ICS modem - Samsung Epic 4G Touch

I want to install a new rom, but it says I need to install an ICS modem. And I was not clear on how to download and install this.
Sent from my SPH-D710 using xda app-developers app

Try here
http://forum.xda-developers.com/showthread.php?p=28564771

duckiepop said:
I want to install a new rom, but it says I need to install an ICS modem. And I was not clear on how to download and install this.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
You can find all the modems you'll ever need here.... http://forum.xda-developers.com/showthread.php?t=1764210 ..... I advise you to read up on flashing for this phone if you're new to this...rwilco's modem depot should have links to guides and you can grab the modem of choice..The newest ICS modem is fl24. You can flash modems in cwm recovery or use Odin..,just be sure you grab the right file for how you intend to flash it.(mobile Odin doesn't flash modems). I use cwm recovery a lot, works well​You will need to update you're PRL after flashing the modem..This can only be done on a touch wiz ROM,although I did read about some things in the works for aosp/aokp/cm ROMs(I haven't tried it yet).If you're going to a JB ROM,and its you're first time on JB, you need to flash a one-click with Odin..Read this.. http://forum.xda-developers.com/showthread.php?p=35539014#post35539014 ..If you are on Touch wiz, just down load the modem zip...flash via cwm..reboot and update prl.. Hope this helps...If you need help you can pm me or leave a post in my Q and A thread for slim ROM..Good Luck..

Related

[Q] ICS ROMs

Hello!
If there is a thread for this already this can be deleted and I would like to be shown the link, but from what I can tell most threads are old info or a bit misleading.
So right now I'm running an ICS ROM. I hadn't looked into the fact that going from ICS to a new ICS ROM back brick the phone, so I looked a bit more into it. From what I gathered, using a recovery on and ICS rom to install a new ICS ROM has a CHANCE to brick the phone?
If this is true, what is the easiest way to go from one rom to another? For my recent ROM I used the guide where I use odin mode to install the stock GB ROM then use another tool to get CWM on my phone then use THAT to install the ROM.
So my main question, is, is that the easiest way to go about changing between ICS roms? Can mobile ODIN be used more effectively? If that's what I have to do that's what I have to do....but I feel like there should be an easier way....hopefully.
Thank you all and thank you devs for all of your hard work!
There's an el26 + cwm kernel our there. I know you can get it from several threads to include the Frankenstein rom. All you need to do is mobile Odin that flash and as long as what rom you flash has an ics kernel you are good to go. No need for multiple flashes and odins
Sent from my GT-P7510 using xda premium
Ya mobile Odin makes it ez. Flash a non-stock recovery kernel prefferably the el26 cwm on mobile Odin then in cwm use calkulins wipe all zip then flash rom of choice
Sent from my SPH-D710 using xda premium

