Develop Bugs

[SOLVED]Computer see's device for a few seconds, then disconnects.

Interesting problem I have had on and off. When I plug my phone into my desktop, it will connect normally, then a few seconds later it acts like I unplugged it. It's not the rom as it does it in recovery as well(both with usb-ms activated and without). I have HTC Sync installed. Rebooting either the computer and/or phone doesn't fix it, it just goes away after awhile and starts working again. I've experienced the problem FAR less when connecting it to my laptop, it will typically work there and not on my desktop when the problem crops up.
it's like this problem but it's not constantly http://forum.xda-developers.com/showthread.php?t=711616
-Edit- the device also doesn't show it's charging even when it 'disconnects'

I have the same problem. just keeps discontenting over and over it sees it for a few seconds then disconnects reconnects then off again.

sasigns said:
I have the same problem. just keeps discontenting over and over it sees it for a few seconds then disconnects reconnects then off again.
Click to expand...
Click to collapse
Mine doesn't reconnect, it 'disconnects' and stays that way(as if i unplugged it) until i actually do unplug it and reconnect it.
-edit- 1,000th post, YAY

I was having the same problem on my MacBook until I realized the MacBook must be plugged into power. Once plugged in everything was good. I wonder if the Evo demands more power through USB then other devices.

Yeah, sounds like a power issue to me. If you're using a USB port on a hub or on a keyboard, try one on the PC itself. Also, it could be a slow USB port or a bad cable if you are continuing to have issues. Try another computer if you can, and if you still have the problem try a different cable. Still have the issue, reflash (if you're running a custom rom) or contact Sprint for service.

Same issue here, but on a desktop PC (Dell Studio XPS) using the front-mounted USB port (not a hub). Keeps disconnecting/reconnecting, but often takes 10-15 minutes between cycles. Using stock ROM (for now, at least). Will try other ports & another PC and will report back.

Already tried different ports, only motherboard ports
Rom doesn't matter as the problem exists in both android and recovery
Don't have a different cable, however the same cable will work fine on my laptop then not work on my desktop

mrono said:
Already tried different ports, only motherboard ports
Rom doesn't matter as the problem exists in both android and recovery
Don't have a different cable, however the same cable will work fine on my laptop then not work on my desktop
Click to expand...
Click to collapse
If it works on a laptop, but not the desktop, then it appears to be an issue with your desktop. Any other USB devices doing it?
I would check your motherboards manufacturer and make sure you've got the right USB drivers, a bios update might be in order as well.
But before all that, I've got an idea. First and foremost, try this:
Go to device manage (either from control panel, right-clicking my computer and going to properties, or searching for devmgmt.msc in the start menu search.)
Navigate down to Universal Serial Bus controllers, double click on USB Root Hub (you probably have 1 for every USB Port, so you may have to do them all.)
Click on the Power Management tab, and uncheck the "Allow the computer to turn off this device to save power." check box and see if that solves your problem.

i had this issue on my hero. it was corrected for me after i did a wipe of data and cache. i restored from titanium afterwards. YMMV
good luck

one thing you might try is disabling sense and using the android launcher. then reset the phone. once it boots up try and connect it to your pc. This was how I got mine to connect. when I was using the sense launcher it somehow blocked that options screen and the default I selected wouldn't stick. once I got the connection to my pc working this way I was able to re-enable sense and it's worked perfectly ever since.
I do not take credit for this fix, someone else on here told me to try this n it worked perfectly.

tarheelsmj12001 said:
one thing you might try is disabling sense and using the android launcher. then reset the phone. once it boots up try and connect it to your pc. This was how I got mine to connect. when I was using the sense launcher it somehow blocked that options screen and the default I selected wouldn't stick. once I got the connection to my pc working this way I was able to re-enable sense and it's worked perfectly ever since.
I do not take credit for this fix, someone else on here told me to try this n it worked perfectly.
Click to expand...
Click to collapse
it was nothing with the rom, since it was doing the same thing in recovery.
it turned out to be the short little usb extender cable that was going a foot and ahalf from behind my pc to the side so i could plug it in easier.

