I am having issues with teamviewer quick support on the new nexus 7. I have rooted the device and I can connect to it from a computer which works fine. I see the remote control button but when I click it, i see a connecting box that never goes to anything. If I click somewhere on that blue connecting box I can see a black screen that comes up which should be showing the display of the device but no dice. Has anyone had any luck?
I wonder if it has something to do with the high resolution display of the new nexus that can't be ported to the computer trying to connect to it, but I could be totally wrong.
Any help would be greatly appreciated.
carrco said:
I am having issues with teamviewer quick support on the new nexus 7. I have rooted the device and I can connect to it from a computer which works fine. I see the remote control button but when I click it, i see a connecting box that never goes to anything. If I click somewhere on that blue connecting box I can see a black screen that comes up which should be showing the display of the device but no dice. Has anyone had any luck?
I wonder if it has something to do with the high resolution display of the new nexus that can't be ported to the computer trying to connect to it, but I could be totally wrong.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Same here. Works fine with N4 but with new N7 no luck.
Related
Hello all. I'm TK, newb who has been lurking for a while. The forum has led me to some awesome changes with my Evo, but that may be catching up with me. I'm still rooted and running CM 7 with SZ 1.01, and none of my computers are able to recognize the USB drive on my phone, regardless of which cable I use.
I can't get ADB to work on my PC, so I'm not able to perform any commands for the phone.
Can anyone help me with this issue? It would be much appreciated. Thanks!
Do you have debugging(in application settings) on when trying to use adb? What about allow mock locations? Try turning debugging off and then turn it back on(while plugged in USB). If that doesn't work you could always go to recovery mode and enable USB toggle and get it connected that way. Also make sure you're actually pulling down the notification bar and selecting "mount".
Sent from my PC36100 using Tapatalk
CrucialTK said:
Hello all. I'm TK, newb who has been lurking for a while. The forum has led me to some awesome changes with my Evo, but that may be catching up with me. I'm still rooted and running CM 7 with SZ 1.01, and none of my computers are able to recognize the USB drive on my phone, regardless of which cable I use.
I can't get ADB to work on my PC, so I'm not able to perform any commands for the phone.
Can anyone help me with this issue? It would be much appreciated. Thanks!
Click to expand...
Click to collapse
Does your phone get recognized at all on your computer when you plug it in? If not you may have a hardware problem -> usb port is loose.
On my original cord that came with the phone I had to trim off about 2 centimeters off of the plastic to go in far enough to have my Toshiba laptop to read it. I have had to do the same thing to several cords since. Maybe your usb?
alexisprz said:
Does your phone get recognized at all on your computer when you plug it in? If not you may have a hardware problem -> usb port is loose.
Click to expand...
Click to collapse
Yes, my computer just says that it doesn't recognize the hardware. it charges just fine by the computer.
I'm running ClockworkMod for my recovery, I'll check for USB Toggle there.
No joy on finding USB Toggle.
It's called something different. Can't remember but it's there, I believe. I've only been in Clockwork recovery like once.
Hopefully you guys can help me out. I'm suddenly having issues with my phone not being detected by my PCs when it is connected via USB.
When i plug my phone into my PC, i receive the error message: "UBS Device not Recognized One of the USB devices attached to this computer has malfunctioned, and windowes does not recognize it." from my Windows XP PC. My Windows 7 PC is unable to recognize the device plugged in.
The strange thing is that even though my phone is not being recognized by the PCs, the phone will still charge.
The phone is not in USB Debugging Mode, and I've gone ahead and flashed 2 separate Kernals on my phone, but i still am having this issue. I have tested this out with 3 USB cables, on 3 separate computers (Work (win xp), Home (win7), and friends(win7)).
2 Days ago the USB worked fine for me as i was able to flash Franco Kernal and JB onto my Gnex, but suddenly it's not being recognized by my computer anymore.
Stumped.....Hoping that this isn't a hardware issue and something that i can fix without having any downtime away from my phone.
Any thoughts?
Try other USB port and other USB cable.
Sounds like you're missing some drivers... Remove the device completely in Device Manager & plug it again. For MTP, Windows 7 should find the drivers online by itself. If you need fastboot access, you'll have to download the seperate drivers for that. I'd recommend the GNex Toolkit in that case since it comes with the drivers included (you'll still need to install them of course )
Gunthy` said:
Sounds like you're missing some drivers... Remove the device completely in Device Manager & plug it again. For MTP, Windows 7 should find the drivers online by itself. If you need fastboot access, you'll have to download the seperate drivers for that. I'd recommend the GNex Toolkit in that case since it comes with the drivers included (you'll still need to install them of course )
Click to expand...
Click to collapse
Thx for the reply,
Yes, I have been using the GNEX tool kit, though not the 7.3 version that was released today. The 7.2 version was being used at home and on my work PC. I usually install the drivers from the toolkit then plug my phone in when done. The drivers have been recognizing my phone but not since 2 days go.
