Related
Okay, I searched before posting. Here is my steps.
I was on SKYNOTE 8.2 and wanted to go back to stock and see what At&t's update was about.
Once back to stock, I rooted my phone and have been on this setup for about 2 weeks.
I was in the original thread and saw the new 4.2.2 Collective AoCP / CM10.1 ROM.
I wanted to try it out.
Using TWRP's latest, followed all instructions and when rebooting it still has stock root ROM.
What am I doing wrong?
I thought it was TWRP so I went to an earlier ver, still no change.
I've tried 4 times now to flash this 4.2.2 Rom and nothing.
Factory Reset
Wiped Dalvik
Install Zip
Install gapps
It says to wipe cache and data again
then boot up
It boots up alright, right into my old phone.
Any input I can get is appreciated guys !!!! Thanks.
Copy the ROM to your device (some storage folder)
Boot directly to TWRP
Manually install the ROM and the appropriate GAPPS
(watch the script window and see what it says.. look for errors)
Clear caches and dalvik
reboot
LuckyColdJohnson said:
Okay, I searched before posting. Here is my steps.
I was on SKYNOTE 8.2 and wanted to go back to stock and see what At&t's update was about.
Once back to stock, I rooted my phone and have been on this setup for about 2 weeks.
I was in the original thread and saw the new 4.2.2 Collective AoCP / CM10.1 ROM.
I wanted to try it out.
Using TWRP's latest, followed all instructions and when rebooting it still has stock root ROM.
What am I doing wrong?
I thought it was TWRP so I went to an earlier ver, still no change.
I've tried 4 times now to flash this 4.2.2 Rom and nothing.
Factory Reset
Wiped Dalvik
Install Zip
Install gapps
It says to wipe cache and data again
then boot up
It boots up alright, right into my old phone.
Any input I can get is appreciated guys !!!! Thanks.
Click to expand...
Click to collapse
Try wiping cache/delvik cache, then factory reset twice, then system wipe twice, Install .zip, Install GApps, then wipe cache/delvik again(don't wipe data after .zip is installed. That's how I always do it and it works great.
I think its my recovery Twrp. I changed something.
adam_wingert said:
Try wiping cache/delvik cache, then factory reset twice, then system wipe twice, Install .zip, Install GApps, then wipe cache/delvik again(don't wipe data after .zip is installed. That's how I always do it and it works great.
Click to expand...
Click to collapse
I have tried everything. Its got to be the recovery. No matter what I do in twrp, nothing changes. It says updating partitions and stimulating actions
. It also says successful. After updating to the newest twrp it started this. I changed something. ##[email protected] went into settings and reset....nothing. What if I flashed CWM and then went back to TWRP.
LuckyColdJohnson said:
I have tried everything. Its got to be the recovery. No matter what I do in twrp, nothing changes. It says updating partitions and stimulating actions
. It also says successful. After updating to the newest twrp it started this. I changed something. ##[email protected] went into settings and reset....nothing. What if I flashed CWM and then went back to TWRP.
Click to expand...
Click to collapse
Try cf auto root to reinstall stock then reinstall twrp through odin
Sent from my GT-N7105 using xda premium
What have I done ?
Android The Greek said:
Try cf auto root to reinstall stock then reinstall twrp through odin
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Okay guys....This has made me sick to my stomach.....I have tried all the different methods. I even soft bricked my phone today using CWM.
Kies wouldnt even fix my phone.
I had to download stock firmware and flash via Odin to get back.
Installed TWRP
Rooted
Went into recovery and wiped everything again
Installed the custom ROM
Rebooted
TWRP didnt do anything even though it says it did.
My phone boots up like normal with Att logo and works but no Custom Rom and no wipes.
What is this? Im going to try other things but wow, this is crazy.
On my SD card I have alot of stuff. I also have a folder named TWRP, it has a back up in there. I wonder if I should remove that?
IDK,,,,,Stuck with Stock root for now. Help If you can. Never had this issue before. What a day
LuckyColdJohnson said:
Okay guys....This has made me sick to my stomach.....I have tried all the different methods. I even soft bricked my phone today using CWM.
