been solved.

my friend , I am suffering the similarity as you were . Could you give me some advice? here is my situation:
I want to taste the White Out Rom V.4 or the Re-Calked in Jellybean ROM V1.1.
At first ,I was in Jellyverse 3.0 GB27 , so I flash EL26 kernel , flash JB.Format_All_X2 ,and flash rom ,but it repeated the first screen ,restart and restart.
Then I flash it back to EL29,repeat the process just said, still my S2 repeated again and again at the first screen.
all the best !!gratitude and gratitude!

tangjun188988 said:
my friend , I am suffering the similarity as you were . Could you give me some advice? here is my situation:
I want to taste the White Out Rom V.4 or the Re-Calked in Jellybean ROM V1.1.
At first ,I was in Jellyverse 3.0 GB27 , so I flash EL26 kernel , flash JB.Format_All_X2 ,and flash rom ,but it repeated the first screen ,restart and restart.
Then I flash it back to EL29,repeat the process just said, still my S2 repeated again and again at the first screen.
all the best !!gratitude and gratitude!
Click to expand...
Click to collapse
Did you wrote wipe everything exactly according to the install instructions? Sounds like not. Also, re-download the ROM, sounds like you may have a bad dl as well.
Sent from my SPH-D710BST using xda premium

jdsingle76 said:
Did you wrote wipe everything exactly according to the install instructions? Sounds like not. Also, re-download the ROM, sounds like you may have a bad dl as well.
Sent from my SPH-D710BST using xda premium
Click to expand...
Click to collapse
good friend ,I flash a JB.Format_All_X2 after flshing a EL 26 kernel , so the area of data ,system ,cache, preload are all formatted twice. So I think I've done as the introduction. Do you mean there is something else I haven't wipe????????
On the other hand , the situation I said occurs frequently. Does a bad download occurs frequently ??
need your further advice. Gratitude!!!!

tangjun188988 said:
good friend ,I flash a JB.Format_All_X2 after flshing a EL 26 kernel , so the area of data ,system ,cache, preload are all formatted twice. So I think I've done as the introduction. Do you mean there is something else I haven't wipe????????
On the other hand , the situation I said occurs frequently. Does a bad download occurs frequently ??
need your further advice. Gratitude!!!!
Click to expand...
Click to collapse
Easiest way to see if you have a good download almost every time is download the ROM to your PC check the MD5 then transfer to your phone
And check the MD5 again. You would be surprise how many times I've gotten a bad d/l when downloading to my phone.
Sent from my SPH-D710 using xda premium

g_ding84 said:
Easiest way to see if you have a good download almost every time is download the ROM to your PC check the MD5 then transfer to your phone
And check the MD5 again. You would be surprise how many times I've gotten a bad d/l when downloading to my phone.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
+1. Plus for me it dl so much faster to pc on Wi-Fi vs phone.
Sent from my SPH-D710BST using xda premium

g_ding84 said:
Easiest way to see if you have a good download almost every time is download the ROM to your PC check the MD5 then transfer to your phone
And check the MD5 again. You would be surprise how many times I've gotten a bad d/l when downloading to my phone.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Thanks quite quite a lot...... I red/l and check MD5. Then I use a clean flash from ICS to GB27 , a great success, Ha . I also tried a dirty flash from GB27 to GB27 , no failure occurs. I enjoy it .
Besides , thanks for your contribution to all of us , your roms are beautiful.
---------- Post added at 01:03 PM ---------- Previous post was at 12:53 PM ----------
jdsingle76 said:
+1. Plus for me it dl so much faster to pc on Wi-Fi vs phone.
Sent from my SPH-D710BST using xda premium
Click to expand...
Click to collapse
I download the rom again , it makes a difference. Thanks a lot ... I have been ignoring the exist of a bad d/l...I am going to check MD5 everytime......
And this time I chang from GB27 to GB27 just bying a dirty flash , and it unexpectedly succeeded.
Thank u , for all your advices
---------- Post added at 01:10 PM ---------- Previous post was at 01:03 PM ----------
patrao_n said:
actually what g_ding84 was plain as day. look up the key words.
sent from my bad a$$ note 2
Click to expand...
Click to collapse
Thanks , the problem is gone.

