Develop Bugs

[Q] Anyone seen a good play-through case

Has anyone found any play-through form fit cases for the A100?
Right now I've got a Belkin neoprene sleave that protects it in my bag, but there have been a few times where I've been knocked into and had the tablet go flying, or simply dropped it (thats one slippery device!!). So a play-through form fit case would be perfect.
I contacted a few accessory stores here in Canada but with no luck. Figured someone else out there would have seen SOMETHING.
Thanks

I use the actual Acer case. It's not bad.
Sent from my A100 using XDA Premium App

try this ，nice sleeve
http://www.ebay.com/itm/150672895049?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

A100 Cases
us-store.acer.com
ACER finally has their Accessory store up and showing all the goodies. I bought the CARBON FIBER case which is $40 US. I also have the Black case $30 US but the Carbon fiber is much better quality. Looks like they also have some Silcone cases (bumper cases) they call them.

xjumbotx said:
us-store.acer.com
ACER finally has their Accessory store up and showing all the goodies. I bought the CARBON FIBER case which is $40 US. I also have the Black case $30 US but the Carbon fiber is much better quality. Looks like they also have some Silcone cases (bumper cases) they call them.
Click to expand...
Click to collapse
Nice! The carbon fiber case is exactly what I was hoping to find...as are the bumper cases actually. I find the A100 to be really really slippery, and there have been a lot of times where I'm using it in bed while going to sleep and nodded off...of course dropping the A100 in the process
Luckily it's a tough little beast and survived the short falls from my bed.
Now, the question is...trying to find this stuff in Canada!

The Source
rcummings100 said:
Has anyone found any play-through form fit cases for the A100?
Click to expand...
Click to collapse
I'm not sure what you mean by "play-through", but if you mean a case that lets you use the tablet without removing it from the case, then this one from The Source :
http://www.thesource.ca/estore/prod...e&category=Tablet-accessories&product=1719056
might fit your needs.
It has served me well for the past month.

jschall said:
I'm not sure what you mean by "play-through", but if you mean a case that lets you use the tablet without removing it from the case, then this one from The Source :
http://www.thesource.ca/estore/prod...e&category=Tablet-accessories&product=1719056
might fit your needs.
It has served me well for the past month.
Click to expand...
Click to collapse
Yeah, thats exactly what play-through means in the case world
I'll check that out. Thanks.
I JUST ordered the official Acer Carbon Fiber case previously mentioned in this thread. Canadian suppliers started getting them this week and I was able to custom order it from a local computer store. Unfortunately it's on order still with the supplier (Synnex Canada) with no ETA.

http://www.amazon.com/Poetic-Leathe...IETO/ref=sr_1_1?ie=UTF8&qid=1318615830&sr=8-1
this case looks promising, but it is a preorder onle right now.
Best Buy is now selling the Acer cases on their site. Probably cheaper shipping than Acer's 10 buck shipping. http://www.bestbuy.com/site/Acer+-+...10275571&skuId=3530371&st=acer case&cp=1&lp=3

Thanks for the link, carbon case is on the way. The tablet keeps sliding down in the Acer naugahide one.
Sent from my A100 using XDA Premium App

Just got my carbon fiber look, acer case today, excellent choice. feels good in the hand, will have to see how it holds up over time.

I'm thinking of ordering this as well to see how it is.
rooCASE Ultra Slim (Black) Leather Case Cover Cover with Stand for Acer Iconia Tab A100 7-Inch Android Tablet Wi-Fi
http://www.amazon.com/rooCASE-Leath...C2OQ/ref=sr_1_8?ie=UTF8&qid=1318998536&sr=8-8
This is a skin rather than a true case, but what do you think of this?
Black Carbon Fiber Film Shield & Screen Protector for Acer Iconia Tab A100 7-Inch Tablet - Armorsuit MilitaryShield
http://www.amazon.com/Carbon-Shield...4XQ2/ref=sr_1_6?ie=UTF8&qid=1318998536&sr=8-6
I ordered one yesterday to try out.

