Develop Bugs

[Q] Galaxy s2 won't boot into download mode for rooting

Hi guy's, I would just like to start off by saying that XDA is a wonderful site full of amazing information. It just so happens that the problem I'm having isn't anywhere on this website which leads me to think if I'm the only one who has this sort of situation. Basically what's going on is that I would like to root my T989, mainly to get rid of carrier bloatware, so I looked around the internet and YouTube videos and learned how to do it, the only problem is that I am failing at the first step of it which is getting it in download mode. I downloaded Odin3 v1.85, then while running Odin I held the volume up+down buttons and at the same time plugged in the USB cable, as soon as I do that the phone boots into a screen that is showing the battery being charged instead of going to the warning screen and Windows says that the device was not recognized and the USB has malfunctioned. I did install the Samsung ADB drivers for the phone, I also turned USB debugging on, and I tried three different computers all with the same results. Oh and if anyone wants to know, I am running Android 2.3.6. Can anyone please help me? I would really appreciate it if you guys could help me find a solution to this.
BTW this is my first thread on XDA

Paragraphs are your friend.
Sent from my SGH-T989 using xda premium

PCLOVER93 said:
Hi guy's, I would just like to start off by saying that XDA is a wonderful site full of amazing information. It just so happens that the problem I'm having isn't anywhere on this website which leads me to think if I'm the only one who has this sort of situation. Basically what's going on is that I would like to root my T989, mainly to get rid of carrier bloatware, so I looked around the internet and YouTube videos and learned how to do it, the only problem is that I am failing at the first step of it which is getting it in download mode. I downloaded Odin3 v1.85, then while running Odin I held the volume up+down buttons and at the same time plugged in the USB cable, as soon as I do that the phone boots into a screen that is showing the battery being charged instead of going to the warning screen and Windows says that the device was not recognized and the USB has malfunctioned. I did install the Samsung ADB drivers for the phone, I also turned USB debugging on, and I tried three different computers all with the same results. Oh and if anyone wants to know, I am running Android 2.3.6. Can anyone please help me? I would really appreciate it if you guys could help me find a solution to this.
BTW this is my first thread on XDA
Click to expand...
Click to collapse
I would remove the battery 1st and let it chill for a sec. Replace the battery, and hold vol - & + and then connect your USB cable. Do this in that exact order and you should have no issues.

Also if your PC isn't recognizing your phone I'd try a different USB cable. Sometimes that works.
Sent from my SGH-T989 using xda premium

I had the same problem with my previous sgs2, i tried everything from uninstalling and reinstalling the drivers, used a different usb cable, tried a different laptop and nothing fixed it, if your computer wont recognize the phone after trying everything you can think of, then do what i did and get a warranty exchange, after that my new sgs2 connected perfectly
Sent from Flip's SGS2

elflip88 said:
I had the same problem with my previous sgs2, i tried everything from uninstalling and reinstalling the drivers, used a different usb cable, tried a different laptop and nothing fixed it, if your computer wont recognize the phone after trying everything you can think of, then do what i did and get a warranty exchange, after that my new sgs2 connected perfectly
Sent from Flip's SGS2
Click to expand...
Click to collapse
remember that **** well lol.
TO OP:
There are a couple things you can still try, but chances are slim since you did try 3 different computers. It might have been possible that the installation of the drivers (when you plug in your phone) was interrupted somehow and it left an incomplete installation. You would need to download usbdeview and remove/delete/uninstall (forgot what term was used) everything android/samsung related.
Plug in your phone when it's on in the homescreen or something.. let it sit for like 5-10 mins for it to install everything.. there is like 5 things or so. Now try to go into download mode.
If that doesn't work, make sure you're using the t989 drivers.
if that doesn't work, then install kies
Try to mix and match USB wires and USB ports on the computer.