Kies wouldnt even fix my phone.
I had to download stock firmware and flash via Odin to get back.
Installed TWRP
Rooted
Went into recovery and wiped everything again
Installed the custom ROM
Rebooted
TWRP didnt do anything even though it says it did.
My phone boots up like normal with Att logo and works but no Custom Rom and no wipes.
What is this? Im going to try other things but wow, this is crazy.
On my SD card I have alot of stuff. I also have a folder named TWRP, it has a back up in there. I wonder if I should remove that?
IDK,,,,,Stuck with Stock root for now. Help If you can. Never had this issue before. What a day
Click to expand...
Click to collapse
Might as well try everything. wipe your sd card in twrp,if that doesn't work reformat through android when booted. Then copy the custom rom over and try again. Only other thing I can think to try is to check that all partitions that are needed are mounted, or try CWM instead.
Also, how did you install TWRP? Through the app? that is the best way to do it, I have had problems flashing twrp through CWM or through the computer. If you aren't already, use goomanager to install it. TWRP has instructions on their website
I figured it out!!!!!!!
Doggydude said:
Might as well try everything. wipe your sd card in twrp,if that doesn't work reformat through android when booted. Then copy the custom rom over and try again. Only other thing I can think to try is to check that all partitions that are needed are mounted, or try CWM instead.
Also, how did you install TWRP? Through the app? that is the best way to do it, I have had problems flashing twrp through CWM or through the computer. If you aren't already, use goomanager to install it. TWRP has instructions on their website
Click to expand...
Click to collapse
It was the settings in TWRP. One of the boxes was checked. Sim actions for theming. I unchecked that and was on my way. Rocking The Collective AoCP now !!!!! Yes.....Thanks to all of you for your input. I'm going back to each and will hit thanks right now! Thanks again XDA members.
Lucky
I'm glad things worked out... isn't it amazing how attached we get to our toys
Sent from my GT-N7105 using Tapatalk 2
Hi
I was flashing back to Stock from task650 to fix my gps. Well something blew up and when the phone reboots the screen goes black but I hear the AT&T start-up tune. Essentially I can't get to enable USB debugging to reflash. I can get to download or recovery, but there are no files to recover<?> and busybox never got installed.
What do I do now?
Do you have the stock recovery now? If so, try going in there and resetting to defaults. That helps sometimes.
Otherwise, you may need to Odin back to stock if you still want to go stock.
CZ Eddie said:
Do you have the stock recovery now? If so, try going in there and resetting to defaults. That helps sometimes.
Otherwise, you may need to Odin back to stock if you still want to go stock.
Click to expand...
Click to collapse
Yes I have stock recovery. Odin is of no use because it hangs waiting for the USB debug to respond. And i can't turn it on because the screen is black and I can't navigate
Do you have a micro sd card? If so, throw a rom on there. If you want to go back to stock, there' a flashable stock zip at the bottom of post #2 in the link in my signature. Under the emergency toolkit section. Flash that, turn on use debugging, do your gps fix and continue on with the task release
xBeerdroiDx said:
Do you have a micro sd card? If so, throw a rom on there. If you want to go back to stock, there' a flashable stock zip at the bottom of post #2 in the link in my signature. Under the emergency toolkit section. Flash that, turn on use debugging, do your gps fix and continue on with the task release
Click to expand...
Click to collapse
Thanks. I created an emergency tool kit on an SD, I wiped data, wiped cache and Davlik and formated system. Flashed the stock rom. When I rebooted it now hung at the Samsung Galaxy S III screen.
How do I get out of this mess?
Try wiping data and cache again in recovery
xBeerdroiDx said:
Try wiping data and cache again in recovery
Click to expand...
Click to collapse
I've wiped data and cache several times, and format/system. I've even tried to flash CWM 6.0.3.1 and I get a status 7 error. Nothing is taking.I get signature failures.
I re downloaded all the files figuring they were corrupted. Nothing doing. I need some real help, because this is beyond my abilities to figure out.,
Now I've got a red triangle showing up in recovery.