Great case for A100
I purchased this case about a month ago. It was sent from China so it takes at least 3 weeks to arrive .
After a week of break in period the case feels great to the hands. The leather used on the outside of the case acquires a nice soft feel and has NO leather smell like the Acer smelly case.
All ports and buttons are accessible and the A100 hold firmly in the case with no screen visibility restrictions.
The case open steno style as opposed to book style in the portrait screen position.
As a bonus they also include a very nice NON glare screen protector.
$16.95 with free shipping....it's a great deal.
http://www.skindigitalstore.com/categories/Acer-Iconia-Tab-A100/
Product Description
Compatible with: Acer Iconia Tab A100 with 7-inch display tablet (Not for W100, A500, W500)
High quality GENUINE LEATHER (Not synthetic/faux leather) case designed to fit perfectly your Acer Iconia Tab A100 7"
Soft genuine leather outer/inner gives tactile and aesthetic appeal and adds strength and durability to the case
Rigid yet flexible exterior with a soft padded microfiber interior
Contrasting white stitching to add a distinct level of style
Cut outs allow access to all buttons, ports and sensors
The case is designed to fold back, so you can read with just one hand
The front flap can be used as a stand for a comfortable viewing angle
Provides excellent protection from scratches and bumps
Ultra secure magnetic closure
Stylish, compact & lightweight
Easy to install and remove!
Package content:
1 x Black genuine leather case for Acer Iconia Tab A100 (Tablet not included)
1 x Anti-Glare screen protector and cleaning cloth

ygthb said:
Just got my carbon fiber look, acer case today, excellent choice. feels good in the hand, will have to see how it holds up over time.
Click to expand...
Click to collapse
Got my carbon Acer case in, much better than the black leather one. The easel stand is MUCH better.
Sent from my A100 using XDA Premium App

kdkinc said:
I purchased this case about a month ago. It was sent from China so it takes at least 3 weeks to arrive .
After a week of break in period the case feels great to the hands. The leather used on the outside of the case acquires a nice soft feel and has NO leather smell like the Acer smelly case.
All ports and buttons are accessible and the A100 hold firmly in the case with no screen visibility restrictions.
The case open steno style as opposed to book style in the portrait screen position.
As a bonus they also include a very nice NON glare screen protector.
$16.95 with free shipping....it's a great deal.
http://www.skindigitalstore.com/categories/Acer-Iconia-Tab-A100/
Product Description
Compatible with: Acer Iconia Tab A100 with 7-inch display tablet (Not for W100, A500, W500)
High quality GENUINE LEATHER (Not synthetic/faux leather) case designed to fit perfectly your Acer Iconia Tab A100 7"
Soft genuine leather outer/inner gives tactile and aesthetic appeal and adds strength and durability to the case
Rigid yet flexible exterior with a soft padded microfiber interior
Contrasting white stitching to add a distinct level of style
Cut outs allow access to all buttons, ports and sensors
The case is designed to fold back, so you can read with just one hand
The front flap can be used as a stand for a comfortable viewing angle
Provides excellent protection from scratches and bumps
Ultra secure magnetic closure
Stylish, compact & lightweight
Easy to install and remove!
Package content:
1 x Black genuine leather case for Acer Iconia Tab A100 (Tablet not included)
1 x Anti-Glare screen protector and cleaning cloth
Click to expand...
Click to collapse
Nice! The more accessories the better...hopefully that's an indication of popularity of the A100.
Sent from my Acer Iconia A100 using XDA Premium for Android

best buy has an Acer A100 case with bonus sony headphones for 30 dollars in store. It was in their ad good until oct 31.
http://www.bestbuy.com/site/Acer+Ta...99167500050000&slref=10&id=pcmprd167300050000

My Acer Carbon Fiber case is backordered, so I decided to try another case instead. But I couldn't decide between them, so I ordered two cases from amazon to try out. Figured since there's not much info on these yet, I might as well be the test subject
These are the 2 cases:
rooCASE Multi-Angle (Black) Leather Folio Case Cover with Stand and Elastic Hand Strap for Acer Iconia Tab A100 7-Inch Android Tablet Wi-Fi
$24.95
I especially like that there's an elastic strap on the back for you to securely hold the tablet one handed in portrait mode for e-reading type activities.
rooCASE Ultra Slim (Black) Leather Case Cover Cover with Stand for Acer Iconia Tab A100 7-Inch Android Tablet Wi-Fi
$27.96