tangjun188988 said:
Thanks quite quite a lot...... I red/l and check MD5. Then I use a clean flash from ICS to GB27 , a great success, Ha . I also tried a dirty flash from GB27 to GB27 , no failure occurs. I enjoy it .
Besides , thanks for your contribution to all of us , your roms are beautiful.
---------- Post added at 01:03 PM ---------- Previous post was at 12:53 PM ----------
I download the rom again , it makes a difference. Thanks a lot ... I have been ignoring the exist of a bad d/l...I am going to check MD5 everytime......
And this time I chang from GB27 to GB27 just bying a dirty flash , and it unexpectedly succeeded.
Thank u , for all your advices
---------- Post added at 01:10 PM ---------- Previous post was at 01:03 PM ----------
Thanks , the problem is gone.
Click to expand...
Click to collapse
Thank you very much. Glad you got it up and running.
Sent from my SPH-D710 using xda premium

[Q] Flashing custom ROM help

Hello all, I have a question for you. I have a sprint epic 4g touch with the GB27 kernal. I want to flash a custom ROM though. I am rooted, with only the stock recovery. my question is how can i flas ha custom rom on the gb27 kernal. and which rom should I flash?

http://forum.xda-developers.com/showthread.php?t=1953783
If you scroll down a little bit to post 2 you'll see
Q. Now I am rooted, how do I install clockwork mod...
Click to expand...
Click to collapse
This will explain the process and as for a custom rom, I'd suggest that you look at a few and pick one that looks interesting to try; there are several excellent roms available for the E4GT.

mobile odin...in playstore or there is a free apk floating around on xda..once this is installed go grab a gb27 kernal withagats recovery from repository..and grab the el 29 direct boot kernal...el29 is safe to flash any rom from...download rom of choice..make sure this is all on ur root of sdcard...open mobile odin.click on kernal.go to ur el29 kernal and pick it and flash..odin will check md5,but u should too..once in recovery hit volume down , volume up , volume down..now ur power button is enabled as ur enter button..wipe data,wipe cache,wipe dalvik cache,in advanced....do anything specif from rom op that the dev says...read,read,read....lol..rom should have a kernal with it...u might have to flash gapps zip....reboot....if this is ur first time on jb...i suggest getting a one-click restore so ur system partition is right for jb...there r great guides in repository for all of this...dont forget to thank ur rom dev and rwillco and any others that helped....good luck and as always...im not responsible if ur phone blows up or ur microwave runs away...lol

I found an install method for cm 10.1 and ClockworkMod recovery. I need to be on ICS. I am on rooted GB27. How do I flash down?

It will still work, are you using mobile Odin to flash CWM
Sent from my SPH-D710 using Tapatalk 4 Beta

eddytheyeti2 said:
I found an install method for cm 10.1 and ClockworkMod recovery. I need to be on ICS. I am on rooted GB27. How do I flash down?
Click to expand...
Click to collapse
You need to be on ICS modem, which can be flashed in cwm after you flash your ROM.
Sent from my SPH-D710 using xda premium

jdsingle76 said:
You need to be on ICS modem, which can be flashed in cwm after you flash your ROM.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Now, where do I find an ICS modem? And after I flash the safe kernal should I flash the ICS Modem with CWM and then CM 10.1 Or does it not matter?

eddytheyeti2 said:
Now, where do I find an ICS modem? And after I flash the safe kernal should I flash the ICS Modem with CWM and then CM 10.1 Or does it not matter?
Click to expand...
Click to collapse
Google is your friend . Here's all modems for the E4GT. And flash the ROM first, then the modem, then reboot, and profit!
http://forum.xda-developers.com/showthread.php?t=1764210&page=2
Sent from my SPH-D710 using xda premium

Thank you to all that helped out. I figured it all out, and am running FB27 modem.