BertMor said:
I've wiped data and cache several times, and format/system. I've even tried to flash CWM 6.0.3.1 and I get a status 7 error. Nothing is taking.I get signature failures.
I re downloaded all the files figuring they were corrupted. Nothing doing. I need some real help, because this is beyond my abilities to figure out.,
Now I've got a red triangle showing up in recovery.
Click to expand...
Click to collapse
i dont know why some of these things are not working correctly for you. you're seeing the red triangle because you have stock recovery now from the stock firmware zip. you cannot flash anything in stock recovery nor can you format /system. what happens when you boot up after a factory reset and cache wipe?
a couple of your options include either using odin to flash the stock firmware back onto your device or to use odin to flash a custom recovery back and make a move from there.
xBeerdroiDx said:
i dont know why some of these things are not working correctly for you. you're seeing the red triangle because you have stock recovery now from the stock firmware zip. you cannot flash anything in stock recovery nor can you format /system. what happens when you boot up after a factory reset and cache wipe?
a couple of your options include either using odin to flash the stock firmware back onto your device or to use odin to flash a custom recovery back and make a move from there.
Click to expand...
Click to collapse
When it rains it pours. Now I can't get into recovery. I get the empty battery graphic cycling on and off, and its very warm to the touch. I think the battery is not charging.
I tried using Odin and flashed a stock rom but I kept getting verification errors and status 7 errors. Things just are not taking. I fear I've got a hard brick and I don't know what to do to fix it.
I appreciate your help
aaaaand let the questions roll:
you got verification errors in odin? and after flashing the firmware, i'm assuming you then flashed cwm and that's where you were getting the status 7 errors?
at what point did it all go off? i need to know what order you did all of these things.
can you still get into download mode?
xBeerdroiDx said:
aaaaand let the questions roll:
you got verification errors in odin? and after flashing the firmware, i'm assuming you then flashed cwm and that's where you were getting the status 7 errors?
at what point did it all go off? i need to know what order you did all of these things.
can you still get into download mode?
Click to expand...
Click to collapse
No, it won't go into download. I initially flashed stock rom, but I don't think I wiped anything. That was probably the big mistake. I used something called Samsung S3 QCom tool kit to do an initial flash. It never failed me before. And I also flashed a CWM.
I followed your advice and made a emergency SD kit and flashed from there. I did a clean flash several times. Things just never worked and I kept getting those error messages. Then it just got more difficult to get into download. Now it just flashes a drained battery
it might indeed be drained. leave it plugged in for a while and report back.
you were getting the error/status 7 messages after you flashed cwm back on it likely because the cwm wasnt up-to-date.
what was the last thing you tried before it stopped working altogether?
It gets really hot if I leave it plugged in. But it seems like I can get into recovery again. The last thing I flashed was CMW 6.0.3.1. But what is on it now is CMW 5.5.0.4
actually, what you're saying is the last thing you flashed was cwm 5.5.0.4, just via odin not cwm.
if the phone was in my hands, i would:
flash the cwm 6.0.3.1 zip, select advanced and reboot recovery. now you will be in the updated cwm recovery.
perform a full wipe: wipe data, cache, dalvik, format /system, format /data
flash rom and gapps. if you're going to stick with tasks, use the 4/23 release. i'm on that with no feature or stability issues.
wipe data, wipe cache, reboot.
give it a few minutes to boot up.
BertMor said:
No, it won't go into download. I initially flashed stock rom, but I don't think I wiped anything. That was probably the big mistake. I used something called Samsung S3 QCom tool kit to do an initial flash. It never failed me before. And I also flashed a CWM.
I followed your advice and made a emergency SD kit and flashed from there. I did a clean flash several times. Things just never worked and I kept getting those error messages. Then it just got more difficult to get into download. Now it just flashes a drained battery
Click to expand...
Click to collapse
xBeerdroiDx said:
actually, what you're saying is the last thing you flashed was cwm 5.5.0.4, just via odin not cwm.
if the phone was in my hands, i would:
flash the cwm 6.0.3.1 zip, select advanced and reboot recovery. now you will be in the updated cwm recovery.
perform a full wipe: wipe data, cache, dalvik, format /system, format /data
flash rom and gapps. if you're going to stick with tasks, use the 4/23 release. i'm on that with no feature or stability issues.
wipe data, wipe cache, reboot.
give it a few minutes to boot up.