rcummings100 said:
My Acer Carbon Fiber case is backordered, so I decided to try another case instead. But I couldn't decide between them, so I ordered two cases from amazon to try out. Figured since there's not much info on these yet, I might as well be the test subject
These are the 2 cases:
rooCASE Multi-Angle (Black) Leather Folio Case Cover with Stand and Elastic Hand Strap for Acer Iconia Tab A100 7-Inch Android Tablet Wi-Fi
$24.95
I especially like that there's an elastic strap on the back for you to securely hold the tablet one handed in portrait mode for e-reading type activities.
rooCASE Ultra Slim (Black) Leather Case Cover Cover with Stand for Acer Iconia Tab A100 7-Inch Android Tablet Wi-Fi
$27.96
Click to expand...
Click to collapse
should have google it
available to Canadian for $30.21 + $3.93 HST --->>> free shipping too !!
way cheaper then Acer official store !!
here:
http://www.toners.ca/ecuisp/~toners..../product/productDetail.jsp?productId=1008158
and here for $27 .... not sure about shipping....the previous seems better choice as the shipping is FREE !
http://www.directdial.com/LC.ACC0A.036.html
and here for $22:
http://www.comtec.ca/Acer-Tablet-Carbon-Fiber-Folio-Case-For-A100-Series-Tables-Only-LC.ACC0A.036
There are other vendor that carry this same case...they all are way cheaper then Acer official store !! just google !

UnicornKaz said:
should have google it
available to Canadian for $30.21 + $3.93 HST --->>> free shipping too !!
way cheaper then Acer official store !!
here:
http://www.toners.ca/ecuisp/~toners..../product/productDetail.jsp?productId=1008158
and here for $27 .... not sure about shipping....the previous seems better choice as the shipping is FREE !
http://www.directdial.com/LC.ACC0A.036.html
and here for $22:
http://www.comtec.ca/Acer-Tablet-Carbon-Fiber-Folio-Case-For-A100-Series-Tables-Only-LC.ACC0A.036
There are other vendor that carry this same case...they all are way cheaper then Acer official store !! just google !
Click to expand...
Click to collapse
Yes, I know how to google
I found all of those stores weeks ago, literally all of them, plus some others. Contacted each one and was told they had no clue on ETA, and they wouldn't sell to me until they had stock. So through my office at work I had my boss contact the universal Canadian supplier for these cases, Synnex. We sell computer hardware to corporations, so we order from there all the time, just usually in large quantities. In this case my boss made an exception for me and ordered a single unit.
I got a much better price than these stores
But unfortunately it turned out Synnex didn't get as many in as planned and now I'm stuck waiting for that order. I don't want to cancel because I asked a favour of my boss to order it for me...looks bad on me coming back now saying "uh, can you cancel that?"
But if these rooCase cases come and suck, i'll do just that and buy from one of the stores you mentioned. I've got no experience with any of them. Do you?

So did anyone get a RooCase? Thoughts?

Sorry about that. I totally forgot to post my reviews!!
I now have 3 cases believe it or not. The rooCASE Multi-Angle , The rooCASE Ultra Slim, and the Acer Carbon Fiber.
I also have the "Black Carbon Fiber Film Shield & Screen Protector - Armorsuit MilitaryShield". Please see my previous posts in this thread for links and pictures. They're clearly labeled.
Here's some quick thoughts, and I can do proper reviews tomorrow or Monday.
Black Carbon Fiber Film Shield & Screen Protector for Acer Iconia Tab A100 7-Inch Tablet - Armorsuit MilitaryShield
This is a pretty standard sticker type protector that doesn't offer mch protection beyond scrapes and scratches. But it does look great on the tablet. I've had a few carbon fiber cases and similar protectors for other devices, and they all look the same. If you've seen the official Acer Carbon Fiber portfolio case, this has the same pattern.
It was fairly easy to install, with the only challenge being lining up the separate pieces. There's a huge piece for the back, then pieces to cover all 4 sides.
The screen protector is pretty good. It went on very easily, is meant for our device so there's no custom cutting needed on your part. It fits perfectly.
The tablet looks really good in this skin. But I'm not sure what use it really is. On cell phones the idea is you can keep it in your pocket without scratches from keys and change and what not, but we don't exactly do that with these tablets.
The screen protector on the other hand is great.
rooCASE Multi-Angle (Black) Leather Folio Case Cover with Stand and Elastic Hand Strap
This case is really good. Pretty high quality leather and very well made. It fits the tablet perfectly. The inside seems to be some sort of microfibre cloth and feels great. The elastic handstrap is somewhat useful, but more gimicky than anything else. The stand portion works well. You can leave it on a desk and watch a movie like that easily. Or more functionally, you can use a bluetooth keyboard with the tablet standing up quite well. The lid is also magnetic, so it stays shut when you close the case up. It's not a very strong magnet but it does the job quite well.
rooCASE Ultra Slim (Black) Leather Case Cover Cover with Stand
This case is fantastic. It's the same high quality leather as the above case, same inside microfibre. But it really is very thin. Much thinner than either the above case or the official Acer Carbon Fiber one. There's no magnetic latch, no elastic or anything to hold the case shut. But it really doesn't need it - the case stays closed just fine on it's own. When open the cover folds easily around to the back, and you hardly notice it's there while using the tablet. The right side and top/bottom has some 'extra' leather sticking out about 1/3rd of an inch, because that's how they sewed it shut to keep it so slim. It's hardly noticeable after a few minutes and not a negative at all. The cutouts match up perfectly with the buttons and slots, and unlike the Acer one, there is plenty of protection where there isn't something to access under the case.
Official Acer Carbon Fiber case:
I don't remember much about this off the top of my head (I'm writing this review in the middle of the night because I can't sleep) so I'll edit the post and do a more formal review tomorrow. From what I remember:
The case looks beautiful. It has pretty good protection on the front and back, but the protection on the sides is lacking. There are only a few straps holding the case in. Thickness wise, it's thinner than the Roocase multi-angle, but considerably thicker than the roocase ultra-slim.
So after all that, here's what I decided:
I've got the Armorsuit MilitaryShield skin and screen protector on. The screen protector helps provide ease of mind while using the tablet. And I didn't want to take the skin off since I paid good money for it and it doesn't get in the way of the other proper cases. It also adds some protection to the sides that are exposed in the various cases, especially the Acer case.
Case wise...I'm using the rooCASE Ultra-Slim. It simply feels the best in your hand is the lease obtrusive in use, yet provides great protection. I've dropped the tablet a few times, once onto my tile floor by accident, and the tablet was fine. I love how thin it is compared to the other cases.
Again, I'll do a proper review in the next couple of days with some pictures.
Got questions? Ask away