Teo032 said:
remember that **** well lol.
TO OP:
There are a couple things you can still try, but chances are slim since you did try 3 different computers. It might have been possible that the installation of the drivers (when you plug in your phone) was interrupted somehow and it left an incomplete installation. You would need to download usbdeview and remove/delete/uninstall (forgot what term was used) everything android/samsung related.
Plug in your phone when it's on in the homescreen or something.. let it sit for like 5-10 mins for it to install everything.. there is like 5 things or so. Now try to go into download mode.
If that doesn't work, make sure you're using the t989 drivers.
if that doesn't work, then install kies
Try to mix and match USB wires and USB ports on the computer.
Click to expand...
Click to collapse
Yeah I did all this, so op if you do all these also and it still doesn't work then to the warranty exchange
Sent from Flip's SGS2

what carrier do you use? there is a different way between tmobile and telus
Sent from my SGH-T989D using XDA

[Q] HELP - AOKP B30 Can't mount device to computer.

Hey guys!
Last night i installed B30 of AOKP to my phone via CWM and now my phone will not mount to my computer. I cannot install a different rom as i cannot place it on my intSD. Has anyone suffered this problem and/or has a solution?
Thanks for your time,
Steve

Are you using fast USB charge?
Sent from my francoPhone

I'm not no. Or i haven't enabled it. Where would i find it?
Thanks for the quick reply btw.
No it's not

What kind of computer? Windows,its a driver thing, if its Mac u need android file transfer which is a nifty application u can find for free.
Edit: Try a different USB slot btw
Sent from my francoPhone

Settings>storage>menu dots>mtp
Sent from my Galaxy Nexus using Tapatalk

I have the same issue. MTP is selected, but I don't get any signal from windows that a USB device is connected. It's like plugging it in the usb wall charger, all it does is charge it. If it is the fast charge usb, how do you disable it?
---------- Post added at 01:46 AM ---------- Previous post was at 01:28 AM ----------
Ok, the Galaxy S II looks to have the same issue.
http://forum.xda-developers.com/showthread.php?t=1555266

mnirocky said:
Hey guys!
Last night i installed B30 of AOKP to my phone via CWM and now my phone will not mount to my computer. I cannot install a different rom as i cannot place it on my intSD. Has anyone suffered this problem and/or has a solution?
Thanks for your time,
Steve
Click to expand...
Click to collapse
I noticed this problem when I had fast charge enabled on this rom.. I rectified the issue by disabling the fast charge present in AOKP B30..
Navigate to Rom control and click performance tweaks. You should see a checkbox to disable fast charge there.
Restart your phone after disabling it for the changes to take effect..
After disabling and rebooting your phone, the usb should mount to your computer properly..

darll said:
I noticed this problem when I had fast charge enabled on this rom.. I rectified the issue by disabling the fast charge present in AOKP B30..
Navigate to Rom control and click performance tweaks. You should see a checkbox to disable fast charge there.
Restart your phone after disabling it for the changes to take effect..
After disabling and rebooting your phone, the usb should mount to your computer properly..
Click to expand...
Click to collapse
Well the mtp fixed it. Guess I should have looked into that first. My bad, thanks for the help guys! Now if only I did not keep getting "System UI has stopped" at random times on aokp...

I've tried changing it from MTP to PTP and turning after switching between the two. I've tried two different roms, one based on 4.0.4 and 4.0.3. I've Tried several different USB cables, including the ones that came with my G2x and Nexus One. I've tried it in a USB 3.0 Port. I've tried using different kernals. Even when I get into recovery, windows still doesn't read somthing is attached. I've been transfering ROMS to it via dropbox. I don't think it's a rom issue as it should still show up in windows when in recovery. Also on those roms I made sure that they didn't have "USB Fast Charge" enabled, as I heard that can cause the issue I'm experience. Thinking it was an issue with CWM, I downgraded it, but still no USB. I'm stuck here. Any help is greatly appreciated.

Their IS a fix for this, but we need the code to get into the PhoneUtil menu and turn USB back on.
It's an issue with Samsung phones apparently, and here's a fix someone found a while ago.
http://blog.vacs.fr/index.php?post/...ot-detected-problem-on-Android-Samsung-phones
We just need the PhoneUtil code for the Galaxy Nexus and we should be all set.