Sirchuk said:
...Navigate down to Universal Serial Bus controllers, double click on USB Root Hub (you probably have 1 for every USB Port, so you may have to do them all.)
Click on the Power Management tab, and uncheck the "Allow the computer to turn off this device to save power." check box and see if that solves your problem.
Click to expand...
Click to collapse
I can confirm this works on my HTC Desire - had been racking up my brains for the past couple of days now with no solution! Thanks a lot. This is on PC with Win7 Ultimate.

[Q] Galaxy s2 won't boot into download mode for rooting

Hi guy's, I would just like to start off by saying that XDA is a wonderful site full of amazing information. It just so happens that the problem I'm having isn't anywhere on this website which leads me to think if I'm the only one who has this sort of situation. Basically what's going on is that I would like to root my T989, mainly to get rid of carrier bloatware, so I looked around the internet and YouTube videos and learned how to do it, the only problem is that I am failing at the first step of it which is getting it in download mode. I downloaded Odin3 v1.85, then while running Odin I held the volume up+down buttons and at the same time plugged in the USB cable, as soon as I do that the phone boots into a screen that is showing the battery being charged instead of going to the warning screen and Windows says that the device was not recognized and the USB has malfunctioned. I did install the Samsung ADB drivers for the phone, I also turned USB debugging on, and I tried three different computers all with the same results. Oh and if anyone wants to know, I am running Android 2.3.6. Can anyone please help me? I would really appreciate it if you guys could help me find a solution to this.
BTW this is my first thread on XDA

Paragraphs are your friend.
Sent from my SGH-T989 using xda premium

PCLOVER93 said:
Hi guy's, I would just like to start off by saying that XDA is a wonderful site full of amazing information. It just so happens that the problem I'm having isn't anywhere on this website which leads me to think if I'm the only one who has this sort of situation. Basically what's going on is that I would like to root my T989, mainly to get rid of carrier bloatware, so I looked around the internet and YouTube videos and learned how to do it, the only problem is that I am failing at the first step of it which is getting it in download mode. I downloaded Odin3 v1.85, then while running Odin I held the volume up+down buttons and at the same time plugged in the USB cable, as soon as I do that the phone boots into a screen that is showing the battery being charged instead of going to the warning screen and Windows says that the device was not recognized and the USB has malfunctioned. I did install the Samsung ADB drivers for the phone, I also turned USB debugging on, and I tried three different computers all with the same results. Oh and if anyone wants to know, I am running Android 2.3.6. Can anyone please help me? I would really appreciate it if you guys could help me find a solution to this.
BTW this is my first thread on XDA
Click to expand...
Click to collapse
I would remove the battery 1st and let it chill for a sec. Replace the battery, and hold vol - & + and then connect your USB cable. Do this in that exact order and you should have no issues.

Also if your PC isn't recognizing your phone I'd try a different USB cable. Sometimes that works.
Sent from my SGH-T989 using xda premium

I had the same problem with my previous sgs2, i tried everything from uninstalling and reinstalling the drivers, used a different usb cable, tried a different laptop and nothing fixed it, if your computer wont recognize the phone after trying everything you can think of, then do what i did and get a warranty exchange, after that my new sgs2 connected perfectly
Sent from Flip's SGS2

elflip88 said:
I had the same problem with my previous sgs2, i tried everything from uninstalling and reinstalling the drivers, used a different usb cable, tried a different laptop and nothing fixed it, if your computer wont recognize the phone after trying everything you can think of, then do what i did and get a warranty exchange, after that my new sgs2 connected perfectly
Sent from Flip's SGS2
Click to expand...
Click to collapse
remember that **** well lol.
TO OP:
There are a couple things you can still try, but chances are slim since you did try 3 different computers. It might have been possible that the installation of the drivers (when you plug in your phone) was interrupted somehow and it left an incomplete installation. You would need to download usbdeview and remove/delete/uninstall (forgot what term was used) everything android/samsung related.
Plug in your phone when it's on in the homescreen or something.. let it sit for like 5-10 mins for it to install everything.. there is like 5 things or so. Now try to go into download mode.
If that doesn't work, make sure you're using the t989 drivers.
if that doesn't work, then install kies
Try to mix and match USB wires and USB ports on the computer.

