Hello all, I have a question for you. I have a sprint epic 4g touch with the GB27 kernal. I want to flash a custom ROM though. I am rooted, with only the stock recovery. my question is how can i flas ha custom rom on the gb27 kernal. and which rom should I flash?
http://forum.xda-developers.com/showthread.php?t=1953783
If you scroll down a little bit to post 2 you'll see
Q. Now I am rooted, how do I install clockwork mod...
Click to expand...
Click to collapse
This will explain the process and as for a custom rom, I'd suggest that you look at a few and pick one that looks interesting to try; there are several excellent roms available for the E4GT.
mobile odin...in playstore or there is a free apk floating around on xda..once this is installed go grab a gb27 kernal withagats recovery from repository..and grab the el 29 direct boot kernal...el29 is safe to flash any rom from...download rom of choice..make sure this is all on ur root of sdcard...open mobile odin.click on kernal.go to ur el29 kernal and pick it and flash..odin will check md5,but u should too..once in recovery hit volume down , volume up , volume down..now ur power button is enabled as ur enter button..wipe data,wipe cache,wipe dalvik cache,in advanced....do anything specif from rom op that the dev says...read,read,read....lol..rom should have a kernal with it...u might have to flash gapps zip....reboot....if this is ur first time on jb...i suggest getting a one-click restore so ur system partition is right for jb...there r great guides in repository for all of this...dont forget to thank ur rom dev and rwillco and any others that helped....good luck and as always...im not responsible if ur phone blows up or ur microwave runs away...lol
I found an install method for cm 10.1 and ClockworkMod recovery. I need to be on ICS. I am on rooted GB27. How do I flash down?
It will still work, are you using mobile Odin to flash CWM
Sent from my SPH-D710 using Tapatalk 4 Beta
eddytheyeti2 said:
I found an install method for cm 10.1 and ClockworkMod recovery. I need to be on ICS. I am on rooted GB27. How do I flash down?
Click to expand...
Click to collapse
You need to be on ICS modem, which can be flashed in cwm after you flash your ROM.
Sent from my SPH-D710 using xda premium
jdsingle76 said:
You need to be on ICS modem, which can be flashed in cwm after you flash your ROM.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Now, where do I find an ICS modem? And after I flash the safe kernal should I flash the ICS Modem with CWM and then CM 10.1 Or does it not matter?
eddytheyeti2 said:
Now, where do I find an ICS modem? And after I flash the safe kernal should I flash the ICS Modem with CWM and then CM 10.1 Or does it not matter?
Click to expand...
Click to collapse
Google is your friend . Here's all modems for the E4GT. And flash the ROM first, then the modem, then reboot, and profit!
http://forum.xda-developers.com/showthread.php?t=1764210&page=2
Sent from my SPH-D710 using xda premium
Thank you to all that helped out. I figured it all out, and am running FB27 modem.
Related
Big thanks to RoadRAGEN for helping me figure out an ext4 issue! Odin this to get Deodexed stock EG30 with latest root and su binary and Busybox 1.18.4.
This does not wipe data.
I am not responsible for anything that happens to your phone. You do this at your own risk.
I have only tested this with the stock kernel and Bubby's CWM kernel.
Download​
IMPORTANT: Make sure you have installed the proper XP or Win7 drivers before starting. Also, remove the SD card from the phone (this may not be necessary, but having the SD card installed has caused Odin to fail for a number of people, so might as well just do it).
1. Extract the contents of the zip file to a folder
2. Open odin
3. Put your phone in download mode (Shut it off, wait for lights to all go out, then hold v-down + power)
4. connect phone (you should see odin put a Com4 or something like that in the first box. The actual number is NOT important what is important is something popped up there when you connected your device, meaning ODIN can see it)
5. The only box that should be checked is Auto Reboot.
6. You do not need to choose a pit file.
7. In the PDA Section choose the tar file. (Deodexed-Rooted-Busybox-EG30.tar)
8. Hit start. It will do its thing.
9. If it fails than try a new cable.
10. If the phone hangs for any reason take the battery and sdcard out and let it sit for an hour. Put it back together and try again.
reserved just in case
reserved again
Awesome crawrj. You do great work.