Belt clip/pouch with slim armor case?

I just bought the spigen slim armor case and am having a very difficult time finding a belt pouch that fits.
I measured out the dimensions with the case on and it is 5 3/4" x 3" x 1/2"
i am also thinking about maybe getting a pouch that was made for a different phone that is slightly larger than the nexus 5.
anyone have any luck?
Update: looks like no one responded to me but i'll post this anyway...in case anyone is interested
http://www.amazon.com/Luxmo-Horizontal-Leather-Holster-Carrying/dp/B008FQVO5G/ref=lh_ni_t?ie=UTF8&psc=1&smid=A119K31BOSN2QF
I bought this pouch and it is a perfect fit for the Nexus 5 + slim armor case...the dimensions are 5.9" x 3 x 1 which was the closest ive found so i took and chance and it was a great choice..you can get it for like $5 but i went with the seller that had it for $7 (prime shipping)

Just came across this - do you think it'd have enough room for a bigger case? I have the Ringke Fusion which isn't a very thick case, but it's thicker than the spigen slim.
Also how has it held up? I can be a bit rough on my belt loop cases (keep getting caught on seatbelts and such) and I had one like that rip on me after a couple of weeks.
Thanks in advance

JosephD1014 said:
Just came across this - do you think it'd have enough room for a bigger case? I have the Ringke Fusion which isn't a very thick case, but it's thicker than the spigen slim.
Also how has it held up? I can be a bit rough on my belt loop cases (keep getting caught on seatbelts and such) and I had one like that rip on me after a couple of weeks.
Thanks in advance
Click to expand...
Click to collapse
Is the Ringke Fusion bigger up/down or just thickness? If it's thickness it should be fine.. There is some wiggle room there... But of course I can't guarantee you
You should measure it and compare it to the dimensions I posted above
The belt loops are pretty durable.. There are two loops and a metal clip... Very sturdy
Sent from my Nexus 5

jdiddy_ub said:
Is the Ringke Fusion bigger up/down or just thickness? If it's thickness it should be fine.. There is some wiggle room there... But of course I can't guarantee you
You should measure it and compare it to the dimensions I posted above
The belt loops are pretty durable.. There are two loops and a metal clip... Very sturdy
Sent from my Nexus 5
Click to expand...
Click to collapse
I'm currently using a Seido Dilex holster with my Ringke Fusion and it fits perfectly. I got tired of trying to find a pouch that will fit. As for your case, I would look into the holster for their covert case, you'll just need to know the thickness of the case to see if there's any wiggle room or will it fit snug.
Just my thoughts.