Click to expand...
Click to collapse
Nope. When I try to flash CWM 6.0.3.1 I get an assert failed error. I came across this fix, I wonder if it is safe to try http://mobotechie.com/tips-tricks/how-to-fix-android-custom-rom-status-7-installation-abort-assert-failed-error-in-recovery-easily-ultimate-guide
BertMor said:
Nope. When I try to flash CWM 6.0.3.1 I get an assert failed error. I came across this fix, I wonder if it is safe to try http://mobotechie.com/tips-tricks/how-to-fix-android-custom-rom-status-7-installation-abort-assert-failed-error-in-recovery-easily-ultimate-guide
Click to expand...
Click to collapse
Well I think I managed it!. First I tried to install an update d/l'ed from Dropbox and that did nothing. Then I flashed an old .tar that was a rooted stock and it rebooted!
I tried editing the updater-script but I couldn't getit to save the changes properly.
Well I will now re flash the RM and CWM and hope for the best
Thanks for all your help, greatly appreciated
My T-Mobile Galaxy s4 M919 will not boot after any custom ROM flashes. I tried 4 different ROMs with success messages. As soon as I reboot my phone after the ROM flash, it's stuck at the Samsung Galaxy S4 logo and would not enter the "phone desktop". I can easily enter download mode and recovery mode without any issue.
Background: I rooted with Odin successfully. (Used both CWM and OUDHS with the same no-boot results after flashing any custom ROMs). I can restore back to stock and phone boot up fine but tried root again and then with custom ROM and it would not boot. Any help would appreciate it.
After flashing a rom, go into recovery, and erase stuff. Like cache and dalvik cache. Possibly even data
Sent from my SGH-M919 using XDA Premium 4 mobile app
Android_Monsters said:
After flashing a rom, go into recovery, and erase stuff. Like cache and dalvik cache. Possibly even data
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I did that after each ROM flash. 1. Wipe data/factory reset, 2. wipe cache part, 3. wipe dalvik cache. Did not fix the problem. No good. Please clarify "possibly even data". I am not sure which wipe is that.
anothersaddream said:
I did that after each ROM flash. 1. Wipe data/factory reset, 2. wipe cache part, 3. wipe dalvik cache. Did not fix the problem. No good. Please clarify "possibly even data". I am not sure which wipe is that.
Click to expand...
Click to collapse
using CWM:
*wipe data/factory reset
*wipe cache
*wipe, dalvik cache
*wipe system
*wipe sdcard (only if you have the ROMs you plan on flashing on your external sdcard, this will erase internal sd)
now flash your ROM of choice. reboot (will take 1-2min on first boot)
use cwm touch. what ROMs have you tried so far?
I am thinking you are flashing something not specific to the TMo S4, so your not getting the right kernel installed. Try installing a TMo specific kernel immediately after flashing a rom and see what happens.
Yeah, what ROMs have you tried already? Have you tried TWRP 2.5 recovery?
Sometimes it'll take up to 10 minutes to boot up (I haven't experienced this yet with the GS4, but I have with other phones). How long did you wait before determining it was just stuck?
I switched to PhilZ Touch Recovery a couple of weeks ago and have not had Any issues as I did before.
TWRP 2.5.0.2 was issue free for months, until I started flashing ROMs with Aroma.
Nothing but issues re Samsung splash screen freezes, different solutions working sometimes and sometimes not, having to ODIN back to stock on many occasions, having to wipe INTERNAL SD on many occasions, etc., etc.
PhilZ was the solution.
This is coming from a hard core TWRP guy......
Check the link in Red in my sig for PhilZ and other good stuff
dynospectrum said:
using CWM:
*wipe data/factory reset
*wipe cache
*wipe, dalvik cache
*wipe system
*wipe sdcard (only if you have the ROMs you plan on flashing on your external sdcard, this will erase internal sd)
now flash your ROM of choice. reboot (will take 1-2min on first boot)
use cwm touch. what ROMs have you tried so far?