Sent From My Evo Killer!!!
Dumb question..... Will this flash the stock kernel that was released with the phone or is this the stock kernel source that is available from Samsung? Awesome Work sir!
Samsung Galaxy S II
Cannot wait to try, lol
stangdriverdoug said:
Dumb question..... Will this flash the stock kernel that was released with the phone or is this the stock kernel source that is available from Samsung? Awesome Work sir!
Samsung Galaxy S II
Click to expand...
Click to collapse
This does not contain a kernel. This is a stock file system that is rooted with busybox. I have tested on the root kernel and Bubby's CWM kernel. I have not tested on the Zedomax kernel.
Cool thanks!
Samsung Galaxy S II
File is up.
My phone is not rooted. If I flash this I will be rooted with the Kernel that was on the phone out of box? Also if I then flash Clock work recovery will it change the Kernel to the one others are claiming LOS on?
redram38 said:
My phone is not rooted. If I flash this I will be rooted with the Kernel that was on the phone out of box? Also if I then flash Clock work recovery will it change the Kernel to the one others are claiming LOS on?
Click to expand...
Click to collapse
That is correct. It will be just like flashing with the stock kernel which I have done. If you flash CWM it will change the kernel. Whether or not you get the LOS is up in the air. I have been using it for days and haven't had it yet.
Just so I have this straight, this is a stock rom, no kernel, deoxed so once installed I can flash a theme over it.
I flashed buddies kernel with cwm rooted and flashed back to the stock kernel is there anything I need to do with my kernel or can I just flash this rom?
Edit: he beat me to it, must have been typing at the same time.
Sent from my Samsung Epic Touch 4G
skyward01 said:
Just so I have this straight, this is a stock rom, no kernel, deoxed so once installed I can flash a theme over it.
I flashed buddies kernel with cwm rooted and flashed back to the stock kernel is there anything I need to do with my kernel or can I just flash this rom?
Sent from my Samsung Epic Touch 4G
Click to expand...
Click to collapse
That is correct. Just flash and go.
Im on starburst rom with zedomax v3..could i just flash the stock kernel and then flash this on top of starburst?
Awesome work. Does the Odin flash give you CWM as well? Or just SuperUser?
Sent from my Galaxy S II
jayv1717 said:
Im on starburst rom with zedomax v3..could i just flash the stock kernel and then flash this on top of starburst?
Click to expand...
Click to collapse
This will overwrite everything regardless of what setup you are on.
Sent from my SPH-D700 using xda premium
crawrj said:
That is correct. It will be just like flashing with the stock kernel which I have done. If you flash CWM it will change the kernel. Whether or not you get the LOS is up in the air. I have been using it for days and haven't had it yet.
Click to expand...
Click to collapse
Ok...so the only way to have CWM is to change the kernel? I guess rom manager doesn't work for flashing CWM? Sorry if its a stupid question but I have been all over these threads for a week trying to decide which way to root and which way is better.
Dj21o said:
Awesome work. Does the Odin flash give you CWM as well? Or just SuperUser?
Sent from my Galaxy S II
Click to expand...
Click to collapse
That what I was going to ask. You said we could flash a theme over this so I assume CWM is in there as well right?
Sent from my SPH-D700 using xda premium
JohnCorleone said:
This will overwrite everything regardless of what setup you are on.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
thanks bro.. One more question does this wipe internal sd card?
This does not have the kernel. I left it out for people to make their own decision on what kernel to use. Once we get a completely stock kernel with stock CWM I will update it. But for now it is just the system partion.
So let me try and get this right...I'm on fd26 stock rooted in order to flash a new ROM all I have to do is flash a GB kernel and not go back to GB fully, and if I wanna flash just a theme then I just use el29 kernel also is this correct? If not what are the steps I take to flash a new ics ROM from stock rooted fd26??? Thank You in advance!!!