I'm currently trying to find the MTP checkbox in the phone Settings to double check if it's checked, but im having problems locating it.
thepce said:
I'm currently trying to find the MTP checkbox in the phone Settings to double check if it's checked, but im having problems locating it.
Click to expand...
Click to collapse
Go to Settings > Storage > tap top right menu to display USB computer connection option & tap it
Gunthy` said:
Go to Settings > Storage > tap top right menu to display USB computer connection option & tap it
Click to expand...
Click to collapse
Ah yes, that is where it was hiding....But unfortunately the checkbox is checked.
This seems like a hardware issue, but I'm not certain since the phone still recharges when plugged in
thepce said:
Ah yes, that is where it was hiding....But unfortunately the checkbox is checked.
This seems like a hardware issue, but I'm not certain since the phone still recharges when plugged in
Click to expand...
Click to collapse
Could be... Charging doesn't necessary have anything to do with data transfer AFAIK... Do you see something in the Device Manager when you plug it? You might have to right click & do a re-scan to force detection.
Gunthy` said:
Could be... Charging doesn't necessary have anything to do with data transfer AFAIK... Do you see something in the Device Manager when you plug it? You might have to right click & do a re-scan to force detection.
Click to expand...
Click to collapse
Device Managers shows "Samsung Galaxy Nexus ADB Interface". The drivers look to be installed.
Also another odd thing, is that after i charge my phone and unplug it from my PC, it will continue to show that it is charging on the lock screen and in the top right corner of my phone. However if i go into Settings ---> about phone. It shows Battery Status : Not Charging.
thepce said:
Device Managers shows "Samsung Galaxy Nexus ADB Interface". The drivers look to be installed.
Click to expand...
Click to collapse
You get that when the phone is running normally? I think for me that one only shows up when I put it in bootloader mode. In MTP mode it's just a media device like any other AFAIK... I'll check tomorrow when I'm back on my Windows laptop to be sure . Have you tried putting it in PTP mode? If so do you see the device as a camera or is it the same issue?
thepce said:
Also another odd thing, is that after i charge my phone and unplug it from my PC, it will continue to show that it is charging on the lock screen and in the top right corner of my phone. However if i go into Settings ---> about phone. It shows Battery Status : Not Charging.
Click to expand...
Click to collapse
Sounds like a software bug, but I'll admit it is a bit strange considering your main issue...
Hello i have a question too on Usb subject. forgive me for go off topic over here is there anyway to get my music be playing in the car radio tru usb with my first google phone it worked like a charm model Htc google nexus one just plugged it in en voila music came out..but with the gnex won,t work thanks in advanced
thepce said:
Device Managers shows "Samsung Galaxy Nexus ADB Interface". The drivers look to be installed.
Also another odd thing, is that after i charge my phone and unplug it from my PC, it will continue to show that it is charging on the lock screen and in the top right corner of my phone. However if i go into Settings ---> about phone. It shows Battery Status : Not Charging.
Click to expand...
Click to collapse
Google galaxy nexus nfc battery. either the battery or the port is shot. People having issues.
And get your drivers from Samsung and Android sdk. Qbking77 has a YouTube video on how to set it up.
Android is upgrading...
Lizard78 said:
Hello i have a question too on Usb subject. forgive me for go off topic over here is there anyway to get my music be playing in the car radio tru usb with my first google phone it worked like a charm model Htc google nexus one just plugged it in en voila music came out..but with the gnex won,t work thanks in advanced
Click to expand...
Click to collapse
Basically the way the Nexus One talked to other systems through USB is completely different from the way the Galaxy Nexus does. The GN uses a new protocol called MTP. Your car stereo probably can't read the files on your phone because it doesn't have MTP support.
Phantom Charging Issue
So I've gone ahead and Fiddled around with my phone for the past day trying to fix my USB issue, and I've discovered that this issue may not be due to USB issues.
Throughout the day when i was playing around and trying to fix my USB recognizing issue, it miraculously started working again. Now I am able to connect to my PCs and transfer the desired files.
Upon this issue being resolved, i noticed that periodically the screen would turn on, on it's own while being off in the locked state. I observed this issue to see what may be causing this, and it is turning on due to my phone thinking that i plugged my micro USB cable in to charge it. The charging indicator on the batter flips on, and even the USB Debugger / MTP Notification is present in the notification drawer.
Apparently this is a known issue with the Battery or charging port with Gnex's. (See below the 2 youtube clips for more details for problem/fix.)
https://www.youtube.com/watch?v=47PIdXf25X0
https://www.youtube.com/watch?v=KD6yYLnO6ig
I believe my warranty is void since this phone was purchased in a different country and has had the bootload locked/unlocked a million times. Anyone else have this problem that they have been able to fix manually? Or am I going to have to cross my fingers, ship my phone to get it fixed, and hope the post man doesn't f**k up?