It's a HARDWARE ISSUE with the latest batch of GNexs.
My issue is definitely hardware. I sent my GNex back and they sent me back a new one which I received yesterday. I checked and this one wasn't previously rooted or Unlocked. It worked for a day (worked as in windows saw it and I could xfer music/books/comics to it) after I get home from work Windows stopped recognizing it. I did NOTHING to the phone, it just stopped being seen by windows. I only used the cable that came with it and charged it the night before using the supplied adapter, but the USB still stopped working. Last resort I did a system restore to the phone and the USB still doesn't show up in anything ,Tried 5 of my Windows PC's A bunch of PC's at work, my friends Mac, my Ubuntu powered Netbook, my Xbox360 and PS3, even the Transformer Prime using the keyboard dock. This is telling me it's a hardware issue with the Device. Might be somthing wrong with the latest batch of GNex's but the USB seems to give out. Even if I put the phone in ODIN mode NOTHING recognizes it. So, before you all waste your time finding a fix, this is 100% absolutly a hardware issue with these phones, I don't know why, but I had Two bad ones in a row, and am Hoping my 3rd isn't borked too.
I have a bad history with Android phones....My first Nexus One wouldn't stay on, so I got a replacement from HTC. My first two G2x's would constantly reboot, It wasn't until the 3rd one that I got a working one. Now I'm hoping I don't have to go through 4 bad Galaxy Nexus' before getting one that actually works!
I have the opposite luck with tablets....the Novo7, Iconia A100 and Transformer Prime have been perfect outa box. This ordeal with android phones makes me seriously consider exchanging the GNex for an iPhone4s....but the iPhone4s screen is SOOOOO tiny!!!

USB connectivity issues

So I have been on CM9 for a good amount of time. Its finally starting to act up. I am having issues with LOS and other minor annoyances. But the main thing that started happening the other day is it woulnt connect to my computer to move files over or odin to a safe rom to flash something new. Its not my cord cuz its charging, and I plugged another phone in and got a connection. And tried a few different cords. The phone is in newer condition. so i wouldnt thin that the connection is bad. And I have checked all the settings to make sure its not something silly like that. Re installed the drivers on my computer. tried a few different apps to move files. Tried reflashing the same rom. nothing seems to be working. I got it connected for about 2 seconds the other day. then my computer said "device not recognized". So im starting to think this is something to do with my computer. any advice?

what cm9 version?

calisro said:
what cm9 version?
Click to expand...
Click to collapse
Alpha 6

[Q] Galaxy Nexus USB Malfunction

Hi all. Long time lurker, first time poster here.
I have had my Galaxy Nexus for around a year now and have never had any problems - I've flashed countless ROMs and kernels, etc. However, just recently my phone has stopped being recognized by my computer(s). I've searched and searched and read every thread remotely related to the problem and still the problem persists.
At first I thought it was the new Macbook I was using, or OSX, but I've tried everything I can think of in Windows, OSX, and Linux.
When plugged in, I get nothing in OSX - finder won't find it, android file transfer won't find it, adb won't find it. In Windows, I get an unknown device in device manager, and a popup on the toolbar saying the device has malfunctioned. I've tried all three driver installs with Wug's toolkit, switching from MTP to PTP, turning Debugging on and off, flashing new roms and kernels, installing drivers manually, installing drivers through the Android SDK, even different computers - but every time I get "The USB Device has malfunctioned," or nothing at all in OSX's case. I've even tried a laptop running Ubuntu - still a no go. All the while the phone shows it is charging fine, but no indication of being connected to a PC like it used to do.
I've even tried bending the USB port a little as I've read in some guides and cleaning out the port - no luck. I have yet to try a different cable - one is on the way - but my next step is to replace the USB port board myself, unless anyone has ANY ideas.
It charges fine and never has any problems, it's just I cannot get it to be recognized by anything I plug it into.
I don't have an option to enable/disable fast charge in this ROM (currently on CM10) but I have disabled it in one of the ROMs I flashed to and still no luck.
Is there anything I've yet to try, besides using a different cable? Maybe fast charge was enabled in another kernel and it's screwed up some stuff? Although that seems impossible because I've factory reset/wiped everything and flashed different ROMs and kernels and still nothing. I just don't know at this point.
Any input at all would be great, but I understand if there's nothing else I can do besides trying a new cable and then replacing the board. I finally get going in Android development and this brick wall stops me in my tracks.
Thanks guys.