Sent from my SPH-D710 using xda premium
sbeekman said:
So let me try and get this right...I'm on fd26 stock rooted in order to flash a new ROM all I have to do is flash a GB kernel and not go back to GB fully, and if I wanna flash just a theme then I just use el29 kernel also is this correct? If not what are the steps I take to flash a new ics ROM from stock rooted fd26??? Thank You in advance!!!
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
You have to flash the el26 CWM kernel (if you're on an ICS rom it won't boot because it's a GB kernel) then boot into recovery and you can flash stuff that way. If you do a theme, be sure to flash an ICS kernel after flashing the theme so it will boot normal again. Roms have kernels in them already so you don't have to worry about them.
Here's the el26 cwm kernel. http://forum.xda-developers.com/showthread.php?p=25017238
sbeekman said:
So let me try and get this right...I'm on fd26 stock rooted in order to flash a new ROM all I have to do is flash a GB kernel and not go back to GB fully, and if I wanna flash just a theme then I just use el29 kernel also is this correct? If not what are the steps I take to flash a new ics ROM from stock rooted fd26??? Thank You in advance!!!
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Honestly what you have to do is read the OP fully and do whatever is asked of you in there to make sure your phone is upgraded properly. Making new threads asking questions that may give you multiple answers may only confuse you further. I assume if you have to still ask this question with the amount of how to not brick and safe way to flash threads then you are still a little confused.
Best way to not have a paperweight is to follow whatever the OP's thread info to the letter. what rom you trying to flash
Jus' Sayin'
Yeah all I have done is went from stock to stock rooted and I have stayed stock rooted that's easy for me using the PC version of odin. I just wanted to start flashing new roms I have read all the posts and realize how not to brick I was simply wanting to know what would be the easiest way to go from stock rooted fd26 to like blazer ROM our mijjaz the goodness as I have not flashed using cwm recovery before...
Sent from my SPH-D710 using xda premium
I'm currently running the stock EL29 with root and CWM but whenever I try to install a custom rom (AOPK, CM9, etc...) through CWM, it says "Instillation Aborted" as if they weren't made for this phone when I know they were. What's going on?
.HaVoC. said:
I'm currently running the stock EL29 with root and CWM but whenever I try to install a custom rom (AOPK, CM9, etc...) through CWM, it says "Instillation Aborted" as if they weren't made for this phone when I know they were. What's going on?
Click to expand...
Click to collapse
Silly question, and not assuming, did you use autoroot for cwm?
May want to Odin to el26 and autoroot cwm ans try it that way.
I personally Odin back to el29, autoroot, and (knock on wood) never had an issue.
Sent from my SPH-D710 using XDA
.HaVoC. said:
I'm currently running the stock EL29 with root and CWM but whenever I try to install a custom rom (AOPK, CM9, etc...) through CWM, it says "Instillation Aborted" as if they weren't made for this phone when I know they were. What's going on?
Click to expand...
Click to collapse
Usually that happens on a bad download. Did you download them on your phone or PC?
It turns out that is was just the version of CWM that I was using but now I have a new problem. I flashed CM9 and everything worked EXCEPT the data connection so then I flashed AOPK and had the same problem. The only way I can get online is via wifi. How do I fix this?
.HaVoC. said:
It turns out that is was just the version of CWM that I was using but now I have a new problem. I flashed CM9 and everything worked EXCEPT the data connection so then I flashed AOPK and had the same problem. The only way I can get online is via wifi. How do I fix this?
Click to expand...
Click to collapse
Check you baseband in settings>about phone. If it says unknown then just flash a modem of your choice. This has happen to me. On several occasions.
Sent from my SPH-D710 using xda premium
.HaVoC. said:
It turns out that is was just the version of CWM that I was using but now I have a new problem. I flashed CM9 and everything worked EXCEPT the data connection so then I flashed AOPK and had the same problem. The only way I can get online is via wifi. How do I fix this?
Click to expand...
Click to collapse
Cool that ya got to flash from though!
Sorry, I don't use CM9.
I can try on my other e4gt later and test though.
Sent from my SPH-D710 using XDA
krazy_smokezalot said:
Check you baseband in settings>about phone. If it says unknown then just flash a modem of your choice. This has happen to me. On several occasions.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
It says "S710.10 S.EL29"
Isn't EL29 for GB only or something?
