I flashed the LZ kernel over CM10.1 Wild for the Night. I'm now stuck in a bootloop. I tried flashing the patched LZ kernel, but to no avail.
Can I just go back into Clockworkmod, wipe, and install a new ROM (preferably PACman ROM) through mounting USB storage?
If not, what other options do I have?
Thanks!
Do you have a backup that you can restore?
I read that the kernel will boot loop if you wipe cache and dalvik.
btoddweber said:
Do you have a backup that you can restore?
I read that the kernel will boot loop if you wipe cache and dalvik.
Click to expand...
Click to collapse
I don't have a backup, but I don't really want or need one. I can get all my stuff back in like 20 minutes. I hardly ever do any gaming.
And no, I didn't wipe anything. I just installed the kernels. I've given up on trying to install the kernel, though. I just want to install a ROM.
Will it work if I just wipe and install PACman ROM or Revolt JB through CWM?
Yep
It should long as you can boot into recovery.
btoddweber said:
Yep
It should long as you can boot into recovery.
Click to expand...
Click to collapse
Alright, thanks! That's all I wanted to know. I'll post back here in a few with the results.
EDIT: Seems to have worked. Thanks!
Related
Ok. so i searched for the problem and nothing seemed to work or be related to my issue.
I have the EV0 4G.
Its been rooted, wiped the data/cache/dalvik, flashed the rom and gapps yet it still get stuck at the boot screen.
Trying to install the Savaged-Zen ROM
My buddy, nor I can figure out whats going on here.
anyone have this issues
Thanks
socalchef00 said:
Ok. so i searched for the problem and nothing seemed to work or be related to my issue.
I have the EV0 4G.
Its been rooted, wiped the data/cache/dalvik, flashed the rom and gapps yet it still get stuck at the boot screen.
Trying to install the Savaged-Zen ROM
My buddy, nor I can figure out whats going on here.
anyone have this issues
Thanks
Click to expand...
Click to collapse
What rom were you coming from? What recovery are you using to flash and wipe? I may suggest flashing a format all zip before flashing the ROM. That will wipe your system and boot partition as well. Where are you getting stuck at? The splash screen or boot animation?
Format All, Install You Rom, wait for it too boot, then power down and install G-Apps afterwards if it hangs clear dalvik and cache
k2buckley said:
What rom were you coming from? What recovery are you using to flash and wipe? I may suggest flashing a format all zip before flashing the ROM. That will wipe your system and boot partition as well. Where are you getting stuck at? The splash screen or boot animation?
Click to expand...
Click to collapse
I am coming from the stock evo.
Was using the clockwork recovery.
I'm trying to put on savaged zen ROM.
I'm getting stuck at the boot loop after everything was wiped and then flashed.
thanks
How do you copy files on the Galaxy Nexus when you can only get into Recovery Mode?
Ugghh, I accidentally flashed Franco's milestone 5 kernel but my ROM is ICS, so it won't boot anymore. I need to get an ICS kernel back on there so I can flash it but I only have access to Recovery Mode, any suggestions?
Tried SDCARD mount but it does not work?
Post 3 of my guide.
Edit:
Using the first suggestion, would be the easiest.
Push a working kernel.zip.
Reflash your ROM
Jubakuba said:
Post 3 of my guide.
Edit:
Using the first suggestion, would be the easiest.
Push a working kernel.zip.
Click to expand...
Click to collapse
What I ended up doing before I saw this post was to reflash the ROM I already had the phone, is that okay?
I didn't do a factory wipe though, but I did wipe cache and dalvik. But, it's the same ROM I was on before I messed up and flashed the wrong kernel.
Is it okay to do this?
EDIT: I also had to flash GAPPS again, but all seems to be working as normal.
Neo3D said:
What I ended up doing before I saw this post was to reflash the ROM I already had the phone, is that okay?
I didn't do a factory wipe though, but I did wipe cache and dalvik. But, it's the same ROM I was on before I messed up and flashed the wrong kernel.
Is it okay to do this?
EDIT: I also had to flash GAPPS again, but all seems to be working as normal.
Click to expand...
Click to collapse
That's cool. You should now have the kernel that you used to have. Next time, just make sure to do backup before doing anything
Swyped on my Galaxy Nexus running AOKP with Franco Kernel, overclocked to 1.4GHz
Neo3D said:
What I ended up doing before I saw this post was to reflash the ROM I already had the phone, is that okay?