Teo032 said:
remember that **** well lol.
TO OP:
There are a couple things you can still try, but chances are slim since you did try 3 different computers. It might have been possible that the installation of the drivers (when you plug in your phone) was interrupted somehow and it left an incomplete installation. You would need to download usbdeview and remove/delete/uninstall (forgot what term was used) everything android/samsung related.
Plug in your phone when it's on in the homescreen or something.. let it sit for like 5-10 mins for it to install everything.. there is like 5 things or so. Now try to go into download mode.
If that doesn't work, make sure you're using the t989 drivers.
if that doesn't work, then install kies
Try to mix and match USB wires and USB ports on the computer.
Click to expand...
Click to collapse
Yeah I did all this, so op if you do all these also and it still doesn't work then to the warranty exchange
Sent from Flip's SGS2

what carrier do you use? there is a different way between tmobile and telus
Sent from my SGH-T989D using XDA

USB not detected. Urgent Help.

Okay before yall rage at me, I already search XDA+Google. I think I found some answers to it, but there seems to be some confusion about my problem...So I wanna ask you guys DHD/I4G users.
My problem is that when I connect my phone to the computer, my phone doesnt detect USB anymore. this happened way back before, but somehow it worked again.
I have 3 new different USB Data Cables. I tried all three of them to see if it was my MAIN USB Cable Data that was broken. It wasnt.
I tried connecting it to 2 other computers in my house and still no luck.
So when I was searching, people said that this problem can be from...
-hardware problem(broken) (but i dont think its broken cause my phone is still able to charge.)
-rom with bad download.
And there were some suggestions to what I should do...
-super wipe your phone and re-install a new rom
-take the micro sd put it in your computer format the SD card.
-take battery out for 30 seconds then put it back in.
-return to stock
-reinstall HTC drivers
however all those methods did not work at all.
The thing is my phone still charges on whatever USB or Computer I plug it into.
Also, this problem happened to me awhile back but somehow it was fixed..IDK how I did it.
Also sometimes, my computer detects it, but it says "something has malfunctioned).
my phone has never got in contact with any form of liquid. but what i think has touched my phone is heat or sweat from my pants.
Edit: also, I never dropped my phone before.
Is this a hardware problem? because as I said it before this happened to be awhile back but I was able to get USB detected to my computer again.
Can anyone give me more methods/information on how or what I should do to fix it?
Phone details
- Device: Inspire 4g
- Rom: Aospx BR7
- default Ril from the rom
- radio : in my signature
- phone about 1 and half years old

It seems you have already ruled out software and cable/computer issues. It is possible for a device to have intermittent failure. Sounds like a bad sd reader. Charger runs seperate from that.

Could also be the PC hardware. What PC OS are you using?
Sent from the Bat Cave

zelendel said:
Could also be the PC hardware. What PC OS are you using?
Sent from the Bat Cave
Click to expand...
Click to collapse
I tried on three different computer which all are Windows 7 32 and 64 bits.
EDIT: somehow when I plugged it in my computer, it detected for few seconds then turned off.

Have you tried cleaning your phones port?

marsdta said:
Have you tried cleaning your phones port?
Click to expand...
Click to collapse
ummmm all I did was just blow on it(sounds wrong, LOL).
oh yeah and also, i always hear that sound when you connect any USB into the computer. that beeping noise. but only when I reboot my phone.
I could always transfer files by using the Micro SD Adapter, but thats too much work. taking my phone case out, taking out the bottom part, taking out usb, putting it in the adapater, then in the computer....-_-

update.
I kind of found a solution?? if i can take any step further...
So I changed my rom to a sense 4 rom(virtuous). I disabled Fast Boot from there. Now my computer detects my phone but it gives me the notification saying that my device cant be recognized.

U can use software data cable app its free .. and u can nove data between phone n pc wirelessly as long as you are in the same network ...
Sent from my Desire HD using xda app-developers app

[Q] HTC One X Dead

My HTC One X can no longer be charged(no green or red light), or detected by pc. Before this happened a few days back, I had problem with the display, but then it was ok all by it self and later it just shut off and does not turn on or charge.
Any solution or advise I should try?

Try all button combinations, plug it in the wallcharger over night, leave it on the usb plugged in the pc. If nothing works like that and it doesn't power up there is nothing you can do, maybe changing the battery helps and if that doesn't work it's a hardware issue and you need a repairshop/htc to fix it.