.HaVoC. said:
It says "S710.10 S.EL29"
Isn't EL29 for GB only or something?
Click to expand...
Click to collapse
No its ok to have an older modem and be running ICS. They can be "mismatched."
slick_rick said:
No its ok to have an older modem and be running ICS. They can be "mismatched."
Click to expand...
Click to collapse
And I have found, in the boonies that I'm in, el29 modem works the best for me on any ics builds..
Sent from my SPH-D710 using XDA
.HaVoC. said:
It says "S710.10 S.EL29"
Isn't EL29 for GB only or something?
Click to expand...
Click to collapse
Did u get it to work yet?? Try to Odin stock gb el29 rom. And start from scratch...
Sent from my SPH-D710 using xda premium
krazy_smokezalot said:
Did u get it to work yet?? Try to Odin stock gb el29 rom. And start from scratch...
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I started from scratch and followed all the steps until I ended up in the same boat. AOKP Build 38 working perfectly EXCEPT data. I tried the EL29 and FE10 kernels but neither made a difference.
.HaVoC. said:
I started from scratch and followed all the steps until I ended up in the same boat. AOKP Build 38 working perfectly EXCEPT data. I tried the EL29 and FE10 kernels but neither made a difference.
Click to expand...
Click to collapse
Try going back to gingerbread and flashing the EL26 kernal. Then flash the ICS rom you want through that recovery.
AOKP and CM9 have problems with data. every time you or system turn off screen say goodbye to data until 1.enable disable airplane mode or 2.reboot that's the main reason I stay away from these awesome roms until source arrives.
These roms are the best. IMO
1.odin back to stock el29 full reset oc
2.boot update profile and prl
3.copy the rom files to sd
4.turnitoff it off
4.enter download mode and flash el26+cmw for AOKP or el29+cwm direct boot for CM9
5.clear cache, factory data reset, clear dalvik on advance menu
6.go back and select install zip from sd card and choose the rom and flash it
7.flash gapps if apply
8.go back and select reboot system
9.enjoy these awesome roms.
Sent from my SPH-L710 using Tapatalk 2
I think I FINALLY got it to work. I started stock with rooted EL29 Odin-OC, flashed the "StockCWM-EL26.tar.m5d" in Odin, flashed the AOKP build 37 rom, flashed gapps, then flashed the FE16 kernel AND modem. When I rebooted the data was working.
Not that I am advocating this, and I am far from an expert, but I odin flash a stock rooted rom (SPH-D710.FC22_CL287574_ROOTED-oc-sfx) without going back to el29 just to have a nice clean stock rom to flash over with something else (like FIFO2). I just try to make sure I do everything in the same session so I don't get stuck in a stock recovery.
My order when flashing (non-Odin):
calkulin's format all
Modem (sometimes...if newer is available)
Rom
Kernel (with a custom recovery; sometimes the roms come with a stock recovery so if you reboot before installing a custom one, you'll have to either use odin to flash a custom recovery or mobile Odin)
any additional items that the rom didn't include (like gapps, etc.)
reboot
---------- Post added at 02:09 AM ---------- Previous post was at 01:58 AM ----------
Another thing to keep in mind is that AOKP was ported to the E4GT. That could cause issues depending on what you're coming from. Make sure to read all the instructions from the dev before flashing. If the worst happens, buy insurance on your phone and smash it...That's what I did with my evo when I bricked it.
I am trying to root build FH13 . Do I need to upgrade it to a different build to root or no . Are there any specific steps I need to follow for this build !!
smartguy10 said:
I am trying to root build FH13 . Do I need to upgrade it to a different build to root or no . Are there any specific steps I need to follow for this build !!
Click to expand...
Click to collapse
link: http://forum.xda-developers.com/showthread.php?t=1835033
Follow step by step. easy.
Then flash Agat's kenel in odin or mobile odin for a safe recovery. (.tar file)
link: http://forum.xda-developers.com/showthread.php?t=1767421
How do I flash clock mod recovery ?
smartguy10 said:
How do I flash clock mod recovery ?