Is there anything like that that will hold the phone vertically and not horizonally? Doesn't have to be a complete pouch, but just some kind of 'cage' that holds the phone+slim armor case on a belt, but vertical.

paradoxiumwind said:
Is there anything like that that will hold the phone vertically and not horizonally? Doesn't have to be a complete pouch, but just some kind of 'cage' that holds the phone+slim armor case on a belt, but vertical.
Click to expand...
Click to collapse
just measure the dimensions that search for a phone case that fits it vertically...horizontal one that i bought is for the S3 and it fits...so you can start by trying to search for S3 vertical pouches

paradoxiumwind said:
Is there anything like that that will hold the phone vertically and not horizonally? Doesn't have to be a complete pouch, but just some kind of 'cage' that holds the phone+slim armor case on a belt, but vertical.
Click to expand...
Click to collapse
Look at these two holsters Seidio. I don't work for them, just love the holsters. They do rotate as well. The Surface holster will fit case that are less than 2mm thick and the Dilex will fit cases that are less than 2.2mm thick (Ringke Fusion needs the Dilex due to the "feet" of the case) I'm assuming the Dilex is need for the slim armour case as well, I can't find the thickness of the case.

[Q] Poetic Slimline vs. Moko Slim case

Hey I am deciding between the Moko Slim case and the Poetic Slimline case.
They're practically the same and price is not so much of an issue but I was wondering about protection from falls, issues with magnets scratching screens, and long-term wear and tear of the products.
Any recommendations?

jweezy56 said:
Hey I am deciding between the Moko Slim case and the Poetic Slimline case.
They're practically the same and price is not so much of an issue but I was wondering about protection from falls, issues with magnets scratching screens, and long-term wear and tear of the products.
Any recommendations?
Click to expand...
Click to collapse
I bought the Moko for my first case and it was alright for the most part. The tab that hooks around the N7 to close the cover is a PITA. I tried bending it out a little and broke it. That prompted me to purchase the Poetic case and I really like it. Simple design and does it's job.
Of the two I would vote for the Poetic.

i bought a generic "made in china" rotating case from ebay. quality is more or less as same as the "branded" ones.
even branded ones dont last long. a friend's i-pad case (veryy expensive one) literally came apart after about 6 months of use. so if you are gonna buy a new one roughly every year, i suggest buy a knock off

I bought the Moko slimline case from Amazon. All in all it seems like a good case. The only small issue I have with it (and I'm sure it's the same with all cases like this). When you fold the front cover over and use it in book mode the front cover has a lot of play up and down while you hold it. It's almost like there is too much material in the spine. If someone has the Poetic and could comment on if his is the same I'd love to know. I've considered returning this one and trying the Poetic.

I have the moko multi angle case as well as the regular(which I have yet to use) and I am very happy. I do agree that the tab that holds the case shut is somewhat a pain but not enough for me to not recommend it. I got it dirt cheap as well(12 bucks I think)
Sent from my AT&T Galaxy S4 Running KangaKit powered by ktoonez's Kernel!

Just received my moko case today. I can't say i would recommend it as it caused my top speaker to stop working.

jweezy56 said:
Hey I am deciding between the Moko Slim case and the Poetic Slimline case.
They're practically the same and price is not so much of an issue but I was wondering about protection from falls, issues with magnets scratching screens, and long-term wear and tear of the products.
Any recommendations?
Click to expand...
Click to collapse
I've owned the poetic slimline case since july, when the nexus 7 2013 came out. Use it nearly on a daily basis and haven't had any issues with it

Had my Poetic for two months and the magnets are falling out and the plastic holding them in is cracking. I would rather pay a little more than have to buy a case two or three times within a year. Cheap crap.

Thanks for all the responses.
I ended up purchasing the Moko slim case.
I didnt want to have any issues with the magnets falling out and I didn't particularly like the logo on the front.
I've had the moko for about a week and I've liked it a lot so far. The case feels pretty premium and soft. The inner is a soft microfiber. The back has a hard plastic outline in addition to the fake leather center. This protects it fairly well as I have dropped it from a medium height (3 feet or less) a couple of times and it is fine. The magnet in the flap works excellently with the auto on-off functionality. I have tried NFC and it works through the case. I've also heard wireless charging works though I have not verified this. Some issues I have with the case:
The inner of the flap is collecting some fuzz
The left side of the case seems to be a little loose
The magnets seem a little weak and slide left and right. It can also open the case if shaken upside down.
Overall an excellent case and I would recommend.