Getting error on new update LG8

I got the little pop up that there was an update so I installed it and it said the phone was going to boot in 6 seconds or whatever, after that the phone booted into CWM and it said it failed install. Now every time I check for an update it says there's no update right now. Am I the only one with this problem? How do I fix it? Is it because I'm rooted? I'm on the stock rom by the way.
jordan23945bulls said:
I got the little pop up that there was an update so I installed it and it said the phone was going to boot in 6 seconds or whatever, after that the phone booted into CWM and it said it failed install. Now every time I check for an update it says there's no update right now. Am I the only one with this problem? How do I fix it? Is it because I'm rooted? I'm on the stock rom by the way.
Click to expand...
Click to collapse
Yes, it is because you are rooted. Download the stock rooted DeOdex one done by freeza. Good stuff.
Sent from my SPH-L710 using xda premium
Naddict said:
Yes, it is because you are rooted. Download the stock rooted DeOdex one done by freeza. Good stuff.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I need to flash the Lg8 firmware and Other parts? Or does it not work if I don't? I have never flashed anything using Odin, could I get steps? Thanks. Also what if I want to flash another rom? Do I need to flash the lg8 firmware and other parts again?
jordan23945bulls said:
I need to flash the Lg8 firmware and Other parts? Or does it not work if I don't? I have never flashed anything using Odin, could I get steps? Thanks. Also what if I want to flash another rom? Do I need to flash the lg8 firmware and other parts again?
Click to expand...
Click to collapse
see here http://forum.xda-developers.com/showthread.php?t=1743923
you don't need to flash the modem if you don't want to. Although I think (opinion only, and they vary between user) LG8 is a very good modem right now.
Once you flash modem, you will keep it until you revert or flash a newer modem or a rom specifically tells you it also provides it.
Naddict said:
see here http://forum.xda-developers.com/showthread.php?t=1743923
you don't need to flash the modem if you don't want to. Although I think (opinion only, and they vary between user) LG8 is a very good modem right now.
Once you flash modem, you will keep it until you revert or flash a newer modem or a rom specifically tells you it also provides it.
Click to expand...
Click to collapse
Alright, so I don't need to flash the moden or the other parts if I'm flashing an lg8 rom.
Naddict said:
Yes, it is because you are rooted. Download the stock rooted DeOdex one done by freeza. Good stuff.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
So flash the DeOdex version via CWR.
Then flash the Modem.zip via CWR.
Then use Odin and flash "Other Parts" .tar file and that's it?
Will there be any differentiation between going this route versus unrooting -> OTA update -> re-rooting?
The way I flash I got the legit update and flash with custom recovery and before the reboot flash the team win root file and ur done then reboot and ur done u have the hole update and firmware and radio and rooted and u keep your custom recovery
Sent from my SPH-L710 using xda premium

Rooting Build FH13

I am trying to root build FH13 . Do I need to upgrade it to a different build to root or no . Are there any specific steps I need to follow for this build !!
smartguy10 said:
I am trying to root build FH13 . Do I need to upgrade it to a different build to root or no . Are there any specific steps I need to follow for this build !!
Click to expand...
Click to collapse
link: http://forum.xda-developers.com/showthread.php?t=1835033
Follow step by step. easy.
Then flash Agat's kenel in odin or mobile odin for a safe recovery. (.tar file)
link: http://forum.xda-developers.com/showthread.php?t=1767421
How do I flash clock mod recovery ?
smartguy10 said:
How do I flash clock mod recovery ?
Click to expand...
Click to collapse
Is there a goal you have in mind?
You wanted to root and g_ding answered that. And pointed you to a custom recovery.
If you state your goals, this conversation would go a lot faster.
Not trying to be rude, just if you have a target, it's a lot easier to answer.
And there's always this http://forum.xda-developers.com/showthread.php?p=24570230
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Thank you his instructions helped for rooting . Do I have to flash the kernel posted above as I want to flash AOSP ROMS and agat's kernel doesn't seem to work with AOSP ROMS ?. As what I am thinking is once the phone is rooted I can just flash the ROM I like and it should come with the kernel or I can swap the one I like .
smartguy10 said:
Thank you his instructions helped for rooting . Do I have to flash the kernel posted above as I want to flash AOSP ROMS and agat's kernel doesn't seem to work with AOSP ROMS ?. As what I am thinking is once the phone is rooted I can just flash the ROM I like and it should come with the kernel or I can swap the one I like .
Click to expand...
Click to collapse
In that case, i would suggest to Odin el26 cwm once you're rooted.
Be sure to read the entire thread of the ROM you'd like to flash. The op should have updated info if any flashing issues are noted but still take the time to read the thread.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
I downloaded Odin el26 cwm but whats needed to flash it . Can I use rom manager to flash this or no ?. Rooting this phone seems to be different then stock Andriod Phone
If u have a custom recovery just get su and binary zip and flash in recovery
If not go and root your phone by Odin king your phone to fh13 with root
Qbking has a great video just YouTube search root epic 4g touch fh13 root and look for qbking
Sent from my SPH-D710 using XDA
smartguy10 said:
I downloaded Odin el26 cwm but whats needed to flash it . Can I use rom manager to flash this or no ?. Rooting this phone seems to be different then stock Andriod Phone
Click to expand...
Click to collapse
If you followed what g_ding linked you to, and you applied the fh13 one click rooted, you can use Odin to apply the tar file. Just search for Odin or mobile odin.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
smartguy10 said:
I downloaded Odin el26 cwm but whats needed to flash it . Can I use rom manager to flash this or no ?. Rooting this phone seems to be different then stock Andriod Phone
Click to expand...
Click to collapse
Dont use ROM manager. Download any aosp/aokp/cm ROM you want. Follow the OP directions. Odin or mobile odin the el26 kernel/recovery. Wipe everything in recovery, cache, data, delvik cache and system. Then flash rom.
Sent from my SPH-D710 using XDA
I'm using stock rooted fh13. For whatever reason, my battery lasts over 20 hrs with that and my 4g works. My phone doesn't like any other rom. Aosp jb was super smooth but broke my 4g and yielded 3 hr battery drain
Sent from my SPH-D710 using Tapatalk 2