Try to clean the port (by blowing all the dust out of the usb-port)
For now, just use 'Wifi-explorer'. I use it ALOT just to save my USB-port

The two options you came up with yourself sounds most plausible. I've been through a ton of MiniUSB cables that have gone bad out of nowhere (just lying in my briefcase). So test that one first before buying a new USB port.

Well what do you know, it was the USB cable. I cannot fathom how a USB cable just stops working on the data side of things but still charges after just sitting around. I found another cable in a drawer, plugged it in, and voila, everything's working. Glad I don't have to replace anything, though. Woo!
Good thing is though I now know my way around the drivers and the SDK and am pretty sure I could write a guide on everything you could do to fix a USB issue. The more you know!
tuk1maar said:
Try to clean the port (by blowing all the dust out of the usb-port)
For now, just use 'Wifi-explorer'. I use it ALOT just to save my USB-port
Click to expand...
Click to collapse
I had been using AirDroid before and loved it. And even though it was a cable problem, I know know my USB port is squeaky clean, ha.

One X Causes Mac to Freeze

I am having multiple issues. The big one is that sometimes when I plug in the phone to my Macbook Pro, it decides to hang the OS. But it's really weird. It's like only the mouse and keyboard hang. Music will keep playing normally, the clock in the menubar runs with no problems, and if I press the power button the "What do you want to do?" window still pops up, I just can't tell it anything. It forces me to hold down the power button for a hard restart. Here's the weird part: I can't narrow it down to what is causing it. I can't tell if it is the phone in Disk Mode or what. And it doesn't always do it. Heck, sometimes the phone won't even act like it's plugged into a computer so it won't even try to connect.
When I first got the phone it didn't do this, but a few weeks after installing DoubleTwist (the only thing I have installed for this phone) it started happening. Uninstalled DoubleTwist and it still does it.
Any help is super appreciated. I searched around and there are similar problems on other phones, but nothing as odd as this.
Thanks!
HTC One X 2.20 unrooted
Macbook Pro running Lion 10.7.5

this happens to me on my macbook air when I plug in any kind of usb device. it starts working fine after a few seconds though. It doesnt bug me enough that i feel the need to find a solution right now but test if it happens with other usb devices.

shahravi94 said:
this happens to me on my macbook air when I plug in any kind of usb device. it starts working fine after a few seconds though. It doesnt bug me enough that i feel the need to find a solution right now but test if it happens with other usb devices.
Click to expand...
Click to collapse
I have had no other problems with any other devices. And for me, this doesn't go away if I wait for 30 seconds or so. I did find out a few minutes ago that if I unplug my phone, within 30 seconds my mouse begins to work again, but my keyboard still won't work. It seems as though if I press a few keys on my keyboard sometimes the mouse will lock up for another 30 seconds. Only a restart will make it all work normally.

gotcha. well in that case sorry I don't know

Ha it's cool. Hopefully somebody will know though!

have you written to apple to make sure it's ok to plug in an android phone to a mac?
are you on ICS or JB? if it's the later it could be the MTP connection that's been introduced

you have to let your mac and hox know that the lawsuit is over...

waz000000 said:
have you written to apple to make sure it's ok to plug in an android phone to a mac?
are you on ICS or JB? if it's the later it could be the MTP connection that's been introduced
Click to expand...
Click to collapse
Hahahahaha, for some reason I don't know if that was ever an issue lol
I'm running 4.0.4 which from what I understand is still ICS. So it's probably good that I haven't attempted to upgrade just yet?
The main reason I even care right now is because I'm trying to jailbreak, but I'm having all sorts of issues. I figured I'd start with this one haha.

hahaah

I bet if you had an iPhone ,you wouldn't run into this kind of problem ,htc
Sent from my HTC One X using xda premium

I have no issues with my mac...running OS10.8.2...i plugged my HOX, transferred data and even flashed boot.img via mac...no issues whatsoever..seems like you may have to do a SMB reset..try googling ur issue, probably there's a solution somewhere..