Seidio Cases Now Available for Nexus 5

I began using a Seidio Surface case on my GS3 and I LOVED it. Phone has survived many drops from lap while getting out of my somewhat raised truck, and quite a few from pants pocket level while standing. Never had a cracked screen, even on corner drops. Love the soft grip, thinness of the case, and that it doesn't grab onto pocket fabric when you're trying to get it out.
Ordered my Nexus 5 on day one. Got a cheapo case just out of paranoia because Seidio didn't have the Surface out yet. Hate it. HATE IT. Been checking the Seidio site everyday for the release. Checked last night when I got home from work....and saw that they are now shipping.
Black is the only color currently shipping. I've got my order in. Obviously I haven't received it yet.
There's a 15% off coupon code you can use through 12/06/2013: SURFACE15
I figured there are others out there that want this case, so I thought I'd post.
http://www.seidioonline.com/LG-Google-Nexus-5-s/9164.htm

Pig Vomit said:
I began using a Seidio Surface case on my GS3 and I LOVED it. Phone has survived many drops from lap while getting out of my somewhat raised truck, and quite a few from pants pocket level while standing. Never had a cracked screen, even on corner drops. Love the soft grip, thinness of the case, and that it doesn't grab onto pocket fabric when you're trying to get it out.
Ordered my Nexus 5 on day one. Got a cheapo case just out of paranoia because Seidio didn't have the Surface out yet. Hate it. HATE IT. Been checking the Seidio site everyday for the release. Checked last night when I got home from work....and saw that they are now shipping.
Black is the only color currently shipping. I've got my order in. Obviously I haven't received it yet.
There's a 15% off coupon code you can use through 12/06/2013: SURFACE15
I figured there are others out there that want this case, so I thought I'd post.
http://www.seidioonline.com/LG-Google-Nexus-5-s/9164.htm
Click to expand...
Click to collapse
I am thinking of buying one. This will be my first seidio case. Can you please tell me the difference between surface and dilex versions?

Pig Vomit said:
I began using a Seidio Surface case on my GS3 and I LOVED it. Phone has survived many drops from lap while getting out of my somewhat raised truck, and quite a few from pants pocket level while standing. Never had a cracked screen, even on corner drops. Love the soft grip, thinness of the case, and that it doesn't grab onto pocket fabric when you're trying to get it out.
Ordered my Nexus 5 on day one. Got a cheapo case just out of paranoia because Seidio didn't have the Surface out yet. Hate it. HATE IT. Been checking the Seidio site everyday for the release. Checked last night when I got home from work....and saw that they are now shipping.
Black is the only color currently shipping. I've got my order in. Obviously I haven't received it yet.
There's a 15% off coupon code you can use through 12/06/2013: SURFACE15
I figured there are others out there that want this case, so I thought I'd post.
http://www.seidioonline.com/LG-Google-Nexus-5-s/9164.htm
Click to expand...
Click to collapse
Getting the Dilex, I think used to be called the ACTIVE accessories because they can accommodate more sizes of cases. The SURFACE15 only works for surface items (Duh), but I found a twitter discount code for 10% off anything - TW10. I am only buying the Dilex holster at this point.

psy_spy said:
I am thinking of buying one. This will be my first seidio case. Can you please tell me the difference between surface and dilex versions?
Click to expand...
Click to collapse
All I know about the differences is from the descriptions on their website. I like using the thinnest cases possible...hate bulk. So for me, since the Surface is thinner, that's what I'm going with, since I know the Surface provides adequate protection for all my needs.
Here are the descriptions from Seidio's website:
Our SURFACE™ case is thin and sleek, perfect for those who want to shield their device from everyday wear. Depending on the device's size and dimensions, the case either snaps or slides together. Precision cut-outs allow access to all ports and controls, and the case is finished with our signature soft-touch coating that doesn't attract lint and slides easily in and out of your pocket or purse.
Designed for those with an on-the-go lifestyle, our DILEX™ case provides great shock and impact absorption. With two layers, our DILEX™ case is slightly thicker than our SURFACE™ case. The DILEX™ Skin, the first layer, is a highly durable polymer that covers vital ports and controls. The second layer, which is the DILEX™ Skeleton, fits over the DILEX™ Skin and provides extra protection at impact points such as corners and sides.
https://www.seidioonline.com/Articles.asp?ID=157

Looks like it retains the shape of the device, but adds some thickness like the neo hybrid. Worth considering.

tebower said:
Looks like it retains the shape of the device, but adds some thickness like the neo hybrid. Worth considering.
Click to expand...
Click to collapse
Yes the Dilex or I am used to calling it the ACTIVE cases, which are thicker because there is a top piece, usually plastic that covers a portion of the softer case, thus making it thicker. Great protection and one of the better cases for drop protection IMO. However, I have just been using the Dilex/Active holsters as a belt holster in combination of various tpu cases.

