Develop Bugs

Cant Flash new ROMs anymore. Please help.

Okay, I searched before posting. Here is my steps.
I was on SKYNOTE 8.2 and wanted to go back to stock and see what At&t's update was about.
Once back to stock, I rooted my phone and have been on this setup for about 2 weeks.
I was in the original thread and saw the new 4.2.2 Collective AoCP / CM10.1 ROM.
I wanted to try it out.
Using TWRP's latest, followed all instructions and when rebooting it still has stock root ROM.
What am I doing wrong?
I thought it was TWRP so I went to an earlier ver, still no change.
I've tried 4 times now to flash this 4.2.2 Rom and nothing.
Factory Reset
Wiped Dalvik
Install Zip
Install gapps
It says to wipe cache and data again
then boot up
It boots up alright, right into my old phone.
Any input I can get is appreciated guys !!!! Thanks.

Copy the ROM to your device (some storage folder)
Boot directly to TWRP
Manually install the ROM and the appropriate GAPPS
(watch the script window and see what it says.. look for errors)
Clear caches and dalvik
reboot

LuckyColdJohnson said:
Okay, I searched before posting. Here is my steps.
I was on SKYNOTE 8.2 and wanted to go back to stock and see what At&t's update was about.
Once back to stock, I rooted my phone and have been on this setup for about 2 weeks.
I was in the original thread and saw the new 4.2.2 Collective AoCP / CM10.1 ROM.
I wanted to try it out.
Using TWRP's latest, followed all instructions and when rebooting it still has stock root ROM.
What am I doing wrong?
I thought it was TWRP so I went to an earlier ver, still no change.
I've tried 4 times now to flash this 4.2.2 Rom and nothing.
Factory Reset
Wiped Dalvik
Install Zip
Install gapps
It says to wipe cache and data again
then boot up
It boots up alright, right into my old phone.
Any input I can get is appreciated guys !!!! Thanks.
Click to expand...
Click to collapse
Try wiping cache/delvik cache, then factory reset twice, then system wipe twice, Install .zip, Install GApps, then wipe cache/delvik again(don't wipe data after .zip is installed. That's how I always do it and it works great.

I think its my recovery Twrp. I changed something.
adam_wingert said:
Try wiping cache/delvik cache, then factory reset twice, then system wipe twice, Install .zip, Install GApps, then wipe cache/delvik again(don't wipe data after .zip is installed. That's how I always do it and it works great.
Click to expand...
Click to collapse
I have tried everything. Its got to be the recovery. No matter what I do in twrp, nothing changes. It says updating partitions and stimulating actions
. It also says successful. After updating to the newest twrp it started this. I changed something. ##[email protected] went into settings and reset....nothing. What if I flashed CWM and then went back to TWRP.

LuckyColdJohnson said:
I have tried everything. Its got to be the recovery. No matter what I do in twrp, nothing changes. It says updating partitions and stimulating actions
. It also says successful. After updating to the newest twrp it started this. I changed something. ##[email protected] went into settings and reset....nothing. What if I flashed CWM and then went back to TWRP.
Click to expand...
Click to collapse
Try cf auto root to reinstall stock then reinstall twrp through odin
Sent from my GT-N7105 using xda premium

What have I done ?
Android The Greek said:
Try cf auto root to reinstall stock then reinstall twrp through odin
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Okay guys....This has made me sick to my stomach.....I have tried all the different methods. I even soft bricked my phone today using CWM.
Kies wouldnt even fix my phone.
I had to download stock firmware and flash via Odin to get back.
Installed TWRP
Rooted
Went into recovery and wiped everything again
Installed the custom ROM
Rebooted
TWRP didnt do anything even though it says it did.
My phone boots up like normal with Att logo and works but no Custom Rom and no wipes.
What is this? Im going to try other things but wow, this is crazy.
On my SD card I have alot of stuff. I also have a folder named TWRP, it has a back up in there. I wonder if I should remove that?
IDK,,,,,Stuck with Stock root for now. Help If you can. Never had this issue before. What a day

LuckyColdJohnson said:
Okay guys....This has made me sick to my stomach.....I have tried all the different methods. I even soft bricked my phone today using CWM.
Kies wouldnt even fix my phone.
I had to download stock firmware and flash via Odin to get back.
Installed TWRP
Rooted
Went into recovery and wiped everything again
Installed the custom ROM
Rebooted
TWRP didnt do anything even though it says it did.
My phone boots up like normal with Att logo and works but no Custom Rom and no wipes.
What is this? Im going to try other things but wow, this is crazy.
On my SD card I have alot of stuff. I also have a folder named TWRP, it has a back up in there. I wonder if I should remove that?
IDK,,,,,Stuck with Stock root for now. Help If you can. Never had this issue before. What a day
Click to expand...
Click to collapse
Might as well try everything. wipe your sd card in twrp,if that doesn't work reformat through android when booted. Then copy the custom rom over and try again. Only other thing I can think to try is to check that all partitions that are needed are mounted, or try CWM instead.
Also, how did you install TWRP? Through the app? that is the best way to do it, I have had problems flashing twrp through CWM or through the computer. If you aren't already, use goomanager to install it. TWRP has instructions on their website