Click to expand...
Click to collapse
Where do you "wipe system"? I see a format /system inside Mounts and Storage Menu. Please confirm.
DKYang said:
Yeah, what ROMs have you tried already? Have you tried TWRP 2.5 recovery?
Sometimes it'll take up to 10 minutes to boot up (I haven't experienced this yet with the GS4, but I have with other phones). How long did you wait before determining it was just stuck?
Click to expand...
Click to collapse
I have not tried TWRP 2.5 recovery yet. I mostly use CWM. I have waited 20+ minutes after flashing a custom ROMs but to no success.
I have done the following ROMs:
Insanity v1
VirginROM
stevessvt said:
I am thinking you are flashing something not specific to the TMo S4, so your not getting the right kernel installed. Try installing a TMo specific kernel immediately after flashing a rom and see what happens.
Click to expand...
Click to collapse
I did try the InFamous ROM for Tmobile s4. This ROM also has a kernal. Same results, stuck at Samsung Galaxy s4 Logo screen. It would not go anywhere after that.
Really needing help here.
anothersaddream said:
I did try the InFamous ROM for Tmobile s4. This ROM also has a kernal. Same results, stuck at Samsung Galaxy s4 Logo screen. It would not go anywhere after that.
Really needing help here.
Click to expand...
Click to collapse
Okay let's start over from scratch.
First off can you restore the stock ROM using your nandroid backup?
Second, I don't think you are properly wiping everything prior to flashing the new ROM. You need to wipe system, data, dalvik, and cache in the CWM wipe menu prior to flashing the new ROM.
Wipe all 4 things. Wiping any less than all 4 things will cause the problems you are experiencing.
Once you've done that, then flash the ROM.zip and reboot and it should work just fine.
anothersaddream said:
Where do you "wipe system"? I see a format /system inside Mounts and Storage Menu. Please confirm.
Click to expand...
Click to collapse
wipe = format
yes, format system in mounts/storage.
Skipjacks said:
Okay let's start over from scratch.
First off can you restore the stock ROM using your nandroid backup?
Second, I don't think you are properly wiping everything prior to flashing the new ROM. You need to wipe system, data, dalvik, and cache in the CWM wipe menu prior to flashing the new ROM.
Wipe all 4 things. Wiping any less than all 4 things will cause the problems you are experiencing.
Once you've done that, then flash the ROM.zip and reboot and it should work just fine.
Click to expand...
Click to collapse
I did exactly what you stated. Restored to stock. Rooted successfully. Wiped all 4 things. ROM flash stated success. Still NO good. Stuck samsung S4 logo. You think there is something wrong with the hardware???? The s4 does randomly reboot on stock.
anothersaddream said:
I did exactly what you stated. Restored to stock. Rooted successfully. Wiped all 4 things. ROM flash stated success. Still NO good. Stuck samsung g4 logo. You think there is something wrong with the hardware???? The s4 does randomly reboot on stock.
Click to expand...
Click to collapse
When I was flashing ROMs w/Aroma using TWRP 2.5.0.2, I would sometimes get Samsung boot screen freezes. The only way I could resolve this was by wiping Internal SD, in addition to the other wipes mentioned, and flashing the ROM again.
find stock kernel, flash the roms you want and flash the stock kernel after and see if you boot
Biker1 said:
When I was flashing ROMs w/Aroma using TWRP 2.5.0.2, I would sometimes get Samsung boot screen freezes. The only way I could resolve this was by wiping Internal SD, in addition to the other wipes mentioned, and flashing the ROM again.
Click to expand...
Click to collapse
I also tried your suggestion exactly what you stated. Restored to stock. Rooted successfully. Wiped all 4 things + format /sdcard (internal SD). ROM flash stated success. Still NO good. Still Stuck Samsung S4 logo.
Is there any custom ROMs I can flash using odin?
anothersaddream said:
I also tried your suggestion exactly what you stated. Restored to stock. Rooted successfully. Wiped all 4 things + format /sdcard (internal SD). ROM flash stated success. Still NO good. Still Stuck Samsung S4 logo.