Mr Hofs said:
Try all button combinations, plug it in the wallcharger over night, leave it on the usb plugged in the pc. If nothing works like that and it doesn't power up there is nothing you can do, maybe changing the battery helps and if that doesn't work it's a hardware issue and you need a repairshop/htc to fix it.
Click to expand...
Click to collapse
Thanks a lots. Though I tried it earlier without success, it miraculously worked today. Now all I need is to fix the display. By the way is there any way or app to run an android phone on pc. Like virtually running the HTC from my pc in case the display is gone?

xeroanonymous93 said:
Thanks a lots. Though I tried it earlier without success, it miraculously worked today. Now all I need is to fix the display. By the way is there any way or app to run an android phone on pc. Like virtually running the HTC from my pc in case the display is gone?
Click to expand...
Click to collapse
Well, there is Android Screencast, which runs over ADB, its very sluggish though, around 2FPS.
Sent from my One X using Tapatalk

Device can no longer see computers, need some help figuring things out.

Ok, first off I chose Sprint because I believe that Boost Mobile is on the sprint network, but my phone doesn't specifically say sprint on it or anything, so I had no clue which of these device boards to post into. This is the exact page I got it on, if that helps. [link deleted - paranoid forum rules] - I will post specs of the device in a minute.
Alright, the issue with my phone, is that after I used a car charger 2 months after I got my phone, it suddenly stopped being able to connect to ANY computer ever again. I suspected it was PDA net at first cause that was the newest change I had done to my phone. So, a few days later, I could find now way whatsoever to fix it, and had to factory reset. This fixed my phone just fine.
Two months later, I was fed up with having battery issues all the time, this phone drains battery faster than my laptop, and its battery is 3.8 years old! I got an external battery that holds 20,000 mAh/74 Wh (Practically the same as my laptop battery too. ) that is from the LimeFuel company. I know that before I used it, my phone worked with my laptop just fine. I don't plug my phone in to my laptop all that often, especially now that I have a battery to use with it. However, I download large files on my phone with 4G to put onto my laptop because my home net is crappy, so a week after, I noticed that my phone lost the ability to communicate with computers, again. I then realized, it had to be the connections. The first time it happened was when I used a car charger, the second time, an external battery. Each time, my phone suddenly inexplicably lost the ability to communicate with a computer ever again. It can only see devices as a power source, nothing more. There's no missing software or drivers, it just doesn't register as anything to my computer. Like a power toggle so it can't tell the computer "Hey, I'm a device that you can transfer data with".
One more note; The first time this happened, I had activated developer options but had them turned off. I mean that I used USB Debugging mode once and turned all of that off. The second time, I hadn't even unhid the option yet, unhid after my phone broke again to try and fix but nope.
I did research on trying to fix it, without factory reset because a factory reset is USELESS, if it's going to happen every single time I use anything but the wall to charge it, right?
There was a topic online claiming that there is a menu under "Storage" in the settings. There isn't. It was a big fat lie. Or Android devs deleted it.
There was another topic, claiming that USB settings would be under some wireless and networks area. Nope.
Now, I remember that when my device would connect to the computer, it would let me change it from MTP to PTP, but after this happened, nothing. It doesn't even pop up anymore, nor does it ask. There is no where in the phone that these options even exist at all. It's like Android devs deleted access to these options for no reason whatsoever.
Another bit in that topic mentioned ‘USB Mass Storage’, which also doesn't exist. Here's the topic with everything I tried, if I'm allowed to give links at all. If not, well not my fault. Topics used to try and diagnose and fix issues, but failed;
[link deleted - paranoid forum rules]
[link deleted - paranoid forum rules]
(There were more but I can't remember them all, it's more or less the same as the two above)
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Translation: "To prevent spam, we want to hinder only legitimate users by making them post 10 units of spam first before they can get help with their issues by showing exact information and screenshots of their issues or steps taken given by other websites."
So. How do I get my phone to connect to computers again?
Why does it stop accepting data from computers after I use a car charger or an external battery pack?
Why would Google/Android devs choose to intentionally break your phone like this?
Code:
Hardware: L710T.03
Software: L710TVPU0AOA3
Model: SPH-LT10T
Android 4.4.2
Kernal: 3.4.0-1683363 (Ask if need more)
Build: KOT49H.L710TVPU0AOA3
Ask of need more.