I figured it out!!!!!!!
Doggydude said:
Might as well try everything. wipe your sd card in twrp,if that doesn't work reformat through android when booted. Then copy the custom rom over and try again. Only other thing I can think to try is to check that all partitions that are needed are mounted, or try CWM instead.
Also, how did you install TWRP? Through the app? that is the best way to do it, I have had problems flashing twrp through CWM or through the computer. If you aren't already, use goomanager to install it. TWRP has instructions on their website
Click to expand...
Click to collapse
It was the settings in TWRP. One of the boxes was checked. Sim actions for theming. I unchecked that and was on my way. Rocking The Collective AoCP now !!!!! Yes.....Thanks to all of you for your input. I'm going back to each and will hit thanks right now! Thanks again XDA members.
Lucky

I'm glad things worked out... isn't it amazing how attached we get to our toys
Sent from my GT-N7105 using Tapatalk 2

[Q] wiping cache and dalvik caused boot loop?

my s2 was being glitchy so i went into recovery to wipe cache and dalvik and then rebooted from recovery. i waited and then it just boooot loops and shuts off. im currently using cwm recovery 5.2.7 or something like that. will i be able to flash the newer roms like CyanogenMod 10.2 with that current recovery? and why did the wiping of cache and dalvik booot looped my phone? i thought wiping those just makes my phone less glitchy

You probably had some other issues to cause phone to be glitchy in the first place.
When flashing a new ROM it's recommend you wipe data, system cache and dalvik cache.(cache and dalvik can be wipe after the ROM install before rebooting)

nooob 4 ever said:
im currently using cwm recovery 5.2.7 or something like that. will i be able to flash the newer roms like CyanogenMod 10.2 with that current recovery?
Click to expand...
Click to collapse
No, you are going to have to update to either the newest TWRP or CWM to flash 4.3 ROMs.

I'm gonna jump in and hope this isn't a hijack. I had a similar experience but I wanted to update to the latest TWRP so I could flash a 4.3 ROM (Simbean) .
I Odined in and flashed TWRP 2.6.3. Was able to flash the Slimbean ROM but on first reboot I can't make it past the Samsung screen.
I can get back into TWRP but everything fails. - typical process. "Fix permissions- Success", then "Full wipe - Success" then "Fix permissions (cause I'm trying anything at this point)- Failed"
In TWRP Restoring backups "Failed" Flashing new image "Failed" In between I've tried Erasing everything but the MicroSD card and starting fresh but Noting will install.
I've reflashed TWRP through ODIN but same issue. A couple of times I've got a restore to work but if the phone sleeps it won't wake up. I can only get back to TWRP.
What is the Nuclear Option? Or have I done that already? I've been flashing for years. I've never seen anything like this.
Help.

pairustwo said:
In TWRP Restoring backups "Failed" Flashing new image "Failed" In between I've tried Erasing everything but the MicroSD card and starting fresh but Noting will install.
I've reflashed TWRP through ODIN but same issue. A couple of times I've got a restore to work but if the phone sleeps it won't wake up. I can only get back to TWRP.
What is the Nuclear Option? Or have I done that already? I've been flashing for years. I've never seen anything like this.
Help.
Click to expand...
Click to collapse
Some people have problems with 2.6.3.0. Try to Odin 2.6.1.0 and see if it helps.
http://techerrata.com/browse/twrp2/hercules

help
so what are my options to fix my phone with the current cwm 5.0.27?

nooob 4 ever said:
so what are my options to fix my phone with the current cwm 5.0.27?
Click to expand...
Click to collapse
i can get into cwm and thats it

nooob 4 ever said:
i can get into cwm and thats it
Click to expand...
Click to collapse
Nothing, that recovery is good for 4.1.2 and lower, of u want newer roms u can go to my beanstalk thread or @ThdDude's hellybean thread and the new recoveries are posted...
Sent from a soup'd up Herc while climbing a giant beanstalk to crazy heights.....

what I did is to hold the power button/ remove the battery of your phone. Open it again and wait for it to start. no bootloop.