[TOOL/GUIDE] [VIDEO] How To Use ODIN To Flash Official JB Firmware On T-Mobile T999!

First off I would like to Thank DocHoliday77 for his amazing guide and work published for The Official Stock Firmware and Leaked OTA's!!!
For models T999 and T999V. I would also like to thank mrRobinson for the pre-rooted root66 firmware packages.
What you will find here is a video to show you how to install the official JB firmware via ODIN and using the root66 firmware. I am not responsible for broken devices and before attempting any of this you should read the official thread put together by DocHoliday77 which can be found HERE!!!
I forgot to mention a couple of things in the video...
1. Read the directions from DocHoliday77's thread!
2. Before starting back up all your data, just in case!
3. Do a data factory reset!
4. Download all necessary files you will need... All can be found in DocHoliday77's thread.
5. Don't blame me if you mess something up..I made the video only, in real time.
6. The video only covers the ODIN method via root66 firmware on a T-Mobile T999 device.
Once ODIN is done and you get a PASS you will need to re-install a custom recovery. You can get goo manager from playstore to install TWRP or rom manager to install CWR. When you are all done reinstalling recovery you can then restore a JB backup you already have or start downloading JB rom of your choice.
akapaul26 said:
First off I would like to Thank DocHoliday77 for his amazing guide and work published for The Official Stock Firmware and Leaked OTA's!!!
For models T999 and T999V. I would also like to thank mrRobinson for the pre-rooted root66 firmware packages.
What you will find here is a video to show you how to install the official JB firmware via ODIN and using the root66 firmware. I am not responsible for broken devices and before attempting any of this you should read the official thread put together by DocHoliday77 which can be found HERE!!!
I forgot to mention a couple of things in the video...
1. Read the directions from DocHoliday77's thread!
2. Before starting back up all your data, just in case!
3. Do a data factory reset!
4. Download all necessary files you will need... All can be found in DocHoliday77's thread.
5. Don't blame me if you mess something up..I made the video only, in real time.
6. The video only covers the ODIN method via root66 firmware on a T-Mobile T999 device.
Once ODIN is done and you get a PASS you will need to re-install a custom recovery. You can get goo manager from playstore to install TWRP or rom manager to install CWR. When you are all done reinstalling recovery you can then restore a JB backup you already have or start downloading JB rom of your choice.
Click to expand...
Click to collapse
GOD BLESSS YOUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU!!!!!!!!:victory::victory::victory::highfive::highfive::highfive:
That's great. thanks for share.
No worries...if it helps one person Im happy!
Sent from my Wicked fast SGS3!
OK before I Odin the latest job firmware.. I have one more question : what kernel and ROM should I be on (just to be on the safe side) or modem? I'm currently on paranoid androids latest rom, on uvli8 modem.. what should I do? Do I just go to my recovery and factory reset and wipe cache and dalvic? Then Odin... idk that is my only concern before I go any further..thanks in advance and once again thanks for the videoooo
Sent from my SGH-T999 using xda app-developers app
Slicktune said:
OK before I Odin the latest job firmware.. I have one more question : what kernel and ROM should I be on (just to be on the safe side) or modem? I'm currently on paranoid androids latest rom, on uvli8 modem.. what should I do? Do I just go to my recovery and factory reset and wipe cache and dalvic? Then Odin... idk that is my only concern before I go any further..thanks in advance and once again thanks for the videoooo
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Replied to your pm!
Sent from my Wicked fast SGS3!
thanks for this
My question is when I download root66 its not a zip file that gets downloaded to my lap top. Any suggestions?
Sent from my SGH-T999 using xda app-developers app
@Tdeljr
Its not supposed to be .zip format...once you dl the file to your pc you will need to extract the .tar.md5 file, this will be the file you flash to your device. I think that is in the video. It is also covered in DocHoliday77's thread!
Sent from my Wicked fast SGS3!
Thats my bad, I had a brain malfunction. I had to many things in my download folder and confused myself. Sorry.
Sent from my SGH-T999 using xda app-developers app
Now that odin is well known, at least how to odin stock jb, just wondering if anyone else has benefitted from the video? Anyone can use it, wanted to refresh the thread for the sake of new sgs3 users who also might be lost in the mix!
Sent from my SGH-T999 using Xparent BlueTapatalk 2