Is there any custom ROMs I can flash using odin?
Click to expand...
Click to collapse
ODIN Samsung Stock Firmware.
Boot.
ODIN Custom Recovery.
(I use PhilZ Touch Recovery. Flashes ROMs flawlessly )
Boot.
Flash custom ROM afterwards.
If ROM doesn't have Root, then Root with CF-AUTO-ROOT by Chainfire via ODIN prior to installing Custom Recovery.
Then flash custom ROM.
Biker1 said:
ODIN Samsung Stock Firmware.
Boot.
ODIN Custom Recovery.
(I use PhilZ Touch Recovery. Flashes ROMs flawlessly )
Boot.
Flash custom ROM afterwards.
If ROM doesn't have Root, then Root with CF-AUTO-ROOT by Chainfire via ODIN prior to installing Custom Recovery.
Then flash custom ROM.
Click to expand...
Click to collapse
I did as you stated. I love Philz Touch recovery UI. Very nice. Unfortunately, did not work as well. It stated successfully. I tried 2 rom, Infamous S4 v.2.5 and also the VirginROM v2.3.1. Both stated successful flashed but would not boot into the phone desktop. Stuck for over 10 minutes on black and white "Samsung Galaxy S4" logo.
I will send you a nice Starbucks gift card if anyone can fix this problem.
anothersaddream said:
I did as you stated. I love Philz Touch recovery UI. Very nice. Unfortunately, did not work as well. It stated successfully. I tried 2 rom, Infamous S4 v.2.5 and also the VirginROM v2.3.1. Both stated successful flashed but would not boot into the phone desktop. Stuck for over 10 minutes on black and white "Samsung Galaxy S4" logo.
I will send you a nice Starbucks gift card if anyone can fix this problem.
Click to expand...
Click to collapse
I have no idea why it ain't working for you.
On the plus side, I don't know everything
If you ODINd Stock.
ODINd Recovery.
Did a Md5 Checksum match between the ROM file and your Download.
Wiped Internal SD.
Flashed the ROM......
and you're still having issues.......
I'm at a loss....
Try again is my only suggestion, and insure the steps taken are correct, including ODINing the proper files for your device.
Check & Double check
Including making sure you have a good usb cable, which sometimes can work and sometimes not....
If you haven't, try flashing from internal sd card. Maybe remove th external sd card just in case.
Hello,
I have a unique issue. I'm having a problem installing any custom rom on my t999 (tmobile). I have been using a custom rom for over a year. Always used TWRP. Started with Paranoid Android and for the last few months I've been using PAC-Man (nightly) roms. I was having gps lock issues, I decided to upgrade the modem to a leaked UVUEMJC, this fixed the gps lock issue. But after the reboot, I was stuck on bootloader screen. The only way I could get the rom to work was to backup the rom, flash the system and data, and after that, the rom would work until reboot. I did this a few times until it stopped working. My efs was corrupted, IMEI missing, To recover it, I went into download mode, and noticed in red Warranty bit =1. I used odin to flashed a rooted cf 4.3 samsung touchwiz rom (root66_TMO_T999UVUEMJC). All imei/efs issues were fixed. I decided to try installing a custom rom again, PAC-Man rom, it installed just fine, all EFS/IMEI info was intact, but at reboot, I got stuck on the CM bootlogo. This happens everytime. IF I recover a backup, it gets stuck on the boot logo. I'm using TWRP v2.6.3.
Anybody have any suggestions on how to fix this issue?
Thanks!
Install TWRP 2.6.3.1. Then take a Nandroid.
Next wipe /Data. Then flash your Custom Rom. Wipe Dalvik + Cache after the Flash. Reboot and report.
Perseus71 said:
Install TWRP 2.6.3.1. Then take a Nandroid.
Next wipe /Data. Then flash your Custom Rom. Wipe Dalvik + Cache after the Flash. Reboot and report.
Click to expand...
Click to collapse
Thanks for the reply Perseus71. I'll give it a shot!
acedik said:
Thanks for the reply Perseus71. I'll give it a shot!
Click to expand...