[Solved] Bootloop after flashing any Touchwiz based rom

Hi,
For about a few days, I can't flash any touchwiz based rom, even the ones I could flash without any problem before. After I flash any touchwiz rom, my phone goes into a bootloop cycle. Though I can boot into recovery and download mode with key combinations. I don't know when this happened for the first time but as far as I can remember, it would be after I flashed some 4.4 AOSP rom (could be Omnirom, I'm not sure though)
What I did to recover from boot loop:
- Wipe cache, wipe dalvik cache and reboot, no joy.
- Wipe cache, wipe dalvik cache, wipe data, reboot, no joy.
- Wipe cache, wipe dalvik cache, wipe data, wipe data/media, reboot, no joy.
- Pulled out the battery between these steps too.
At first, I thought something was wrong about the aroma installer itself because the phone was getting frozen during aroma installer setup screen, then I came up that it was caused due to my older CWM version, so I updated the recovery and it didn't freze again during installation.
And by the way, I've lost my efs partition during these processes, thankfully I've had a nandroid backup from a couple of months before.
Now I'm stuck with AOSP roms and the only way I can use a touchwiz rom is to flash the stock rom via odin. But I want to use the new leaked version based Note3 featured roms.
I've seen similar topics at S4 section but I couldn't be sure if I can do the exact steps for an N7100 international device.
I'm pretty familiar with linux system and I can use adb so I can provide any kind of information you need to diagnose this issue. Thanks in advance. Best regards.
HOW I SOLVED THIS PROBLEM
- Wiped everything (system, data, sdcard, of course internal sdcard)
- Flashed n7100 16GB pit file via odin
- Flashed stock rom via odin
- During these steps, I realized that my CSC code had been changed, I've corrected it acording to my country code
- Rooted my phone again
- Flashed CWM 6.0.4.3 recovery
- Flashed DN3 V3.1 rom
- Bingo, I successifully booted into DN3 rom but had no WIFI
- Flashed MJ5 bootloader
- Rebooted, then WIFI worked without a problem
- Setup my phone and did some restore
It's all good now. Thanks for everything, I hope these steps can help someone facing the same problem.

Guys, I really need some help.. Any idea about what might the problem be?
Sent from my GT-N7100 using XDA Premium 4 mobile app

Download HD wipe script,flash the script zip via cwm/philz then try installing the rom of your choice.
I found the script from tamirda's phoenix rom thread and is very useful:http://d-h.st/fWr

Full wipe cache and reset in recovery menu, clear everything, you should be up and running.

akp.ajinkya said:
Download HD wipe script,flash the script zip via cwm/philz then try installing the rom of your choice.
I found the script from tamirda's phoenix rom thread and is very useful..
Click to expand...
Click to collapse
Thanks for the reply. I flashed this superwipe script, then flashed DN3 rom but still I got stuck at Samsung Galaxy Note II screen boot loop. I really don't understand this. What am I missing? What would happen if I wipe the entire internal memory block, I mean the whole things, even the root partition too.. I'm thinking that maybe there's some file inside the root partition that prevents me to flash touchwiz roms or perhaps something wrong about touchwiz based roms' bootloaders.. I'm truely pissed..
(InsertNameHere) said:
Full wipe cache and reset in recovery menu, clear everything, you should be up and running.
Click to expand...
Click to collapse
Have you read my first message? I remember that I've mentioned I've done already what you ask me to do.. Believe me I wouldn't shoot a new thread if I could've solved my problem with such easy steps. I've already done so many wipes, including internal SD and whatsoever.. I'm really confused and NEED help. Thanks anyway..

I think you can go for the method you mentioned.But also give a try to start fresh i.e pit file flashing...wiping everything n installing stock rom then rooting,flashing custom recovery n then installing any TW custom rom.
Also give other TW based roms a try too.

Im having the same problem but after flashing kernels (e.i. saber & perseus).
Im currently running on Tigra rom. Is this a compatibility issue or im just missing something here too?
I came across flashing bootimg but this thread http://forum.xda-developers.com/showthread.php?t=1752270
is for One S, im not sure if will work on Note 2 & haven't tried it yet.
Any suggestions? help pls...

akp.ajinkya said:
I think you can go for the method you mentioned.But also give a try to start fresh i.e pit file flashing...wiping everything n installing stock rom then rooting,flashing custom recovery n then installing any TW custom rom.
Also give other TW based roms a try too.
Click to expand...
Click to collapse
Well, the problem is gone.
What I did was the things you said.
- Wiped everything (system, data, sdcard, of course internal sdcard)
- Flashed n7100 16GB pit file via odin
- Flashed stock rom via odin
- During these steps, I realized that my CSC code had been changed, I've corrected it acording to my country code
- Rooted my phone again
- Flashed CWM 6.0.4.3 recovery
- Flashed DN3 V3.1 rom
- Bingo, I successifully booted into DN3 rom but had no WIFI
- Flashed MJ5 bootloader
- Rebooted, then WIFI worked without a problem
- Setup my phone and did some restore
It's all good now. Thanks for everything, I hope these steps can help someone facing the same problem.