I didn't do a factory wipe though, but I did wipe cache and dalvik. But, it's the same ROM I was on before I messed up and flashed the wrong kernel.
Is it okay to do this?
EDIT: I also had to flash GAPPS again, but all seems to be working as normal.
Click to expand...
Click to collapse
kyokeun1234 said:
That's cool. You should now have the kernel that you used to have. Next time, just make sure to do backup before doing anything
Swyped on my Galaxy Nexus running AOKP with Franco Kernel, overclocked to 1.4GHz
Click to expand...
Click to collapse
Exactly. Also, after having a backup, we can restore only the kernel with advance restore feature, no need to restore the whole rom.
i have been running the kiss kernel for a while now, last night i tried to flash the hellboy kernel and retern to my pacman rom. but it still boots, i have cleared all my caches formated everything but my sd card, have tried flashing all kiss kernels and multipul hellboy kernels, but never gets passed the boot screen.. any ideas?
i managed to get it to the android is upgrading.. starting apps thing, but it gets stuck there.
Did you wipe anything when you flashed the kernel? If the kernel was for jellybean it shouldn't hang like that... not sure?
lilrob1213 said:
Did you wipe anything when you flashed the kernel? If the kernel was for jellybean it shouldn't hang like that... not sure?
Click to expand...
Click to collapse
yeah i wiped the cache, devlink cache, data, system, and a factory reset, been trying to figure it out all day but have not made much improvement
JARR3DF15CH3R said:
yeah i wiped the cache, devlink cache, data, system, and a factory reset, been trying to figure it out all day but have not made much improvement
Click to expand...
Click to collapse
and you installed a rom after wiping those things right? I'm assuming... but just wondering. What rom did you flash and are you CDMA virgin mobile?
lilrob1213 said:
and you installed a rom after wiping those things right? I'm assuming... but just wondering. What rom did you flash and are you CDMA virgin mobile?
Click to expand...
Click to collapse
yeah i installed it after, pacman http://forum.xda-developers.com/showthread.php?t=1948770&page=12
im with telus gsm. the rom was working fine, but i went to change the kernel to hellboy cause i herd it was a bit better and now im in this bootloop
also not running the newest version of that rom, i am running v15a
Oh okay wellllll I'm on virgin mobile and I don't know much about the primou phones and rom and kernel compatibility so I'm afraid I'll have to leave this to someone who knows more... good luck to you though... maybe try booting into bootloader from the recovery and flash the boot.img you had before then flash the rom again?
lilrob1213 said:
Oh okay wellllll I'm on virgin mobile and I don't know much about the primou phones and rom and kernel compatibility so I'm afraid I'll have to leave this to someone who knows more... good luck to you though... maybe try booting into bootloader from the recovery and flash the boot.img you had before then flash the rom again?
Click to expand...
Click to collapse
thanks anyways, ill be sure to give that a try:silly:
Did u wait Little longer time while first boot???? Choose latest kernel n flash. .
Hit thanks if I helped u!!!
bahubali67 said:
Did u wait Little longer time while first boot???? Choose latest kernel n flash. .
Hit thanks if I helped u!!!
Click to expand...
Click to collapse
yeah i always wait a little while, i have chosen latest kernel, has not made a difference, i have gotten better results using an older one of the titanium kiss, hellboy doesnt seem to work with my phone for some reason
Did you use the command
fastboot flash boot boot.img or just
fastboot boot boot.img?
Also,after flashing it,does the terminal say something like this?
Okay.
Okay.
Finished.
Edit:also,see that you are flashing the kernel in the fastboot screen(where it says 'fastboot usb'),and not in the Hboot(bootloader) screen.
mihirengg19 said:
Did you use the command
fastboot flash boot boot.img or just
fastboot boot boot.img?
Also,after flashing it,does the terminal say something like this?
Okay.
Okay.
Finished.
Edit:also,see that you are flashing the kernel in the fastboot screen(where it says 'fastboot usb'),and not in the Hboot(bootloader) screen.
Click to expand...
Click to collapse
i am using the all in one tool kit to flash my kernel, yes i am in fastboot, a window pops up runs through code and my phone reboots, i have changed the kernel on it before, but for some reason this time it wont boot properly at all, the phone is currently at the " android is upgrading" screen, it was the starting apps box with the spinning circle
if you say that it is stuck at android is upgrading - that's because the dalvik works and it is deodexing your gapps.
so i suppose you flashed kernel, flashed rom and gapps and rebooted. well this works from time to time but you have to reboot between flashing rom and gapps.