Delete
A few months ago I plugged my gn into the pc and nothing happened. The pc use to recognize it and i would transfer files ect. now nothing. I have turned off usb fast charge and it still doesnt work. I also just purchased a samsung MHL and it doesnt work either. I had it plugged in and turned on NFL mobile app and it said (error tv out plugged in) so the phone knows it is there but i get nothing out to the tv. yes I have the power plugged into the device. The phone screen does go into side view as soon as I plug it in but nothing shows up on the tv. Im wondering if something is wrong with my phone or if there is a setting im not aware of since both of these are not working.
Im running aokp jb 3 and faux kernel. I would appreciate any help with these issues.
jbfuson said:
A few months ago I plugged my gn into the pc and nothing happened. The pc use to recognize it and i would transfer files ect. now nothing. I have turned off usb fast charge and it still doesnt work. I also just purchased a samsung MHL and it doesnt work either. I had it plugged in and turned on NFL mobile app and it said (error tv out plugged in) so the phone knows it is there but i get nothing out to the tv. yes I have the power plugged into the device. The phone screen does go into side view as soon as I plug it in but nothing shows up on the tv. Im wondering if something is wrong with my phone or if there is a setting im not aware of since both of these are not working.
Im running aokp jb 3 and faux kernel. I would appreciate any help with these issues.
Click to expand...
Click to collapse
Try flashing a different kernel for ****'s and giggles. I haven't used MHL with faux yet but I know it works on LeanKernel. Just a shot in the dark.
~~~~There is no spoon~~~~
even i am facing the same issue. i have stock jb version on my galaxy nexus (intl version) and when i connect the MHL cable, the screen rotates side ways but nothing gets displayed on TV. let me know if you have tried flashing with a different kernel. Appreciate your help.
Bought the 'official' usb to usb3 lead from the Play store. When I tried connecting to my Macbook Pro the Android File Transfer can't find the Nexus. I thought it might be the USB Debugging needs enabling so I did that. Nope. Maybe the Android File Transfer needed updating so updated it. No joy. I'm a bit lost now, can anyone shed any light on my problem?
Mine would say something about the screen being locked even though it wasn't.. When you plug it in, pull down the notification drawer and tap the Choose More USB Options, or whatever it says. Make sure File Transfer is selected and try again.. took mine a few times of switching between FTP and Charging but it works with my Mac now
tpayne2345 said:
Mine would say something about the screen being locked even though it wasn't.. When you plug it in, pull down the notification drawer and tap the Choose More USB Options, or whatever it says. Make sure File Transfer is selected and try again.. took mine a few times of switching between FTP and Charging but it works with my Mac now
Click to expand...
Click to collapse
Ok, thanks, I'll try switching between MTP and charging a few times like that.
I have no trouble. Have a 2012 MBP using El Capitan.
Sent from my Nexus 5X using Tapatalk
tpayne2345 said:
Mine would say something about the screen being locked even though it wasn't.. When you plug it in, pull down the notification drawer and tap the Choose More USB Options, or whatever it says. Make sure File Transfer is selected and try again.. took mine a few times of switching between FTP and Charging but it works with my Mac now
Click to expand...
Click to collapse
More thanks. I had to switch it between charging and MTP 5 times to get it but it worked in the end.
Is there any way to making the MTP setting sticky for trusted devices? When you connect with usb debugging, it asks you to verify and save the device. If something like that was possible with this setting, you could have the security of not auto enabling when charging from random devices but the convenience when connected to your own remembered computer.
This solved my problem!
tpayne2345 said:
Mine would say something about the screen being locked even though it wasn't.. When you plug it in, pull down the notification drawer and tap the Choose More USB Options, or whatever it says. Make sure File Transfer is selected and try again.. took mine a few times of switching between FTP and Charging but it works with my Mac now
Click to expand...
Click to collapse
This was also my problem. Thank you tpayne! This solved my problem!
Hey guys, my watch tells me they're disconnected and my phone says it's connected, why is that? Does anyone else see this? Should i factory reset the watch?
Thanks
Edit: Damn it, i forgot to attach the attachments. While editing if won't allow me to attach them.
There, attached
tolymatev said:
There, attached
Click to expand...
Click to collapse
No mines as should be connected on both S7 + Huawei watch
Yep, mine exactly the same. When I scan for other bluetooth devices on my watch.......nothing. My phone (HTC 10) shows watch is connected, and when scanning for other bluetooth devices it picks up the watch!
Same here on my 6P. Says not connected. Looks exactly like your screen shots. I just came here to check & glad to see I'm not alone. I tried everything to show connected last night and finally gave up. However It does appear to be connected. Who knows.
Sent from my Nexus 6P using Tapatalk
The same here (OnePlus 3T).
There is no problem with connection itself, it just says it's disconnected in the watch settings.
I have the very same issue and came here looking for a remedy to the problem. I have my watch connected to the LG V10.
Anyone try factory resetting the watch ?
DarkManX4lf said:
Anyone try factory resetting the watch ?
Click to expand...
Click to collapse
I have, same thing.