Happy to help you bro

SOLVED

Hello,
It sure has been a while since I've posted in this forums. I am having some trouble on my phone. Here's the story: I was on MIUI 7, but didn't like the way it was handling memory. It kept closing apps even when there were only 3 running, so I decided to restore a previous CM backup. So, I did that and rebooted the phone. It gave an error saying that "Encryption was interrupted", yet I have never encrypted my phone. Anyway, I decided to flash CM12 with a zip I had. Rebooted, and same problem occurred. Now, I'm trying to reboot phone into recovery, but whenever I do, the screen goes black and re-displays the teamwin logo, and just does that over and over. I tried flashing recovery through fastboot, but same problem. Is my phone savable? It should be, as it isn't hard-bricked. Any help is appreciated!

How do you solve this problem? When I flash CM12, the phone repeat reboot and can't enter recovery. At last I flash the Omini ROM.

Just flash stock rom
flash stock recovery.. go to wipe data and cache.. it will work.. if not try restoring partition with the stock recovery..
you can find stock recovery in oppo community
JackYao said:
How do you solve this problem? When I flash CM12, the phone repeat reboot and can't enter recovery. At last I flash the Omini ROM.
Click to expand...
Click to collapse

sydtek said:
flash stock rom.. go to wipe data and cache.. it will work.. if not try restoring partition with the stock recovery..
you can find stock recovery in oppo community
Click to expand...
Click to collapse
Thanks, I solved the stock recovery. And wipe data and cache, but still can't flash CM rom. At last, I flash the Omini rom. Problem is it often prompt me "Storage space running out".

Try flashing oppo's stock recovery
You can only instal oppo's rom (I.e. ColorOS) in that recovery.. First you have to flash TWRP recovery and then instal the CM rom.. This will work perfectly fine, but in some case like the above the rom would not boot into CM or whatever custom ROM.. In that case you have to instal OPPO's stock recovery to make it work..
And also the insufficient storage problem can be solved by OPPO's stock recovery by using partition - restore partition..
JackYao said:
Thanks, I solved the stock recovery. And wipe data and cache, but still can't flash CM rom. At last, I flash the Omini rom. Problem is it often prompt me "Storage space running out".
Click to expand...
Click to collapse

Wiped Internal Storage; now phone reboots on loading ROMs

Hey guys,
So last night I accidentally wiped internal storage in TWRP. I guess that messed up my partitions or something, I don't know. Anyway, I can still access recovery, and I've tried to do a restore (one that I made back when I was on stock 4.4.2 I think) but after that it tries to boot, gets to "Android is upgrading... Optimizing app Y of X." and once that operation completes it shows the lockscreen for about a tenth of a second, and the phone reboots.
I'm stumped. Anyone know what can I do?
Sorry if this has been asked a hundred times. For some reason the search function in the forums isn't working for me. And I've been looking for a solution all morning.
EDIT: FYI when I tried the restore I did only System and Data and not Boot, because I was afraid that'd cause more problems.

Did you try restoring and performing a factory wipe before booting the newly-restored ROM?

It seems that Marshmallow based roms aren't working, but Lollipop ones will boot. Not sure why as I didn't have any problem with the same MM roms in the past.
More info:
MM roms wont flash in TWRP; after the failed attempt, TWRP says system cannot be mounted until I either wipe or install a 12.1 rom.
Tried to install a stock rom (4.4.2) and it failed in TWRP. Just says "Error Flashing"

Are you performing a full wipe (system, Dalvik, cache, data) before installing or restoring a ROM? Is the phone running the latest version of TWRP?

audit13 said:
Are you performing a full wipe (system, Dalvik, cache, data) before installing or restoring a ROM? Is the phone running the latest version of TWRP?
Click to expand...
Click to collapse
Yes to full wipe. TWRP is 2.8.7.0, so yeah I think it's the newest? Not 100% sure.

Wiping internal storage should not affect the partitions. I'm not sure that TWRP even has the ability to change partitions.
Yes, 2.8.7.0 is the latester version of TWRP.
If you are on the nj2 bootloader, try flashing this in TWRP: http://forum.xda-developers.com/galaxy-s3-att/general/rooted-ucufnj1-stock-rom-t2985006

Welp, seems to be all good now. Not sure if I really did anything to fix it or not. I tried to install a stock ROM but it wouldn't boot (stuck on Samsung logo) but after that my CM13 ROM installed properly again. The one CM13 ROM I have still wont install at all - maybe that file became corrupt or something? Not sure if that's even possible.
Either way I'm all fixed up. Thanks for all your help.
Cheers

Glad you got it sorted out. If you do figure out what you did to get it working, post your answer as it may help others that are in a similar situation.