VasVadum said:
Ok, first off I chose Sprint because I believe that Boost Mobile is on the sprint network, but my phone doesn't specifically say sprint on it or anything, so I had no clue which of these device boards to post into. This is the exact page I got it on, if that helps. [link deleted - paranoid forum rules] - I will post specs of the device in a minute.
Alright, the issue with my phone, is that after I used a car charger 2 months after I got my phone, it suddenly stopped being able to connect to ANY computer ever again. I suspected it was PDA net at first cause that was the newest change I had done to my phone. So, a few days later, I could find now way whatsoever to fix it, and had to factory reset. This fixed my phone just fine.
Two months later, I was fed up with having battery issues all the time, this phone drains battery faster than my laptop, and its battery is 3.8 years old! I got an external battery that holds 20,000 mAh/74 Wh (Practically the same as my laptop battery too. ) that is from the LimeFuel company. I know that before I used it, my phone worked with my laptop just fine. I don't plug my phone in to my laptop all that often, especially now that I have a battery to use with it. However, I download large files on my phone with 4G to put onto my laptop because my home net is crappy, so a week after, I noticed that my phone lost the ability to communicate with computers, again. I then realized, it had to be the connections. The first time it happened was when I used a car charger, the second time, an external battery. Each time, my phone suddenly inexplicably lost the ability to communicate with a computer ever again. It can only see devices as a power source, nothing more. There's no missing software or drivers, it just doesn't register as anything to my computer. Like a power toggle so it can't tell the computer "Hey, I'm a device that you can transfer data with".
One more note; The first time this happened, I had activated developer options but had them turned off. I mean that I used USB Debugging mode once and turned all of that off. The second time, I hadn't even unhid the option yet, unhid after my phone broke again to try and fix but nope.
I did research on trying to fix it, without factory reset because a factory reset is USELESS, if it's going to happen every single time I use anything but the wall to charge it, right?
There was a topic online claiming that there is a menu under "Storage" in the settings. There isn't. It was a big fat lie. Or Android devs deleted it.
There was another topic, claiming that USB settings would be under some wireless and networks area. Nope.
Now, I remember that when my device would connect to the computer, it would let me change it from MTP to PTP, but after this happened, nothing. It doesn't even pop up anymore, nor does it ask. There is no where in the phone that these options even exist at all. It's like Android devs deleted access to these options for no reason whatsoever.
Another bit in that topic mentioned ‘USB Mass Storage’, which also doesn't exist. Here's the topic with everything I tried, if I'm allowed to give links at all. If not, well not my fault. Topics used to try and diagnose and fix issues, but failed;
[link deleted - paranoid forum rules]
[link deleted - paranoid forum rules]
(There were more but I can't remember them all, it's more or less the same as the two above)
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Translation: "To prevent spam, we want to hinder only legitimate users by making them post 10 units of spam first before they can get help with their issues by showing exact information and screenshots of their issues or steps taken given by other websites."
So. How do I get my phone to connect to computers again?
Why does it stop accepting data from computers after I use a car charger or an external battery pack?
Why would Google/Android devs choose to intentionally break your phone like this?
Code:
Hardware: L710T.03
Software: L710TVPU0AOA3
Model: SPH-LT10T
Android 4.4.2
Kernal: 3.4.0-1683363 (Ask if need more)
Build: KOT49H.L710TVPU0AOA3
Ask of need more.
Click to expand...
Click to collapse
First off, after the factory reset and everything worked did you reinstall the pdanet?
Second, 20,000mah battery? Holy cow im jealous!
Forgive me if you have already tried these things but this is what i would do...
Did you reenable developer options and reenable adb debugging?
Did you uninstall and reinstall your phone drivers?
Is there an updated phone driver?
Have you tried a different usb cord?
Is there excess dirt or dust in usb charge port on your phone?
Does your usb charge port even work anymore or do you just charge external battery on wall?
Have you tried a different usb port on the computer?
Have you tried on another computer?
Have you tried updating computer drivers?
Have you enabled a fast charge tweak like on a kernel tweak app?
If none of these questions fix it then a workaround is downloading app called airdroid. You can wirelessly transfer files from phone to computer and back again without usb cord.
Let me know what worked please! Good luck!