kpjimmy said:
Yes the Dilex or I am used to calling it the ACTIVE cases, which are thicker because there is a top piece, usually plastic that covers a portion of the softer case, thus making it thicker. Great protection and one of the better cases for drop protection IMO. However, I have just been using the Dilex/Active holsters as a belt holster in combination of various tpu cases.
Click to expand...
Click to collapse
How do the Dilex and Surface stand up to lint? i love soft-touch but silicone is a lint trap, and I absolutely HATE the look of lint and the time it takes to get the lint off.

droid_<3er said:
How do the Dilex and Surface stand up to lint? i love soft-touch but silicone is a lint trap, and I absolutely HATE the look of lint and the time it takes to get the lint off.
Click to expand...
Click to collapse
No lint problem whatsoever with the Surface. Can't vouch for the Dilex.

droid_<3er said:
How do the Dilex and Surface stand up to lint? i love soft-touch but silicone is a lint trap, and I absolutely HATE the look of lint and the time it takes to get the lint off.
Click to expand...
Click to collapse
The Dilex/Active uses the same material, they just add pieces for added protection. As for lint, no issue at all. And I have very linty pockets lol.

Did anyone receive the Surface yet? I really want see how it looks before I buy it.
thanks!

Seidio is great. I'll wait till they hit amazon though for better pricing.
Sent from my Nexus 5 using Tapatalk

Love Seidio cases, been using for years.
No lint problem whatsoever with the Active now the Dilex.

I used an Active case for my Galaxy Nexus and it was great.
I wouldn't mind getting another but need to know if the wireless charging will work through the case. They only say NFC works through the cases and nothing and wireless charging.
Time will tell tho when people here start getting their cases in.

I was just going to report this myself and they are now showing at amazon although only the black can be ordered, same as the manufacturer website. I had one of the surface cases on my N1 and my wife had it on the sgs at the same time. On the N1 the case worked well and the phone did survive a few drops undamaged. It worked less well on the sgs. As some of you might recall that phone was flimsy and the two piece nature of the surface combined with that flimsiness was a bad combo. The entire case/phone combo would move around allowing the case to abrade her phone a little bit and it simply felt bad. Exact opposite of the N1 where it felt very good and did not move or abrade the phone in any way. Mine did collect a little lint from some fabrics but nothing like some gel cases I've had. I'm guessing most would be ok with the lint factor and in reviews I've seen few complaints.
I've decided to go ahead and order the dilex version to give it a try and amazon is showing an after xmas delivery timeframe. Right now I have the ne-hybrid which is ok but not exactly confidence inspiring.

krabman said:
I was just going to report this myself and they are now showing at amazon although only the black can be ordered, same as the manufacturer website. I had one of the surface cases on my N1 and my wife had it on the sgs at the same time. On the N1 the case worked well and the phone did survive a few drops undamaged. It worked less well on the sgs. As some of you might recall that phone was flimsy and the two piece nature of the surface combined with that flimsiness was a bad combo. The entire case/phone combo would move around allowing the case to abrade her phone a little bit and it simply felt bad. Exact opposite of the N1 where it felt very good and did not move or abrade the phone in any way. Mine did collect a little lint from some fabrics but nothing like some gel cases I've had. I'm guessing most would be ok with the lint factor and in reviews I've seen few complaints.
I've decided to go ahead and order the dilex version to give it a try and amazon is showing an after xmas delivery timeframe. Right now I have the ne-hybrid which is ok but not exactly confidence inspiring.
Click to expand...
Click to collapse
Do you have a link to the amazon page? I can't find it... thanks!

I'm sorry but I just tried and it appears they have taken the pages down since I put my order in last night.

kpjimmy said:
Getting the Dilex, I think used to be called the ACTIVE accessories because they can accommodate more sizes of cases. The SURFACE15 only works for surface items (Duh), but I found a twitter discount code for 10% off anything - TW10. I am only buying the Dilex holster at this point.
Click to expand...
Click to collapse
I just ordered a Surface Holster. I intend to use it with my TPU cases as this is the same setup I used with my EVO for work and loved it. Surface holster with a cruzerlite case is all i needed!.