atrako1973 said:
I bet if you had an iPhone ,you wouldn't run into this kind of problem ,htc
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
When I plug in my iPhone I don't have this kind of problem
However, my iPhone also can't record audio anymore, and it's two years old. My HOX can and isn't :highfive:
amirage said:
I have no issues with my mac...running OS10.8.2...i plugged my HOX, transferred data and even flashed boot.img via mac...no issues whatsoever..seems like you may have to do a SMB reset..try googling ur issue, probably there's a solution somewhere..
Click to expand...
Click to collapse
I'll look up an SMB reset. Haven't heard of it. Still new to Android lol
However, I googled for a while and even went nuts on here looking for it, no one has this exact issue. The other similar issues only involve programs freezing. For me it seems like my keyboard and mouse freezing, while the computer keeps going. Sometimes I can't even get the two to talk to each other. And when I CAN get my HOX to connect without freezing up the keyboard and mouse, when I run the root through terminal it can't find the phone, in charging mode or in disk mode.

Your Mac is jealous
Sent from my HTC One X using xda app-developers app

So, did an SMC reset (when I googled SMB reset, SMC came up instead). I thought it worked, but it didn't. My mouse would unfreeze, but my keyboard would still be jacked until I restarted. And if I pressed too many keys on the keyboard the mouse would freeze back up for another 30 seconds. I am too tired to think of what I could do right now haha. Throw suggestions (LOGICAL ONES!) and I'll try it out haha. I just want this dang thing to work so I can root! :silly:

This is clearly a Mac issue. Absolutely nothing to do with the hox whatsoever.

You said that you used to be able to plug the phone in without any issues, and the only reason you want to plug the phone in now is to root it (You said Jailbreak but I presume you meant root).
Why don't you try a factory reset on the HOX and see if it resolves the issue. If it does then you can root your phone and will be installing a new ROM anyway so it won't matter that you've done the factory reset. If it doesn't then it means something has changed on you MAC and I can't help you unless you install Windows

Have you tried another usb charge cable with your phone and macbook it could be the cable is damaged internally causing a short circuit and making the usb devices play up even internal like keyboard/trackpad? Just a guess as Ive experienced a broken cable disabling usb which then works fine after reboot.

jo3yp said:
You said that you used to be able to plug the phone in without any issues, and the only reason you want to plug the phone in now is to root it (You said Jailbreak but I presume you meant root).
Why don't you try a factory reset on the HOX and see if it resolves the issue. If it does then you can root your phone and will be installing a new ROM anyway so it won't matter that you've done the factory reset. If it doesn't then it means something has changed on you MAC and I can't help you unless you install Windows
Click to expand...
Click to collapse
factory reset of HOX won't solve an issue with computer. It seems that you USB port is screwing up or is screwed up. See if you can connect another android device the computer and repeat the issue again...if so your USB port is jacked...BTW, u are not using an external keyboard/ mouse, are u?
I'd take the computer back to the service centre and shown them the issue...

me too...seems like MTP is not going well on mac(

jo3yp said:
You said that you used to be able to plug the phone in without any issues, and the only reason you want to plug the phone in now is to root it (You said Jailbreak but I presume you meant root).
Why don't you try a factory reset on the HOX and see if it resolves the issue. If it does then you can root your phone and will be installing a new ROM anyway so it won't matter that you've done the factory reset. If it doesn't then it means something has changed on you MAC and I can't help you unless you install Windows
Click to expand...
Click to collapse
I did mean root haha my bad. If a different USB cable doesn't work then I'll try resetting the phone
gffmac said:
Have you tried another usb charge cable with your phone and macbook it could be the cable is damaged internally causing a short circuit and making the usb devices play up even internal like keyboard/trackpad? Just a guess as Ive experienced a broken cable disabling usb which then works fine after reboot.
Click to expand...
Click to collapse
^^^^ Now THIS I haven't really thought of! And, actually I think it makes more sense than a software issue. I was having problems sometimes even getting the two to talk to each other unless I moved the cord a bit. I've dropped the phone from my nightstand a few times and it has landed on the cord, so I wouldn't be too surprised if either the cord is messed up or (God forbid) the port inside of the phone is messed up. Sometimes if I had the HOX in disk mode and moved the cord just a bit then it would suddenly eject and often freeze. I have another cable back home, so I'll grab it when I'm there tonight or tomorrow and see if I have the same issue!