1. download this kernel: hellboy
2. go to bootloader and flash the kernel.
3. go to recovery and: do a factory reset + wipe system - no need for wiping dalvik or cache cause factory reset does them both.
4. flash your rom
5. reboot.
6. if it boots properly, reboot to recovery and now flash GAPPS package.
1ceb0x said:
if you say that it is stuck at android is upgrading - that's because the dalvik works and it is deodexing your gapps.
so i suppose you flashed kernel, flashed rom and gapps and rebooted. well this works from time to time but you have to reboot between flashing rom and gapps.
1. download this kernel: hellboy
2. go to bootloader and flash the kernel.
3. go to recovery and: do a factory reset + wipe system - no need for wiping dalvik or cache cause factory reset does them both.
4. flash your rom
5. reboot.
6. if it boots properly, reboot to recovery and now flash GAPPS package.
Click to expand...
Click to collapse
thank you so much 1ceb0x! my phone has been in this bootloop for an entire 24 hours,
1ceb0x said:
if you say that it is stuck at android is upgrading - that's because the dalvik works and it is deodexing your gapps.
so i suppose you flashed kernel, flashed rom and gapps and rebooted. well this works from time to time but you have to reboot between flashing rom and gapps.
1. download this kernel:
2. go to bootloader and flash the kernel.
3. go to recovery and: do a factory reset + wipe system - no need for wiping dalvik or cache cause factory reset does them both.
4. flash your rom
5. reboot.
6. if it boots properly, reboot to recovery and now flash GAPPS package.
Click to expand...
Click to collapse
hey icebox, i have the same problem, stuck on pacman logo
can you tell me which hellboy kernel should i use?
i've flashed the 1st one on the mediafire list. thanks!
chikuera said:
hey icebox, i have the same problem, stuck on pacman logo
can you tell me which hellboy kernel should i use?
i've flashed the 1st one on the mediafire list. thanks!
Click to expand...
Click to collapse
Thats the old version.... See the changelog code and flash dat in future..... Right now.... Here u go....
http://www.mediafire.com/?waggdha1ir1lxz0
OK. I flashed the wrong kernel on my new Nexus 7 (2013). My stupid, I flashed the kernel (franco) for the old Nexus 7 on the new one.
Luckily, I can still access bootloader and recovery (TWP). Now it's stuck at Google (again, I can still go to bootloader and recoery).
Where can I find the stock kernel that I can use? Or Can I flash a custom kernel?
Thank you in advance and I appreciate every comment.
http://forum.xda-developers.com/showthread.php?t=2380380
I recommend flashing a custom kernel.
Username invalid said:
http://forum.xda-developers.com/showthread.php?t=2380380
I recommend flashing a custom kernel.
Click to expand...
Click to collapse
Thank you indeed.
opticaldh said:
Thank you indeed.
Click to expand...
Click to collapse
I have flashed this kernel http://forum.xda-developers.com/showthread.php?t=2390173
and I'm still stuck at Google, I can go to bootloader and recvery (TWP). Please help me (
Have you considered trying this which will return your Nexus 7 to its original factory settings with a stock image? I haven't used this method but it may get your tablet working again. Also, for future reference, you should always make a nandroid backup before you flash something new in case you run into problems like this.
Wiping the cache/dalvik cache usually works for me when it would hang on the boot screen after a flash.
Username invalid said:
Wiping the cache/dalvik cache usually works for me when it would hang on the boot screen after a flash.
Click to expand...
Click to collapse
I did it but nothing changes
Do you have a ROM installed?
Try restoring to factory settings, reflashing a ROM, and then flashing the kernel. Wipe cache/dalvik once you're done and see if that works.
cyberprodigy said:
Do you have a ROM installed?
Try restoring to factory settings, reflashing a ROM, and then flashing the kernel. Wipe cache/dalvik once you're done and see if that works.
Click to expand...
Click to collapse
I'm running on STock, so I have to download a custom ROM, right?
and how to restoring to factory settngs, btw? in twp, a factory reset is wipes data, cach and dalvik. I did that.
opticaldh said:
I'm running on STock, so I have to download a custom ROM, right?
and how to restoring to factory settngs, btw? in twp, a factory reset is wipes data, cach and dalvik. I did that.