ZipAddict said:
1. First off, after the factory reset and everything worked did you reinstall the pdanet?
2. Second, 20,000mah battery? Holy cow im jealous!
3. Did you reenable developer options and reenable adb debugging?
4. Did you uninstall and reinstall your phone drivers?
5. Is there an updated phone driver?
6. Have you tried a different usb cord?
7. Is there excess dirt or dust in usb charge port on your phone?
8. Does your usb charge port even work anymore or do you just charge external battery on wall?
9. Have you tried a different usb port on the computer?
10. Have you tried on another computer?
11. Have you tried updating computer drivers?
12. Have you enabled a fast charge tweak like on a kernel tweak app?
13. If none of these questions fix it then a workaround is downloading app called airdroid. You can wirelessly transfer files from phone to computer and back again without usb cord.
Click to expand...
Click to collapse
1. No, I never touched PDA net again.
2. Too bad forum rules say I can't be friendly and give you the link to it.
3. Read the topic you quoted. I did, only after my phone broke again. Except it's not adb debugging, it's USB debugging. Doesn't work, because the phone can't communicate with a computer anymore.
4. 5. 11. Yes I reinstalled drivers and no there were no updates.
6. 7. Nothing's wrong with the cable. I did try with others.
8. What does that even mean? Yes my phone's port works. Nothing's wrong with any hardware.
9. 10. I've tried different ports and different computers.
12. Can't, phone isn't rooted.
13. I'm not using this. My phone is not there for Google/Android to tell me I'm not allowed to use my USB port ever again. I'm also not going to wait 4 hours for a 4 GB file to transfer via my router to my computer nor am I installing some app software to my computer just to have wireless transfer. This is not a work around. This is an "Oh well, it's broken, guess you can't ever use USB ports again for data access!"
note; I tried all of these (except 12/13) before I ever came here looking for help.

2. I will google it
3. I didnt realize toggle to turn on usb debugging didnt work sorry. I just know it needs to be on for the computer to see the phone. This seems to be an area of problem possibly.
8. Lol! What i meant was did the area where u insert charger function properly. Only reason i asked is because some of those batteries charge on wall unit made specifically to charge the battery only not with charge.
12. Doesnt require root for basic settings like changing governor usually. Only to overclock/undervolt, etc.
13. Great answer! But i meant as a temporary fix until someone more experienced with this issue helps you.
I also figured listing all those things would help other people see what you had and hadnt tried before asking you next time. Wish i couldve helped more. Good luck

ZipAddict said:
2. I will google it
3. I didnt realize toggle to turn on usb debugging didnt work sorry. I just know it needs to be on for the computer to see the phone. This seems to be an area of problem possibly.
8. Lol! What i meant was did the area where u insert charger function properly. Only reason i asked is because some of those batteries charge on wall unit made specifically to charge the battery only not with charge.
12. Doesnt require root for basic settings like changing governor usually. Only to overclock/undervolt, etc.
13. Great answer! But i meant as a temporary fix until someone more experienced with this issue helps you.
I also figured listing all those things would help other people see what you had and hadnt tried before asking you next time. Wish i couldve helped more. Good luck
Click to expand...
Click to collapse
2. amazon dot com /External-20000mAh-Limefuel-LP200X-Flashlight/dp/B00OHZVN5U/ - It let me charge my phone 7-8 times fully before it was empty. Automatically stops when your phone is full.
3. USB debugging doesn't need to be on in order for a phone to communicate with a computer. This is only if you want to debug apps or use other developer tools. File transfer works just fine without it.
8. I still don't understand what you mean. My phone is not broken in any way. Nor is my battery. My external battery charges off any USB input, my phone charges off any USB input. My phone just can't communicate data wise between devices anymore via USB.
12. Fast charge isn't going to fix my phone. Unless it disables data communication, then I need to turn it off. All "kernal tweak apps" appear to require root. The top 5 google searches shown this.