[Q] Flashing custom ROM help

Hello all, I have a question for you. I have a sprint epic 4g touch with the GB27 kernal. I want to flash a custom ROM though. I am rooted, with only the stock recovery. my question is how can i flas ha custom rom on the gb27 kernal. and which rom should I flash?
http://forum.xda-developers.com/showthread.php?t=1953783
If you scroll down a little bit to post 2 you'll see
Q. Now I am rooted, how do I install clockwork mod...
Click to expand...
Click to collapse
This will explain the process and as for a custom rom, I'd suggest that you look at a few and pick one that looks interesting to try; there are several excellent roms available for the E4GT.
mobile odin...in playstore or there is a free apk floating around on xda..once this is installed go grab a gb27 kernal withagats recovery from repository..and grab the el 29 direct boot kernal...el29 is safe to flash any rom from...download rom of choice..make sure this is all on ur root of sdcard...open mobile odin.click on kernal.go to ur el29 kernal and pick it and flash..odin will check md5,but u should too..once in recovery hit volume down , volume up , volume down..now ur power button is enabled as ur enter button..wipe data,wipe cache,wipe dalvik cache,in advanced....do anything specif from rom op that the dev says...read,read,read....lol..rom should have a kernal with it...u might have to flash gapps zip....reboot....if this is ur first time on jb...i suggest getting a one-click restore so ur system partition is right for jb...there r great guides in repository for all of this...dont forget to thank ur rom dev and rwillco and any others that helped....good luck and as always...im not responsible if ur phone blows up or ur microwave runs away...lol
I found an install method for cm 10.1 and ClockworkMod recovery. I need to be on ICS. I am on rooted GB27. How do I flash down?
It will still work, are you using mobile Odin to flash CWM
Sent from my SPH-D710 using Tapatalk 4 Beta
eddytheyeti2 said:
I found an install method for cm 10.1 and ClockworkMod recovery. I need to be on ICS. I am on rooted GB27. How do I flash down?
Click to expand...
Click to collapse
You need to be on ICS modem, which can be flashed in cwm after you flash your ROM.
Sent from my SPH-D710 using xda premium
jdsingle76 said:
You need to be on ICS modem, which can be flashed in cwm after you flash your ROM.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Now, where do I find an ICS modem? And after I flash the safe kernal should I flash the ICS Modem with CWM and then CM 10.1 Or does it not matter?
eddytheyeti2 said:
Now, where do I find an ICS modem? And after I flash the safe kernal should I flash the ICS Modem with CWM and then CM 10.1 Or does it not matter?
Click to expand...
Click to collapse
Google is your friend . Here's all modems for the E4GT. And flash the ROM first, then the modem, then reboot, and profit!
http://forum.xda-developers.com/showthread.php?t=1764210&page=2
Sent from my SPH-D710 using xda premium
Thank you to all that helped out. I figured it all out, and am running FB27 modem.

Categories

Resources