Is there going to be an OBEX version for the nexus 5? That's a case I'd feel confident with.
Sent from my Nexus 5 using xda app-developers app

yocubed said:
I just ordered a Surface Holster. I intend to use it with my TPU cases as this is the same setup I used with my EVO for work and loved it. Surface holster with a cruzerlite case is all i needed!.
Click to expand...
Click to collapse
I ordered the S4 active phone surface holster from android central and it fits perfectly with a TPU Case. Got like 25% off of the seidio price.

Anyone get the Dilex case yet and try it with wireless charging?

Spigen Slim Armor Black (SF)

I'm wondering if anyone has the slim armor black and know if it has the same soft feel (SF) coating as the Ultra Fit black case?
I know the ultra fit case has a soft feel coating and grip similar to the nexus 5 itself, which is really nice. They both have the soft feel "SF" for the black version, so I'd be keen to get the slim armor if it's just the same coating.
Thanks.

According to Amazon, because Spigen seems to have pulled most of their Ultra Fit cases from their website except the clear one, they have revised the Smooth Black option "SF (Soft Feel) Coated: Non-Slip Matte surface with an Excellent Grip" The Crystal Shell, Champagne Gold and the Smooth White colors remain the same as before "Soft Matte (SM) Coated: smooth & matte surface" In my experiences with the Smooth White color the fit is too snug, to the point where removing the case left marks on the top right and bottom right of my phone and SM is very slippy so I'm excited to try out this revised case. :good:

Similiar in feel
WangLung said:
According to Amazon, because Spigen seems to have pulled most of their Ultra Fit cases from their website except the clear one, they have revised the Smooth Black option "SF (Soft Feel) Coated: Non-Slip Matte surface with an Excellent Grip" The Crystal Shell, Champagne Gold and the Smooth White colors remain the same as before "Soft Matte (SM) Coated: smooth & matte surface" In my experiences with the Smooth White color the fit is too snug, to the point where removing the case left marks on the top right and bottom right of my phone and SM is very slippy so I'm excited to try out this revised case. :good:
Click to expand...
Click to collapse
I just got my Slim Armor case, the case is awesome. Very similar to the otterbox defender for blackberry bold. The Nexus 5's soft touch finish is very closely emulated by this case. not quite as soft but pretty darn close. slightly slicker than the phone itself but far grippier than most other cases. Fit and finish are excellent, protects the camera really well and even boost sound a little when using speaker phone or listening to music. I highly recommend it. My only question is whether it will work with QI chargers. As soon as I can confirm that I will be order a QI charger for my office and bedroom.

Drewtopia said:
I just got my Slim Armor case, the case is awesome. Very similar to the otterbox defender for blackberry bold. The Nexus 5's soft touch finish is very closely emulated by this case. not quite as soft but pretty darn close. slightly slicker than the phone itself but far grippier than most other cases. Fit and finish are excellent, protects the camera really well and even boost sound a little when using speaker phone or listening to music. I highly recommend it. My only question is whether it will work with QI chargers. As soon as I can confirm that I will be order a QI charger for my office and bedroom.
Click to expand...
Click to collapse
that sounds awesome, I'll have to get one of these thing. yeah, grip is a big problem for me, so I'm looking for a grippier case without going to those silicone ones. thanks!

Drewtopia said:
I just got my Slim Armor case, the case is awesome. Very similar to the otterbox defender for blackberry bold. The Nexus 5's soft touch finish is very closely emulated by this case. not quite as soft but pretty darn close. slightly slicker than the phone itself but far grippier than most other cases. Fit and finish are excellent, protects the camera really well and even boost sound a little when using speaker phone or listening to music. I highly recommend it. My only question is whether it will work with QI chargers. As soon as I can confirm that I will be order a QI charger for my office and bedroom.
Click to expand...
Click to collapse
Yes it works with qi chargers. I have 2 of the nexus 4 chargers and this case works well with them. I would just suggest a flat charger so the phone won't slip off of it.
Sent from my Nexus 5 using Tapatalk

I received mine yesterday. Feels great however the power button is hard to press. Contacted spigen Canada and they will send me a new tpu part! Great customer service. And it charges with my Nokia DT-900
Sent from my Nexus 5 using xda app-developers app

th3xeroeagle said:
I received mine yesterday. Feels great however the power button is hard to press. Contacted spigen Canada and they will send me a new tpu part! Great customer service. And it charges with my Nokia DT-900
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
I find my power button is definitely a little stiffer than the volume controls, but by no means is it hard to press. I figured it was designed this way so people dont accidentally lock their phone all the time or unlock/power off their phone when it is in their pocket.