3. Wasnt sure. Ive always had it on
8. Some aftermarket batteries dont charge while in phone hooked up to charger. They come out of phone and into specialized charger for battery only not phone with it, so that it can charge the larger battery in a matter ofan hour or so is what i have been trying to say. But its obvious thats not the case for you now since i asked and clarified. If this was the case one might not know that the small usb port on their phone needed cleaning to make a good connection because they literally dont use it to charge their phone. They charge their phone with external battery charger. You see?
12. On my custom rom and on my trickstermod app it does say fast charge disables data communication and that you have to turn it off for computer to recognize phone again. This fast charge mode only works when connected to computer not wall charger it says
Wish i could be more help but im out of ideas. Good luck

Update to the current situation.
My phone is somehow, repaired. But I have no clue why. I did several things today, just screwing around while I backed up my stuff to the SD card. One of them could have fixed it, or my phone is magic and self repairs after a while. Lets list everything I can remember that I did.
1. I typed in *#9900# in my dialing app. Toggled an option called "Low battery dump" to "on".
2. I deleted a whole bunch of files, including hidden files on the internal storage. Probably screwed up my apps but, whatever, it works now.
3. I pulled the SD card out.
Shortly after all these things, I plugged it in for power, and it finally, got my computer to see it as an MTP device again. No clue which of these succeeded. I'm going to wait a small bit before I test the things that tend to break it.
The magic option, is because I tried to root, it broke, stuck in download mode with some error about firmware. For 4 hours it was stuck like this, I tried everything I could think of, which wasn't much, tried installing the ROM back too, after wasting 2 gigs of bandwidth downloading it only to get an error before it even started the install. Phone was still rebooting in download mode error screen. Left it sit there off for like a minute and it just turns it's self back on, flickers a few times and the logo pops up and the device pops on like nothing had ever happened to it. I'm so confused. :/ At least everything's back to normal. Now add a good confusion post icon below so I can click it and post. :|

VasVadum said:
12. Fast charge isn't going to fix my phone. Unless it disables data communication, then I need to turn it off.
Click to expand...
Click to collapse
this was your problem remember? fast charge does disable data communication.
VasVadum said:
Update to the current situation.
My phone is somehow, repaired. But I have no clue why. I did several things today, just screwing around while I backed up my stuff to the SD card. One of them could have fixed it, or my phone is magic and self repairs after a while. Lets list everything I can remember that I did.
1. I typed in *#9900# in my dialing app. Toggled an option called "Low battery dump" to "on".
2. I deleted a whole bunch of files, including hidden files on the internal storage. Probably screwed up my apps but, whatever, it works now.
3. I pulled the SD card out.
Shortly after all these things, I plugged it in for power, and it finally, got my computer to see it as an MTP device again. No clue which of these succeeded. I'm going to wait a small bit before I test the things that tend to break it.
The magic option, is because I tried to root, it broke, stuck in download mode with some error about firmware. For 4 hours it was stuck like this, I tried everything I could think of, which wasn't much, tried installing the ROM back too, after wasting 2 gigs of bandwidth downloading it only to get an error before it even started the install. Phone was still rebooting in download mode error screen. Left it sit there off for like a minute and it just turns it's self back on, flickers a few times and the logo pops up and the device pops on like nothing had ever happened to it. I'm so confused. :/ At least everything's back to normal. Now add a good confusion post icon below so I can click it and post. :|
Click to expand...
Click to collapse
glad whatever you did fixed it lol. have a good day

ZipAddict said:
this was your problem remember? fast charge does disable data communication.
glad whatever you did fixed it lol. have a good day
Click to expand...
Click to collapse
Except, I don't have a fast charge option anywhere. I can't toggle fast charge. My phone is unrooted and locked and such. If plugging in a device like a battery or a car charger, toggles this option and the OS developers deleted access to toggle this option, it is an OS bug and a critical issue in the device that needs to be fixed. I don't know what fixed it, but I'm assuming it was the low battery dump, and that doesn't appear to have anything to do with fast charge and it was a hidden secret option in the system.

VasVadum said:
Except, I don't have a fast charge option anywhere. I can't toggle fast charge. My phone is unrooted and locked and such. If plugging in a device like a battery or a car charger, toggles this option and the OS developers deleted access to toggle this option, it is an OS bug and a critical issue in the device that needs to be fixed. I don't know what fixed it, but I'm assuming it was the low battery dump, and that doesn't appear to have anything to do with fast charge and it was a hidden secret option in the system.
Click to expand...
Click to collapse
The way u said it i misunderstood i thought u did have it on. Its not an option on all roms though. Mine has it and i tried it and couldnt see files thru usb until i toggled it off so it was just an idea. I dont know the effects of the low battery dump off top of my head but i will remember that if i hear someone else with same problem. Glad its fixed now