Click to expand...
Click to collapse
Is there a goal you have in mind?
You wanted to root and g_ding answered that. And pointed you to a custom recovery.
If you state your goals, this conversation would go a lot faster.
Not trying to be rude, just if you have a target, it's a lot easier to answer.
And there's always this http://forum.xda-developers.com/showthread.php?p=24570230
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Thank you his instructions helped for rooting . Do I have to flash the kernel posted above as I want to flash AOSP ROMS and agat's kernel doesn't seem to work with AOSP ROMS ?. As what I am thinking is once the phone is rooted I can just flash the ROM I like and it should come with the kernel or I can swap the one I like .
smartguy10 said:
Thank you his instructions helped for rooting . Do I have to flash the kernel posted above as I want to flash AOSP ROMS and agat's kernel doesn't seem to work with AOSP ROMS ?. As what I am thinking is once the phone is rooted I can just flash the ROM I like and it should come with the kernel or I can swap the one I like .
Click to expand...
Click to collapse
In that case, i would suggest to Odin el26 cwm once you're rooted.
Be sure to read the entire thread of the ROM you'd like to flash. The op should have updated info if any flashing issues are noted but still take the time to read the thread.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
I downloaded Odin el26 cwm but whats needed to flash it . Can I use rom manager to flash this or no ?. Rooting this phone seems to be different then stock Andriod Phone
If u have a custom recovery just get su and binary zip and flash in recovery
If not go and root your phone by Odin king your phone to fh13 with root
Qbking has a great video just YouTube search root epic 4g touch fh13 root and look for qbking
Sent from my SPH-D710 using XDA
smartguy10 said:
I downloaded Odin el26 cwm but whats needed to flash it . Can I use rom manager to flash this or no ?. Rooting this phone seems to be different then stock Andriod Phone
Click to expand...
Click to collapse
If you followed what g_ding linked you to, and you applied the fh13 one click rooted, you can use Odin to apply the tar file. Just search for Odin or mobile odin.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
smartguy10 said:
I downloaded Odin el26 cwm but whats needed to flash it . Can I use rom manager to flash this or no ?. Rooting this phone seems to be different then stock Andriod Phone
Click to expand...
Click to collapse
Dont use ROM manager. Download any aosp/aokp/cm ROM you want. Follow the OP directions. Odin or mobile odin the el26 kernel/recovery. Wipe everything in recovery, cache, data, delvik cache and system. Then flash rom.
Sent from my SPH-D710 using XDA
I'm using stock rooted fh13. For whatever reason, my battery lasts over 20 hrs with that and my 4g works. My phone doesn't like any other rom. Aosp jb was super smooth but broke my 4g and yielded 3 hr battery drain
Sent from my SPH-D710 using Tapatalk 2
I want to install a new rom, but it says I need to install an ICS modem. And I was not clear on how to download and install this.
Sent from my SPH-D710 using xda app-developers app
Try here
http://forum.xda-developers.com/showthread.php?p=28564771
duckiepop said:
I want to install a new rom, but it says I need to install an ICS modem. And I was not clear on how to download and install this.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
You can find all the modems you'll ever need here.... http://forum.xda-developers.com/showthread.php?t=1764210 ..... I advise you to read up on flashing for this phone if you're new to this...rwilco's modem depot should have links to guides and you can grab the modem of choice..The newest ICS modem is fl24. You can flash modems in cwm recovery or use Odin..,just be sure you grab the right file for how you intend to flash it.(mobile Odin doesn't flash modems). I use cwm recovery a lot, works well​You will need to update you're PRL after flashing the modem..This can only be done on a touch wiz ROM,although I did read about some things in the works for aosp/aokp/cm ROMs(I haven't tried it yet).If you're going to a JB ROM,and its you're first time on JB, you need to flash a one-click with Odin..Read this.. http://forum.xda-developers.com/showthread.php?p=35539014#post35539014 ..If you are on Touch wiz, just down load the modem zip...flash via cwm..reboot and update prl.. Hope this helps...If you need help you can pm me or leave a post in my Q and A thread for slim ROM..Good Luck..