Click to collapse
Upgrading to the newest TWRP did the trick! Everything is working fine now. :good:
Thanks for the help!
I'm also having trouble flashing PAC-man.
SGH-T999LUVUBMK4
Factory reset everything, wiped SD card.
Tried latest TWRP and CWM.
Suggestions?
D
Donny Orbit said:
I'm also having trouble flashing PAC-man.
SGH-T999LUVUBMK4
Factory reset everything, wiped SD card.
Tried latest TWRP and CWM.
Suggestions?
D
Click to expand...
Click to collapse
You need to post info about the error
Sent from my SGH-M919 using Tapatalk
It says
E: Error executing updater binary in zip '/external
Error flashing zip '/external_sd/pac_d2tmo-night
I tried flashing the Rom that doc fixed specifically for the T999LTE for the CM10.1.2 also with no avail.
Same problem.
D
wipe Dalvik and Cache before trying the rom again. If
Hi, I'm on the 4.4.2 version of the Sickness, with the MDL bootloader. I've updated the modem to NH7.
Do I need to go through the whole process of updating the firmware, re-rooting, etc., or can I just do a full wipe and update to the Sickness' 4.4.4 V3?
I tried a full wipe and installing it today, but I ran into bootloops/other failures.
its better to use the latest recovery like twrp becuz in twrp 2.8.0.1 which is the latest recovery you can choose wipe and then advance wipe and choose dalvik cache,system,data and cache then wipe and that normally takes care of the boot loops
rblckmnjr84 said:
its better to use the latest recovery like twrp becuz in twrp 2.8.0.1 which is the latest recovery you can choose wipe and then advance wipe and choose dalvik cache,system,data and cache then wipe and that normally takes care of the boot loops
Click to expand...
Click to collapse
CWM and Philz also allow you to wipe system, data, cache, and even the non-existent Dalvik cache partition.... Your post makes it sound like TWRP is the only recovery that does that Just saying..
jonnyboy2040 said:
Hi, I'm on the 4.4.2 version of the Sickness, with the MDL bootloader. I've updated the modem to NH7.
Do I need to go through the whole process of updating the firmware, re-rooting, etc., or can I just do a full wipe and update to the Sickness' 4.4.4 V3?
I tried a full wipe and installing it today, but I ran into bootloops/other failures.
Click to expand...
Click to collapse
As to your question; you should be able to do a full wipe (system/data/cache and even though it literally does nothing because the partition doesn't exist, dalvik) and then flash with no problems. I would say that since you're still one of us few lucky ones still with MDL bootloaders, try to keep an official update as a very last option!
Were you trying to flash a kernel or any other mods along with the ROM? If so, flash only the ROM itself and see how it works.
You say bootloops/other failures... that means you bootloop a lot, and when you don't bootloop something else happens. Could you be more specific on the "other failures?" Any error messages? Were you able to pull a logcat? Did you compare the MD5's? Doesn't sound like a bad download, but you never know...
i understand what you saying however i ran into the same problem using philz touch and got the latest twrp and havent got stuck in boot loops since i read a forum on this and using older recovery to flash kitkat roms has been having people phones stuck in a boot loop and throwing errors after flashing and they updated the recovery to fix it
Sh*t, I have TWRP 2.6 and never have a problem. IMO (and some others) newer versions don't seem to play well with others. That goes for all Recoveries.
As for your issue, you might have a bad DO. Try re downloading the ROM, full wipe and then flash.
well my phone didn't like philz touch it works better with the latest twrp recovery
I actually ran into this last night with philz.. I tried flashing insane 4.4.4 v3 and got stuck in a bootlooop I couldn't recover from. It flashed v1 just fine, but it just wasn't having any of v3. I had to use Odin to flash the latest TWRP and have had no problems.... :/
lordcheeto03 said:
I actually ran into this last night with philz.. I tried flashing insane 4.4.4 v3 and got stuck in a bootlooop I couldn't recover from. It flashed v1 just fine, but it just wasn't having any of v3. I had to use Odin to flash the latest TWRP and have had no problems.... :/
Click to expand...
Click to collapse
Sickness mentioned something about a script that was causing bootlegs when flashing