Click to expand...
Click to collapse
Try flashing the stock rooted ROM here.
To restore to factory settings, go to "Wipe" then slide the slider at the bottom of the screen.
Sent from my Nexus 7 using xda app-developers app
opticaldh said:
I'm running on STock, so I have to download a custom ROM, right?
and how to restoring to factory settngs, btw? in twp, a factory reset is wipes data, cach and dalvik. I did that.
Click to expand...
Click to collapse
Thanks cyberprodigy and Username invalid for helping me.
I fixed it.
After flashing 2 custom kernels (all of them were said to be completed install) but I was stuck at Google.
So I tried to flash a stock kernel (I downloaded it from here, sorry for hotlink-ing from another forum: http://droidbasement.com/asus/razor/flo/sys-backup/jb-4.3_ota-full_n7_razor-flo.zip). I will also uploaded the stock kernel file extracted from that link in case somebody needs it but doesn't want to download the whole Stock ROM.
The file extension is .img, so for people not knowing how to flash this file, use this command
"fastboot flash boot <the file name.img>"
Thanks again.
Here is the llink to the stock kernel for N7(2013). it's 16Mb so I can't attach it.
http://www.mediafire.com/download/8t7lu3jc00mt0b9/bootN7.img
my s2 was being glitchy so i went into recovery to wipe cache and dalvik and then rebooted from recovery. i waited and then it just boooot loops and shuts off. im currently using cwm recovery 5.2.7 or something like that. will i be able to flash the newer roms like CyanogenMod 10.2 with that current recovery? and why did the wiping of cache and dalvik booot looped my phone? i thought wiping those just makes my phone less glitchy
You probably had some other issues to cause phone to be glitchy in the first place.
When flashing a new ROM it's recommend you wipe data, system cache and dalvik cache.(cache and dalvik can be wipe after the ROM install before rebooting)
nooob 4 ever said:
im currently using cwm recovery 5.2.7 or something like that. will i be able to flash the newer roms like CyanogenMod 10.2 with that current recovery?
Click to expand...
Click to collapse
No, you are going to have to update to either the newest TWRP or CWM to flash 4.3 ROMs.
I'm gonna jump in and hope this isn't a hijack. I had a similar experience but I wanted to update to the latest TWRP so I could flash a 4.3 ROM (Simbean) .
I Odined in and flashed TWRP 2.6.3. Was able to flash the Slimbean ROM but on first reboot I can't make it past the Samsung screen.
I can get back into TWRP but everything fails. - typical process. "Fix permissions- Success", then "Full wipe - Success" then "Fix permissions (cause I'm trying anything at this point)- Failed"
In TWRP Restoring backups "Failed" Flashing new image "Failed" In between I've tried Erasing everything but the MicroSD card and starting fresh but Noting will install.
I've reflashed TWRP through ODIN but same issue. A couple of times I've got a restore to work but if the phone sleeps it won't wake up. I can only get back to TWRP.
What is the Nuclear Option? Or have I done that already? I've been flashing for years. I've never seen anything like this.
Help.
pairustwo said:
In TWRP Restoring backups "Failed" Flashing new image "Failed" In between I've tried Erasing everything but the MicroSD card and starting fresh but Noting will install.
I've reflashed TWRP through ODIN but same issue. A couple of times I've got a restore to work but if the phone sleeps it won't wake up. I can only get back to TWRP.
What is the Nuclear Option? Or have I done that already? I've been flashing for years. I've never seen anything like this.
Help.
Click to expand...
Click to collapse
Some people have problems with 2.6.3.0. Try to Odin 2.6.1.0 and see if it helps.
http://techerrata.com/browse/twrp2/hercules
help
so what are my options to fix my phone with the current cwm 5.0.27?
nooob 4 ever said:
so what are my options to fix my phone with the current cwm 5.0.27?
Click to expand...
Click to collapse
i can get into cwm and thats it
nooob 4 ever said:
i can get into cwm and thats it
Click to expand...
Click to collapse
Nothing, that recovery is good for 4.1.2 and lower, of u want newer roms u can go to my beanstalk thread or @ThdDude's hellybean thread and the new recoveries are posted...
Sent from a soup'd up Herc while climbing a giant beanstalk to crazy heights.....
what I did is to hold the power button/ remove the battery of your phone. Open it again and wait for it to start. no bootloop.